ef@pl ~/linuxcnc/configs/NativeCAM $ linuxcnc /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/mill-mm.ini
LINUXCNC - 2.8.0-pre1-2648-gd1919c5
Machine configuration directory is '/home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo'
Machine configuration file is 'mill-mm.ini'
Starting LinuxCNC...
Found file(REL): ./core_sim.hal
Note: Using POSIX non-realtime
Found file(REL): ./sim_spindle_encoder.hal
Found file(REL): ./axis_manualtoolchange.hal
Found file(REL): ./simulated_home.hal
link (updating variable file): File o directory non esistente
note: MAXV     max: 53.340 units/sec 3200.400 units/min
note: LJOG     max: 53.340 units/sec 3200.400 units/min
note: LJOG default: 30.480 units/sec 1828.800 units/min
note: jog_order='XYZ'
note: jog_invert=set([])

NativeCAM info:
    inifile = /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/mill-mm.ini
    SYS_DIR = /home/ef/linuxcnc/configs/NativeCAM
   NCAM_DIR = /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam
    program = /usr/lib/python2.7/dist-packages/gladevcp/ncam.py
  real path = /home/ef/linuxcnc/configs/NativeCAM/ncam.py

Created   2 files in /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam/catalogs
task: main loop took 0.010067 seconds
Created  48 files in /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam/cfg
Created  45 files in /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam/lib
task: main loop took 0.010200 seconds
Created 151 files in /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam/graphics
Created   3 files in /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam/xml

[RS274NGC]SUBROUTINE_PATH = ncam/lib/mill:ncam/lib/utilities
   SUBROUTINE_PATH[0] (realpath) = /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam/lib/mill
   SUBROUTINE_PATH[1] (realpath) = /home/ef/linuxcnc/configs/NativeCAM/configs/sim/axis/ncam_demo/ncam/lib/utilities

Using standard menu.xml, no menu-custom.xml found

Can not find file quick_access.lst
Can not find file current_work.xml
Can not find file def_template.xml
<class 'Xlib.protocol.request.QueryExtension'>
<class 'Xlib.protocol.request.QueryExtension'>

task: main loop took 0.016397 seconds
task: main loop took 0.012305 seconds
task: main loop took 0.011274 seconds
task: main loop took 0.010462 seconds
task: main loop took 0.015269 seconds
task: main loop took 0.021025 seconds
task: main loop took 0.011835 seconds
task: main loop took 0.011333 seconds
Can not find file def_template.xml
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3987: Warning: Source ID 21 was not found when attempting to remove it
  gobject.source_remove(self.timeout)
Drill info : diameter = 4.000000, point angle = 118°, point length = 1.201721
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3987: Warning: Source ID 4410 was not found when attempting to remove it
  gobject.source_remove(self.timeout)
Drill info : diameter = 4.000000, point angle = 118°, point length = 1.201721
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3987: Warning: Source ID 5535 was not found when attempting to remove it
  gobject.source_remove(self.timeout)
Drill info : diameter = 4.000000, point angle = 118°, point length = 1.201721
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3987: Warning: Source ID 6144 was not found when attempting to remove it
  gobject.source_remove(self.timeout)
Drill info : diameter = 4.000000, point angle = 118°, point length = 1.201721
Can not find file def_template.xml
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3987: Warning: Source ID 6295 was not found when attempting to remove it
  gobject.source_remove(self.timeout)
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3827: GtkWarning: gtk_tree_model_filter_get_path: assertion 'GTK_TREE_MODEL_FILTER (model)->priv->stamp == iter->stamp' failed
  next_path = self.master_filter.get_path(self.iter_previous)
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3834: GtkWarning: IA__gtk_tree_store_remove: assertion 'VALID_ITER (iter, tree_store)' failed
  self.treestore.remove(self.selected_feature_ts_itr)
/usr/lib/python2.7/dist-packages/gladevcp/ncam.py:3987: Warning: Source ID 6353 was not found when attempting to remove it
  gobject.source_remove(self.timeout)
/usr/bin/gladevcp:295: GtkWarning: GdkWindow 0x4600003 unexpectedly destroyed
  gtk.main()
**** GLADE VCP ERROR:    X Protocol Error: 3
Shutting down and cleaning up LinuxCNC...
task: 247345 cycles, min=0.000010, max=0.021025, avg=0.001134, 38 latency excursions (> 10x expected cycle time of 0.001000s)
Note: Using POSIX non-realtime
ef@pl ~/linuxcnc/configs/NativeCAM $