[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe90000 (usable) [ 0.000000] BIOS-e820: 00000000dfe90000 - 00000000dfea8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfea8000 - 00000000dfed0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfed0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A89GTD-PRO/USB3, BIOS 1456 05/04/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xdfe90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000220000000 aka 8704M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 36432000 - 37211000 [ 0.000000] ACPI: RSDP 000fbaa0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT dfe90100 0005C (v01 050410 XSDT1420 20100504 MSFT 00000097) [ 0.000000] ACPI: FACP dfe90290 000F4 (v03 050410 FACP1420 20100504 MSFT 00000097) [ 0.000000] ACPI: DSDT dfe90450 0F42D (v01 A1608 A1608000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS dfea8000 00040 [ 0.000000] ACPI: APIC dfe90390 0007C (v01 050410 APIC1420 20100504 MSFT 00000097) [ 0.000000] ACPI: MCFG dfe90410 0003C (v01 050410 OEMMCFG 20100504 MSFT 00000097) [ 0.000000] ACPI: OEMB dfea8040 00072 (v01 050410 OEMB1420 20100504 MSFT 00000097) [ 0.000000] ACPI: SRAT dfe9f8a0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET dfe9f990 00038 (v01 050410 OEMHPET 20100504 MSFT 00000097) [ 0.000000] ACPI: SSDT dfe9f9d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2694MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000dfe90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfe90 [ 0.000000] On node 0 totalpages: 917023 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4832200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5390 pages used for memmap [ 0.000000] HighMem zone: 684420 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:1ff00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f7785000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909857 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=3e53dad5-aae2-47b4-a7d9-1760c1b01d56 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7336960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000dfe90) [ 0.000000] Memory: 3610904k/3668544k available (3495k kernel code, 57188k reserved, 1237k data, 416k init, 2759240k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:728 16 [ 0.000000] CPU 0 irqstacks, hard=f3c06000 soft=f3c08000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3411.224 MHz processor. [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.44 BogoMIPS (lpj=13644896) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000035] Security Framework initialized [ 0.000038] AppArmor: AppArmor disabled by boot time parameter [ 0.000051] Mount-cache hash table entries: 512 [ 0.000177] Initializing cgroup subsys cpuacct [ 0.000179] Initializing cgroup subsys memory [ 0.000184] Initializing cgroup subsys devices [ 0.000185] Initializing cgroup subsys freezer [ 0.000186] Initializing cgroup subsys net_cls [ 0.000187] Initializing cgroup subsys blkio [ 0.000191] Initializing cgroup subsys perf_event [ 0.000208] CPU: Physical Processor ID: 0 [ 0.000209] CPU: Processor Core ID: 0 [ 0.000211] mce: CPU supports 6 MCE banks [ 0.000215] LVT offset 0 assigned for vector 0xf9 [ 0.000218] using AMD E400 aware idle routine [ 0.000263] ACPI: Core revision 20120320 [ 0.103150] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.103470] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.143131] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03 [ 0.248755] Performance Events: AMD PMU driver. [ 0.248758] ... version: 0 [ 0.248760] ... bit width: 48 [ 0.248761] ... generic registers: 4 [ 0.248762] ... value mask: 0000ffffffffffff [ 0.248763] ... max period: 00007fffffffffff [ 0.248764] ... fixed-purpose events: 0 [ 0.248765] ... event mask: 000000000000000f [ 0.248791] System has AMD C1E enabled [ 0.248792] I-pipe: will not be able to use LAPIC as a tick device [ 0.248793] I-pipe: disable C1E power state in your BIOS [ 0.248800] Switch to broadcast mode on CPU0 [ 0.260884] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.272879] CPU 1 irqstacks, hard=f3c94000 soft=f3c96000 [ 0.272881] Booting Node 0, Processors #1 [ 0.283312] Initializing CPU#1 [ 0.285943] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.285952] Switch to broadcast mode on CPU1 [ 0.292880] CPU 2 irqstacks, hard=f3cc4000 soft=f3cc6000 [ 0.292882] #2 [ 0.303296] Initializing CPU#2 [ 0.305936] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.305947] Switch to broadcast mode on CPU2 [ 0.312873] CPU 3 irqstacks, hard=f3cd6000 soft=f3cd8000 [ 0.312874] #3 [ 0.323287] Initializing CPU#3 [ 0.325932] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.325943] Switch to broadcast mode on CPU3 [ 0.325957] Brought up 4 CPUs [ 0.325959] Total of 4 processors activated (27289.79 BogoMIPS). [ 0.330311] devtmpfs: initialized [ 0.330460] PM: Registering ACPI NVS region [mem 0xdfea8000-0xdfecffff] (163840 bytes) [ 0.330532] dummy: [ 0.330575] NET: Registered protocol family 16 [ 0.330627] node 0 link 0: io port [1000, ffffff] [ 0.330629] TOM: 00000000e0000000 aka 3584M [ 0.330631] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.330634] node 0 link 0: mmio [a0000, bffff] [ 0.330636] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.330638] node 0 link 0: mmio [f0000000, ffdfffff] [ 0.330640] TOM2: 0000000220000000 aka 8704M [ 0.330641] bus: [00, 07] on node 0 link 0 [ 0.330643] bus: 00 index 0 [io 0x0000-0xffff] [ 0.330644] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.330646] bus: 00 index 2 [mem 0xf0000000-0xffffffff] [ 0.330708] ACPI: bus type pci registered [ 0.330780] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.330782] PCI: not using MMCONFIG [ 0.331493] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.331494] PCI: Using configuration type 1 for base access [ 0.331496] PCI: Using configuration type 1 for extended access [ 0.331957] bio: create slab at 0 [ 0.332034] ACPI: Added _OSI(Module Device) [ 0.332035] ACPI: Added _OSI(Processor Device) [ 0.332037] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.332038] ACPI: Added _OSI(Processor Aggregator Device) [ 0.333303] ACPI: EC: Look up EC in DSDT [ 0.334795] ACPI: Executed 3 blocks of module-level executable AML code [ 0.521315] ACPI: Interpreter enabled [ 0.521323] ACPI: (supports S0 S1 S3 S4 S5) [ 0.521341] ACPI: Using IOAPIC for interrupt routing [ 0.521371] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.522837] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.522839] PCI: Using MMCONFIG for extended config space [ 0.528289] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.528415] ACPI: No dock devices found. [ 0.528419] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.528477] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.528573] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.528576] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.528577] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.528579] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.528581] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xdfffffff] [ 0.528583] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.528606] PCI host bridge to bus 0000:00 [ 0.528607] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.528609] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.528611] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.528613] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.528615] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xdfffffff] [ 0.528616] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.528626] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.528694] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.528734] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.528753] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.528776] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.528789] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.528812] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.528872] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.528891] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007] [ 0.528900] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003] [ 0.528909] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007] [ 0.528917] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003] [ 0.528926] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f] [ 0.528934] pci 0000:00:11.0: reg 24: [mem 0xfcfffc00-0xfcffffff] [ 0.528952] pci 0000:00:11.0: set SATA to AHCI mode [ 0.528993] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.529005] pci 0000:00:12.0: reg 10: [mem 0xfcffe000-0xfcffefff] [ 0.529066] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.529083] pci 0000:00:12.2: reg 10: [mem 0xfcfff800-0xfcfff8ff] [ 0.529146] pci 0000:00:12.2: supports D1 D2 [ 0.529147] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.529168] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.529179] pci 0000:00:13.0: reg 10: [mem 0xfcffd000-0xfcffdfff] [ 0.529241] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.529258] pci 0000:00:13.2: reg 10: [mem 0xfcfff400-0xfcfff4ff] [ 0.529319] pci 0000:00:13.2: supports D1 D2 [ 0.529321] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.529341] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.529407] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.529422] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.529431] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.529439] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.529448] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.529456] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.529500] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.529519] pci 0000:00:14.2: reg 10: [mem 0xfcff8000-0xfcffbfff 64bit] [ 0.529570] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.529583] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.529649] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.529684] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.529696] pci 0000:00:14.5: reg 10: [mem 0xfcffc000-0xfcffcfff] [ 0.529758] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.529810] pci 0000:00:15.0: supports D1 D2 [ 0.529834] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.529846] pci 0000:00:16.0: reg 10: [mem 0xfcff7000-0xfcff7fff] [ 0.529909] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.529926] pci 0000:00:16.2: reg 10: [mem 0xfcfff000-0xfcfff0ff] [ 0.529988] pci 0000:00:16.2: supports D1 D2 [ 0.529990] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.530008] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.530022] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.530033] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.530046] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.530060] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.530142] pci 0000:01:00.0: [10de:1189] type 00 class 0x030000 [ 0.530152] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.530162] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.530173] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.530180] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f] [ 0.530187] pci 0000:01:00.0: reg 30: [mem 0xfe580000-0xfe5fffff pref] [ 0.530232] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.530242] pci 0000:01:00.1: reg 10: [mem 0xfe57c000-0xfe57ffff] [ 0.536749] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.536754] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 0.536756] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe5fffff] [ 0.536760] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.536797] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.536812] pci 0000:02:00.0: reg 10: [mem 0xfe6fe000-0xfe6fffff 64bit] [ 0.536868] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.544742] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.544747] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.544784] pci 0000:03:00.0: [197b:2361] type 00 class 0x010185 [ 0.544849] pci 0000:03:00.0: reg 24: [mem 0xfe7fe000-0xfe7fffff] [ 0.544882] pci 0000:03:00.0: PME# supported from D3hot [ 0.544908] pci 0000:03:00.1: [197b:2361] type 00 class 0x010185 [ 0.544926] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07] [ 0.544936] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883] [ 0.544946] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807] [ 0.544956] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483] [ 0.544966] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f] [ 0.545018] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.545027] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.545030] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.545033] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.545100] pci 0000:04:07.0: [1106:3044] type 00 class 0x0c0010 [ 0.545120] pci 0000:04:07.0: reg 10: [mem 0xfe8ff800-0xfe8fffff] [ 0.545132] pci 0000:04:07.0: reg 14: [io 0xdc00-0xdc7f] [ 0.545205] pci 0000:04:07.0: supports D2 [ 0.545206] pci 0000:04:07.0: PME# supported from D2 D3hot D3cold [ 0.545249] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.545253] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.545256] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.545260] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.545262] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.545264] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.545265] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.545267] pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfffffff] (subtractive decode) [ 0.545269] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.545332] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.545348] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.545377] pci 0000:05:00.0: reg 18: [mem 0xfbfff000-0xfbffffff 64bit pref] [ 0.545395] pci 0000:05:00.0: reg 20: [mem 0xfbff8000-0xfbffbfff 64bit pref] [ 0.545407] pci 0000:05:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 0.545447] pci 0000:05:00.0: supports D1 D2 [ 0.545448] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552742] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 0.552748] pci 0000:00:15.0: bridge window [io 0xe000-0xefff] [ 0.552751] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.552756] pci 0000:00:15.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.552771] pci_bus 0000:00: on NUMA node 0 [ 0.552775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.552975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.553007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.553030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.553070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.553127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.553156] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.557859] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 14 15) [ 0.557907] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 0.557955] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 0.558002] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *10 11 14 15) [ 0.558037] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled. [ 0.558065] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled. [ 0.558093] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 14 15) [ 0.558121] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled. [ 0.558190] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.558194] vgaarb: loaded [ 0.558195] vgaarb: bridge control possible 0000:01:00.0 [ 0.558214] PCI: Using ACPI for IRQ routing [ 0.558216] PCI: pci_cache_line_size set to 64 bytes [ 0.558328] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.558330] reserve RAM buffer: 00000000dfe90000 - 00000000dfffffff [ 0.558445] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.558448] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.560483] Switching to clocksource hpet [ 0.560585] pnp: PnP ACPI init [ 0.560592] ACPI: bus type pnp registered [ 0.560654] pnp 00:00: [bus 00-ff] [ 0.560656] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.560657] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.560659] pnp 00:00: [io 0x0d00-0xffff window] [ 0.560661] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.560662] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.560664] pnp 00:00: [mem 0xdff00000-0xdfffffff window] [ 0.560667] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.560717] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.560778] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.560780] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.560810] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.561162] pnp 00:02: [dma 4] [ 0.561164] pnp 00:02: [io 0x0000-0x000f] [ 0.561166] pnp 00:02: [io 0x0081-0x0083] [ 0.561167] pnp 00:02: [io 0x0087] [ 0.561168] pnp 00:02: [io 0x0089-0x008b] [ 0.561170] pnp 00:02: [io 0x008f] [ 0.561171] pnp 00:02: [io 0x00c0-0x00df] [ 0.561196] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.561204] pnp 00:03: [io 0x0070-0x0071] [ 0.561210] pnp 00:03: [irq 8] [ 0.561234] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.561240] pnp 00:04: [io 0x0061] [ 0.561265] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.561271] pnp 00:05: [io 0x00f0-0x00ff] [ 0.561309] pnp 00:05: [irq 13] [ 0.561333] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.561821] pnp 00:06: [io 0x03f8-0x03ff] [ 0.561825] pnp 00:06: [irq 4] [ 0.561826] pnp 00:06: [dma 0 disabled] [ 0.561891] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.561916] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.561943] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.561997] pnp 00:08: [io 0x0060] [ 0.561999] pnp 00:08: [io 0x0064] [ 0.562000] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 0.562002] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 0.562042] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.562044] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.562046] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.562160] pnp 00:09: [io 0x0010-0x001f] [ 0.562161] pnp 00:09: [io 0x0022-0x003f] [ 0.562163] pnp 00:09: [io 0x0062-0x0063] [ 0.562164] pnp 00:09: [io 0x0065-0x006f] [ 0.562166] pnp 00:09: [io 0x0072-0x007f] [ 0.562168] pnp 00:09: [io 0x0080] [ 0.562169] pnp 00:09: [io 0x0084-0x0086] [ 0.562171] pnp 00:09: [io 0x0088] [ 0.562172] pnp 00:09: [io 0x008c-0x008e] [ 0.562173] pnp 00:09: [io 0x0090-0x009f] [ 0.562175] pnp 00:09: [io 0x00a2-0x00bf] [ 0.562176] pnp 00:09: [io 0x00b1] [ 0.562177] pnp 00:09: [io 0x00e0-0x00ef] [ 0.562179] pnp 00:09: [io 0x04d0-0x04d1] [ 0.562180] pnp 00:09: [io 0x040b] [ 0.562181] pnp 00:09: [io 0x04d6] [ 0.562183] pnp 00:09: [io 0x0c00-0x0c01] [ 0.562184] pnp 00:09: [io 0x0c14] [ 0.562186] pnp 00:09: [io 0x0c50-0x0c51] [ 0.562187] pnp 00:09: [io 0x0c52] [ 0.562188] pnp 00:09: [io 0x0c6c] [ 0.562189] pnp 00:09: [io 0x0c6f] [ 0.562191] pnp 00:09: [io 0x0cd0-0x0cd1] [ 0.562192] pnp 00:09: [io 0x0cd2-0x0cd3] [ 0.562194] pnp 00:09: [io 0x0cd4-0x0cd5] [ 0.562195] pnp 00:09: [io 0x0cd6-0x0cd7] [ 0.562196] pnp 00:09: [io 0x0cd8-0x0cdf] [ 0.562198] pnp 00:09: [io 0x0800-0x089f] [ 0.562199] pnp 00:09: [io 0x0000-0xffffffff disabled] [ 0.562201] pnp 00:09: [io 0x0b00-0x0b1f] [ 0.562202] pnp 00:09: [io 0x0b20-0x0b3f] [ 0.562204] pnp 00:09: [io 0x0900-0x090f] [ 0.562205] pnp 00:09: [io 0x0910-0x091f] [ 0.562206] pnp 00:09: [io 0xfe00-0xfefe] [ 0.562208] pnp 00:09: [io 0x0060] [ 0.562209] pnp 00:09: [io 0x0064] [ 0.562210] pnp 00:09: [mem 0xdff00000-0xdfffffff] [ 0.562212] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.562214] pnp 00:09: [mem 0xfec10000-0xfec1001f] [ 0.562215] pnp 00:09: [mem 0xfed80000-0xfed80fff] [ 0.562217] pnp 00:09: [mem 0x00000000-0xffffffff disabled] [ 0.562295] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.562297] system 00:09: [io 0x040b] has been reserved [ 0.562299] system 00:09: [io 0x04d6] has been reserved [ 0.562301] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.562303] system 00:09: [io 0x0c14] has been reserved [ 0.562304] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.562306] system 00:09: [io 0x0c52] has been reserved [ 0.562308] system 00:09: [io 0x0c6c] has been reserved [ 0.562310] system 00:09: [io 0x0c6f] has been reserved [ 0.562311] system 00:09: [io 0x0cd0-0x0cd1] has been reserved [ 0.562314] system 00:09: [io 0x0cd2-0x0cd3] has been reserved [ 0.562316] system 00:09: [io 0x0cd4-0x0cd5] has been reserved [ 0.562318] system 00:09: [io 0x0cd6-0x0cd7] has been reserved [ 0.562320] system 00:09: [io 0x0cd8-0x0cdf] has been reserved [ 0.562322] system 00:09: [io 0x0800-0x089f] has been reserved [ 0.562324] system 00:09: [io 0x0b00-0x0b1f] has been reserved [ 0.562325] system 00:09: [io 0x0b20-0x0b3f] has been reserved [ 0.562327] system 00:09: [io 0x0900-0x090f] has been reserved [ 0.562329] system 00:09: [io 0x0910-0x091f] has been reserved [ 0.562331] system 00:09: [io 0xfe00-0xfefe] has been reserved [ 0.562333] system 00:09: [mem 0xdff00000-0xdfffffff] has been reserved [ 0.562335] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.562337] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.562339] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.562341] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.562465] pnp 00:0a: [io 0x0000-0xffffffff disabled] [ 0.562467] pnp 00:0a: [io 0x0230-0x023f] [ 0.562468] pnp 00:0a: [io 0x0290-0x029f] [ 0.562470] pnp 00:0a: [io 0x0f40-0x0f4f] [ 0.562471] pnp 00:0a: [io 0x0a30-0x0a3f] [ 0.562513] system 00:0a: [io 0x0230-0x023f] has been reserved [ 0.562515] system 00:0a: [io 0x0290-0x029f] has been reserved [ 0.562516] system 00:0a: [io 0x0f40-0x0f4f] has been reserved [ 0.562518] system 00:0a: [io 0x0a30-0x0a3f] has been reserved [ 0.562520] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.562543] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.562582] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.562584] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.562655] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.562657] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.562658] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.562660] pnp 00:0c: [mem 0x00100000-0xdfefffff] [ 0.562661] pnp 00:0c: [mem 0xfec00000-0xffffffff] [ 0.562703] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.562705] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.562707] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.562709] system 00:0c: [mem 0x00100000-0xdfefffff] could not be reserved [ 0.562711] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.562713] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.562819] pnp: PnP ACPI: found 13 devices [ 0.562820] ACPI: ACPI bus type pnp unregistered [ 0.562822] PnPBIOS: Disabled by ACPI PNP [ 0.599465] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.599467] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 0.599470] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe5fffff] [ 0.599473] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.599476] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.599478] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.599482] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.599484] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.599487] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.599490] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.599493] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.599497] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.599504] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 0.599507] pci 0000:00:15.0: bridge window [io 0xe000-0xefff] [ 0.599511] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.599514] pci 0000:00:15.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.599548] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.599550] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.599551] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.599553] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.599555] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff] [ 0.599557] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.599558] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.599560] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe5fffff] [ 0.599562] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.599564] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.599565] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.599567] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.599569] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.599570] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.599572] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.599573] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.599575] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.599577] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] [ 0.599578] pci_bus 0000:04: resource 8 [mem 0xdff00000-0xdfffffff] [ 0.599580] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.599582] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.599583] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.599585] pci_bus 0000:05: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref] [ 0.599705] NET: Registered protocol family 2 [ 0.599750] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.599879] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.600190] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.600349] TCP: Hash tables configured (established 131072 bind 65536) [ 0.600350] TCP: reno registered [ 0.600352] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.600358] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.600473] NET: Registered protocol family 1 [ 1.660105] pci 0000:01:00.0: Boot video device [ 1.660136] PCI: CLS 64 bytes, default 64 [ 1.660168] Unpacking initramfs... [ 1.864872] Freeing initrd memory: 14204k freed [ 1.868524] LVT offset 1 assigned for vector 0x400 [ 1.868534] IBS: LVT offset 1 assigned [ 1.868546] perf: AMD IBS detected (0x0000001f) [ 1.868778] audit: initializing netlink socket (disabled) [ 1.868791] type=2000 audit(1440977583.588:1): initialized [ 1.877160] highmem bounce pool size: 64 pages [ 1.877164] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.877365] VFS: Disk quotas dquot_6.5.2 [ 1.877386] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.877476] msgmni has been set to 1691 [ 1.877625] alg: No test for stdrng (krng) [ 1.877648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.877651] io scheduler noop registered [ 1.877652] io scheduler deadline registered [ 1.877671] io scheduler cfq registered (default) [ 1.877894] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.877906] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.877907] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.878191] GHES: HEST is not enabled! [ 1.878198] isapnp: Scanning for PnP cards... [ 2.262868] isapnp: No Plug & Play device found [ 2.262922] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.283344] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.304043] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.304269] Linux agpgart interface v0.103 [ 2.304629] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.305144] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.305159] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.305266] mousedev: PS/2 mouse device common for all mice [ 2.305294] rtc_cmos 00:03: RTC can wake from S4 [ 2.305394] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.305416] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.305501] TCP: cubic registered [ 2.305593] NET: Registered protocol family 10 [ 2.305738] Mobile IPv6 [ 2.305740] NET: Registered protocol family 17 [ 2.305743] Registering the dns_resolver key type [ 2.305773] Using IPI No-Shortcut mode [ 2.305891] PM: Hibernation image not present or could not be loaded. [ 2.305899] registered taskstats version 1 [ 2.306428] rtc_cmos 00:03: setting system clock to 2015-08-30 23:33:04 UTC (1440977584) [ 2.306539] Freeing unused kernel memory: 416k freed [ 2.306706] Write protecting the kernel text: 3496k [ 2.306723] Write protecting the kernel read-only data: 984k [ 2.315951] udevd[60]: starting version 175 [ 2.325124] SCSI subsystem initialized [ 2.325388] usbcore: registered new interface driver usbfs [ 2.325404] usbcore: registered new interface driver hub [ 2.328002] usbcore: registered new device driver usb [ 2.328009] libata version 3.00 loaded. [ 2.328549] ahci 0000:00:11.0: version 3.0 [ 2.328693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.328700] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.328704] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.329188] scsi0 : ahci [ 2.329945] scsi1 : ahci [ 2.330050] scsi2 : ahci [ 2.330159] scsi3 : ahci [ 2.330271] ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 19 [ 2.330275] ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 19 [ 2.330278] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 19 [ 2.330282] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 19 [ 2.330333] ahci 0000:03:00.0: JMB361 has only one port [ 2.330341] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1 [ 2.330457] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.330477] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.330486] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.330501] QUIRK: Enable AMD PLL fix [ 2.330511] ehci_hcd 0000:00:12.2: debug port 1 [ 2.330531] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfcfff800 [ 2.339653] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.339676] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.339680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.339682] usb usb1: Product: EHCI Host Controller [ 2.339684] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 2.339686] usb usb1: SerialNumber: 0000:00:12.2 [ 2.340035] hub 1-0:1.0: USB hub found [ 2.340039] hub 1-0:1.0: 5 ports detected [ 2.340212] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.340219] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.340226] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.340247] ehci_hcd 0000:00:13.2: debug port 1 [ 2.340262] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfcfff400 [ 2.343626] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 2.343631] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.344841] scsi4 : ahci [ 2.344949] scsi5 : ahci [ 2.345016] ata5: SATA max UDMA/133 abar m8192@0xfe7fe000 port 0xfe7fe100 irq 18 [ 2.345018] ata6: DUMMY [ 2.346121] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.346132] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 2.346310] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.346314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.346316] usb usb3: Product: xHCI Host Controller [ 2.346318] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 2.346320] usb usb3: SerialNumber: 0000:02:00.0 [ 2.346384] xHCI xhci_add_endpoint called for root hub [ 2.346387] xHCI xhci_check_bandwidth called for root hub [ 2.346408] hub 3-0:1.0: USB hub found [ 2.346414] hub 3-0:1.0: 2 ports detected [ 2.346461] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.346466] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 [ 2.346721] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 2.346755] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 2.347762] scsi6 : pata_jmicron [ 2.348026] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.348587] microcode: CPU0: patch_level=0x010000b6 [ 2.348721] scsi7 : pata_jmicron [ 2.349080] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 [ 2.349082] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 [ 2.349682] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.349685] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.349687] usb usb4: Product: xHCI Host Controller [ 2.349689] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 2.349690] usb usb4: SerialNumber: 0000:02:00.0 [ 2.349751] xHCI xhci_add_endpoint called for root hub [ 2.349753] xHCI xhci_check_bandwidth called for root hub [ 2.349776] hub 4-0:1.0: USB hub found [ 2.349786] hub 4-0:1.0: 2 ports detected [ 2.351616] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.351632] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.351635] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.351638] usb usb2: Product: EHCI Host Controller [ 2.351639] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 2.351640] usb usb2: SerialNumber: 0000:00:13.2 [ 2.351719] hub 2-0:1.0: USB hub found [ 2.351722] hub 2-0:1.0: 5 ports detected [ 2.351812] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 2.351820] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 2.351827] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.351846] ehci_hcd 0000:00:16.2: debug port 1 [ 2.351859] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfcfff000 [ 2.357052] microcode: CPU0: new patch_level=0x010000c8 [ 2.357060] microcode: CPU1: patch_level=0x010000b6 [ 2.358735] microcode: CPU1: new patch_level=0x010000c8 [ 2.358742] microcode: CPU2: patch_level=0x010000b6 [ 2.360394] microcode: CPU2: new patch_level=0x010000c8 [ 2.360400] microcode: CPU3: patch_level=0x010000b6 [ 2.362083] microcode: CPU3: new patch_level=0x010000c8 [ 2.362123] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.363700] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.363716] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.363718] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.363720] usb usb5: Product: EHCI Host Controller [ 2.363722] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 2.363724] usb usb5: SerialNumber: 0000:00:16.2 [ 2.363816] hub 5-0:1.0: USB hub found [ 2.363819] hub 5-0:1.0: 4 ports detected [ 2.363915] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 2.364189] scsi8 : pata_atiixp [ 2.364262] scsi9 : pata_atiixp [ 2.364796] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.364798] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.364851] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.364860] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.364879] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfcffe000 [ 2.423627] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.423630] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.423632] usb usb6: Product: OHCI Host Controller [ 2.423633] usb usb6: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.423634] usb usb6: SerialNumber: 0000:00:12.0 [ 2.423764] hub 6-0:1.0: USB hub found [ 2.423769] hub 6-0:1.0: 5 ports detected [ 2.423835] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.423840] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 2.423852] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfcffd000 [ 2.483593] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.483596] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.483597] usb usb7: Product: OHCI Host Controller [ 2.483599] usb usb7: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.483600] usb usb7: SerialNumber: 0000:00:13.0 [ 2.483722] hub 7-0:1.0: USB hub found [ 2.483727] hub 7-0:1.0: 5 ports detected [ 2.483789] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.483794] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 2.483807] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfcffc000 [ 2.545632] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.545634] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.545636] usb usb8: Product: OHCI Host Controller [ 2.545638] usb usb8: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.545639] usb usb8: SerialNumber: 0000:00:14.5 [ 2.545775] hub 8-0:1.0: USB hub found [ 2.545781] hub 8-0:1.0: 2 ports detected [ 2.545852] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 2.545861] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 2.545874] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfcff7000 [ 2.603582] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.603585] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.603586] usb usb9: Product: OHCI Host Controller [ 2.603588] usb usb9: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.603589] usb usb9: SerialNumber: 0000:00:16.0 [ 2.603677] hub 9-0:1.0: USB hub found [ 2.603682] hub 9-0:1.0: 4 ports detected [ 2.647542] ata4: SATA link down (SStatus 0 SControl 300) [ 2.647594] ata2: SATA link down (SStatus 0 SControl 300) [ 2.651522] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.663539] ata5: SATA link down (SStatus 0 SControl 300) [ 2.784505] usb 1-1: New USB device found, idVendor=0424, idProduct=2502 [ 2.784507] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.784653] hub 1-1:1.0: USB hub found [ 2.784753] hub 1-1:1.0: 2 ports detected [ 2.819438] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.819463] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.820971] ata3.00: ATAPI: TSSTcorp CDDVDW TS-H663C, UO00, max UDMA/100 [ 2.823653] ata1.00: ATA-6: WDC WD1600JD-75HBB0, 08.02D08, max UDMA/133 [ 2.823655] ata1.00: 312500000 sectors, multi 16: LBA48 [ 2.829165] ata1.00: configured for UDMA/133 [ 2.829340] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JD-75H 08.0 PQ: 0 ANSI: 5 [ 2.867403] Refined TSC clocksource calibration: 3411.529 MHz. [ 2.867407] Switching to clocksource tsc [ 3.055858] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd [ 3.147887] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2602 [ 3.147889] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.148031] hub 1-1.1:1.0: USB hub found [ 3.148135] hub 1-1.1:1.0: 4 ports detected [ 3.235460] usb 1-1.2: new full-speed USB device number 4 using ehci_hcd [ 3.331423] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c048 [ 3.331426] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.331427] usb 1-1.2: Product: G9 Laser Mouse [ 3.331429] usb 1-1.2: Manufacturer: Logitech [ 3.331430] usb 1-1.2: SerialNumber: A35C999E060029 [ 3.337784] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input0 [ 3.337852] generic-usb 0003:046D:C048.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G9 Laser Mouse] on usb-0000:00:12.2-1.2/input0 [ 3.341704] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input1 [ 3.341815] generic-usb 0003:046D:C048.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G9 Laser Mouse] on usb-0000:00:12.2-1.2/input1 [ 3.341828] usbcore: registered new interface driver usbhid [ 3.341829] usbhid: USB HID core driver [ 3.419743] usb 1-1.1.1: new high-speed USB device number 5 using ehci_hcd [ 3.597996] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 3.597998] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.598000] usb 1-1.1.1: Product: Flash Card Reader [ 3.598002] usb 1-1.1.1: Manufacturer: Generic [ 3.598003] usb 1-1.1.1: SerialNumber: 26020128B005 [ 3.599657] Initializing USB Mass Storage driver... [ 3.599751] scsi10 : usb-storage 1-1.1.1:1.0 [ 3.599802] usbcore: registered new interface driver usb-storage [ 3.599804] USB Mass Storage support registered. [ 3.621825] ata3.00: configured for UDMA/100 [ 3.683165] usb 1-1.1.2: new low-speed USB device number 6 using ehci_hcd [ 3.783999] usb 1-1.1.2: New USB device found, idVendor=04ca, idProduct=0027 [ 3.784001] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.784003] usb 1-1.1.2: Product: USB Multimedia Keyboard [ 3.784005] usb 1-1.1.2: Manufacturer: Lite-On Technology Corp. [ 3.787750] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input2 [ 3.787802] generic-usb 0003:04CA:0027.0003: input,hidraw2: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:12.2-1.1.2/input0 [ 3.795006] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/input/input3 [ 3.795081] generic-usb 0003:04CA:0027.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:12.2-1.1.2/input1 [ 4.423481] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H663C UO00 PQ: 0 ANSI: 5 [ 4.590192] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.590369] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf807e000, 20:cf:30:1f:37:ac, XID 0c100000 IRQ 16 [ 4.590374] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.595232] sd 0:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB) [ 4.595318] sd 0:0:0:0: [sda] Write Protect is off [ 4.595320] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.595350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.608227] scsi 10:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 [ 4.611598] scsi 10:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 [ 4.614034] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.614070] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 4.614099] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 4.614131] sd 10:0:0:1: Attached scsi generic sg3 type 0 [ 4.654461] firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 4.676927] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 4.684423] sd 10:0:0:1: [sdc] Attached SCSI removable disk [ 4.812705] sda: sda1 sda2 < sda5 > [ 4.813006] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.816360] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.816363] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.816472] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.154270] firewire_core 0000:04:07.0: created device fw0: GUID 001e8c0000dc0c4d, S400 [ 35.046378] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 35.046431] ata3.00: failed command: IDENTIFY PACKET DEVICE [ 35.046481] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [ 35.046482] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 35.046580] ata3.00: status: { DRDY } [ 35.046626] ata3: hard resetting link [ 35.538116] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 36.340115] ata3.00: configured for UDMA/100 [ 37.140487] ata3: EH complete [ 68.116883] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 68.116936] ata3.00: failed command: IDENTIFY PACKET DEVICE [ 68.116985] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [ 68.116986] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 68.117084] ata3.00: status: { DRDY } [ 68.117130] ata3: hard resetting link [ 68.608621] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 69.410086] ata3.00: configured for UDMA/100 [ 70.210473] ata3: EH complete [ 75.265303] PM: Starting manual resume from disk [ 75.265305] PM: Hibernation image partition 8:5 present [ 75.265307] PM: Looking for hibernation image. [ 75.265455] PM: Image not found (code -22) [ 75.265457] PM: Hibernation image not present or could not be loaded. [ 75.269864] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 75.269866] EXT4-fs (sda1): write access will be enabled during recovery [ 75.928482] EXT4-fs (sda1): orphan cleanup on readonly fs [ 75.928487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5242894 [ 75.928522] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5242884 [ 75.928531] EXT4-fs (sda1): 2 orphan inodes deleted [ 75.928532] EXT4-fs (sda1): recovery complete [ 76.031546] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 78.430900] udevd[453]: starting version 175 [ 78.718672] wmi: Mapper loaded [ 79.010260] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120320/utaddress-251) [ 79.010266] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 79.129022] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 79.129027] ACPI: Power Button [PWRB] [ 79.129066] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 79.129069] ACPI: Power Button [PWRF] [ 79.145373] ATK0110 ATK0110:00: EC enabled [ 79.624522] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 79.624589] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 79.624663] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 79.624710] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 79.624754] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 79.624807] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 79.625844] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 79.625889] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 79.627693] hda_intel: Disabling MSI [ 79.653614] [drm] Initialized drm 1.1.0 20060810 [ 79.661854] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 79.661944] sp5100_tco: mmio address 0xb8fe00 already in use [ 80.562348] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 80.562439] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 80.562485] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 80.562531] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17 [ 80.563053] [drm] nouveau 0000:01:00.0: Detected an NVe0 generation card (0x0e4090a2) [ 80.566567] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 80.566573] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 80.566574] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS [ 80.675218] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 80.675220] [drm] nouveau 0000:01:00.0: Using VBIOS from PROM [ 80.675223] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 80.675225] [drm] nouveau 0000:01:00.0: Bios version 80.04.19.00 [ 80.675227] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 80.675396] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 80.675398] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 80.675401] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000f02 00020030 [ 80.675403] [drm] nouveau 0000:01:00.0: DCB outp 01: 02000f00 00000000 [ 80.675405] [drm] nouveau 0000:01:00.0: DCB outp 02: 08011f82 00020030 [ 80.675406] [drm] nouveau 0000:01:00.0: DCB outp 03: 02822f62 0f420010 [ 80.675408] [drm] nouveau 0000:01:00.0: DCB outp 05: 04833fb6 0f420010 [ 80.675409] [drm] nouveau 0000:01:00.0: DCB outp 06: 04033f72 00020010 [ 80.675411] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030 [ 80.675413] [drm] nouveau 0000:01:00.0: DCB conn 01: 00020131 [ 80.675415] [drm] nouveau 0000:01:00.0: DCB conn 02: 00002261 [ 80.675416] [drm] nouveau 0000:01:00.0: DCB conn 03: 00010346 [ 80.675418] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000460 [ 80.675422] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x8227 [ 80.725139] [drm] nouveau 0000:01:00.0: 0x8098: Condition still not met after 20ms, skipping following opcodes [ 80.725163] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x8972 [ 80.727735] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x624F [ 80.727736] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xA654 [ 80.727738] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xA655 [ 80.747581] [drm] nouveau 0000:01:00.0: 0x8157: Condition still not met after 20ms, skipping following opcodes [ 80.747585] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xA758 [ 80.747586] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xA7BD [ 80.749290] [TTM] Zone kernel: Available graphics memory: 433142 kiB [ 80.749291] [TTM] Zone highmem: Available graphics memory: 1812762 kiB [ 80.749292] [TTM] Initializing pool allocator [ 80.749300] [drm] nouveau 0000:01:00.0: Detected 2048MiB VRAM (GDDR5) [ 80.753378] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 80.755313] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 80.755314] [drm] No driver support for vblank timestamp query. [ 80.755376] [drm] nouveau 0000:01:00.0: voltage table 0x50 unknown [ 80.760481] [drm] nouveau 0000:01:00.0: 4 available performance level(s) [ 80.760484] [drm] nouveau 0000:01:00.0: 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV [ 80.760486] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV [ 80.760489] [drm] nouveau 0000:01:00.0: 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV [ 80.760491] [drm] nouveau 0000:01:00.0: 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV [ 80.760493] [drm] nouveau 0000:01:00.0: c: [ 80.869871] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0xe0000, bo f36fd200 [ 80.869924] fbcon: nouveaufb (fb0) is primary device [ 80.934078] Console: switching to colour frame buffer device 240x75 [ 80.940706] fb0: nouveaufb frame buffer device [ 80.940708] drm: registered panic notifier [ 80.940711] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 110.142652] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 110.142691] ata3.00: failed command: IDENTIFY PACKET DEVICE [ 110.142720] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [ 110.142721] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 110.142789] ata3.00: status: { DRDY } [ 110.142810] ata3: hard resetting link [ 110.634434] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 111.436248] ata3.00: configured for UDMA/100 [ 112.236648] ata3: EH complete [ 112.989522] Adding 6367228k swap on /dev/sda5. Priority:-1 extents:1 across:6367228k [ 112.997709] EXT4-fs (sda1): re-mounted. Opts: (null) [ 113.227253] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 113.334660] loop: module loaded [ 114.286579] RPC: Registered named UNIX socket transport module. [ 114.286582] RPC: Registered udp transport module. [ 114.286583] RPC: Registered tcp transport module. [ 114.286585] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 114.325067] FS-Cache: Loaded [ 114.348223] NFS: Registering the id_resolver key type [ 114.348238] FS-Cache: Netfs 'nfs' registered for caching [ 114.369799] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 116.393844] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18 [ 117.492714] Bluetooth: Core ver 2.16 [ 117.492728] NET: Registered protocol family 31 [ 117.492730] Bluetooth: HCI device and connection manager initialized [ 117.492732] Bluetooth: HCI socket layer initialized [ 117.492733] Bluetooth: L2CAP socket layer initialized [ 117.492736] Bluetooth: SCO socket layer initialized [ 117.545170] Bluetooth: RFCOMM TTY layer initialized [ 117.545175] Bluetooth: RFCOMM socket layer initialized [ 117.545177] Bluetooth: RFCOMM ver 1.11 [ 117.860191] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 117.860194] Bluetooth: BNEP filters: protocol multicast [ 117.936335] lp: driver loaded but no devices found [ 118.131149] ppdev: user-space parallel port driver [ 120.608704] r8169 0000:05:00.0: eth0: link down [ 120.608709] r8169 0000:05:00.0: eth0: link down [ 120.608813] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 122.255746] r8169 0000:05:00.0: eth0: link up [ 122.255827] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 132.794655] eth0: no IPv6 routers present