Linux version 3.8.0-rtai (root@INTEL-QUAD) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #2 SMP PREEMPT Sat Sep 21 16:53:48 BST 2013 Disabled fast string operations e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved BIOS-e820: [mem 0x0000000000090000-0x000000000009e7ff] usable BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000003ee97fff] usable BIOS-e820: [mem 0x000000003ee98000-0x000000003eebefff] reserved BIOS-e820: [mem 0x000000003eebf000-0x000000003ef0efff] usable BIOS-e820: [mem 0x000000003ef0f000-0x000000003efbefff] ACPI NVS BIOS-e820: [mem 0x000000003efbf000-0x000000003eff1fff] usable BIOS-e820: [mem 0x000000003eff2000-0x000000003effefff] ACPI data BIOS-e820: [mem 0x000000003efff000-0x000000003effffff] usable BIOS-e820: [mem 0x000000003f000000-0x000000003fffffff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.7 present. DMI: /D2500HN, BIOS MUCDT10N.86A.0076.2013.0618.1644 06/18/2013 e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x3f000 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03F000000 mask FFF000000 uncachable 2 base 0FFE00000 mask FFFE00000 write-protect 3 disabled 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [mem 0x000fbe40-0x000fbe4f] mapped at [c00fbe40] initial memory mapped: [mem 0x00000000-0x017fffff] Base memory trampoline at [c009a000] 9a000 size 16384 init_memory_mapping: [mem 0x00000000-0x377fdfff] [mem 0x00000000-0x003fffff] page 4k [mem 0x00400000-0x373fffff] page 2M [mem 0x37400000-0x377fdfff] page 4k kernel direct mapping tables up to 0x377fdfff @ [mem 0x017fa000-0x017fffff] RAMDISK: [mem 0x2e4d3000-0x2f331fff] 120MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone ranges: DMA [mem 0x00010000-0x00ffffff] Normal [mem 0x01000000-0x377fdfff] HighMem [mem 0x377fe000-0x3effffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00010000-0x0008efff] node 0: [mem 0x00090000-0x0009dfff] node 0: [mem 0x00100000-0x3ee97fff] node 0: [mem 0x3eebf000-0x3ef0efff] node 0: [mem 0x3efbf000-0x3eff1fff] node 0: [mem 0x3efff000-0x3effffff] On node 0 totalpages: 257705 free_area_init_node: node 0, pgdat c13c9ac0, node_mem_map f701d200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3949 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 241 pages used for memmap HighMem zone: 30253 pages, LIFO batch:7 Using APIC driver default Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. MPTABLE: OEM ID: MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor) Processors: 1 smpboot: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 16 e820: [mem 0x40000000-0xdfffffff] available for PCI devices setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 17 pages/cpu @f7006000 s48064 r0 d21568 u69632 pcpu-alloc: s48064 r0 d21568 u69632 alloc=17*4096 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255688 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-rtai root=UUID=adb1eb59-f644-4a66-b87e-82900a244c39 ro quiet splash PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) __ex_table already sorted, skipping sort Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003f000) Memory: 1001492k/1032192k available (2886k kernel code, 29328k reserved, 1013k data, 372k init, 121976k highmem) virtual kernel memory layout: fixmap : 0xfff68000 - 0xfffff000 ( 604 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc13cf000 - 0xc142c000 ( 372 kB) .data : 0xc12d1823 - 0xc13ceec0 (1013 kB) .text : 0xc1000000 - 0xc12d1823 (2886 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. NR_IRQS:2304 nr_irqs:256 16 CPU 0 irqstacks, hard=f6806000 soft=f6808000 Interrupt pipeline (release #1) Console: colour VGA+ 80x25 console [tty0] enabled tsc: Fast TSC calibration using PIT tsc: Detected 1866.635 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.27 BogoMIPS (lpj=7466540) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8 tlb_flushall_shift: 6 Freeing SMP alternatives: 16k freed Enabling APIC mode: Flat. Using 0 I/O APICs smpboot: CPU0: Intel(R) Atom(TM) CPU D2500 @ 1.86GHz (fam: 06, model: 36, stepping: 01) Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 Brought up 1 CPUs smpboot: Total of 1 processors activated (3733.27 BogoMIPS) devtmpfs: initialized NET: Registered protocol family 16 PCI: Using configuration type 1 for base access bio: create slab at 0 vgaarb: loaded PCI: Probing PCI hardware PCI: root bus 00: using default resources PCI: Probing PCI hardware (bus 00) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [8086:0bf5] type 00 class 0x060000 pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000 pci 0000:00:02.0: reg 10: [mem 0x40100000-0x401fffff] pci 0000:00:02.0: reg 14: [io 0x20d0-0x20d7] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 pci 0000:00:1b.0: reg 10: [mem 0x40300000-0x40303fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 20: [io 0x20a0-0x20bf] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 20: [io 0x2080-0x209f] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 20: [io 0x2060-0x207f] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 pci 0000:00:1d.3: reg 20: [io 0x2040-0x205f] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 10: [mem 0x40204400-0x402047ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 pci 0000:00:1f.2: reg 10: [io 0x20c8-0x20cf] pci 0000:00:1f.2: reg 14: [io 0x20dc-0x20df] pci 0000:00:1f.2: reg 18: [io 0x20c0-0x20c7] pci 0000:00:1f.2: reg 1c: [io 0x20d8-0x20db] pci 0000:00:1f.2: reg 20: [io 0x2020-0x202f] pci 0000:00:1f.2: reg 24: [mem 0x40204000-0x402043ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 pci 0000:01:00.0: reg 10: [mem 0x40020000-0x4003ffff] pci 0000:01:00.0: reg 14: [mem 0x40000000-0x4001ffff] pci 0000:01:00.0: reg 18: [io 0x1000-0x101f] pci 0000:01:00.0: reg 1c: [mem 0x40040000-0x40043fff] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x400fffff] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27bc] PCI: setting IRQ 11 as level-triggered pci 0000:00:1c.0: found PCI INT A -> IRQ 11 pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0 pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.3 pci 0000:00:1c.0: sharing IRQ 11 with 0000:01:00.0 PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] e820: reserve RAM buffer [mem 0x3ee98000-0x3fffffff] e820: reserve RAM buffer [mem 0x3ef0f000-0x3fffffff] e820: reserve RAM buffer [mem 0x3eff2000-0x3fffffff] e820: reserve RAM buffer [mem 0x3f000000-0x3fffffff] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource refined-jiffies pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.0: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x400fffff] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 02] pci 0000:00:1c.0: found PCI INT A -> IRQ 11 pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0 pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.3 pci 0000:00:1c.0: sharing IRQ 11 with 0000:01:00.0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] pci_bus 0000:01: resource 1 [mem 0x40000000-0x400fffff] pci_bus 0000:01: resource 2 [mem 0x40400000-0x405fffff 64bit pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: setting IRQ 10 as level-triggered pci 0000:00:1d.0: found PCI INT A -> IRQ 10 pci 0000:00:1d.0: sharing IRQ 10 with 0000:00:1d.7 pci 0000:00:1d.1: found PCI INT B -> IRQ 11 pci 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2 pci 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.3 PCI: setting IRQ 9 as level-triggered pci 0000:00:1d.2: found PCI INT C -> IRQ 9 pci 0000:00:1d.3: found PCI INT D -> IRQ 11 pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:02.0 pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:1c.0 pci 0000:00:1d.3: sharing IRQ 11 with 0000:01:00.0 pci 0000:00:1d.7: found PCI INT A -> IRQ 10 pci 0000:00:1d.7: sharing IRQ 10 with 0000:00:1d.0 PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 14716k freed platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1380216521.788:1): initialized bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1746 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram TCP: cubic registered NET: Registered protocol family 17 Key type dns_resolver registered Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos rtc_cmos: setting system clock to 2013-09-26 17:28:42 UTC (1380216522) Freeing unused kernel memory: 372k freed udev: starting version 151 udevd (49): /proc/49/oom_adj is deprecated, please use /proc/49/oom_score_adj instead. e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:01:00.0: Disabling ASPM L0s L1 e1000e 0000:01:00.0: found PCI INT A -> IRQ 11 e1000e 0000:01:00.0: sharing IRQ 11 with 0000:00:02.0 e1000e 0000:01:00.0: sharing IRQ 11 with 0000:00:1c.0 e1000e 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.3 e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:01:00.0: irq 16 for MSI/MSI-X e1000e 0000:01:00.0: irq 17 for MSI/MSI-X e1000e 0000:01:00.0: irq 18 for MSI/MSI-X Linux agpgart interface v0.103 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub SCSI subsystem initialized usbcore: registered new device driver usb uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 10 uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:00:1d.7 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x000020a0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11 uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2 uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.3 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002080 [drm] Initialized drm 1.1.0 20060810 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 9 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 9, io base 0x00002060 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 11 uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:02.0 uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:1c.0 uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:01:00.0 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 11, io base 0x00002040 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: found PCI INT B -> IRQ 11 ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1d.1 ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1f.3 ahci 0000:00:1f.2: irq 19 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0x40204000 port 0x40204100 irq 19 ata2: SATA max UDMA/133 abar m1024@0x40204000 port 0x40204180 irq 19 ata3: DUMMY ata4: DUMMY gma500 0000:00:02.0: found PCI INT A -> IRQ 11 gma500 0000:00:02.0: sharing IRQ 11 with 0000:00:1c.0 gma500 0000:00:02.0: sharing IRQ 11 with 0000:00:1d.3 gma500 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0 gma500 0000:00:02.0: setting latency timer to 64 gma500 0000:00:02.0: irq 20 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a5:90:8d e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1 gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1 fbcon: psbfb (fb0) is primary device usb 3-1: new low-speed USB device number 2 using uhci_hcd ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD2500AAKX-00ERMA0, 15.01H15, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKX-0 15.0 PQ: 0 ANSI: 5 Switching to clocksource tsc usbcore: registered new interface driver usbhid usbhid: USB HID core driver Console: switching to colour frame buffer device 128x48 gma500 0000:00:02.0: fb0: psbfb frame buffer device gma500 0000:00:02.0: registered panic notifier [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) Adding 2953212k swap on /dev/sda7. Priority:-1 extents:1 across:2953212k udev: starting version 151 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.7: found PCI INT A -> IRQ 10 ehci-pci 0000:00:1d.7: sharing IRQ 10 with 0000:00:1d.0 ehci-pci 0000:00:1d.7: setting latency timer to 64 ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci-pci 0000:00:1d.7: debug port 1 lp: driver loaded but no devices found ehci-pci 0000:00:1d.7: cache line size of 64 is not supported ehci-pci 0000:00:1d.7: irq 10, io mem 0x40204400 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 3-1: USB disconnect, device number 2 microcode: CPU0 sig=0x30661, pf=0x4, revision=0x10d microcode: Microcode Update Driver: v2.00 , Peter Oruba coretemp coretemp.0: Unable to read TjMax from CPU 0 psmouse serio1: hgpk: ID: 10 00 64 EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro usb 3-1: new low-speed USB device number 3 using uhci_hcd snd_hda_intel 0000:00:1b.0: found PCI INT A -> IRQ 9 snd_hda_intel 0000:00:1b.0: irq 21 for MSI/MSI-X psmouse serio1: Failed to enable mouse on isa0060/serio1 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input0 input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input1 input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2 input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input4 hid-generic 0003:0E8F:0022.0003: input,hidraw0: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:00:1d.2-1/input0 input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.1/input/input5 hid-generic 0003:0E8F:0022.0004: input,hidraw1: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:00:1d.2-1/input1 input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 ppdev: user-space parallel port driver NET: Registered protocol family 10 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:01:00.0 eth0: 10/100 speed: disabling TSO IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready