Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.4 Machine configuration directory is '/home/murray/linuxcnc/configs/gmoccapy_Bantam' Machine configuration file is 'combined.ini' INIFILE=/home/murray/linuxcnc/configs/gmoccapy_Bantam/combined.ini VERSION=1.1 check_config: Unexpected multiple values [JOINT_1]HOME_OFFSET: 5.0 0.0 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=gmoccapy COORDINATES=XZ KINEMATICS=trivkins coordinates=XZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./combined.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: gmoccapy task: main loop took 0.148064 seconds Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 1084 cycles, min=0.000034, max=0.148064, avg=0.010011, 1 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:02:00.0 hm2/hm2_5i25.0: Low Level init 0.15 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort hm2/hm2_5i25.0: IO Pin 003 (P3-15): IOPort hm2/hm2_5i25.0: IO Pin 004 (P3-03): IOPort hm2/hm2_5i25.0: IO Pin 005 (P3-16): IOPort hm2/hm2_5i25.0: IO Pin 006 (P3-04): IOPort hm2/hm2_5i25.0: IO Pin 007 (P3-17): IOPort hm2/hm2_5i25.0: IO Pin 008 (P3-05): IOPort hm2/hm2_5i25.0: IO Pin 009 (P3-06): IOPort hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder Select #2, pin Mux Select 0 (Output) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 014 (P3-11): IOPort hm2/hm2_5i25.0: IO Pin 015 (P3-12): IOPort hm2/hm2_5i25.0: IO Pin 016 (P3-13): IOPort hm2/hm2_5i25.0: IO Pin 017 (P2-01): StepGen #0, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 018 (P2-14): StepGen #0, pin Step (Output) hm2/hm2_5i25.0: IO Pin 019 (P2-02): StepGen #1, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 020 (P2-15): StepGen #1, pin Step (Output) hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_5i25.0: IO Pin 028 (P2-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 032 (P2-12): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 033 (P2-13): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532) (gmoccapy:12018): Gtk-CRITICAL **: 17:34:09.635: gtk_entry_set_text: assertion 'text != NULL' failed 17:34:12.498 WARNING Config: mousetweaks GSettings schema not found, mousetweaks integration disabled. [Gmoccapy.GMOCCAPY.GETINIINFO][WARNING] Wrong entry [DISPLAY] CYCLE_TIME in INI File! Will use gmoccapy default 150 (getiniinfo.py:56) gmoccapy_postgui.hal:9: Signal 'tool-change-confirmed' can not add OUT pin 'gmoccapy.toolchange-changed', it already has OUT pin 'hal_manualtoolchange.changed' /usr/lib/python3/dist-packages/gi/overrides/GObject.py:493: Warning: ../../../gobject/gsignal.c:2772: instance '0x1e980c60' has no handler with id '77594646' return func(*args, **kwargs) 11981 12014 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7f3d6a981000 Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Fri 28 Nov 17:36:39 GMT 2025 UTC Date: Fri 28 Nov 17:36:39 UTC 2025 this program: /usr/bin/linuxcnc_info uptime: 17:36:39 up 1:27, 1 user, load average: 3.05, 2.45, 2.12 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/murray/linuxcnc/configs/gmoccapy_Bantam USER: murray LOGNAME: murray HOME: /home/murray EDITOR: VISUAL: LANGUAGE: en_GB:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 3840x1080 pixels (1016x285 millimeters) PATH: /usr/bin:/home/murray/linuxcnc/configs/gmoccapy_Bantam/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: LinuxCNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.124-1 (2025-01-12) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-30-rt-amd64 root=UUID=0ebcc7bb-2965-471d-897f-c77c78254bba ro quiet model name: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz cores: 4 cpu MHz: 2416.685 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.4 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-de 1:2.9.4 all motion controller for CNC machines and robots (German documentation) ii linuxcnc-doc-en 1:2.9.4 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.9.4 all motion controller for CNC machines and robots (Spanish documentation) ii linuxcnc-doc-fr 1:2.9.4 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.9.4 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.4 amd64 PC based motion controller for real-time Linux