0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517967 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29.4 root=UUID=1da102a4-46b7-439b-8ff8-95e7a57fe767 ro quiet splash isolcpus=1 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1605.459 MHz processor. [ 0.004000] I-pipe 2.4-01: pipeline enabled. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10442880 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Memory: 2046484k/2088640k available (3894k kernel code, 40748k reserved, 1678k data, 436k init, 1179336k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff51000 - 0xfffff000 ( 696 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.004000] .init : 0xc0679000 - 0xc06e6000 ( 436 kB) [ 0.004000] .data : 0xc04cdb98 - 0xc0671720 (1678 kB) [ 0.004000] .text : 0xc0100000 - 0xc04cdb98 (3894 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3210.91 BogoMIPS (lpj=6421836) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] Checking 'hlt' instruction... OK. [ 0.016691] ACPI: Core revision 20081204 [ 0.028484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070981] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3210.82 BogoMIPS (lpj=6421641) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.160343] CPU1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.160365] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164047] Brought up 2 CPUs [ 0.164056] Total of 2 processors activated (6421.73 BogoMIPS). [ 0.164121] CPU0 attaching NULL sched-domain. [ 0.164649] net_namespace: 976 bytes [ 0.165018] regulator: core version 0.5 [ 0.165095] NET: Registered protocol family 16 [ 0.165362] EISA bus registered [ 0.165381] ACPI: bus type pci registered [ 0.165503] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. [ 0.165883] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.165888] PCI: Using configuration type 1 for base access [ 0.167437] bio: create slab at 0 [ 0.169560] ACPI: EC: Look up EC in DSDT [ 0.188250] ACPI: Interpreter enabled [ 0.188257] ACPI: (supports S0 S5) [ 0.188284] ACPI: Using IOAPIC for interrupt routing [ 0.205681] ACPI: No dock devices found. [ 0.206223] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.206366] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff] [ 0.206377] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] [ 0.206387] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff] [ 0.206397] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfea40000-0xfea7ffff] [ 0.206541] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.206549] pci 0000:00:1c.0: PME# disabled [ 0.206628] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.206636] pci 0000:00:1c.1: PME# disabled [ 0.206697] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.206764] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f] [ 0.206830] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] [ 0.206895] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f] [ 0.206951] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfea37c00-0xfea37fff] [ 0.207035] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.207044] pci 0000:00:1d.7: PME# disabled [ 0.207197] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.207205] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.207213] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff) [ 0.207266] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.207277] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.207289] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.207300] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.207311] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.207360] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] [ 0.207371] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] [ 0.207381] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] [ 0.207392] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] [ 0.207402] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] [ 0.207446] pci 0000:00:1f.2: PME# supported from D3hot [ 0.207454] pci 0000:00:1f.2: PME# disabled [ 0.207508] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.207602] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.207649] pci 0000:01:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.207677] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdeff000-0xfdefffff] [ 0.207698] pci 0000:01:00.0: reg 20 64bit mmio: [0xfdef8000-0xfdefbfff] [ 0.207711] pci 0000:01:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebfffff] [ 0.207776] pci 0000:01:00.0: supports D1 D2 [ 0.207781] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207790] pci 0000:01:00.0: PME# disabled [ 0.207855] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.207863] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.207874] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.207935] pci 0000:00:1e.0: transparent bridge [ 0.207967] pci_bus 0000:00: on NUMA node 0 [ 0.207981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.208349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.208528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.216467] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.216750] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.217030] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.217311] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.217592] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.217874] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.218155] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.218437] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.218695] ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - A7, should be A2 [20081204] [ 0.219162] SCSI subsystem initialized [ 0.219299] libata version 3.00 loaded. [ 0.219420] usbcore: registered new interface driver usbfs [ 0.219461] usbcore: registered new interface driver hub [ 0.219527] usbcore: registered new device driver usb [ 0.219797] PCI: Using ACPI for IRQ routing [ 0.232021] Bluetooth: Core ver 2.14 [ 0.232131] NET: Registered protocol family 31 [ 0.232137] Bluetooth: HCI device and connection manager initialized [ 0.232143] Bluetooth: HCI socket layer initialized [ 0.232149] NET: Registered protocol family 8 [ 0.232153] NET: Registered protocol family 20 [ 0.232181] NetLabel: Initializing [ 0.232186] NetLabel: domain hash size = 128 [ 0.232190] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232217] NetLabel: unlabeled traffic allowed by default [ 0.248018] pnp: PnP ACPI init [ 0.248041] ACPI: bus type pnp registered [ 0.257854] pnp: PnP ACPI: found 16 devices [ 0.257861] ACPI: ACPI bus type pnp unregistered [ 0.257868] PnPBIOS: Disabled by ACPI PNP [ 0.257892] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.257911] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.257919] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.257926] system 00:07: ioport range 0x480-0x4bf has been reserved [ 0.257932] system 00:07: ioport range 0x900-0x90f has been reserved [ 0.257940] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.257947] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.257962] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved [ 0.257981] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.257989] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.258003] system 00:0d: ioport range 0x280-0x28f has been reserved [ 0.258010] system 00:0d: ioport range 0x290-0x29f has been reserved [ 0.258023] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.258038] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.258045] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved [ 0.258053] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 0.258060] system 00:0f: iomem range 0x100000-0x7f7fffff could not be reserved [ 0.292902] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.292908] pci 0000:00:1c.0: IO window: disabled [ 0.292917] pci 0000:00:1c.0: MEM window: disabled [ 0.292925] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.292937] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01 [ 0.292944] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.292953] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff [ 0.292960] pci 0000:00:1c.1: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.292971] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.292976] pci 0000:00:1e.0: IO window: disabled [ 0.292984] pci 0000:00:1e.0: MEM window: disabled [ 0.292991] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.293021] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.293030] pci 0000:00:1c.0: setting latency timer to 64 [ 0.293046] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.293055] pci 0000:00:1c.1: setting latency timer to 64 [ 0.293066] pci 0000:00:1e.0: setting latency timer to 64 [ 0.293075] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.293081] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.293087] pci_bus 0000:02: resource 0 mem: [0x0-0x0] [ 0.293092] pci_bus 0000:02: resource 1 mem: [0x0-0x0] [ 0.293098] pci_bus 0000:02: resource 2 mem: [0xfdf00000-0xfdffffff] [ 0.293103] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.293109] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.293115] pci_bus 0000:01: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.293121] pci_bus 0000:01: resource 2 mem: [0xfde00000-0xfdefffff] [ 0.293126] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.293132] pci_bus 0000:03: resource 0 mem: [0x0-0x0] [ 0.293137] pci_bus 0000:03: resource 1 mem: [0x0-0x0] [ 0.293142] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 0.293147] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.293153] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.293225] NET: Registered protocol family 2 [ 0.328147] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.328797] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.329769] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.330239] TCP: Hash tables configured (established 131072 bind 65536) [ 0.330245] TCP reno registered [ 0.340237] NET: Registered protocol family 1 [ 0.340497] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.503999] Switched to high resolution mode on CPU 0 [ 0.741904] it is [ 1.196361] Freeing initrd memory: 6433k freed [ 1.196724] Scanning for low memory corruption every 60 seconds [ 1.196913] audit: initializing netlink socket (disabled) [ 1.196945] type=2000 audit(1404913731.196:1): initialized [ 1.202720] highmem bounce pool size: 64 pages [ 1.202732] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.205877] VFS: Disk quotas dquot_6.5.2 [ 1.206014] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.207325] fuse init (API version 7.11) [ 1.207522] msgmni has been set to 1708 [ 1.207914] alg: No test for stdrng (krng) [ 1.207946] io scheduler noop registered [ 1.207952] io scheduler anticipatory registered [ 1.207956] io scheduler deadline registered [ 1.207998] io scheduler cfq registered (default) [ 1.208053] pci 0000:00:02.0: Boot video device [ 1.208325] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.208402] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 1.208532] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.208602] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 1.209012] processor ACPI_CPU:00: registered as cooling_device0 [ 1.209100] processor ACPI_CPU:01: registered as cooling_device1 [ 1.214991] isapnp: Scanning for PnP cards... [ 1.569086] isapnp: No Plug & Play device found [ 1.571531] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.571665] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.572288] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.574053] brd: module loaded [ 1.574859] loop: module loaded [ 1.575055] Fixed MDIO Bus: probed [ 1.575068] PPP generic driver version 2.4.2 [ 1.575207] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.575279] Driver 'sd' needs updating - please use bus_type methods [ 1.575302] Driver 'sr' needs updating - please use bus_type methods [ 1.575458] ata_piix 0000:00:1f.1: version 2.12 [ 1.575493] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.575562] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.575757] scsi0 : ata_piix [ 1.575967] scsi1 : ata_piix [ 1.579593] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.579603] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.732136] ata2: port disabled. ignoring. [ 1.732207] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.732217] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.732290] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.732404] scsi2 : ata_piix [ 1.732545] scsi3 : ata_piix [ 1.732631] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 1.732638] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 1.912362] ata3.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7 [ 1.912369] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.920392] ata3.00: configured for UDMA/133 [ 1.920609] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5 [ 1.920846] sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors: (400 GB/372 GiB) [ 1.920896] sd 2:0:0:0: [sda] Write Protect is off [ 1.920903] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.920987] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.921145] sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors: (400 GB/372 GiB) [ 1.921192] sd 2:0:0:0: [sda] Write Protect is off [ 1.921199] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.921281] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.921291] sda: sda1 sda2 < sda5 > [ 1.952279] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.952395] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.133430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.133483] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.133531] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.133539] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.133666] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.137583] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.137594] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.137623] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea37c00 [ 2.152022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.152183] usb usb1: configuration #1 chosen from 1 choice [ 2.152251] hub 1-0:1.0: USB hub found [ 2.152268] hub 1-0:1.0: 8 ports detected [ 2.152505] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.152548] uhci_hcd: USB Universal Host Controller Interface driver [ 2.152617] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.152630] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.152637] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.152744] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.152777] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 2.152950] usb usb2: configuration #1 chosen from 1 choice [ 2.153011] hub 2-0:1.0: USB hub found [ 2.153027] hub 2-0:1.0: 2 ports detected [ 2.153205] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.153218] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.153225] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.153322] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.153354] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 2.153522] usb usb3: configuration #1 chosen from 1 choice [ 2.153583] hub 3-0:1.0: USB hub found [ 2.153599] hub 3-0:1.0: 2 ports detected [ 2.153783] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.153795] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.153802] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.153896] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.153942] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 2.154103] usb usb4: configuration #1 chosen from 1 choice [ 2.154180] hub 4-0:1.0: USB hub found [ 2.154196] hub 4-0:1.0: 2 ports detected [ 2.154360] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.154372] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.154379] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.154481] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.154525] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 2.154695] usb usb5: configuration #1 chosen from 1 choice [ 2.154754] hub 5-0:1.0: USB hub found [ 2.154770] hub 5-0:1.0: 2 ports detected [ 2.155060] PNP: No PS/2 controller found. Probing ports directly. [ 2.157498] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.157512] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.168093] mice: PS/2 mouse device common for all mice [ 2.180156] rtc_cmos 00:03: RTC can wake from S4 [ 2.180230] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.180267] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.180519] device-mapper: uevent: version 1.0.3 [ 2.180742] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.180958] device-mapper: multipath: version 1.0.5 loaded [ 2.180965] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.181172] EISA: Probing bus 0 at eisa.0 [ 2.181214] EISA: Detected 0 cards. [ 2.181220] cpuidle: using governor ladder [ 2.181225] cpuidle: using governor menu [ 2.182261] TCP cubic registered [ 2.182632] NET: Registered protocol family 10 [ 2.183611] lo: Disabled Privacy Extensions [ 2.184398] NET: Registered protocol family 17 [ 2.184449] Bluetooth: L2CAP ver 2.11 [ 2.184453] Bluetooth: L2CAP socket layer initialized [ 2.184460] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.184464] Bluetooth: SCO socket layer initialized [ 2.184540] Bluetooth: RFCOMM socket layer initialized [ 2.184555] Bluetooth: RFCOMM TTY layer initialized [ 2.184559] Bluetooth: RFCOMM ver 1.10 [ 2.184624] Using IPI No-Shortcut mode [ 2.184816] registered taskstats version 1 [ 2.185114] rtc_cmos 00:03: setting system clock to 2014-07-09 13:48:53 UTC (1404913733) [ 2.185122] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.185127] EDD information not available. [ 2.185508] Freeing unused kernel memory: 436k freed [ 2.185703] Write protecting the kernel text: 3896k [ 2.185772] Write protecting the kernel read-only data: 1340k [ 2.628377] Linux agpgart interface v0.103 [ 2.704165] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 2.763812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.763842] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.763867] r8169 0000:01:00.0: setting latency timer to 64 [ 2.764080] r8169 0000:01:00.0: irq 26 for MSI/MSI-X [ 2.765455] eth0: RTL8168d/8111d at 0xf8076000, 00:25:22:20:d5:65, XID 281000c0 IRQ 26 [ 2.777927] agpgart-intel 0000:00:00.0: Intel 945G Chipset [ 2.778189] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 2.780880] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 2.886822] usb 4-1: configuration #1 chosen from 1 choice [ 2.907726] usbcore: registered new interface driver hiddev [ 2.921518] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1 [ 2.952169] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1/input0 [ 2.952220] usbcore: registered new interface driver usbhid [ 2.952228] usbhid: v2.6:USB HID core driver [ 3.132048] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 3.292304] usb 5-1: configuration #1 chosen from 1 choice [ 3.311353] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input2 [ 3.348167] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.3-1/input0 [ 3.371072] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input3 [ 3.396166] generic-usb 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.3-1/input1 [ 3.924463] EXT4-fs: barriers enabled [ 3.939866] EXT4-fs: delayed allocation enabled [ 3.939872] EXT4-fs: file extents enabled [ 3.949323] kjournald2 starting: pid 290, dev sda1:8, commit interval 5 seconds [ 4.060757] EXT4-fs: mballoc enabled [ 4.060767] EXT4-fs: mounted filesystem sda1 with ordered data mode [ 5.426400] Adding 6016300k swap on /dev/sda5. Priority:-1 extents:1 across:6016300k [ 5.649363] EXT4 FS on sda1, internal journal on sda1:8 [ 5.863579] udev: starting version 147 [ 6.783324] intel_rng: FWH not detected [ 6.892554] lp: driver loaded but no devices found [ 7.432343] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.452227] r8169: eth0: link down [ 10.452596] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.115395] ppdev: user-space parallel port driver [ 13.123442] [drm] Initialized drm 1.1.0 20060810 [ 13.152685] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.152696] pci 0000:00:02.0: setting latency timer to 64 [ 13.157980] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 13.667938] CPU0 attaching NULL sched-domain. [ 13.676112] CPU0 attaching sched-domain: [ 13.676120] domain 0: span 0-1 level MC [ 13.676127] groups: 0 1 [ 13.676136] domain 1: span 0-1 level CPU [ 13.676142] groups: 0-1 [ 13.676152] CPU1 attaching sched-domain: [ 13.676156] domain 0: span 0-1 level MC [ 13.676162] groups: 1 0 [ 13.676170] domain 1: span 0-1 level CPU [ 13.676176] groups: 0-1 [ 18.605958] CPU0 attaching NULL sched-domain. [ 18.605971] CPU1 attaching NULL sched-domain. [ 18.620135] CPU0 attaching sched-domain: [ 18.620144] domain 0: span 0-1 level CPU [ 18.620151] groups: 0 1 [ 18.620164] CPU1 attaching sched-domain: [ 18.620169] domain 0: span 0-1 level CPU [ 18.620175] groups: 1 0 [ 42.018076] I-pipe: Domain RTAI registered. [ 42.018090] RTAI[hal]: <3.7.1> mounted over IPIPE-NOTHREADS 2.4-01. [ 42.018095] RTAI[hal]: compiled with gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) . [ 42.018210] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 42.018216] PIPELINE layers: [ 42.018221] f8497b80 9ac15d93 RTAI 200 [ 42.018226] c0740700 0 Linux 100 [ 42.067585] RTAI[malloc]: global heap size = 2097152 bytes, . [ 42.067918] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 42.067934] RTAI[sched]: hard timer type/freq = APIC/8360957(Hz); default timing: periodic; linear timed lists. [ 42.067945] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1605459000 hz. [ 42.067952] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 42.067957] RTAI[usi]: enabled. [ 42.251281] RTAI[math]: loaded. [ 42.439633] config string '0x378 out ' [ 89.680105] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling... [ 89.680119] usb 5-1: USB disconnect, address 2 [ 90.020110] usb 5-1: new low speed USB device using uhci_hcd and address 3 [ 90.186105] usb 5-1: configuration #1 chosen from 1 choice [ 90.205892] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4 [ 90.250923] generic-usb 0003:04F3:0103.0004: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.3-1/input0 [ 90.303121] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input5 [ 90.336432] generic-usb 0003:04F3:0103.0005: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.3-1/input1 [20822.845321] RTAPI: ERROR: Unexpected realtime delay on task 1 [20822.845325] This Message will only display once per session. [20822.845336] Run the Latency Test and resolve before continuing. [20822.845345] 20978256: ERROR: Unexpected realtime delay: check dmesg for details. [20822.845360] [20822.845362] In recent history there were [20822.845364] 1591308, 1588848, 1589844, 1589868, and 1598304 [20822.845367] elapsed clocks between calls to the motion controller. [20822.845382] This time, there were 2067555644 which is so anomalously [20822.845385] large that it probably signifies a problem with your [20822.845388] realtime configuration. For the rest of this run of [20822.845398] EMC, this message will be suppressed. [20822.845400] [20822.845405] 20978256: ERROR: joint 0 following error [20822.845417] 20978256: ERROR: joint 1 following error [612372.415448] parport_pc 00:06: disabled [612373.345140] RTAI[math]: unloaded. [612373.584545] RTAI[malloc]: unloaded. [612373.684101] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [612373.690609] I-pipe: Domain RTAI unregistered. [612373.690738] RTAI[hal]: unmounted. rob@robotron-cnc-2:~$ ^C rob@robotron-cnc-2:~$