[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004ff50000 (usable) [ 0.000000] BIOS-e820: 000000004ff50000 - 000000004ff65000 (ACPI data) [ 0.000000] BIOS-e820: 000000004ff65000 - 000000004ff66000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004ff66000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x4ff50 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000004ff50000 (usable) [ 0.000000] modified: 000000004ff50000 - 000000004ff65000 (ACPI data) [ 0.000000] modified: 000000004ff65000 - 000000004ff66000 (ACPI NVS) [ 0.000000] modified: 000000004ff66000 - 0000000060000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37364000 - 37fefe50 [ 0.000000] Allocated new RAMDISK: 008b5000 - 01540e50 [ 0.000000] Move RAMDISK from 0000000037364000 - 0000000037fefe4f to 008b5000 - 01540e4f [ 0.000000] ACPI: RSDP 000f7ca0 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 4ff5e351 0005C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) [ 0.000000] ACPI: SLIC 4ff64ace 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) [ 0.000000] ACPI: FACP 4ff64c44 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 4ff5e3ad 066AD (v01 NVIDIA MCP67 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 4ff65fc0 00040 [ 0.000000] ACPI: SSDT 4ff64d38 001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 4ff64efc 0003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000) [ 0.000000] ACPI: HPET 4ff64f38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 4ff64f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 4ff64fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 391MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b40ed] BRK ==> [00008b1000 - 00008b40ed] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008b5000 - 0001540e50] NEW RAMDISK ==> [00008b5000 - 0001540e50] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f7c90] f7c90 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0004ff50 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0004ff50 [ 0.000000] On node 0 totalpages: 327402 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1542000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 783 pages used for memmap [ 0.000000] HighMem zone: 99395 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c2000000 s74936 r0 d23368 u2097152 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 324843 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=ee4e58f4-38f6-4693-9776-09bcf4038e4c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6550080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0004ff50) [ 0.000000] Memory: 1270256k/1310016k available (4539k kernel code, 38404k reserved, 1928k data, 620k init, 400712k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1700.023 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3400.04 BogoMIPS (lpj=6800092) [ 0.004027] Security Framework initialized [ 0.004052] AppArmor: AppArmor initialized [ 0.004061] Mount-cache hash table entries: 512 [ 0.004209] Initializing cgroup subsys ns [ 0.004214] Initializing cgroup subsys cpuacct [ 0.004219] Initializing cgroup subsys memory [ 0.004228] Initializing cgroup subsys devices [ 0.004231] Initializing cgroup subsys freezer [ 0.004235] Initializing cgroup subsys net_cls [ 0.004255] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004259] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004262] CPU: Physical Processor ID: 0 [ 0.004264] CPU: Processor Core ID: 0 [ 0.004268] mce: CPU supports 5 MCE banks [ 0.004282] using C1E aware idle routine [ 0.004291] Performance Events: AMD PMU driver. [ 0.004299] ... version: 0 [ 0.004301] ... bit width: 48 [ 0.004304] ... generic registers: 4 [ 0.004307] ... value mask: 0000ffffffffffff [ 0.004309] ... max period: 00007fffffffffff [ 0.004312] ... fixed-purpose events: 0 [ 0.004314] ... event mask: 000000000000000f [ 0.004319] Checking 'hlt' instruction... OK. [ 0.020795] ACPI: Core revision 20090903 [ 0.036011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036019] ftrace: allocating 21003 entries in 42 pages [ 0.044955] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.045438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.048001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.048001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.048001] ..... (found apic 0 pin 2) ... [ 0.088840] ....... works. [ 0.088842] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 256K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.176042] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 [ 0.176074] Brought up 2 CPUs [ 0.176077] Total of 2 processors activated (6800.73 BogoMIPS). [ 0.176072] System has AMD C1E enabled [ 0.176072] Switch to broadcast mode on CPU1 [ 0.176274] CPU0 attaching sched-domain: [ 0.176278] domain 0: span 0-1 level MC [ 0.176281] groups: 0 1 [ 0.176288] CPU1 attaching sched-domain: [ 0.176291] domain 0: span 0-1 level MC [ 0.176295] groups: 1 0 [ 0.176400] Switch to broadcast mode on CPU0 [ 0.176400] devtmpfs: initialized [ 0.176400] regulator: core version 0.5 [ 0.176400] NET: Registered protocol family 16 [ 0.176400] Trying to unpack rootfs image as initramfs... [ 0.176400] EISA bus registered [ 0.176400] ACPI: bus type pci registered [ 0.176400] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.176400] PCI: MCFG area at e0000000 reserved in E820 [ 0.176400] PCI: Using MMCONFIG for extended config space [ 0.176400] PCI: Using configuration type 1 for base access [ 0.180147] bio: create slab at 0 [ 0.181232] ACPI: EC: Look up EC in DSDT [ 0.186652] ACPI: Interpreter enabled [ 0.186655] ACPI: (supports S0 S5) [ 0.186668] ACPI: Using IOAPIC for interrupt routing [ 0.248001] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.248001] ACPI: No dock devices found. [ 0.248001] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.248001] pci 0000:00:01.0: reg 10 io port: [0x1d00-0x1dff] [ 0.248001] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf] [ 0.248001] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f] [ 0.248001] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f] [ 0.248001] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.248001] pci 0000:00:01.1: PME# disabled [ 0.248001] pci 0000:00:01.3: reg 10 32bit mmio: [0xd0600000-0xd067ffff] [ 0.248001] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0886000-0xd0886fff] [ 0.248001] pci 0000:00:02.0: supports D1 D2 [ 0.248001] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:00:02.0: PME# disabled [ 0.248001] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0889000-0xd08890ff] [ 0.248001] pci 0000:00:02.1: supports D1 D2 [ 0.248001] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:00:02.1: PME# disabled [ 0.248001] pci 0000:00:04.0: reg 10 32bit mmio: [0xd0887000-0xd0887fff] [ 0.248001] pci 0000:00:04.0: supports D1 D2 [ 0.248001] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:00:04.0: PME# disabled [ 0.248001] pci 0000:00:04.1: reg 10 32bit mmio: [0xd0889400-0xd08894ff] [ 0.248001] pci 0000:00:04.1: supports D1 D2 [ 0.248001] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:00:04.1: PME# disabled [ 0.248001] pci 0000:00:07.0: reg 10 32bit mmio: [0xd0880000-0xd0883fff] [ 0.248001] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.248001] pci 0000:00:07.0: PME# disabled [ 0.248001] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7] [ 0.248001] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7] [ 0.248001] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef] [ 0.248001] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3] [ 0.248001] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df] [ 0.248001] pci 0000:00:09.0: reg 24 32bit mmio: [0xd0884000-0xd0885fff] [ 0.248001] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0888000-0xd0888fff] [ 0.248001] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff] [ 0.248001] pci 0000:00:0a.0: reg 18 32bit mmio: [0xd0889c00-0xd0889cff] [ 0.248001] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xd0889800-0xd088980f] [ 0.248001] pci 0000:00:0a.0: supports D1 D2 [ 0.248001] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:00:0a.0: PME# disabled [ 0.248001] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:00:0c.0: PME# disabled [ 0.248001] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:00:0d.0: PME# disabled [ 0.248001] pci 0000:00:12.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] [ 0.248001] pci 0000:00:12.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.248001] pci 0000:00:12.0: reg 1c 64bit mmio: [0xd1000000-0xd1ffffff] [ 0.248001] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.248001] pci 0000:01:04.0: reg 10 32bit mmio: [0xd0500000-0xd05007ff] [ 0.248001] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 0.248001] pci 0000:01:04.0: PME# disabled [ 0.248001] pci 0000:01:04.1: reg 10 32bit mmio: [0xd0500800-0xd05008ff] [ 0.248001] pci 0000:01:04.1: supports D1 D2 [ 0.248001] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:01:04.1: PME# disabled [ 0.248001] pci 0000:01:04.2: reg 10 32bit mmio: [0xd0500c00-0xd0500cff] [ 0.248001] pci 0000:01:04.2: supports D1 D2 [ 0.248001] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:01:04.2: PME# disabled [ 0.248001] pci 0000:01:04.3: reg 10 32bit mmio: [0xd0501000-0xd05010ff] [ 0.248001] pci 0000:01:04.3: supports D1 D2 [ 0.248001] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:01:04.3: PME# disabled [ 0.248001] pci 0000:01:04.4: reg 10 32bit mmio: [0xd0501400-0xd05014ff] [ 0.248001] pci 0000:01:04.4: supports D1 D2 [ 0.248001] pci 0000:01:04.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248001] pci 0000:01:04.4: PME# disabled [ 0.248001] pci 0000:00:08.0: transparent bridge [ 0.248001] pci 0000:00:08.0: bridge 32bit mmio: [0xd0500000-0xd05fffff] [ 0.248001] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff] [ 0.248001] pci 0000:00:0c.0: bridge 32bit mmio: [0xd0200000-0xd03fffff] [ 0.248001] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.248001] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0400000-0xd040ffff] [ 0.248001] pci 0000:00:0d.0: bridge 32bit mmio: [0xd0400000-0xd04fffff] [ 0.248001] pci_bus 0000:00: on NUMA node 0 [ 0.248001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.248001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.248001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.248001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.248001] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10 [ 0.248001] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11) [ 0.248001] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled. [ 0.248001] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled. [ 0.248001] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.248001] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.248001] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.248001] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.248001] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.248001] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11 [ 0.248001] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7 [ 0.248001] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.248001] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.248001] ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *10 [ 0.248001] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 0.248001] ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5 [ 0.248001] ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10 [ 0.248001] ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11 [ 0.248001] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 [ 0.248001] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none [ 0.248001] vgaarb: loaded [ 0.248001] SCSI subsystem initialized [ 0.292001] libata version 3.00 loaded. [ 0.292001] usbcore: registered new interface driver usbfs [ 0.292001] usbcore: registered new interface driver hub [ 0.292001] usbcore: registered new device driver usb [ 0.292001] ACPI: WMI: Mapper loaded [ 0.292001] PCI: Using ACPI for IRQ routing [ 0.292001] NetLabel: Initializing [ 0.292001] NetLabel: domain hash size = 128 [ 0.292001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.292001] NetLabel: unlabeled traffic allowed by default [ 0.292001] AppArmor: AppArmor Filesystem Enabled [ 0.292001] pnp: PnP ACPI init [ 0.292001] ACPI: bus type pnp registered [ 0.326284] pnp: PnP ACPI: found 13 devices [ 0.326288] ACPI: ACPI bus type pnp unregistered [ 0.326292] PnPBIOS: Disabled by ACPI PNP [ 0.326306] system 00:01: ioport range 0x360-0x361 has been reserved [ 0.326311] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.326320] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved [ 0.326328] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 0.326332] system 00:0a: ioport range 0x1080-0x10ff has been reserved [ 0.326336] system 00:0a: ioport range 0x1400-0x147f has been reserved [ 0.326340] system 00:0a: ioport range 0x1480-0x14ff has been reserved [ 0.326344] system 00:0a: ioport range 0x1800-0x187f has been reserved [ 0.326348] system 00:0a: ioport range 0x1880-0x18ff has been reserved [ 0.326355] system 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.326360] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.326364] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.326368] system 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.326372] system 00:0c: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.328001] Switching to clocksource acpi_pm [ 0.365367] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.365367] pci 0000:00:08.0: IO window: disabled [ 0.365367] pci 0000:00:08.0: MEM window: 0xd0500000-0xd05fffff [ 0.365367] pci 0000:00:08.0: PREFETCH window: disabled [ 0.365367] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.365367] pci 0000:00:0c.0: IO window: 0x4000-0x4fff [ 0.365367] pci 0000:00:0c.0: MEM window: 0xd0200000-0xd03fffff [ 0.365367] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.365367] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 0.365367] pci 0000:00:0d.0: IO window: disabled [ 0.365367] pci 0000:00:0d.0: MEM window: 0xd0400000-0xd04fffff [ 0.365367] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.365367] pci 0000:00:08.0: setting latency timer to 64 [ 0.365367] pci 0000:00:0c.0: setting latency timer to 64 [ 0.365367] pci 0000:00:0d.0: setting latency timer to 64 [ 0.365367] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.365367] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.365367] pci_bus 0000:01: resource 1 mem: [0xd0500000-0xd05fffff] [ 0.365367] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.365367] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.365367] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.365367] pci_bus 0000:03: resource 1 mem: [0xd0200000-0xd03fffff] [ 0.365367] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.365367] pci_bus 0000:05: resource 1 mem: [0xd0400000-0xd04fffff] [ 0.365367] NET: Registered protocol family 2 [ 0.365367] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.365367] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.365840] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.366382] TCP: Hash tables configured (established 131072 bind 65536) [ 0.366386] TCP reno registered [ 0.366498] NET: Registered protocol family 1 [ 0.366716] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.366771] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.366833] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.366901] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.366973] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.367052] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.367059] pci 0000:00:12.0: Boot video device [ 0.367108] Simple Boot Flag at 0x36 set to 0x1 [ 0.367359] Scanning for low memory corruption every 60 seconds [ 0.367490] audit: initializing netlink socket (disabled) [ 0.367503] type=2000 audit(1390423304.366:1): initialized [ 0.377841] highmem bounce pool size: 64 pages [ 0.377848] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.379811] VFS: Disk quotas dquot_6.5.2 [ 0.379883] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.380616] fuse init (API version 7.13) [ 0.380729] msgmni has been set to 1700 [ 0.381048] alg: No test for stdrng (krng) [ 0.381130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.381135] io scheduler noop registered [ 0.381137] io scheduler anticipatory registered [ 0.381140] io scheduler deadline registered [ 0.381192] io scheduler cfq registered (default) [ 0.381367] alloc irq_desc for 24 on node -1 [ 0.381371] alloc kstat_irqs on node -1 [ 0.381382] pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.381389] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.381477] alloc irq_desc for 25 on node -1 [ 0.381480] alloc kstat_irqs on node -1 [ 0.381486] pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X [ 0.381492] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.381561] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.381592] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.381683] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.391187] ACPI: Lid Switch [LID] [ 0.391251] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.391255] ACPI: Sleep Button [SLPB] [ 0.391351] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.391355] ACPI: Power Button [PWRB] [ 0.391408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.391412] ACPI: Power Button [PWRF] [ 0.393249] hpet_acpi_add: no address or irqs in _CRS [ 0.393324] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.394930] brd: module loaded [ 0.395517] loop: module loaded [ 0.395643] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.396288] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 0.396294] alloc irq_desc for 23 on node -1 [ 0.396296] alloc kstat_irqs on node -1 [ 0.396309] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 0.396356] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 0.396370] pata_acpi 0000:00:09.0: PCI INT A disabled [ 0.396765] Fixed MDIO Bus: probed [ 0.396812] PPP generic driver version 2.4.2 [ 0.396880] tun: Universal TUN/TAP device driver, 1.6 [ 0.396883] tun: (C) 1999-2004 Max Krasnyansky [ 0.396992] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.397450] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 0.397454] alloc irq_desc for 22 on node -1 [ 0.397457] alloc kstat_irqs on node -1 [ 0.397467] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 0.397489] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.397493] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.397549] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.397577] ehci_hcd 0000:00:02.1: debug port 1 [ 0.397587] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.397615] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0889000 [ 0.397670] isapnp: Scanning for PnP cards... [ 0.446543] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.446673] usb usb1: configuration #1 chosen from 1 choice [ 0.446713] hub 1-0:1.0: USB hub found [ 0.446724] hub 1-0:1.0: 5 ports detected [ 0.447218] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 21 [ 0.447223] alloc irq_desc for 21 on node -1 [ 0.447226] alloc kstat_irqs on node -1 [ 0.447237] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 21 (level, low) -> IRQ 21 [ 0.447258] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.447262] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.447315] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.447341] ehci_hcd 0000:00:04.1: debug port 1 [ 0.447350] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.447373] ehci_hcd 0000:00:04.1: irq 21, io mem 0xd0889400 [ 0.490803] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.490929] usb usb2: configuration #1 chosen from 1 choice [ 0.490971] hub 2-0:1.0: USB hub found [ 0.490982] hub 2-0:1.0: 5 ports detected [ 0.491050] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.491467] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 [ 0.491471] alloc irq_desc for 20 on node -1 [ 0.491474] alloc kstat_irqs on node -1 [ 0.491485] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20 [ 0.491503] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.491507] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.491580] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.491613] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd0886000 [ 0.580557] usb usb3: configuration #1 chosen from 1 choice [ 0.580591] hub 3-0:1.0: USB hub found [ 0.580603] hub 3-0:1.0: 5 ports detected [ 0.581085] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 23 [ 0.581090] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 23 (level, low) -> IRQ 23 [ 0.581105] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.581109] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.581159] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.581191] ohci_hcd 0000:00:04.0: irq 23, io mem 0xd0887000 [ 0.589917] Freeing initrd memory: 12847k freed [ 0.639124] usb usb4: configuration #1 chosen from 1 choice [ 0.639159] hub 4-0:1.0: USB hub found [ 0.639171] hub 4-0:1.0: 5 ports detected [ 0.639235] uhci_hcd: USB Universal Host Controller Interface driver [ 0.639342] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 0.669258] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.669267] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.669433] mice: PS/2 mouse device common for all mice [ 0.672546] rtc_cmos 00:04: RTC can wake from S4 [ 0.672597] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.672638] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.672774] device-mapper: uevent: version 1.0.3 [ 0.672926] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.673045] device-mapper: multipath: version 1.1.0 loaded [ 0.673049] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.673202] EISA: Probing bus 0 at eisa.0 [ 0.673208] Cannot allocate resource for EISA slot 1 [ 0.673214] Cannot allocate resource for EISA slot 3 [ 0.673218] Cannot allocate resource for EISA slot 4 [ 0.673231] EISA: Detected 0 cards. [ 0.673234] cpuidle: using governor ladder [ 0.673237] cpuidle: using governor menu [ 0.673742] TCP cubic registered [ 0.673933] NET: Registered protocol family 10 [ 0.674449] lo: Disabled Privacy Extensions [ 0.674826] NET: Registered protocol family 17 [ 0.674865] Using IPI No-Shortcut mode [ 0.674984] registered taskstats version 1 [ 0.675442] rtc_cmos 00:04: setting system clock to 2014-01-22 20:41:45 UTC (1390423305) [ 0.675446] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.675449] EDD information not available. [ 0.695104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.754975] isapnp: No Plug & Play device found [ 0.755007] Freeing unused kernel memory: 620k freed [ 0.755590] Write protecting the kernel text: 4540k [ 0.755630] Write protecting the kernel read-only data: 1668k [ 0.785404] udev: starting version 151 [ 0.934537] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.935049] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 0.935056] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 0.935063] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.960981] vga16fb: initializing [ 0.960988] vga16fb: mapped to 0xc00a0000 [ 0.961067] fb0: VGA16 VGA frame buffer device [ 0.984149] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 0.984441] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 0.984508] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 0.988670] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 0.988693] ohci1394 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 1.045343] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[d0500000-d05007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.056054] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 1.201885] Console: switching to colour frame buffer device 80x30 [ 1.248517] usb 3-2: config 1 has an invalid interface number: 1 but max is 0 [ 1.248523] usb 3-2: config 1 has no interface number 0 [ 1.255627] usb 3-2: configuration #1 chosen from 1 choice [ 1.272236] usbcore: registered new interface driver hiddev [ 1.279921] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input7 [ 1.280084] generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-2/input1 [ 1.280129] usbcore: registered new interface driver usbhid [ 1.280133] usbhid: v2.6:USB HID core driver [ 1.453386] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:16:d4:e0:57:d3 [ 1.453393] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 1.453594] ahci 0000:00:09.0: version 3.0 [ 1.453614] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 1.453683] alloc irq_desc for 26 on node -1 [ 1.453686] alloc kstat_irqs on node -1 [ 1.453698] ahci 0000:00:09.0: irq 26 for MSI/MSI-X [ 1.453706] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 1.453785] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.453791] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part [ 1.453796] ahci 0000:00:09.0: setting latency timer to 64 [ 1.454372] scsi0 : ahci [ 1.454590] scsi1 : ahci [ 1.454692] scsi2 : ahci [ 1.454790] scsi3 : ahci [ 1.454979] ata1: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884100 irq 26 [ 1.454983] ata2: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884180 irq 26 [ 1.454987] ata3: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884200 irq 26 [ 1.454991] ata4: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884280 irq 26 [ 1.772067] ata4: SATA link down (SStatus 0 SControl 300) [ 1.772080] ata3: SATA link down (SStatus 0 SControl 300) [ 1.772094] ata2: SATA link down (SStatus 0 SControl 300) [ 2.160054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.160951] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100 [ 2.160956] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.162082] ata1.00: configured for UDMA/100 [ 2.162220] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 [ 2.162439] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.162596] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.162651] sd 0:0:0:0: [sda] Write Protect is off [ 2.162655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.162682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.162861] sda: [ 2.316384] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f76ba406e76] [ 2.557729] sda1 sda2 < sda5 > [ 2.589262] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.140660] xor: automatically using best checksumming function: pIII_sse [ 3.160006] pIII_sse : 5216.000 MB/sec [ 3.160009] xor: using function: pIII_sse (5216.000 MB/sec) [ 3.163645] device-mapper: dm-raid45: initialized v0.2594b [ 3.314104] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 13.423522] udev: starting version 151 [ 13.475919] Adding 3227640k swap on /dev/sda5. Priority:-1 extents:1 across:3227640k [ 13.482986] lp: driver loaded but no devices found [ 13.552287] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 13.552356] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 13.658711] Linux agpgart interface v0.103 [ 13.823987] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 13.826284] sdhci: Secure Digital Host Controller Interface driver [ 13.826289] sdhci: Copyright(c) Pierre Ossman [ 13.828048] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22) [ 13.828496] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 13.828503] sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 13.834743] ricoh-mmc: Ricoh MMC Controller disabling driver [ 13.834747] ricoh-mmc: Copyright(c) Philip Langdale [ 13.836965] Registered led device: mmc0:: [ 13.838062] mmc0: SDHCI controller on PCI [0000:01:04.1] using PIO [ 13.838099] ricoh-mmc: Ricoh MMC controller found at 0000:01:04.2 [1180:0843] (rev 12) [ 13.838118] ricoh-mmc: Controller is now disabled. [ 13.838400] cfg80211: Calling CRDA to update world regulatory domain [ 13.889113] cfg80211: World regulatory domain updated: [ 13.889119] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.889124] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.889129] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.889133] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.889136] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.889140] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.913674] type=1505 audit(1390423318.737:2): operation="profile_load" pid=719 name="/sbin/dhclient3" [ 13.914031] type=1505 audit(1390423318.737:3): operation="profile_load" pid=719 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.914237] type=1505 audit(1390423318.737:4): operation="profile_load" pid=719 name="/usr/lib/connman/scripts/dhclient-script" [ 13.916400] type=1505 audit(1390423318.737:5): operation="profile_replace" pid=721 name="/sbin/dhclient3" [ 13.916777] type=1505 audit(1390423318.737:6): operation="profile_replace" pid=721 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.916995] type=1505 audit(1390423318.737:7): operation="profile_replace" pid=721 name="/usr/lib/connman/scripts/dhclient-script" [ 14.432930] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8 [ 14.466012] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 14.667762] type=1505 audit(1390423319.488:8): operation="profile_load" pid=835 name="/usr/share/gdm/guest-session/Xsession" [ 14.668302] type=1505 audit(1390423319.492:9): operation="profile_replace" pid=836 name="/sbin/dhclient3" [ 14.668684] type=1505 audit(1390423319.492:10): operation="profile_replace" pid=836 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.668901] type=1505 audit(1390423319.492:11): operation="profile_replace" pid=836 name="/usr/lib/connman/scripts/dhclient-script" [ 14.767952] alloc irq_desc for 27 on node -1 [ 14.767957] alloc kstat_irqs on node -1 [ 14.767971] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X [ 14.768185] eth0: no link during initialization. [ 14.769084] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.819617] nvidia: module license 'NVIDIA' taints kernel. [ 14.819623] Disabling lock debugging due to kernel taint [ 16.143236] acer-wmi: Acer Laptop ACPI-WMI Extras [ 16.145385] lirc_dev: IR Remote Control driver registered, major 61 [ 16.146311] lirc_dev: lirc_register_driver: sample_rate: 0 [ 16.146444] enecir: KB3926B detected [ 16.146448] enecir: chip is 0x3909 - 0x24, 0xc0 [ 16.146450] enecir: driver has been succesfully loaded [ 16.201991] ppdev: user-space parallel port driver [ 16.209839] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 16.209847] alloc irq_desc for 19 on node -1 [ 16.209851] alloc kstat_irqs on node -1 [ 16.209864] ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 16.209874] ath5k 0000:05:00.0: setting latency timer to 64 [ 16.209938] ath5k 0000:05:00.0: registered as 'phy0' [ 16.393660] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17 [ 16.393668] alloc irq_desc for 17 on node -1 [ 16.393671] alloc kstat_irqs on node -1 [ 16.393685] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 17 (level, low) -> IRQ 17 [ 16.393695] nvidia 0000:00:12.0: setting latency timer to 64 [ 16.393702] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 16.395119] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 16.518719] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 16.518728] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 16.518733] hda_intel: Disable MSI for Nvidia chipset [ 16.518782] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 16.703819] ath: EEPROM regdomain: 0x65 [ 16.703825] ath: EEPROM indicates we should expect a direct regpair map [ 16.703831] ath: Country alpha2 being used: 00 [ 16.703833] ath: Regpair used: 0x65 [ 16.714637] phy0: Selected rate control algorithm 'minstrel' [ 16.715576] Registered led device: ath5k-phy0::rx [ 16.715602] Registered led device: ath5k-phy0::tx [ 16.715607] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 16.795236] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.230864] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input10 [ 24.748670] wlan0: deauthenticating from 00:03:d8:01:9e:12 by local choice (reason=3) [ 24.775651] wlan0: direct probe to AP 00:03:d8:01:9e:12 (try 1) [ 24.780308] wlan0: direct probe responded [ 24.780312] wlan0: authenticate with AP 00:03:d8:01:9e:12 (try 1) [ 24.782216] wlan0: authenticated [ 24.782238] wlan0: associate with AP 00:03:d8:01:9e:12 (try 1) [ 24.785001] wlan0: RX AssocResp from 00:03:d8:01:9e:12 (capab=0x431 status=0 aid=3) [ 24.785004] wlan0: associated [ 24.785798] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.838177] padlock: VIA PadLock not detected. [ 35.324046] wlan0: no IPv6 routers present [ 74.756883] I-pipe: Domain RTAI registered. [ 74.756893] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 74.756897] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 74.756953] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 74.756956] PIPELINE layers: [ 74.756960] f896ae20 9ac15d93 RTAI 200 [ 74.756963] c085cb20 0 Linux 100 [ 74.784966] RTAI[malloc]: global heap size = 2097152 bytes, . [ 74.785573] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 74.785582] RTAI[sched]: hard timer type/freq = APIC/12501578(Hz); default timing: periodic; linear timed lists. [ 74.785587] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1700023000 hz. [ 74.785590] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 74.785696] RTAI[usi]: enabled. [ 74.851690] RTAI[math]: loaded. [ 84.752135] RTAI[math]: unloaded. [ 84.800144] SCHED releases registered named ALIEN RTGLBH [ 84.833054] RTAI[malloc]: unloaded. [ 84.932036] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 84.936133] I-pipe: Domain RTAI unregistered. [ 84.936203] RTAI[hal]: unmounted.