[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable) [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A78LT-M-LE, BIOS 0801 01/17/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 36528000 - 3728c000 [ 0.000000] ACPI: RSDP 000fb470 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT cfe90100 00054 (v01 011711 XSDT1036 20110117 MSFT 00000097) [ 0.000000] ACPI: FACP cfe90290 000F4 (v03 011711 FACP1036 20110117 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579) [ 0.000000] ACPI: DSDT cfe90450 0D41A (v01 A1467 A1467001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS cfea8000 00040 [ 0.000000] ACPI: APIC cfe90390 0007C (v01 011711 APIC1036 20110117 MSFT 00000097) [ 0.000000] ACPI: MCFG cfe90410 0003C (v01 011711 OEMMCFG 20110117 MSFT 00000097) [ 0.000000] ACPI: OEMB cfea8040 00072 (v01 011711 OEMB1036 20110117 MSFT 00000097) [ 0.000000] ACPI: SRAT cfe9f450 000C0 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET cfe9f510 00038 (v01 011711 OEMHPET 20110117 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2438MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cfe90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfe90 [ 0.000000] On node 0 totalpages: 851487 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4b28200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4878 pages used for memmap [ 0.000000] HighMem zone: 619396 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f7785000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844833 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=ccd024cb-3af0-4617-afcd-bc446bdce5cf ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 isolcpus=2,3 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6812672 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe90) [ 0.000000] Memory: 3351812k/3406400k available (3495k kernel code, 54136k reserved, 1237k data, 416k init, 2497096k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:728 16 [ 0.000000] CPU 0 irqstacks, hard=f4006000 soft=f4008000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3214.386 MHz processor. [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.77 BogoMIPS (lpj=12857544) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000036] Security Framework initialized [ 0.000039] AppArmor: AppArmor disabled by boot time parameter [ 0.000052] Mount-cache hash table entries: 512 [ 0.000178] Initializing cgroup subsys cpuacct [ 0.000179] Initializing cgroup subsys memory [ 0.000185] Initializing cgroup subsys devices [ 0.000186] Initializing cgroup subsys freezer [ 0.000187] Initializing cgroup subsys net_cls [ 0.000189] Initializing cgroup subsys blkio [ 0.000193] Initializing cgroup subsys perf_event [ 0.000210] CPU: Physical Processor ID: 0 [ 0.000211] CPU: Processor Core ID: 0 [ 0.000213] mce: CPU supports 6 MCE banks [ 0.000217] LVT offset 0 assigned for vector 0xf9 [ 0.000265] ACPI: Core revision 20120320 [ 0.010355] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.010698] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050314] CPU0: AMD Phenom(tm) II X4 840 Processor stepping 03 [ 0.154891] Performance Events: AMD PMU driver. [ 0.154895] ... version: 0 [ 0.154896] ... bit width: 48 [ 0.154898] ... generic registers: 4 [ 0.154899] ... value mask: 0000ffffffffffff [ 0.154900] ... max period: 00007fffffffffff [ 0.154901] ... fixed-purpose events: 0 [ 0.154903] ... event mask: 000000000000000f [ 0.166911] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.178896] CPU 1 irqstacks, hard=f4094000 soft=f4096000 [ 0.178899] Booting Node 0, Processors #1 [ 0.188840] Initializing CPU#1 [ 0.191927] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.198864] CPU 2 irqstacks, hard=f40c4000 soft=f40c6000 [ 0.198867] #2 [ 0.208807] Initializing CPU#2 [ 0.211901] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.218828] CPU 3 irqstacks, hard=f40d6000 soft=f40d8000 [ 0.218830] #3 [ 0.228771] Initializing CPU#3 [ 0.231872] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.231896] Brought up 4 CPUs [ 0.231898] Total of 4 processors activated (25715.08 BogoMIPS). [ 0.232505] devtmpfs: initialized [ 0.232733] PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes) [ 0.232865] dummy: [ 0.232928] NET: Registered protocol family 16 [ 0.232987] node 0 link 0: io port [1000, ffffff] [ 0.232990] TOM: 00000000d0000000 aka 3328M [ 0.232992] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.232994] node 0 link 0: mmio [a0000, bffff] [ 0.232997] node 0 link 0: mmio [d0000000, dfffffff] [ 0.232999] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.233001] node 0 link 0: mmio [f0000000, ffefffff] [ 0.233003] bus: [00, 07] on node 0 link 0 [ 0.233005] bus: 00 index 0 [io 0x0000-0xffff] [ 0.233007] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.233008] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.233010] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.233062] ACPI: bus type pci registered [ 0.233101] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.233103] PCI: not using MMCONFIG [ 0.233739] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.233741] PCI: Using configuration type 1 for base access [ 0.233742] PCI: Using configuration type 1 for extended access [ 0.234242] bio: create slab at 0 [ 0.234339] ACPI: Added _OSI(Module Device) [ 0.234343] ACPI: Added _OSI(Processor Device) [ 0.234344] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.234346] ACPI: Added _OSI(Processor Aggregator Device) [ 0.235457] ACPI: EC: Look up EC in DSDT [ 0.237586] ACPI: Executed 3 blocks of module-level executable AML code [ 0.275371] ACPI: Interpreter enabled [ 0.275379] ACPI: (supports S0 S3 S4 S5) [ 0.275396] ACPI: Using IOAPIC for interrupt routing [ 0.275416] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.276800] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.276802] PCI: Using MMCONFIG for extended config space [ 0.281214] ACPI: No dock devices found. [ 0.281219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.281290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.281392] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.281394] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.281397] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.281398] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.281400] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] [ 0.281402] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.281427] PCI host bridge to bus 0000:00 [ 0.281429] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.281431] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.281433] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.281435] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.281437] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] [ 0.281438] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.281450] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.281490] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.281515] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.281531] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.281555] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.281585] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.281604] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.281614] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.281623] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.281632] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.281641] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.281651] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff] [ 0.281671] pci 0000:00:11.0: set SATA to AHCI mode [ 0.281704] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.281717] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff] [ 0.281778] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.281791] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff] [ 0.281858] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.281877] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff] [ 0.281945] pci 0000:00:12.2: supports D1 D2 [ 0.281947] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.281968] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.281981] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff] [ 0.282043] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.282056] pci 0000:00:13.1: reg 10: [mem 0xfe8fb000-0xfe8fbfff] [ 0.282122] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.282140] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff] [ 0.282209] pci 0000:00:13.2: supports D1 D2 [ 0.282210] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.282235] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.282325] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.282341] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.282350] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.282359] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.282368] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.282378] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.282426] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.282447] pci 0000:00:14.2: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit] [ 0.282503] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.282517] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.282590] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.282628] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.282641] pci 0000:00:14.5: reg 10: [mem 0xfe8fa000-0xfe8fafff] [ 0.282709] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.282724] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.282737] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.282750] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.282764] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.282811] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000 [ 0.282825] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.282836] pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit] [ 0.282843] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff] [ 0.282856] pci 0000:01:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref] [ 0.282875] pci 0000:01:00.0: supports D1 D2 [ 0.282897] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300 [ 0.282910] pci 0000:01:00.1: reg 10: [mem 0xfe9bc000-0xfe9bffff 64bit] [ 0.282957] pci 0000:01:00.1: supports D1 D2 [ 0.291783] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.291789] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.291792] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.291796] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.291837] pci 0000:02:00.0: [1969:1063] type 00 class 0x020000 [ 0.291859] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit] [ 0.291870] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f] [ 0.291940] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.299770] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.299776] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.299778] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.299815] pci 0000:03:07.0: [2718:5125] type 00 class 0x110000 [ 0.299831] pci 0000:03:07.0: reg 10: [mem 0xfebe0000-0xfebeffff] [ 0.299849] pci 0000:03:07.0: reg 14: [mem 0xfebe0000-0xfebeffff 64bit] [ 0.299949] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.299955] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.299960] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.299961] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.299963] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.299965] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.299967] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.299969] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.299980] pci_bus 0000:00: on NUMA node 0 [ 0.299985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.300201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.300232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.300279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.300337] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.304313] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.304347] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15) [ 0.304378] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.304408] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.304438] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.304469] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.304499] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.304529] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.304614] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.304617] vgaarb: loaded [ 0.304618] vgaarb: bridge control possible 0000:01:00.0 [ 0.304640] PCI: Using ACPI for IRQ routing [ 0.304642] PCI: pci_cache_line_size set to 64 bytes [ 0.304711] pci 0000:03:07.0: address space collision: [mem 0xfebe0000-0xfebeffff 64bit] conflicts with 0000:03:07.0 [mem 0xfebe0000-0xfebeffff] [ 0.304715] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.304717] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff [ 0.304819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.304823] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.306854] Switching to clocksource hpet [ 0.306944] pnp: PnP ACPI init [ 0.306951] ACPI: bus type pnp registered [ 0.307020] pnp 00:00: [bus 00-ff] [ 0.307022] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.307024] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.307025] pnp 00:00: [io 0x0d00-0xffff window] [ 0.307027] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.307029] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.307030] pnp 00:00: [mem 0xcff00000-0xdfffffff window] [ 0.307032] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.307066] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.307131] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.307132] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.307163] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.307198] pnp 00:02: [dma 4] [ 0.307200] pnp 00:02: [io 0x0000-0x000f] [ 0.307201] pnp 00:02: [io 0x0081-0x0083] [ 0.307203] pnp 00:02: [io 0x0087] [ 0.307204] pnp 00:02: [io 0x0089-0x008b] [ 0.307206] pnp 00:02: [io 0x008f] [ 0.307207] pnp 00:02: [io 0x00c0-0x00df] [ 0.307227] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.307235] pnp 00:03: [io 0x0070-0x0071] [ 0.307244] pnp 00:03: [irq 8] [ 0.307263] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.307269] pnp 00:04: [io 0x0061] [ 0.307290] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.307296] pnp 00:05: [io 0x00f0-0x00ff] [ 0.307300] pnp 00:05: [irq 13] [ 0.307320] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.307563] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 0.307584] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.307896] pnp 00:07: [io 0x0060] [ 0.307898] pnp 00:07: [io 0x0064] [ 0.307900] pnp 00:07: [mem 0xfec00000-0xfec00fff] [ 0.307902] pnp 00:07: [mem 0xfee00000-0xfee00fff] [ 0.307939] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.307941] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.307943] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.308066] pnp 00:08: [io 0x0010-0x001f] [ 0.308067] pnp 00:08: [io 0x0022-0x003f] [ 0.308069] pnp 00:08: [io 0x0062-0x0063] [ 0.308070] pnp 00:08: [io 0x0065-0x006f] [ 0.308072] pnp 00:08: [io 0x0072-0x007f] [ 0.308073] pnp 00:08: [io 0x0080] [ 0.308075] pnp 00:08: [io 0x0084-0x0086] [ 0.308076] pnp 00:08: [io 0x0088] [ 0.308078] pnp 00:08: [io 0x008c-0x008e] [ 0.308079] pnp 00:08: [io 0x0090-0x009f] [ 0.308081] pnp 00:08: [io 0x00a2-0x00bf] [ 0.308082] pnp 00:08: [io 0x00b1] [ 0.308083] pnp 00:08: [io 0x00e0-0x00ef] [ 0.308085] pnp 00:08: [io 0x04d0-0x04d1] [ 0.308086] pnp 00:08: [io 0x040b] [ 0.308088] pnp 00:08: [io 0x04d6] [ 0.308089] pnp 00:08: [io 0x0c00-0x0c01] [ 0.308092] pnp 00:08: [io 0x0c14] [ 0.308093] pnp 00:08: [io 0x0c50-0x0c51] [ 0.308094] pnp 00:08: [io 0x0c52] [ 0.308096] pnp 00:08: [io 0x0c6c] [ 0.308097] pnp 00:08: [io 0x0c6f] [ 0.308099] pnp 00:08: [io 0x0cd0-0x0cd1] [ 0.308100] pnp 00:08: [io 0x0cd2-0x0cd3] [ 0.308102] pnp 00:08: [io 0x0cd4-0x0cd5] [ 0.308103] pnp 00:08: [io 0x0cd6-0x0cd7] [ 0.308104] pnp 00:08: [io 0x0cd8-0x0cdf] [ 0.308106] pnp 00:08: [io 0x0b00-0x0b3f] [ 0.308107] pnp 00:08: [io 0x0800-0x089f] [ 0.308109] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.308110] pnp 00:08: [io 0x0b00-0x0b0f] [ 0.308112] pnp 00:08: [io 0x0b20-0x0b3f] [ 0.308113] pnp 00:08: [io 0x0900-0x090f] [ 0.308115] pnp 00:08: [io 0x0910-0x091f] [ 0.308116] pnp 00:08: [io 0xfe00-0xfefe] [ 0.308118] pnp 00:08: [io 0x0060] [ 0.308119] pnp 00:08: [io 0x0064] [ 0.308121] pnp 00:08: [mem 0xcff00000-0xcfffffff] [ 0.308122] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 0.308124] pnp 00:08: [mem 0xfec10000-0xfec1001f] [ 0.308126] pnp 00:08: [mem 0xfed40000-0xfed44fff] [ 0.308188] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.308190] system 00:08: [io 0x040b] has been reserved [ 0.308192] system 00:08: [io 0x04d6] has been reserved [ 0.308194] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.308195] system 00:08: [io 0x0c14] has been reserved [ 0.308197] system 00:08: [io 0x0c50-0x0c51] has been reserved [ 0.308199] system 00:08: [io 0x0c52] has been reserved [ 0.308201] system 00:08: [io 0x0c6c] has been reserved [ 0.308203] system 00:08: [io 0x0c6f] has been reserved [ 0.308205] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.308207] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.308208] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.308210] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.308212] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.308214] system 00:08: [io 0x0b00-0x0b3f] has been reserved [ 0.308216] system 00:08: [io 0x0800-0x089f] has been reserved [ 0.308218] system 00:08: [io 0x0b00-0x0b0f] has been reserved [ 0.308220] system 00:08: [io 0x0b20-0x0b3f] has been reserved [ 0.308222] system 00:08: [io 0x0900-0x090f] has been reserved [ 0.308224] system 00:08: [io 0x0910-0x091f] has been reserved [ 0.308226] system 00:08: [io 0xfe00-0xfefe] has been reserved [ 0.308228] system 00:08: [mem 0xcff00000-0xcfffffff] has been reserved [ 0.308232] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.308234] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.308236] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.308238] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.308346] pnp 00:09: [io 0x0000-0xffffffff disabled] [ 0.308348] pnp 00:09: [io 0x0230-0x023f] [ 0.308350] pnp 00:09: [io 0x0290-0x029f] [ 0.308351] pnp 00:09: [io 0x0300-0x030f] [ 0.308353] pnp 00:09: [io 0x0a30-0x0a3f] [ 0.308387] system 00:09: [io 0x0230-0x023f] has been reserved [ 0.308390] system 00:09: [io 0x0290-0x029f] has been reserved [ 0.308391] system 00:09: [io 0x0300-0x030f] has been reserved [ 0.308393] system 00:09: [io 0x0a30-0x0a3f] has been reserved [ 0.308396] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.308421] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.308456] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.308458] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.309012] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.309016] pnp 00:0b: [mem 0x000c0000-0x000cffff] [ 0.309017] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.309019] pnp 00:0b: [mem 0x00100000-0xcfefffff] [ 0.309021] pnp 00:0b: [mem 0xfec00000-0xffffffff] [ 0.309096] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.309098] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.309100] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.309102] system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved [ 0.309104] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.309108] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.309192] pnp: PnP ACPI: found 12 devices [ 0.309193] ACPI: ACPI bus type pnp unregistered [ 0.309196] PnPBIOS: Disabled by ACPI PNP [ 0.345396] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.345399] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.345402] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.345404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.345408] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.345409] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.345412] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.345418] pci 0000:03:07.0: BAR 1: assigned [mem 0xfeb00000-0xfeb0ffff 64bit] [ 0.345426] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.345430] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.345459] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.345461] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.345462] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.345464] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.345466] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.345468] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.345470] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.345471] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.345473] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.345475] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.345477] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.345479] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.345480] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.345482] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.345484] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.345485] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.345487] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.345489] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.345586] NET: Registered protocol family 2 [ 0.345644] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.345815] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.346210] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.346434] TCP: Hash tables configured (established 131072 bind 65536) [ 0.346436] TCP: reno registered [ 0.346438] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.346446] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.346560] NET: Registered protocol family 1 [ 0.770102] pci 0000:01:00.0: Boot video device [ 0.770113] PCI: CLS mismatch (64 != 16), using 64 bytes [ 0.770151] Unpacking initramfs... [ 0.983196] Freeing initrd memory: 13712k freed [ 0.988214] LVT offset 1 assigned for vector 0x400 [ 0.988227] IBS: LVT offset 1 assigned [ 0.988258] perf: AMD IBS detected (0x0000001f) [ 0.988458] audit: initializing netlink socket (disabled) [ 0.988469] type=2000 audit(1546165024.876:1): initialized [ 0.997221] highmem bounce pool size: 64 pages [ 0.997226] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.997478] VFS: Disk quotas dquot_6.5.2 [ 0.997501] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.997564] msgmni has been set to 1696 [ 0.997769] alg: No test for stdrng (krng) [ 0.997816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.997820] io scheduler noop registered [ 0.997822] io scheduler deadline registered [ 0.997842] io scheduler cfq registered (default) [ 0.997989] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.998001] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.998003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.998253] GHES: HEST is not enabled! [ 0.998261] isapnp: Scanning for PnP cards... [ 1.351559] isapnp: No Plug & Play device found [ 1.351623] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.351999] Linux agpgart interface v0.103 [ 1.352251] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.352626] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.352646] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.352736] mousedev: PS/2 mouse device common for all mice [ 1.352770] rtc_cmos 00:03: RTC can wake from S4 [ 1.352895] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.352919] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.353036] TCP: cubic registered [ 1.353114] NET: Registered protocol family 10 [ 1.353277] Mobile IPv6 [ 1.353279] NET: Registered protocol family 17 [ 1.353282] Registering the dns_resolver key type [ 1.353316] Using IPI No-Shortcut mode [ 1.353426] PM: Hibernation image not present or could not be loaded. [ 1.353436] registered taskstats version 1 [ 1.353786] rtc_cmos 00:03: setting system clock to 2018-12-30 10:17:05 UTC (1546165025) [ 1.353922] Freeing unused kernel memory: 416k freed [ 1.354083] Write protecting the kernel text: 3496k [ 1.354102] Write protecting the kernel read-only data: 984k [ 1.365468] udevd[57]: starting version 175 [ 1.376275] SCSI subsystem initialized [ 1.377593] libata version 3.00 loaded. [ 1.378152] ahci 0000:00:11.0: version 3.0 [ 1.378278] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.378282] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.378830] scsi0 : ahci [ 1.379610] scsi1 : ahci [ 1.379677] scsi2 : ahci [ 1.379723] scsi3 : ahci [ 1.379822] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22 [ 1.379825] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22 [ 1.379828] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22 [ 1.379831] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22 [ 1.387547] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.393287] usbcore: registered new interface driver usbfs [ 1.393310] usbcore: registered new interface driver hub [ 1.397089] scsi4 : pata_atiixp [ 1.400275] scsi5 : pata_atiixp [ 1.400831] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.400833] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.403940] usbcore: registered new device driver usb [ 1.407253] microcode: CPU0: patch_level=0x00000000 [ 1.417299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.417353] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.417377] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.417386] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.417411] ehci_hcd 0000:00:12.2: debug port 1 [ 1.417436] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800 [ 1.428886] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.428917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.428920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.428922] usb usb1: Product: EHCI Host Controller [ 1.428923] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.428925] usb usb1: SerialNumber: 0000:00:12.2 [ 1.429023] hub 1-0:1.0: USB hub found [ 1.429027] hub 1-0:1.0: 6 ports detected [ 1.429136] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.429145] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.429152] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.429173] ehci_hcd 0000:00:13.2: debug port 1 [ 1.429198] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400 [ 1.432154] microcode: CPU0: new patch_level=0x010000c8 [ 1.432167] microcode: CPU1: patch_level=0x00000000 [ 1.434815] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.435596] microcode: CPU1: new patch_level=0x010000c8 [ 1.435622] microcode: CPU2: patch_level=0x00000000 [ 1.438401] microcode: CPU2: new patch_level=0x010000c8 [ 1.438428] microcode: CPU3: patch_level=0x00000000 [ 1.440664] microcode: CPU3: new patch_level=0x010000c8 [ 1.440703] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.441040] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.441081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.441083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.441085] usb usb2: Product: EHCI Host Controller [ 1.441086] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.441088] usb usb2: SerialNumber: 0000:00:13.2 [ 1.441217] hub 2-0:1.0: USB hub found [ 1.441220] hub 2-0:1.0: 6 ports detected [ 1.441337] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.441344] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.441371] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000 [ 1.500763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.500767] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.500769] usb usb3: Product: OHCI Host Controller [ 1.500770] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.500772] usb usb3: SerialNumber: 0000:00:12.0 [ 1.500895] hub 3-0:1.0: USB hub found [ 1.500902] hub 3-0:1.0: 3 ports detected [ 1.500993] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.500999] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.501016] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000 [ 1.501166] atl1c 0000:02:00.0: version 1.0.1.0-NAPI [ 1.572225] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.572229] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.572231] usb usb4: Product: OHCI Host Controller [ 1.572232] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.572234] usb usb4: SerialNumber: 0000:00:12.1 [ 1.583367] hub 4-0:1.0: USB hub found [ 1.583372] hub 4-0:1.0: 3 ports detected [ 1.583465] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.583472] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.583499] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000 [ 1.640523] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.640525] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.640527] usb usb5: Product: OHCI Host Controller [ 1.640529] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.640530] usb usb5: SerialNumber: 0000:00:13.0 [ 1.640642] hub 5-0:1.0: USB hub found [ 1.640648] hub 5-0:1.0: 3 ports detected [ 1.641028] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.641036] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.641211] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000 [ 1.696470] ata2: SATA link down (SStatus 0 SControl 300) [ 1.700413] ata4: SATA link down (SStatus 0 SControl 300) [ 1.700440] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.700443] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.700445] usb usb6: Product: OHCI Host Controller [ 1.700446] usb usb6: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.700448] usb usb6: SerialNumber: 0000:00:13.1 [ 1.700450] ata3: SATA link down (SStatus 0 SControl 300) [ 1.700555] hub 6-0:1.0: USB hub found [ 1.700562] hub 6-0:1.0: 3 ports detected [ 1.700652] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.700659] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.700676] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000 [ 1.740344] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 1.760294] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.760297] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.760299] usb usb7: Product: OHCI Host Controller [ 1.760300] usb usb7: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.760302] usb usb7: SerialNumber: 0000:00:14.5 [ 1.760432] hub 7-0:1.0: USB hub found [ 1.760438] hub 7-0:1.0: 2 ports detected [ 1.868112] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.873856] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.873860] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.873862] usb 1-2: Product: USB2.0 Hub [ 1.874259] hub 1-2:1.0: USB hub found [ 1.874604] hub 1-2:1.0: 4 ports detected [ 1.875372] ata1.00: ATA-8: OCZ-VERTEX2, 1.37, max UDMA/133 [ 1.875375] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.885353] ata1.00: configured for UDMA/133 [ 1.885533] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.37 PQ: 0 ANSI: 5 [ 1.892772] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.892814] sd 0:0:0:0: [sda] Write Protect is off [ 1.892816] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.892830] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.893345] sda: sda1 < sda5 > sda2 sda3 [ 1.893663] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.895417] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.983892] Refined TSC clocksource calibration: 3214.321 MHz. [ 1.983903] Switching to clocksource tsc [ 1.987891] usb 1-3: new high-speed USB device number 3 using ehci_hcd [ 2.226794] usb 1-3: New USB device found, idVendor=046d, idProduct=09a4 [ 2.226797] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.226799] usb 1-3: SerialNumber: 87CD2A40 [ 2.299778] usb 1-2.3: new full-speed USB device number 4 using ehci_hcd [ 2.394593] usb 1-2.3: New USB device found, idVendor=04b3, idProduct=3016 [ 2.394597] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.394599] usb 1-2.3: Product: USB 1.1 2 port downstream low-power hub [ 2.394601] usb 1-2.3: Manufacturer: Lite-On Tech [ 2.394885] hub 1-2.3:1.0: USB hub found [ 2.395219] hub 1-2.3:1.0: 4 ports detected [ 2.467578] usb 1-2.4: new full-speed USB device number 5 using ehci_hcd [ 2.561021] usb 1-2.4: New USB device found, idVendor=0eef, idProduct=0001 [ 2.561024] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.561026] usb 1-2.4: Product: USB TouchController [ 2.561028] usb 1-2.4: Manufacturer: eGalax Inc. [ 2.565209] input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4:1.0/input/input0 [ 2.565290] input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.4/1-2.4:1.0/input/input1 [ 2.565346] generic-usb 0003:0EEF:0001.0001: input,hidraw0: USB HID v2.10 Pointer [eGalax Inc. USB TouchController] on usb-0000:00:12.2-2.4/input0 [ 2.565368] usbcore: registered new interface driver usbhid [ 2.565370] usbhid: USB HID core driver [ 2.666941] usb 1-2.3.3: new low-speed USB device number 6 using ehci_hcd [ 2.769491] usb 1-2.3.3: New USB device found, idVendor=04b3, idProduct=3018 [ 2.769495] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.769497] usb 1-2.3.3: Product: IBM USB Keyboard with UltraNav [ 2.769499] usb 1-2.3.3: Manufacturer: Lite-On Tech [ 2.774275] input: Lite-On Tech IBM USB Keyboard with UltraNav as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/input/input2 [ 2.774341] generic-usb 0003:04B3:3018.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Tech IBM USB Keyboard with UltraNav] on usb-0000:00:12.2-2.3.3/input0 [ 2.780533] input: Lite-On Tech IBM USB Keyboard with UltraNav as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/input/input3 [ 2.780595] generic-usb 0003:04B3:3018.0003: input,hidraw2: USB HID v1.10 Device [Lite-On Tech IBM USB Keyboard with UltraNav] on usb-0000:00:12.2-2.3.3/input1 [ 2.978460] usb 1-2.3.4: new low-speed USB device number 7 using ehci_hcd [ 3.083012] usb 1-2.3.4: New USB device found, idVendor=06cb, idProduct=0009 [ 3.083015] usb 1-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.083018] usb 1-2.3.4: Product: Composite TouchPad / TrackPoint [ 3.083019] usb 1-2.3.4: Manufacturer: Synaptics Inc. [ 6.974470] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 8.163312] udevd[395]: starting version 175 [ 8.234944] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 8.234951] ACPI: Power Button [PWRB] [ 8.234997] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 8.235000] ACPI: Power Button [PWRF] [ 8.244709] wmi: Mapper loaded [ 8.246830] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251) [ 8.246838] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SMRG 2 (20120320/utaddress-251) [ 8.246843] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 3 (20120320/utaddress-251) [ 8.246848] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.251258] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 8.251320] sp5100_tco: mmio address 0xfec000f0 already in use [ 8.266658] [drm] Initialized drm 1.1.0 20060810 [ 8.286710] [drm] radeon kernel modesetting enabled. [ 8.294745] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1462:0x2125). [ 8.294776] [drm] register mmio base: 0xFE9E0000 [ 8.294778] [drm] register mmio size: 131072 [ 8.296040] ATOM BIOS: 113 [ 8.296074] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 8.296077] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 8.299442] [drm] Detected VRAM RAM=1024M, BAR=256M [ 8.299445] [drm] RAM width 64bits DDR [ 8.300718] [TTM] Zone kernel: Available graphics memory: 434422 kiB [ 8.300721] [TTM] Zone highmem: Available graphics memory: 1682970 kiB [ 8.300723] [TTM] Initializing pool allocator [ 8.300745] [drm] radeon: 1024M of VRAM memory ready [ 8.300746] [drm] radeon: 512M of GTT memory ready. [ 8.300762] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 8.301247] [drm] radeon: ib pool ready. [ 8.301324] [drm] Loading CAICOS Microcode [ 8.373277] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 8.373969] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 8.374182] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 8.374266] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 8.374348] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 8.426475] input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0/input/input11 [ 8.428811] Linux media interface: v0.10 [ 8.429380] input: Synaptics Inc. Composite TouchPad / TrackPoint (Stick) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/input/input12 [ 8.429449] usbcore: registered new interface driver synaptics_usb [ 8.430326] Linux video capture interface: v2.00 [ 8.435151] uvcvideo: Found UVC 1.00 device (046d:09a4) [ 8.451191] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input13 [ 8.451332] usbcore: registered new interface driver uvcvideo [ 8.451334] USB Video Class driver (1.1.1) [ 8.471808] usb_audio: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 8.471812] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 5888/8960/1 [ 8.472023] usbcore: registered new interface driver snd-usb-audio [ 9.205246] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 9.205374] radeon 0000:01:00.0: WB enabled [ 9.205377] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xff9f2c00 [ 9.205380] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.205382] [drm] Driver supports precise vblank timestamp query. [ 9.205418] [drm] radeon: irq initialized. [ 9.221603] [drm] ring test on 0 succeeded in 2 usecs [ 9.221765] [drm] ib test on ring 0 succeeded in 0 usecs [ 9.221982] [drm] Radeon Display Connectors [ 9.221984] [drm] Connector 0: [ 9.221985] [drm] HDMI-A [ 9.221986] [drm] HPD2 [ 9.221988] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 9.221990] [drm] Encoders: [ 9.221991] [drm] DFP1: INTERNAL_UNIPHY1 [ 9.221992] [drm] Connector 1: [ 9.221993] [drm] DVI-D [ 9.221994] [drm] HPD4 [ 9.221996] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 9.221997] [drm] Encoders: [ 9.221999] [drm] DFP2: INTERNAL_UNIPHY [ 9.222000] [drm] Connector 2: [ 9.222001] [drm] VGA [ 9.222003] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 9.222005] [drm] Encoders: [ 9.222006] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.222080] [drm] Internal thermal controller with fan control [ 9.222926] [drm] radeon: power management initialized [ 9.258442] [drm] fb mappable at 0xD0142000 [ 9.258444] [drm] vram apper at 0xD0000000 [ 9.258445] [drm] size 5242880 [ 9.258446] [drm] fb depth is 24 [ 9.258447] [drm] pitch is 5120 [ 9.258572] fbcon: radeondrmfb (fb0) is primary device [ 9.488198] Console: switching to colour frame buffer device 160x64 [ 9.492205] fb0: radeondrmfb frame buffer device [ 9.492207] drm: registered panic notifier [ 9.492211] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0 [ 9.508619] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14 [ 9.749318] Adding 1999868k swap on /dev/sda5. Priority:-1 extents:1 across:1999868k SS [ 9.763287] EXT4-fs (sda3): re-mounted. Opts: (null) [ 9.802046] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 9.831137] loop: module loaded [ 9.842659] it87: Found IT8712F chip at 0x290, revision 8 [ 9.842678] it87: Beeping is supported [ 9.842702] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20120320/utaddress-251) [ 9.842707] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SIOE 2 (20120320/utaddress-251) [ 9.842712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.415744] RPC: Registered named UNIX socket transport module. [ 10.415747] RPC: Registered udp transport module. [ 10.415749] RPC: Registered tcp transport module. [ 10.415750] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.421521] FS-Cache: Loaded [ 10.426999] NFS: Registering the id_resolver key type [ 10.427017] FS-Cache: Netfs 'nfs' registered for caching [ 10.431375] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.040139] Bluetooth: Core ver 2.16 [ 11.040159] NET: Registered protocol family 31 [ 11.040161] Bluetooth: HCI device and connection manager initialized [ 11.040163] Bluetooth: HCI socket layer initialized [ 11.040165] Bluetooth: L2CAP socket layer initialized [ 11.040169] Bluetooth: SCO socket layer initialized [ 11.047556] Bluetooth: RFCOMM TTY layer initialized [ 11.047561] Bluetooth: RFCOMM socket layer initialized [ 11.047563] Bluetooth: RFCOMM ver 1.11 [ 11.053661] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.053665] Bluetooth: BNEP filters: protocol multicast [ 11.131233] atl1c 0000:02:00.0: Unable to allocate MSI interrupt Error: -1 [ 11.131322] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 11.165328] lp: driver loaded but no devices found [ 11.171750] ppdev: user-space parallel port driver [ 11.205621] vboxdrv: Found 4 processor cores. [ 11.206696] vboxdrv: fAsync=0 offMin=0x4e6 offMax=0xae25 [ 11.206774] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 11.206776] vboxdrv: Successfully loaded version 4.3.40 (interface 0x001a000b). [ 11.416404] vboxpci: IOMMU not found (not compiled) [ 11.784888] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 12.395827] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7 [ 12.395832] ata1: SError: { HostInt } [ 12.395843] ata1: hard resetting link [ 12.884228] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 12.905351] ata1.00: configured for UDMA/133 [ 12.920147] ata1: EH complete [ 21.316946] eth0: no IPv6 routers present [ 50.457939] I-pipe: head domain RTAI registered. [ 50.457945] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 50.458025] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 50.458027] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 12554965, CLK_FREQ 3214386000, CPU_FREQ 3214386000 [ 50.458030] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 50.458032] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12554965, 12554965, 11561000 [ 50.472218] RTAI[malloc]: global heap size = 2097152 bytes, . [ 50.472280] , , kstacks pool size = 524288 bytes. [ 50.472286] RTAI[sched]: hard timer type/freq = APIC/12554965(Hz); default timing: oneshot; linear timed lists. [ 50.472311] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3214386000 hz. [ 50.472313] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 50.486255] RTAI[math]: loaded. [ 50.555653] hm2: loading Mesa HostMot2 driver version 0.15 [ 50.559104] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 50.721445] hm2: unloading [ 52.796692] RTAI[math]: unloaded. [ 52.798300] SCHED releases registered named ALIEN PEDV$D [ 52.799701] RTAI[malloc]: unloaded. [ 52.895958] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 52.897447] I-pipe: head domain RTAI unregistered. [ 52.897531] RTAI[hal]: unmounted. [ 837.989240] I-pipe: head domain RTAI registered. [ 837.989245] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 837.989322] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 837.989325] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 12554965, CLK_FREQ 3214386000, CPU_FREQ 3214386000 [ 837.989327] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 837.989329] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12554965, 12554965, 10523750 [ 837.996733] RTAI[malloc]: global heap size = 2097152 bytes, . [ 837.996797] , , kstacks pool size = 524288 bytes. [ 837.996800] RTAI[sched]: hard timer type/freq = APIC/12554965(Hz); default timing: oneshot; linear timed lists. [ 837.996802] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3214386000 hz. [ 837.996804] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 838.008169] RTAI[math]: loaded. [ 838.060622] hm2: loading Mesa HostMot2 driver version 0.15 [ 838.062194] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 838.224450] hm2: unloading [ 840.303592] RTAI[math]: unloaded. [ 840.305178] SCHED releases registered named ALIEN PEDV$D [ 840.310126] RTAI[malloc]: unloaded. [ 840.409760] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 840.411288] I-pipe: head domain RTAI unregistered. [ 840.411373] RTAI[hal]: unmounted. [ 1037.218369] I-pipe: head domain RTAI registered. [ 1037.218375] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 1037.218465] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 1037.218467] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 12554965, CLK_FREQ 3214386000, CPU_FREQ 3214386000 [ 1037.218470] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 1037.218472] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12554965, 12554965, 12509000 [ 1037.224444] RTAI[malloc]: global heap size = 2097152 bytes, . [ 1037.224508] , , kstacks pool size = 524288 bytes. [ 1037.224511] RTAI[sched]: hard timer type/freq = APIC/12554965(Hz); default timing: oneshot; linear timed lists. [ 1037.224513] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3214386000 hz. [ 1037.224515] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 1037.234811] RTAI[math]: loaded. [ 1037.286326] hm2: loading Mesa HostMot2 driver version 0.15 [ 1037.288033] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 1037.444886] hm2: unloading [ 1039.522906] RTAI[math]: unloaded. [ 1039.524298] SCHED releases registered named ALIEN PEDV$D [ 1039.530451] RTAI[malloc]: unloaded. [ 1039.629980] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 1039.631507] I-pipe: head domain RTAI unregistered. [ 1039.631590] RTAI[hal]: unmounted. [ 2308.338919] I-pipe: head domain RTAI registered. [ 2308.338925] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2308.339015] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2308.339018] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 12554965, CLK_FREQ 3214386000, CPU_FREQ 3214386000 [ 2308.339021] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2308.339023] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12554965, 12554965, 12498500 [ 2308.345015] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2308.345080] , , kstacks pool size = 524288 bytes. [ 2308.345084] RTAI[sched]: hard timer type/freq = APIC/12554965(Hz); default timing: oneshot; linear timed lists. [ 2308.345086] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3214386000 hz. [ 2308.345088] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2308.351014] RTAI[math]: loaded. [ 2308.500588] hm2: loading Mesa HostMot2 driver version 0.15 [ 2308.502211] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2308.667204] hm2: unloading [ 2310.749942] RTAI[math]: unloaded. [ 2310.751609] SCHED releases registered named ALIEN PEDV$D [ 2310.753361] RTAI[malloc]: unloaded. [ 2310.850271] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2310.851987] I-pipe: head domain RTAI unregistered. [ 2310.852072] RTAI[hal]: unmounted.