vfdmod: reading 'spindle.rpm-out' from address 8192 (0x2000)...
[01][03][20][00][00][01][8F][CA]
Waiting for a confirmation...
<01><03><02><27><10><A2><78>
vfdmod: returned value is 10000 (0x2710)

vfdmod: reading 'parameters.command-frequency' from address 8192 (0x2000)...
[01][03][20][00][00][01][8F][CA]
Waiting for a confirmation...
<01><03><02><27><10><A2><78>
vfdmod: returned value is 10000 (0x2710)

vfdmod: reading 'parameters.dc-bus-voltage' from address 12295 (0x3007)...
[01][03][30][07][00][01][3A][CB]
Waiting for a confirmation...
<01><03><02><0D><1F><FD><1C>
vfdmod: returned value is 3359 (0x0D1F)

vfdmod: reading 'parameters.output-current' from address 12290 (0x3002)...
[01][03][30][02][00][01][2A][CA]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.output-frequency' from address 12289 (0x3001)...
[01][03][30][01][00][01][DA][CA]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.output-voltage' from address 12291 (0x3003)...
[01][03][30][03][00][01][7B][0A]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: setting command speed value to 10000 (0x2710)...
[01][06][20][00][27][10][98][36]
Waiting for a confirmation...
<01><06><20><00><27><10><98><36>

vfdmod: setting control word value to 5 (0x0005)...
[01][06][10][00][00][05][4D][09]
Waiting for a confirmation...
<01><06><10><00><00><05><4D><09>

vfdmod: reading 'spindle.rpm-out' from address 8192 (0x2000)...
[01][03][20][00][00][01][8F][CA]
Waiting for a confirmation...
<01><03><02><27><10><A2><78>
vfdmod: returned value is 10000 (0x2710)

vfdmod: reading 'parameters.command-frequency' from address 8192 (0x2000)...
[01][03][20][00][00][01][8F][CA]
Waiting for a confirmation...
<01><03><02><27><10><A2><78>
vfdmod: returned value is 10000 (0x2710)

vfdmod: reading 'parameters.dc-bus-voltage' from address 12295 (0x3007)...
[01][03][30][07][00][01][3A][CB]
Waiting for a confirmation...
<01><03><02><0D><1F><FD><1C>
vfdmod: returned value is 3359 (0x0D1F)

vfdmod: reading 'parameters.output-current' from address 12290 (0x3002)...
[01][03][30][02][00][01][2A][CA]
Waiting for a confirmation...
Shutting down and cleaning up LinuxCNC...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.output-frequency' from address 12289 (0x3001)...
[01][03][30][01][00][01][DA][CA]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.output-voltage' from address 12291 (0x3003)...
[01][03][30][03][00][01][7B][0A]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: setting command speed value to 10000 (0x2710)...
[01][06][20][00][27][10][98][36]
Waiting for a confirmation...
<01><06><20><00><27><10><98><36>

vfdmod: setting control word value to 5 (0x0005)...
[01][06][10][00][00][05][4D][09]
Waiting for a confirmation...
task: 6187 cycles, min=0.000027, max=0.081976, avg=0.010038, 0 latency excursions (> 10x expected cycle time of 0.010000s)
<01><06><10><00><00><05><4D><09>
vfdmod: close request received.
vfdmod: application closed.
Note: Using POSIX realtime