[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=f34d77c8-b245-4e93-b841-4f33c1479e65 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000bc63f000 (usable) [ 0.000000] BIOS-e820: 00000000bc63f000 - 00000000bc6bf000 (reserved) [ 0.000000] BIOS-e820: 00000000bc6bf000 - 00000000bc7bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bc7bf000 - 00000000bc7ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bc7ff000 - 00000000bc800000 (usable) [ 0.000000] BIOS-e820: 00000000bc800000 - 00000000bf200000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000100600000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20079 /Base Board Product Name, BIOS 40CN33WW(V2.19) 08/14/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x100600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-EFFFF write-protect [ 0.000000] F0000-FFFFF write-combining [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BC800000 mask FFF800000 uncachable [ 0.000000] 3 base 0BD000000 mask FFF000000 uncachable [ 0.000000] 4 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask FFF800000 write-back [ 0.000000] 7 base 100600000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbc800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: 0000000000000000-00000000bc800000 [ 0.000000] 0000000000 - 00bc800000 page 2M [ 0.000000] kernel direct mapping tables up to bc800000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000100600000 [ 0.000000] 0100000000 - 0100600000 page 2M [ 0.000000] kernel direct mapping tables up to 100600000 @ bc63d000-bc63f000 [ 0.000000] RAMDISK: 36bfa000 - 375f5000 [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bc7fe120 00084 (v01 LENOVO CB-01 00000001 01000013) [ 0.000000] ACPI: FACP 00000000bc7fb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 00000000bc7ee000 0938E (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FACS 00000000bc76e000 00040 [ 0.000000] ACPI: SLIC 00000000bc7fd000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 00000000bc7fc000 000A5 (v32 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 00000000bc7fa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 00000000bc7f9000 0008C (v02 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 00000000bc7f8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT 00000000bc7ed000 00224 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bc7ec000 006FE (v01 INSYDE HR CRB 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 00000000bc7ea000 00028 (v01 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 00000000bc7e7000 00034 (v07 INSYDE HR CRB 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bc7e6000 0090C (v01 INSYDE HR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bc7e5000 00996 (v01 INSYDE HR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000100600000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000100600000 [ 0.000000] NODE_DATA [00000001005fb000 - 00000001005fffff] [ 0.000000] [ffffea0000000000-ffffea00039fffff] PMD -> [ffff8800b9000000-ffff8800bbbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000bc63f [ 0.000000] 0: 0x000bc7ff -> 0x000bc800 [ 0.000000] 0: 0x00100000 -> 0x00100600 [ 0.000000] On node 0 totalpages: 772045 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 141 pages reserved [ 0.000000] DMA zone: 3784 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 752248 pages, LIFO batch:31 [ 0.000000] Normal zone: 21 pages used for memmap [ 0.000000] Normal zone: 1515 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000bc63f000 - 00000000bc6bf000 [ 0.000000] PM: Registered nosave memory: 00000000bc6bf000 - 00000000bc7bf000 [ 0.000000] PM: Registered nosave memory: 00000000bc7bf000 - 00000000bc7ff000 [ 0.000000] PM: Registered nosave memory: 00000000bc800000 - 00000000bf200000 [ 0.000000] PM: Registered nosave memory: 00000000bf200000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bf200000 (gap: bf200000:38e00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880100200000 s82944 r8192 d23552 u262144 [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 757547 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=f34d77c8-b245-4e93-b841-4f33c1479e65 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2956884k/4200448k available (3426k kernel code, 1112268k absent, 131296k reserved, 3312k data, 576k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2095.163 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.32 BogoMIPS (lpj=8380652) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000048] Security Framework initialized [ 0.000052] AppArmor: AppArmor disabled by boot time parameter [ 0.000371] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001484] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001991] Mount-cache hash table entries: 256 [ 0.002108] Initializing cgroup subsys cpuacct [ 0.002113] Initializing cgroup subsys memory [ 0.002124] Initializing cgroup subsys devices [ 0.002127] Initializing cgroup subsys freezer [ 0.002129] Initializing cgroup subsys net_cls [ 0.002131] Initializing cgroup subsys blkio [ 0.002137] Initializing cgroup subsys perf_event [ 0.002167] CPU: Physical Processor ID: 0 [ 0.002168] CPU: Processor Core ID: 0 [ 0.002173] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002174] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002177] mce: CPU supports 7 MCE banks [ 0.002187] CPU0: Thermal monitoring handled by SMI [ 0.002195] using mwait in idle threads. [ 0.002705] ACPI: Core revision 20110623 [ 0.022933] x2apic not enabled, IRQ remapping init failed [ 0.023345] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062969] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07 [ 0.167705] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.167711] PEBS disabled due to CPU errata. [ 0.167713] ... version: 3 [ 0.167715] ... bit width: 48 [ 0.167716] ... generic registers: 4 [ 0.167718] ... value mask: 0000ffffffffffff [ 0.167719] ... max period: 000000007fffffff [ 0.167721] ... fixed-purpose events: 3 [ 0.167722] ... event mask: 000000070000000f [ 0.167898] NMI watchdog enabled, takes one hw-pmu counter. [ 0.168000] Booting Node 0, Processors #1 [ 0.168002] smpboot cpu 1: start_ip = 98000 [ 0.255595] CPU1: Thermal monitoring handled by SMI [ 0.275640] NMI watchdog enabled, takes one hw-pmu counter. [ 0.275750] #2 [ 0.275751] smpboot cpu 2: start_ip = 98000 [ 0.363427] CPU2: Thermal monitoring handled by SMI [ 0.383478] NMI watchdog enabled, takes one hw-pmu counter. [ 0.383579] #3 [ 0.383580] smpboot cpu 3: start_ip = 98000 [ 0.471260] CPU3: Thermal monitoring handled by SMI [ 0.491305] NMI watchdog enabled, takes one hw-pmu counter. [ 0.491333] Brought up 4 CPUs [ 0.491335] Total of 4 processors activated (16761.22 BogoMIPS). [ 0.494966] devtmpfs: initialized [ 0.498049] PM: Registering ACPI NVS region at bc6bf000 (1048576 bytes) [ 0.498232] print_constraints: dummy: [ 0.498292] NET: Registered protocol family 16 [ 0.498381] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.498384] ACPI: bus type pci registered [ 0.498468] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.498471] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.505317] PCI: Using configuration type 1 for base access [ 0.506078] bio: create slab at 0 [ 0.506171] ACPI: Added _OSI(Module Device) [ 0.506173] ACPI: Added _OSI(Processor Device) [ 0.506175] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.506177] ACPI: Added _OSI(Processor Aggregator Device) [ 0.507683] ACPI: EC: Look up EC in DSDT [ 0.509132] ACPI: Executed 1 blocks of module-level executable AML code [ 0.523246] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.524967] ACPI: SSDT 00000000bc670718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.525369] ACPI: Dynamic OEM Table Load: [ 0.525371] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.535565] ACPI: SSDT 00000000bc671a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.536011] ACPI: Dynamic OEM Table Load: [ 0.536013] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.547357] ACPI: SSDT 00000000bc66fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.547743] ACPI: Dynamic OEM Table Load: [ 0.547745] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.564315] ACPI: Interpreter enabled [ 0.564319] ACPI: (supports S0 S3 S4 S5) [ 0.564346] ACPI: Using IOAPIC for interrupt routing [ 0.688618] ACPI: Power Resource [FN00] (off) [ 0.688717] ACPI: Power Resource [FN01] (off) [ 0.689737] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.689965] ACPI: No dock devices found. [ 0.689967] HEST: Table not found. [ 0.689970] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.690429] \_SB_.PCI0:_OSC invalid UUID [ 0.690430] _OSC request data:1 8 0 [ 0.690435] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.691152] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.691155] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.691157] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.691160] pci_root PNP0A08:00: host bridge window [mem 0xbf200000-0xfeafffff] [ 0.691172] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.691213] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 [ 0.691224] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.691231] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.691236] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.691294] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.691319] pci 0000:00:16.0: reg 10: [mem 0xd0604000-0xd060400f 64bit] [ 0.691399] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.691438] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.691726] pci 0000:00:1a.0: reg 10: [mem 0xd060a000-0xd060a3ff] [ 0.693351] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.693381] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.693398] pci 0000:00:1b.0: reg 10: [mem 0xd0600000-0xd0603fff 64bit] [ 0.693471] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.693498] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.693583] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.693612] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.693695] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.693734] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.694014] pci 0000:00:1d.0: reg 10: [mem 0xd0609000-0xd06093ff] [ 0.695645] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.695675] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601 [ 0.695807] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.695827] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 0.695836] pci 0000:00:1f.2: reg 14: [io 0x309c-0x309f] [ 0.695844] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 0.695853] pci 0000:00:1f.2: reg 1c: [io 0x3098-0x309b] [ 0.695862] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 0.695870] pci 0000:00:1f.2: reg 24: [mem 0xd0608000-0xd06087ff] [ 0.695918] pci 0000:00:1f.2: PME# supported from D3hot [ 0.695940] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.695957] pci 0000:00:1f.3: reg 10: [mem 0xd0606000-0xd06060ff 64bit] [ 0.695979] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f] [ 0.696138] pci 0000:01:00.0: [1969:2062] type 0 class 0x000200 [ 0.696229] pci 0000:01:00.0: reg 10: [mem 0xd0500000-0xd053ffff 64bit] [ 0.696266] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f] [ 0.696701] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.703035] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.703045] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.703055] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.703204] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280 [ 0.703252] pci 0000:02:00.0: reg 10: [mem 0xd0400000-0xd040ffff 64bit] [ 0.703483] pci 0000:02:00.0: supports D1 [ 0.703484] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.710996] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.711010] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd04fffff] [ 0.711051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.711325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.711369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.711488] \_SB_.PCI0:_OSC invalid UUID [ 0.711490] _OSC request data:1 1f 0 [ 0.711494] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.711534] \_SB_.PCI0:_OSC invalid UUID [ 0.711536] _OSC request data:1 0 1d [ 0.711539] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.711541] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.714744] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 *4 5 6 10 11 12 14 15) [ 0.714804] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.714860] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.714915] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.714977] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.715034] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.715090] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.715145] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.715245] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.715252] vgaarb: loaded [ 0.715253] vgaarb: bridge control possible 0000:00:02.0 [ 0.715294] PCI: Using ACPI for IRQ routing [ 0.716930] PCI: pci_cache_line_size set to 64 bytes [ 0.717007] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.717010] reserve RAM buffer: 00000000bc63f000 - 00000000bfffffff [ 0.717013] reserve RAM buffer: 00000000bc800000 - 00000000bfffffff [ 0.717015] reserve RAM buffer: 0000000100600000 - 0000000103ffffff [ 0.717126] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.717132] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.719146] Switching to clocksource hpet [ 0.720933] pnp: PnP ACPI init [ 0.720947] ACPI: bus type pnp registered [ 0.721312] pnp 00:00: [bus 00-3e] [ 0.721315] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.721317] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.721319] pnp 00:00: [io 0x0d00-0xffff window] [ 0.721321] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.721323] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.721325] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.721327] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.721329] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.721331] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.721333] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.721335] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.721337] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.721338] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.721340] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.721342] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.721344] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.721346] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.721348] pnp 00:00: [mem 0xbf200000-0xfeafffff window] [ 0.721403] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.721417] pnp 00:01: [io 0x0000-0x001f] [ 0.721419] pnp 00:01: [io 0x0081-0x0091] [ 0.721421] pnp 00:01: [io 0x0093-0x009f] [ 0.721422] pnp 00:01: [io 0x00c0-0x00df] [ 0.721425] pnp 00:01: [dma 4] [ 0.721449] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.721458] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.721481] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.721565] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.721590] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.721601] pnp 00:04: [io 0x00f0] [ 0.721611] pnp 00:04: [irq 13] [ 0.721633] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.721645] pnp 00:05: [io 0x002e-0x002f] [ 0.721647] pnp 00:05: [io 0x004e-0x004f] [ 0.721649] pnp 00:05: [io 0x0061] [ 0.721650] pnp 00:05: [io 0x0063] [ 0.721652] pnp 00:05: [io 0x0065] [ 0.721654] pnp 00:05: [io 0x0067] [ 0.721655] pnp 00:05: [io 0x0068-0x006f] [ 0.721657] pnp 00:05: [io 0x0070] [ 0.721658] pnp 00:05: [io 0x0080] [ 0.721660] pnp 00:05: [io 0x0092] [ 0.721661] pnp 00:05: [io 0x00b2-0x00b3] [ 0.721663] pnp 00:05: [io 0x0680-0x069f] [ 0.721665] pnp 00:05: [io 0x1000-0x100f] [ 0.721666] pnp 00:05: [io 0x1010-0x1013] [ 0.721668] pnp 00:05: [io 0xffff] [ 0.721669] pnp 00:05: [io 0x0400-0x0453] [ 0.721671] pnp 00:05: [io 0x0458-0x047f] [ 0.721673] pnp 00:05: [io 0x0500-0x057f] [ 0.721674] pnp 00:05: [io 0x164e-0x164f] [ 0.721717] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.721720] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.721722] system 00:05: [io 0x1010-0x1013] has been reserved [ 0.721724] system 00:05: [io 0xffff] has been reserved [ 0.721727] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.721730] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.721732] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.721735] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.721738] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.721746] pnp 00:06: [io 0x0070-0x0077] [ 0.721752] pnp 00:06: [irq 8] [ 0.721775] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.721799] pnp 00:07: [io 0x0454-0x0457] [ 0.721834] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.721837] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.779277] pnp 00:08: [irq 12] [ 0.779313] pnp 00:08: Plug and Play ACPI device, IDs SYN0730 SYN0700 SYN0002 PNP0f13 (active) [ 0.779553] pnp 00:09: [io 0x0060] [ 0.779555] pnp 00:09: [io 0x0064] [ 0.779559] pnp 00:09: [irq 1] [ 0.779589] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.779713] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.779716] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 0.779717] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 0.779719] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 0.779721] pnp 00:0a: [mem 0xf8000000-0xfbffffff] [ 0.779723] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 0.779725] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 0.779727] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 0.779729] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 0.779731] pnp 00:0a: [mem 0xbf200000-0xbf200fff] [ 0.779775] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.779777] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.779780] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.779782] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.779785] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.779787] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.779790] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.779793] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.779796] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.779798] system 00:0a: [mem 0xbf200000-0xbf200fff] has been reserved [ 0.779801] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.780051] pnp 00:0b: [mem 0x20000000-0x201fffff] [ 0.780053] pnp 00:0b: [mem 0x40000000-0x401fffff] [ 0.780108] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved [ 0.780111] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved [ 0.780113] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.780134] pnp: PnP ACPI: found 12 devices [ 0.780136] ACPI: ACPI bus type pnp unregistered [ 0.787130] PCI: max bus depth: 1 pci_try_num: 2 [ 0.787154] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.787158] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.787164] pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.787173] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.787179] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd04fffff] [ 0.787204] pci 0000:00:1c.0: setting latency timer to 64 [ 0.787218] pci 0000:00:1c.1: setting latency timer to 64 [ 0.787222] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.787224] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.787226] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.787228] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xfeafffff] [ 0.787230] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.787232] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff] [ 0.787234] pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff] [ 0.787306] NET: Registered protocol family 2 [ 0.787438] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.788250] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.790186] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.790430] TCP: Hash tables configured (established 524288 bind 65536) [ 0.790432] TCP reno registered [ 0.790442] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.790464] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.790596] NET: Registered protocol family 1 [ 0.790610] pci 0000:00:02.0: Boot video device [ 0.819054] PCI: CLS 64 bytes, default 64 [ 0.819150] Unpacking initramfs... [ 1.051249] Freeing initrd memory: 10220k freed [ 1.052561] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.052566] Placing 64MB software IO TLB between ffff8800b5000000 - ffff8800b9000000 [ 1.052568] software IO TLB at phys 0xb5000000 - 0xb9000000 [ 1.052585] Simple Boot Flag at 0x44 set to 0x1 [ 1.053109] audit: initializing netlink socket (disabled) [ 1.053120] type=2000 audit(1389562407.888:1): initialized [ 1.069432] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.069964] VFS: Disk quotas dquot_6.5.2 [ 1.069995] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.070068] msgmni has been set to 5795 [ 1.070236] alg: No test for stdrng (krng) [ 1.070271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.070274] io scheduler noop registered [ 1.070276] io scheduler deadline registered [ 1.070296] io scheduler cfq registered (default) [ 1.070476] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.070497] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.070499] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.070837] intel_idle: MWAIT substates: 0x21120 [ 1.070839] intel_idle: v0.4 model 0x2A [ 1.070840] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.070873] ERST: Table is not found! [ 1.070875] GHES: HEST is not enabled! [ 1.070926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.254733] Linux agpgart interface v0.103 [ 1.254800] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.254877] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.255900] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.256008] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 1.256125] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 1.291583] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.291590] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.291706] mousedev: PS/2 mouse device common for all mice [ 1.291747] rtc_cmos 00:06: RTC can wake from S4 [ 1.294482] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.294512] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.294614] cpuidle: using governor ladder [ 1.294730] cpuidle: using governor menu [ 1.294903] TCP cubic registered [ 1.295006] NET: Registered protocol family 10 [ 1.295514] Mobile IPv6 [ 1.295516] NET: Registered protocol family 17 [ 1.295520] Registering the dns_resolver key type [ 1.295764] PM: Hibernation image not present or could not be loaded. [ 1.295775] registered taskstats version 1 [ 1.296281] rtc_cmos 00:06: setting system clock to 2014-01-12 21:33:28 UTC (1389562408) [ 1.296347] Initializing network drop monitor service [ 1.297393] Freeing unused kernel memory: 576k freed [ 1.297460] Write protecting the kernel read-only data: 6144k [ 1.299810] Freeing unused kernel memory: 652k freed [ 1.302260] Freeing unused kernel memory: 688k freed [ 1.312644] udevd[59]: starting version 175 [ 1.324554] atl1c 0000:01:00.0: setting latency timer to 64 [ 1.330415] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.335519] usbcore: registered new interface driver usbfs [ 1.335550] usbcore: registered new interface driver hub [ 1.342045] SCSI subsystem initialized [ 1.345348] usbcore: registered new device driver usb [ 1.347818] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.347875] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.347880] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.347909] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.347941] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.351838] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.355061] libata version 3.00 loaded. [ 1.355993] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd060a000 [ 1.368274] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.368278] ACPI: Thermal Zone [TZ00] (0 C) [ 1.369253] ACPI: Fan [FAN0] (off) [ 1.369322] ACPI: Fan [FAN1] (off) [ 1.370181] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.370214] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.370219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.370222] usb usb1: Product: EHCI Host Controller [ 1.370225] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd [ 1.370227] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.370359] hub 1-0:1.0: USB hub found [ 1.370363] hub 1-0:1.0: 2 ports detected [ 1.370478] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.370484] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.370498] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.370534] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.374415] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.374435] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd0609000 [ 1.390236] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.390322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.390326] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.390328] usb usb2: Product: EHCI Host Controller [ 1.390330] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd [ 1.390332] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.390482] hub 2-0:1.0: USB hub found [ 1.390487] hub 2-0:1.0: 2 ports detected [ 1.390573] ahci 0000:00:1f.2: version 3.0 [ 1.390672] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 1.390704] ahci: SSS flag set, parallel bus scan disabled [ 1.406264] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.406276] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 1.406296] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.415038] scsi0 : ahci [ 1.415255] scsi1 : ahci [ 1.415378] scsi2 : ahci [ 1.415500] scsi3 : ahci [ 1.415650] scsi4 : ahci [ 1.415798] scsi5 : ahci [ 1.416022] ata1: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608100 irq 40 [ 1.416025] ata2: DUMMY [ 1.416028] ata3: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608200 irq 40 [ 1.416030] ata4: DUMMY [ 1.416031] ata5: DUMMY [ 1.416032] ata6: DUMMY [ 1.451278] atl1c 0000:01:00.0: version 1.0.1.0-NAPI [ 1.681807] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.733742] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.781205] ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133 [ 1.781215] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.782411] ata1.00: configured for UDMA/133 [ 1.782750] scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5 [ 1.814187] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.814197] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.814687] hub 1-1:1.0: USB hub found [ 1.814736] hub 1-1:1.0: 6 ports detected [ 1.925464] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.049258] Refined TSC clocksource calibration: 2095.240 MHz. [ 2.049271] Switching to clocksource tsc [ 2.057962] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.057972] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.058447] hub 2-1:1.0: USB hub found [ 2.058649] hub 2-1:1.0: 6 ports detected [ 2.101185] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.103134] ata3.00: ATAPI: Optiarc DVD RW AD-7710H, A833, max UDMA/100 [ 2.105274] ata3.00: configured for UDMA/100 [ 2.107643] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7710H A833 PQ: 0 ANSI: 5 [ 2.112118] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.112208] sd 0:0:0:0: [sda] Write Protect is off [ 2.112211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.112243] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.114670] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.114679] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.114904] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.129203] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.174670] sda: sda1 sda2 [ 2.175300] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.177102] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.177170] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.221758] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139 [ 2.221768] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.221774] usb 1-1.4: Product: USB2.0-CRW [ 2.221778] usb 1-1.4: Manufacturer: Generic [ 2.221782] usb 1-1.4: SerialNumber: 20100201396000000 [ 2.293093] usb 1-1.6: new full-speed USB device number 4 using ehci_hcd [ 2.388963] usb 1-1.6: New USB device found, idVendor=0489, idProduct=e00d [ 2.388973] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.388979] usb 1-1.6: Product: Broadcom Bluetooth 2.1 Device [ 2.388984] usb 1-1.6: Manufacturer: Broadcom Corp [ 2.388988] usb 1-1.6: SerialNumber: C0F8DAC53BCA [ 2.460844] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd [ 2.563710] usb 2-1.2: New USB device found, idVendor=1c4f, idProduct=0002 [ 2.563720] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.563726] usb 2-1.2: Product: USB Keykoard [ 2.563730] usb 2-1.2: Manufacturer: USB [ 2.580549] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1 [ 2.580629] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input0 [ 2.583072] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input2 [ 2.583122] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input1 [ 2.583135] usbcore: registered new interface driver usbhid [ 2.583137] usbhid: USB HID core driver [ 2.636583] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd [ 2.729552] usb 2-1.4: New USB device found, idVendor=1058, idProduct=07a8 [ 2.729562] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.729567] usb 2-1.4: Product: My Passport 07A8 [ 2.729572] usb 2-1.4: Manufacturer: Western Digital [ 2.729576] usb 2-1.4: SerialNumber: 575833314536335853373435 [ 2.732225] Initializing USB Mass Storage driver... [ 2.732322] scsi6 : usb-storage 2-1.4:1.0 [ 2.732394] usbcore: registered new interface driver usb-storage [ 2.732396] USB Mass Storage support registered. [ 2.800340] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd [ 2.908047] usb 2-1.6: New USB device found, idVendor=5986, idProduct=0292 [ 2.908057] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.908063] usb 2-1.6: Product: Lenovo EasyCamera [ 2.908068] usb 2-1.6: Manufacturer: Bison Corp. [ 3.731792] scsi 6:0:0:0: Direct-Access WD My Passport 07A8 1042 PQ: 0 ANSI: 6 [ 3.732400] scsi 6:0:0:1: Enclosure WD SES Device 1042 PQ: 0 ANSI: 6 [ 3.733409] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.733831] scsi 6:0:0:1: Attached scsi generic sg3 type 13 [ 3.733872] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.734623] sd 6:0:0:0: [sdb] Write Protect is off [ 3.734628] sd 6:0:0:0: [sdb] Mode Sense: 53 00 10 08 [ 3.735782] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.735854] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.738121] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.738188] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.819683] sdb: sdb1 sdb2 < sdb5 > sdb3 [ 3.823049] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.823097] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.823141] sd 6:0:0:0: [sdb] Attached SCSI disk [ 3.888455] ses 6:0:0:1: Attached Enclosure device [ 4.333150] PM: Starting manual resume from disk [ 4.333154] PM: Hibernation image partition 8:21 present [ 4.333156] PM: Looking for hibernation image. [ 4.350395] PM: Image not found (code -22) [ 4.350400] PM: Hibernation image not present or could not be loaded. [ 4.411248] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 6.312925] udevd[416]: starting version 175 [ 6.649826] ACPI: AC Adapter [ACAD] (off-line) [ 6.650972] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3 [ 6.650978] ACPI: Power Button [PWRB] [ 6.651025] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4 [ 6.651028] ACPI: Sleep Button [SLPB] [ 6.651089] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 [ 6.651215] ACPI: Lid Switch [LID0] [ 6.651261] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 6.651264] ACPI: Power Button [PWRF] [ 6.653764] ACPI: Requesting acpi_cpufreq [ 6.945664] iTCO_vendor_support: vendor-support=0 [ 6.966810] ACPI: Battery Slot [BAT1] (battery present) [ 6.980106] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 6.980216] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 6.980296] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.012478] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 7.174906] ACPI: resource 0000:00:1f.3 [io 0x3040-0x305f] conflicts with ACPI region SMBI [io 0x3040-0x304f] [ 7.174910] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.242816] [drm] Initialized drm 1.1.0 20060810 [ 7.334350] i915 0000:00:02.0: setting latency timer to 64 [ 7.368994] Bluetooth: Core ver 2.16 [ 7.369013] NET: Registered protocol family 31 [ 7.369016] Bluetooth: HCI device and connection manager initialized [ 7.369019] Bluetooth: HCI socket layer initialized [ 7.369022] Bluetooth: L2CAP socket layer initialized [ 7.369029] Bluetooth: SCO socket layer initialized [ 7.372677] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 7.372683] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.372685] [drm] Driver supports precise vblank timestamp query. [ 7.372723] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.384332] Linux media interface: v0.10 [ 7.497107] cfg80211: Calling CRDA to update world regulatory domain [ 7.505690] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 7.505891] usbcore: registered new interface driver btusb [ 7.519274] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8 [ 7.661948] rts5139: module is from the staging directory, the quality is unknown, you have been warned. [ 7.663442] Initializing rts5139 USB card reader driver... [ 7.666906] scsi7 : SCSI emulation for RTS5139 USB card reader [ 7.667246] usbcore: registered new interface driver rts5139 [ 7.667252] Realtek rts5139 USB card reader support registered. [ 7.667455] scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 7.669730] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 7.670616] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 7.694764] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 7.890701] fbcon: inteldrmfb (fb0) is primary device [ 7.951910] Linux video capture interface: v2.00 [ 7.997802] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0292) [ 8.000208] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9 [ 8.000345] usbcore: registered new interface driver uvcvideo [ 8.000347] USB Video Class driver (1.1.1) [ 8.098922] Console: switching to colour frame buffer device 170x48 [ 8.106146] fb0: inteldrmfb frame buffer device [ 8.106151] drm: registered panic notifier [ 8.148267] acpi device:34: registered as cooling_device6 [ 8.148734] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 8.148883] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.148901] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.149028] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 8.149067] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 8.480382] ath9k 0000:02:00.0: setting latency timer to 64 [ 8.533168] ath: EEPROM regdomain: 0x65 [ 8.533170] ath: EEPROM indicates we should expect a direct regpair map [ 8.533173] ath: Country alpha2 being used: 00 [ 8.533175] ath: Regpair used: 0x65 [ 8.616704] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 8.736430] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 8.803624] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.804520] Registered led device: ath9k-phy0 [ 8.804534] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900051a0000, irq=17 [ 8.924247] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 [ 8.940244] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.940514] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.464191] cfg80211: World regulatory domain updated: [ 9.464196] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.464199] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.464202] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.464204] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.464206] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.464209] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.067985] Adding 3086332k swap on /dev/sdb5. Priority:-1 extents:1 across:3086332k [ 11.097395] EXT4-fs (sdb3): re-mounted. Opts: (null) [ 11.322199] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro [ 11.416914] loop: module loaded [ 13.094162] RPC: Registered named UNIX socket transport module. [ 13.094166] RPC: Registered udp transport module. [ 13.094169] RPC: Registered tcp transport module. [ 13.094171] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.139176] FS-Cache: Loaded [ 13.186115] FS-Cache: Netfs 'nfs' registered for caching [ 13.203815] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.667574] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14 [ 16.979998] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.980004] Bluetooth: BNEP filters: protocol multicast [ 17.041369] Bluetooth: RFCOMM TTY layer initialized [ 17.041374] Bluetooth: RFCOMM socket layer initialized [ 17.041376] Bluetooth: RFCOMM ver 1.11 [ 17.962987] lp: driver loaded but no devices found [ 17.983391] ppdev: user-space parallel port driver [ 19.735932] atl1c 0000:01:00.0: irq 43 for MSI/MSI-X [ 19.823672] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.870294] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.019991] wlan0: authenticate with 00:1c:f0:e2:4a:b6 (try 1) [ 22.021775] wlan0: authenticated [ 22.056193] wlan0: associate with 00:1c:f0:e2:4a:b6 (try 1) [ 22.138368] wlan0: RX AssocResp from 00:1c:f0:e2:4a:b6 (capab=0x471 status=0 aid=2) [ 22.138377] wlan0: associated [ 22.139800] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 33.118938] wlan0: no IPv6 routers present [ 261.798581] usb 2-1.1: new high-speed USB device number 6 using ehci_hcd [ 261.892825] usb 2-1.1: New USB device found, idVendor=048d, idProduct=1170 [ 261.892836] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 261.892842] usb 2-1.1: Product: USB Mass Storage Device [ 261.892847] usb 2-1.1: Manufacturer: iTE Tech [ 261.892851] usb 2-1.1: SerialNumber: 000000006B2901E2 [ 261.893747] scsi8 : usb-storage 2-1.1:1.0 [ 262.890079] scsi 8:0:0:0: Direct-Access SRT Pollex USB 0.00 PQ: 0 ANSI: 4 [ 262.891437] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 262.892458] sd 8:0:0:0: [sdd] 31711702 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 262.893324] sd 8:0:0:0: [sdd] Write Protect is off [ 262.893334] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 262.894193] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 262.902150] sdd: sdd1 [ 262.905266] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 263.202236] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!