;     file name: spottest.tap
; date and time: Sat Sep 05 2020    15:46:44
; postprocessor: PlasmaC_F.scpost rev: F
;
;begin pre-amble
 G21 (units: metric)
 G40 (cutter compensation: off)
 G90 (distance mode: absolute)
 M52 P1 (adaptive feed: on)
 M65 P2 (enable THC)
 M65 P3 (enable torch)
 M68 E3 Q0 (velocity 100%)
 G64 P0.254 Q0.025 (tracking tolerances: 0.254mm)
 F#<_hal[plasmac.cut-feed-rate]>
;end pre-amble
;
;begin material setup
 M190 P10 (10mm mild steel 45a material)
 M66 P3 L3 Q2 (wait for valid change)
 F#<_hal[plasmac.cut-feed-rate]>
;end material setup
;
;begin spottest #1, spotting
 G0 X20.000 Y20.000
 M3 $2 S1 (spot start)
 G91 (relative distance mode)
 G1 X0.000001 (tiny move)
 G90 (absolute distance mode)
 M5 $2(spot stop)
;end spottest, spotting #1
;
;begin spottest #2, spotting
 G0 X20.000 Y80.000
 M3 $2 S1 (spot start)
 G91 (relative distance mode)
 G1 X0.000001 (tiny move)
 G90 (absolute distance mode)
 M5 $2(spot stop)
;end spottest, spotting #2
;
;begin post-amble
 G40 (cutter compensation: off)
 G90 (distance mode: absolute)
 M65 P2 (enable THC)
 M65 P3 (enable torch)
 M68 E3 Q0 (velocity 100%)
 M5 $-1 (backup stop)
;end post-amble
;
;begin statistics
;  Spots = 2
;end statistics
;
 M30 (end program)