[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1bff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-F7FFF write-through [ 0.000000] F8000-F8FFF uncachable [ 0.000000] F9000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 01C000000 mask FFC000000 uncachable [ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001bff0000 (usable) [ 0.000000] modified: 000000001bff0000 - 000000001bff3000 (ACPI NVS) [ 0.000000] modified: 000000001bff3000 - 000000001c000000 (ACPI data) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001bff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001bc00000 page 2M [ 0.000000] 001bc00000 - 001bff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1bff0000 @ 10000-15000 [ 0.000000] RAMDISK: 143ac000 - 1503347d [ 0.000000] ACPI: RSDP 000f8f80 00014 (v00 P4M80P) [ 0.000000] ACPI: RSDT 1bff3040 00028 (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1bff30c0 00074 (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1bff3180 040CF (v01 P4M80P AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 1bff0000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 447MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1bff0000 [ 0.000000] low ram: 0 - 1bff0000 [ 0.000000] node 0 low ram: 00000000 - 1bff0000 [ 0.000000] node 0 bootmap 00011000 - 00014800 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [00143ac000 - 001503347d] RAMDISK ==> [00143ac000 - 001503347d] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b406e] BRK ==> [00008b1000 - 00008b406e] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001bff0 [ 0.000000] HighMem 0x0001bff0 -> 0x0001bff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001bff0 [ 0.000000] On node 0 totalpages: 114559 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 864 pages used for memmap [ 0.000000] Normal zone: 109712 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3ff0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c1400000 s74936 r0 d23368 u4194304 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113663 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=c8b005d5-6cad-4a39-9ce9-2245c9076781 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2293120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 430820k/458688k available (4539k kernel code, 27064k reserved, 1928k data, 620k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xdc7f0000 - 0xff7fe000 ( 560 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 797.993 MHz processor. [ 0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.98 BogoMIPS (lpj=3191972) [ 0.008082] Security Framework initialized [ 0.008171] AppArmor: AppArmor initialized [ 0.008199] Mount-cache hash table entries: 512 [ 0.008593] Initializing cgroup subsys ns [ 0.008607] Initializing cgroup subsys cpuacct [ 0.008627] Initializing cgroup subsys memory [ 0.008658] Initializing cgroup subsys devices [ 0.008669] Initializing cgroup subsys freezer [ 0.008680] Initializing cgroup subsys net_cls [ 0.008738] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008752] CPU: L2 Cache: 128K (64 bytes/line) [ 0.008780] Performance Events: [ 0.008795] Checking 'hlt' instruction... OK. [ 0.026035] SMP alternatives: switching to UP code [ 0.062483] Freeing SMP alternatives: 31k freed [ 0.062557] ACPI: Core revision 20090903 [ 0.082027] ACPI: setting ELCR to 0200 (from 8e00) [ 0.084063] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.084094] ftrace: allocating 21003 entries in 42 pages [ 0.105045] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.105059] weird, boot CPU (#0) not listed by the BIOS. [ 0.105068] SMP motherboard not detected. [ 0.105078] Local APIC not detected. Using dummy APIC emulation. [ 0.105087] SMP disabled [ 0.105516] Brought up 1 CPUs [ 0.105529] Total of 1 processors activated (1595.98 BogoMIPS). [ 0.106062] CPU0 attaching NULL sched-domain. [ 0.106497] devtmpfs: initialized [ 0.107736] regulator: core version 0.5 [ 0.107914] NET: Registered protocol family 16 [ 0.108381] EISA bus registered [ 0.108409] ACPI: bus type pci registered [ 0.116830] PCI: PCI BIOS revision 2.10 entry at 0xfa9b0, last bus=1 [ 0.116841] PCI: Using configuration type 1 for base access [ 0.119973] bio: create slab at 0 [ 0.122284] ACPI: EC: Look up EC in DSDT [ 0.143090] ACPI: Interpreter enabled [ 0.143104] ACPI: (supports S0 S5) [ 0.143153] ACPI: Using PIC for interrupt routing [ 0.158099] ACPI: No dock devices found. [ 0.158422] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.158564] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.159105] pci 0000:00:01.0: supports D1 [ 0.159195] pci 0000:00:0f.0: reg 10 io port: [0xfc00-0xfc07] [ 0.159216] pci 0000:00:0f.0: reg 14 io port: [0xf800-0xf803] [ 0.159236] pci 0000:00:0f.0: reg 18 io port: [0xf400-0xf407] [ 0.159256] pci 0000:00:0f.0: reg 1c io port: [0xf000-0xf003] [ 0.159276] pci 0000:00:0f.0: reg 20 io port: [0xec00-0xec0f] [ 0.159297] pci 0000:00:0f.0: reg 24 io port: [0xe800-0xe8ff] [ 0.159423] pci 0000:00:10.0: reg 20 io port: [0xe400-0xe41f] [ 0.159474] pci 0000:00:10.0: supports D1 D2 [ 0.159486] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.159501] pci 0000:00:10.0: PME# disabled [ 0.159591] pci 0000:00:10.1: reg 20 io port: [0xe000-0xe01f] [ 0.159642] pci 0000:00:10.1: supports D1 D2 [ 0.159653] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.159668] pci 0000:00:10.1: PME# disabled [ 0.159758] pci 0000:00:10.2: reg 20 io port: [0xdc00-0xdc1f] [ 0.159808] pci 0000:00:10.2: supports D1 D2 [ 0.159819] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.159834] pci 0000:00:10.2: PME# disabled [ 0.159923] pci 0000:00:10.3: reg 20 io port: [0xd800-0xd81f] [ 0.159974] pci 0000:00:10.3: supports D1 D2 [ 0.159985] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160021] pci 0000:00:10.3: PME# disabled [ 0.160086] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdfff000-0xfdfff0ff] [ 0.160163] pci 0000:00:10.4: supports D1 D2 [ 0.160175] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160189] pci 0000:00:10.4: PME# disabled [ 0.160392] pci 0000:00:11.5: reg 10 io port: [0xd400-0xd4ff] [ 0.160472] pci 0000:00:11.5: supports D1 D2 [ 0.160540] pci 0000:00:12.0: reg 10 io port: [0xcc00-0xccff] [ 0.160561] pci 0000:00:12.0: reg 14 32bit mmio: [0xfdffe000-0xfdffe0ff] [ 0.160632] pci 0000:00:12.0: supports D1 D2 [ 0.160644] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160658] pci 0000:00:12.0: PME# disabled [ 0.160766] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.160787] pci 0000:01:00.0: reg 14 32bit mmio: [0xfb000000-0xfbffffff] [ 0.160830] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.160869] pci 0000:01:00.0: supports D1 D2 [ 0.160944] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.160960] pci 0000:00:01.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.160978] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.161001] pci_bus 0000:00: on NUMA node 0 [ 0.161021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.261290] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) [ 0.261915] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *15 [ 0.262550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) [ 0.263096] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.263623] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.264143] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.264646] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.265147] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.265577] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.265590] vgaarb: loaded [ 0.266038] SCSI subsystem initialized [ 0.266259] libata version 3.00 loaded. [ 0.266533] usbcore: registered new interface driver usbfs [ 0.266583] usbcore: registered new interface driver hub [ 0.266682] usbcore: registered new device driver usb [ 0.267153] ACPI: WMI: Mapper loaded [ 0.267162] PCI: Using ACPI for IRQ routing [ 0.267635] NetLabel: Initializing [ 0.267643] NetLabel: domain hash size = 128 [ 0.267651] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.267702] NetLabel: unlabeled traffic allowed by default [ 0.267839] Switching to clocksource tsc [ 0.270340] AppArmor: AppArmor Filesystem Enabled [ 0.270390] pnp: PnP ACPI init [ 0.270442] ACPI: bus type pnp registered [ 0.279633] pnp: PnP ACPI: found 12 devices [ 0.279646] ACPI: ACPI bus type pnp unregistered [ 0.279660] PnPBIOS: Disabled by ACPI PNP [ 0.279702] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved [ 0.279719] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved [ 0.279735] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.279751] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.279768] system 00:00: iomem range 0x1bff0000-0x1bffffff could not be reserved [ 0.279785] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.279802] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.279818] system 00:00: iomem range 0x100000-0x1bfeffff could not be reserved [ 0.279835] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.279852] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.279880] system 00:02: ioport range 0x400-0x47f has been reserved [ 0.279896] system 00:02: ioport range 0x500-0x50f has been reserved [ 0.279922] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.279937] system 00:03: ioport range 0x800-0x87f has been reserved [ 0.279953] system 00:03: ioport range 0x880-0x8ff has been reserved [ 0.279968] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.315250] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.315266] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.315283] pci 0000:00:01.0: MEM window: 0xfb000000-0xfcffffff [ 0.315300] pci 0000:00:01.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.315337] pci 0000:00:01.0: setting latency timer to 64 [ 0.315356] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.315370] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.315385] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.315399] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.315413] pci_bus 0000:01: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.315555] NET: Registered protocol family 2 [ 0.315936] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.317127] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.317520] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.317919] TCP: Hash tables configured (established 16384 bind 16384) [ 0.317930] TCP reno registered [ 0.318249] NET: Registered protocol family 1 [ 0.318337] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.318493] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.318526] pci 0000:01:00.0: Boot video device [ 0.318867] Scanning for low memory corruption every 60 seconds [ 0.319197] audit: initializing netlink socket (disabled) [ 0.319242] type=2000 audit(1146450765.316:1): initialized [ 0.354135] Trying to unpack rootfs image as initramfs... [ 0.389716] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.408485] VFS: Disk quotas dquot_6.5.2 [ 0.408816] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.411371] fuse init (API version 7.13) [ 0.411749] msgmni has been set to 842 [ 0.412603] alg: No test for stdrng (krng) [ 0.412893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.412906] io scheduler noop registered [ 0.412916] io scheduler anticipatory registered [ 0.412925] io scheduler deadline registered [ 0.413103] io scheduler cfq registered (default) [ 0.413493] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.413584] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.413880] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.413897] ACPI: Power Button [PWRB] [ 0.414097] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.414119] ACPI: Sleep Button [SLPB] [ 0.414355] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.414368] ACPI: Power Button [PWRF] [ 0.420965] isapnp: Scanning for PnP cards... [ 0.430354] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.430545] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.431426] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.484831] brd: module loaded [ 0.486804] loop: module loaded [ 0.487253] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.493427] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.493444] PCI: setting IRQ 11 as level-triggered [ 0.493465] pata_acpi 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.493486] pata_acpi 0000:00:0f.0: VIA VLink IRQ fixup, from 15 to 11 [ 0.493656] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.495011] Fixed MDIO Bus: probed [ 0.495160] PPP generic driver version 2.4.2 [ 0.495352] tun: Universal TUN/TAP device driver, 1.6 [ 0.495362] tun: (C) 1999-2004 Max Krasnyansky [ 0.495695] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.502799] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.502815] PCI: setting IRQ 10 as level-triggered [ 0.502836] ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.502891] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.503157] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.503284] ehci_hcd 0000:00:10.4: irq 10, io mem 0xfdfff000 [ 0.512988] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.513413] usb usb1: configuration #1 chosen from 1 choice [ 0.513526] hub 1-0:1.0: USB hub found [ 0.513561] hub 1-0:1.0: 8 ports detected [ 0.513764] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.513830] uhci_hcd: USB Universal Host Controller Interface driver [ 0.515460] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.515480] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.515513] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.515710] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.515772] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e400 [ 0.516254] usb usb2: configuration #1 chosen from 1 choice [ 0.516367] hub 2-0:1.0: USB hub found [ 0.516397] hub 2-0:1.0: 2 ports detected [ 0.516575] uhci_hcd 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.516603] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.516738] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.516786] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e000 [ 0.517131] usb usb3: configuration #1 chosen from 1 choice [ 0.517234] hub 3-0:1.0: USB hub found [ 0.517262] hub 3-0:1.0: 2 ports detected [ 0.517421] uhci_hcd 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.517438] uhci_hcd 0000:00:10.2: VIA VLink IRQ fixup, from 15 to 11 [ 0.517474] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.517594] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.517638] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000dc00 [ 0.517983] usb usb4: configuration #1 chosen from 1 choice [ 0.518086] hub 4-0:1.0: USB hub found [ 0.518115] hub 4-0:1.0: 2 ports detected [ 0.518280] uhci_hcd 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.518297] uhci_hcd 0000:00:10.3: VIA VLink IRQ fixup, from 15 to 11 [ 0.518336] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.518459] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.518504] uhci_hcd 0000:00:10.3: irq 11, io base 0x0000d800 [ 0.518864] usb usb5: configuration #1 chosen from 1 choice [ 0.518976] hub 5-0:1.0: USB hub found [ 0.519004] hub 5-0:1.0: 2 ports detected [ 0.519324] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.525499] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.525535] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.526099] mice: PS/2 mouse device common for all mice [ 0.526577] rtc_cmos 00:05: RTC can wake from S4 [ 0.526742] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.526793] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.527267] device-mapper: uevent: version 1.0.3 [ 0.530202] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.532118] device-mapper: multipath: version 1.1.0 loaded [ 0.532134] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.532764] EISA: Probing bus 0 at eisa.0 [ 0.532841] EISA: Detected 0 cards. [ 0.532851] cpuidle: using governor ladder [ 0.532861] cpuidle: using governor menu [ 0.534839] TCP cubic registered [ 0.535560] NET: Registered protocol family 10 [ 0.541354] lo: Disabled Privacy Extensions [ 0.542781] NET: Registered protocol family 17 [ 0.542920] Using IPI No-Shortcut mode [ 0.543282] registered taskstats version 1 [ 0.547859] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.548372] rtc_cmos 00:05: setting system clock to 2006-05-01 02:32:46 UTC (1146450766) [ 0.548388] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.548397] EDD information not available. [ 1.120280] isapnp: No Plug & Play device found [ 2.282178] Freeing initrd memory: 12829k freed [ 2.306195] Freeing unused kernel memory: 620k freed [ 2.307766] Write protecting the kernel text: 4540k [ 2.307903] Write protecting the kernel read-only data: 1668k [ 2.392991] udev: starting version 151 [ 3.081041] Linux agpgart interface v0.103 [ 3.094633] sata_via 0000:00:0f.0: version 2.4 [ 3.094680] sata_via 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 3.094798] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 3.095007] scsi0 : sata_via [ 3.095737] scsi1 : sata_via [ 3.096167] ata1: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 11 [ 3.096182] ata2: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 11 [ 3.104297] agpgart: Detected VIA VT3314 chipset [ 3.116812] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 3.300081] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 3.512067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.676306] ata2.00: ATA-8: OCZ-VERTEX2, 1.28, max UDMA/133 [ 3.676322] ata2.00: 107463888 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.708369] ata2.00: configured for UDMA/133 [ 3.708710] scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.28 PQ: 0 ANSI: 5 [ 3.709299] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.710192] sd 1:0:0:0: [sda] 107463888 512-byte logical blocks: (55.0 GB/51.2 GiB) [ 3.710342] sd 1:0:0:0: [sda] Write Protect is off [ 3.710356] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.710433] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.710930] sda: sda1 sda2 < sda5 > [ 3.713524] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.736925] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.736949] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 3.737062] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 3.748449] vga16fb: initializing [ 3.748469] vga16fb: mapped to 0xc00a0000 [ 3.748946] fb0: VGA16 VGA frame buffer device [ 3.758969] eth0: VIA Rhine II at 0xfdffe000, 00:40:63:ef:5f:23, IRQ 11. [ 3.759697] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 3.982047] Console: switching to colour frame buffer device 80x30 [ 4.840215] xor: automatically using best checksumming function: pIII_sse [ 4.860035] pIII_sse : 1769.000 MB/sec [ 4.860046] xor: using function: pIII_sse (1769.000 MB/sec) [ 4.909776] device-mapper: dm-raid45: initialized v0.2594b [ 5.138532] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 6.056934] Adding 2240504k swap on /dev/sda5. Priority:-1 extents:1 across:2240504k SS [ 6.732287] udev: starting version 151 [ 7.664985] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.695391] lp: driver loaded but no devices found [ 8.067790] parport_pc 00:09: reported by Plug and Play ACPI [ 8.067836] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 8.156735] lp0: using parport0 (interrupt-driven). [ 8.531619] ppdev: user-space parallel port driver [ 8.668620] psmouse serio1: ID: 10 00 64 [ 9.063034] type=1505 audit(1146421975.011:2): operation="profile_load" pid=562 name="/sbin/dhclient3" [ 9.072752] type=1505 audit(1146421975.023:3): operation="profile_load" pid=562 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.073470] type=1505 audit(1146421975.023:4): operation="profile_load" pid=562 name="/usr/lib/connman/scripts/dhclient-script" [ 9.296120] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 10.270733] type=1505 audit(1146421976.219:5): operation="profile_load" pid=665 name="/usr/share/gdm/guest-session/Xsession" [ 10.308567] eth0: link down [ 10.313198] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.321901] type=1505 audit(1146421976.271:6): operation="profile_replace" pid=666 name="/sbin/dhclient3" [ 10.323076] type=1505 audit(1146421976.271:7): operation="profile_replace" pid=666 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.323757] type=1505 audit(1146421976.271:8): operation="profile_replace" pid=666 name="/usr/lib/connman/scripts/dhclient-script" [ 10.467293] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 10.467474] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 10.498407] type=1505 audit(1146421976.447:9): operation="profile_load" pid=671 name="/usr/bin/evince" [ 10.515483] type=1505 audit(1146421976.463:10): operation="profile_load" pid=671 name="/usr/bin/evince-previewer" [ 10.526097] type=1505 audit(1146421976.475:11): operation="profile_load" pid=671 name="/usr/bin/evince-thumbnailer" [ 13.170731] [drm] Initialized drm 1.1.0 20060810 [ 13.189143] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 13.191724] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 13.203156] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 13.203217] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 13.203347] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 35.982402] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 35.982462] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 35.982592] pci 0000:01:00.0: putting AGP V3 device into 8x mode [65679.096177] usb 1-2: new high speed USB device using ehci_hcd and address 2 [65679.299967] usb 1-2: configuration #1 chosen from 1 choice [65679.511758] Initializing USB Mass Storage driver... [65679.520156] scsi2 : SCSI emulation for USB Mass Storage devices [65679.525138] usbcore: registered new interface driver usb-storage [65679.525155] USB Mass Storage support registered. [65679.542490] usb-storage: device found at 2 [65679.542503] usb-storage: waiting for device to settle before scanning [65684.552411] usb-storage: device scan complete [65684.554392] scsi 2:0:0:0: Direct-Access USB Flash Disk 8.07 PQ: 0 ANSI: 4 [65684.563639] sd 2:0:0:0: Attached scsi generic sg1 type 0 [65684.580896] sd 2:0:0:0: [sdb] 3893248 512-byte logical blocks: (1.99 GB/1.85 GiB) [65684.581897] sd 2:0:0:0: [sdb] Write Protect is off [65684.581916] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [65684.581928] sd 2:0:0:0: [sdb] Assuming drive cache: write through [65684.599545] sd 2:0:0:0: [sdb] Assuming drive cache: write through [65684.599571] sdb: sdb1 [65684.792566] sd 2:0:0:0: [sdb] Assuming drive cache: write through [65684.792591] sd 2:0:0:0: [sdb] Attached SCSI removable disk [65731.573073] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [65732.574756] __ratelimit: 9 callbacks suppressed [65732.574776] halcmd[1895]: segfault at 8 ip 00bc36bc sp bf98b5c0 error 6 in liblinuxcnchal.so.0[bbe000+8000] [65732.588759] halcmd[1896]: segfault at 8 ip 008376bc sp bf854fc0 error 6 in liblinuxcnchal.so.0[832000+8000] [65732.630503] halcmd[1899]: segfault at 8 ip 00c986bc sp bf84d1e0 error 6 in liblinuxcnchal.so.0[c93000+8000] [65732.857474] halcmd[1903]: segfault at 8 ip 00c076bc sp bfb3ac30 error 6 in liblinuxcnchal.so.0[c02000+8000] [65733.087616] halcmd[1907]: segfault at 8 ip 003036bc sp bfea6b10 error 6 in liblinuxcnchal.so.0[2fe000+8000] [65733.314682] halcmd[1911]: segfault at 8 ip 0036b6bc sp bfab7270 error 6 in liblinuxcnchal.so.0[366000+8000] [65733.551860] halcmd[1915]: segfault at 8 ip 007b06bc sp bfafecd0 error 6 in liblinuxcnchal.so.0[7ab000+8000] [65733.780018] halcmd[1919]: segfault at 8 ip 001d36bc sp bffa1220 error 6 in liblinuxcnchal.so.0[1ce000+8000] [65734.007101] halcmd[1923]: segfault at 8 ip 00d996bc sp bfefcc20 error 6 in liblinuxcnchal.so.0[d94000+8000] [65734.234159] halcmd[1927]: segfault at 8 ip 005836bc sp bf9cff20 error 6 in liblinuxcnchal.so.0[57e000+8000]