Machine configuration directory is '/home/k1/linuxcnc/configs/BP-5i25'
Machine configuration file is 'bp.ini'
Starting LinuxCNC...
Found file(REL): ./bp.hal
spindle-vfd: device='/dev/ttyS0', baud=38400, parity='N', bits=8, stopbits=2, address=1, enabled=1
failed to read register P0.00 (Motor Nameplate Voltage)
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
contatto sul limite 0
emc/task/taskintf.cc 617: Error on axis 0, command number 107
emc/task/taskintf.cc 617: Error on axis 1, command number 107
emc/task/taskintf.cc 617: Error on axis 2, command number 107
contatto sul limite 1
contatto sul limite 2
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
contatto sul limite 0
emc/task/taskintf.cc 617: Error on axis 0, command number 122
emc/task/taskintf.cc 617: Error on axis 1, command number 122
emc/task/taskintf.cc 617: Error on axis 2, command number 122
contatto sul limite 1
contatto sul limite 2
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
failed to set register P0x0101 to 0x0064 (100): Connection timed out
Shutting down and cleaning up LinuxCNC...
task: 5376 cycles, min=0.000048, max=0.091318, avg=0.010096, 0 latency excursions (> 10x expected cycle time of 0.010000s)
failed to set register P0x0101 to 0x0064 (100): Connection timed out