Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.0 Machine configuration directory is '/home/mauro/linuxcnc/configs/plasma7i80' Machine configuration file is 'plasma7i80.ini' INIFILE=/home/mauro/linuxcnc/configs/plasma7i80/plasma7i80.ini VERSION=1.1 PARAMETER_FILE=metric_parameters.txt TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=X Y Z KINEMATICS=trivkins Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui twopass:invoked with <> options twopass:found ./plasma7i80.hal twopass:found ./plasmac.tcl twopass:found ./plasma7i80_connections.hal Starting TASK program: milltask Starting DISPLAY program: axis 73400323 gladevcp: trouble looking for handlers in 'plasmac_run': [Errno 2] No such file or directory 69206019 75497475 Axis window is 1016 x 702 Shutting down and cleaning up LinuxCNC... task: 149 cycles, min=0.000042, max=0.011794, avg=0.008079, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: Hardware address: 00:60:1b:10:00:59 hm2_eth: discovered 7I80DB-16 hm2/hm2_7i80.0: 68 I/O Pins used: hm2/hm2_7i80.0: IO Pin 000 (J2-01): Encoder #1, pin B (Input) hm2/hm2_7i80.0: IO Pin 001 (J2-14): Encoder #1, pin A (Input) hm2/hm2_7i80.0: IO Pin 002 (J2-02): Encoder #2, pin B (Input) hm2/hm2_7i80.0: IO Pin 003 (J2-15): Encoder #2, pin A (Input) hm2/hm2_7i80.0: IO Pin 004 (J2-03): Encoder #1, pin Index (Input) hm2/hm2_7i80.0: IO Pin 005 (J2-16): Encoder #2, pin Index (Input) hm2/hm2_7i80.0: IO Pin 006 (J2-04): PWMGen #1, pin Out0 (PWM or Up) (Output) hm2/hm2_7i80.0: IO Pin 007 (J2-17): PWMGen #2, pin Out0 (PWM or Up) (Output) hm2/hm2_7i80.0: IO Pin 008 (J2-05): PWMGen #1, pin Out1 (Dir or Down) (Output) hm2/hm2_7i80.0: IO Pin 009 (J2-06): PWMGen #2, pin Out1 (Dir or Down) (Output) hm2/hm2_7i80.0: IO Pin 010 (J2-07): PWMGen #1, pin Not-Enable (Output) hm2/hm2_7i80.0: IO Pin 011 (J2-08): PWMGen #2, pin Not-Enable (Output) hm2/hm2_7i80.0: IO Pin 012 (J2-09): IOPort hm2/hm2_7i80.0: IO Pin 013 (J2-10): IOPort hm2/hm2_7i80.0: IO Pin 014 (J2-11): IOPort hm2/hm2_7i80.0: IO Pin 015 (J2-12): IOPort hm2/hm2_7i80.0: IO Pin 016 (J2-13): IOPort hm2/hm2_7i80.0: IO Pin 017 (J3-01): Encoder #0, pin B (Input) hm2/hm2_7i80.0: IO Pin 018 (J3-14): Encoder #0, pin A (Input) hm2/hm2_7i80.0: IO Pin 019 (J3-02): Encoder #3, pin B (Input) hm2/hm2_7i80.0: IO Pin 020 (J3-15): Encoder #3, pin A (Input) hm2/hm2_7i80.0: IO Pin 021 (J3-03): Encoder #0, pin Index (Input) hm2/hm2_7i80.0: IO Pin 022 (J3-16): Encoder #3, pin Index (Input) hm2/hm2_7i80.0: IO Pin 023 (J3-04): PWMGen #0, pin Out0 (PWM or Up) (Output) hm2/hm2_7i80.0: IO Pin 024 (J3-17): IOPort hm2/hm2_7i80.0: IO Pin 025 (J3-05): PWMGen #0, pin Out1 (Dir or Down) (Output) hm2/hm2_7i80.0: IO Pin 026 (J3-06): IOPort hm2/hm2_7i80.0: IO Pin 027 (J3-07): PWMGen #0, pin Not-Enable (Output) hm2/hm2_7i80.0: IO Pin 028 (J3-08): IOPort hm2/hm2_7i80.0: IO Pin 029 (J3-09): IOPort hm2/hm2_7i80.0: IO Pin 030 (J3-10): IOPort hm2/hm2_7i80.0: IO Pin 031 (J3-11): IOPort hm2/hm2_7i80.0: IO Pin 032 (J3-12): IOPort hm2/hm2_7i80.0: IO Pin 033 (J3-13): IOPort hm2/hm2_7i80.0: IO Pin 034 (J4-01): IOPort hm2/hm2_7i80.0: IO Pin 035 (J4-14): IOPort hm2/hm2_7i80.0: IO Pin 036 (J4-02): IOPort hm2/hm2_7i80.0: IO Pin 037 (J4-15): IOPort hm2/hm2_7i80.0: IO Pin 038 (J4-03): IOPort hm2/hm2_7i80.0: IO Pin 039 (J4-16): IOPort hm2/hm2_7i80.0: IO Pin 040 (J4-04): IOPort hm2/hm2_7i80.0: IO Pin 041 (J4-17): IOPort hm2/hm2_7i80.0: IO Pin 042 (J4-05): IOPort hm2/hm2_7i80.0: IO Pin 043 (J4-06): IOPort hm2/hm2_7i80.0: IO Pin 044 (J4-07): IOPort hm2/hm2_7i80.0: IO Pin 045 (J4-08): IOPort hm2/hm2_7i80.0: IO Pin 046 (J4-09): IOPort hm2/hm2_7i80.0: IO Pin 047 (J4-10): IOPort hm2/hm2_7i80.0: IO Pin 048 (J4-11): IOPort hm2/hm2_7i80.0: IO Pin 049 (J4-12): IOPort hm2/hm2_7i80.0: IO Pin 050 (J4-13): IOPort hm2/hm2_7i80.0: IO Pin 051 (J5-01): IOPort hm2/hm2_7i80.0: IO Pin 052 (J5-14): IOPort hm2/hm2_7i80.0: IO Pin 053 (J5-02): IOPort hm2/hm2_7i80.0: IO Pin 054 (J5-15): IOPort hm2/hm2_7i80.0: IO Pin 055 (J5-03): IOPort hm2/hm2_7i80.0: IO Pin 056 (J5-16): IOPort hm2/hm2_7i80.0: IO Pin 057 (J5-04): IOPort hm2/hm2_7i80.0: IO Pin 058 (J5-17): IOPort hm2/hm2_7i80.0: IO Pin 059 (J5-05): IOPort hm2/hm2_7i80.0: IO Pin 060 (J5-06): IOPort hm2/hm2_7i80.0: IO Pin 061 (J5-07): IOPort hm2/hm2_7i80.0: IO Pin 062 (J5-08): IOPort hm2/hm2_7i80.0: IO Pin 063 (J5-09): IOPort hm2/hm2_7i80.0: IO Pin 064 (J5-10): IOPort hm2/hm2_7i80.0: IO Pin 065 (J5-11): IOPort hm2/hm2_7i80.0: IO Pin 066 (J5-12): IOPort hm2/hm2_7i80.0: IO Pin 067 (J5-13): IOPort hm2/hm2_7i80.0: registered hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime iptables: No chain/target/match by that name. note: MAXV max: 25.000 units/sec 1500.000 units/min note: LJOG max: 25.000 units/sec 1500.000 units/min note: LJOG default: 6.000 units/sec 360.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) Traceback (most recent call last): File "/usr/bin/gladevcp", line 129, in load_handlers objlist = h(halcomp,builder,useropts) File "./plasmac_run.py", line 1256, in get_handlers return [HandlerClass(halcomp,builder,useropts)] File "./plasmac_run.py", line 1196, in __init__ self.upgrade_check() File "./plasmac_run.py", line 1188, in upgrade_check os.execv(cmd,[cmd, 'upgrade', iniFile]) OSError: [Errno 2] No such file or directory /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_single_cut_pressed' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_delete_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_new_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_save_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_reload_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_material_changed' builder.connect_signals(handlers) plasmac_run.hal:21: Pin 'plasmac_run.thc-enable-out' does not exist 'halcmd -f plasmac_run.hal' exited with 1 Could not open command file 'postgui.hal' 1617 1665 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sun Sep 13 22:14:02 CEST 2020 UTC Date: Sun Sep 13 20:14:02 UTC 2020 this program: /usr/bin/linuxcnc_info uptime: 22:14:02 up 1 min, 1 user, load average: 1,14, 0,63, 0,24 lsb_release -sa: LinuxMint Linuxcnc Powered by Linux Mint 19.2 Tina 19.2 tina which linuxcnc: /usr/bin/linuxcnc pwd: /home/mauro/linuxcnc/configs/plasma7i80 USER: mauro LOGNAME: mauro HOME: /home/mauro EDITOR: VISUAL: LANGUAGE: en_US TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: xfce display size: 1440x900 pixels (381x238 millimeters) PATH: /usr/bin:/home/mauro/linuxcnc/configs/plasma7i80/bin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin uname items: nodename -n: mauro-cnc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Thu Mar 5 00:02:34 AEDT 2020 machine -m: x86_64 processor -p: x86_64 platform -i: x86_64 oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.106-rt44-lcnc root=UUID=67ca6766-1055-40ea-9161-d622ddb8960a ro quiet splash model name: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz cores: 2 cpu MHz: 2359.233 parport: serial: Versions: gcc: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 python: Python 2.7.17 git: git version 2.17.1 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.0 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-=======================================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.8.0 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-html 1:2.8.0~pre1~rmurphy.htmldocs~1c3c94442 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.8.0 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.0 amd64 PC based motion controller for real-time Linux