[ 0.550960] domain 1: span 2-3 level MC [ 0.550965] groups: 2-3 (cpu_power = 1178) [ 0.550973] domain 2: span 0-3 level CPU [ 0.550977] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.550990] CPU3 attaching sched-domain: [ 0.550994] domain 0: span 2-3 level SIBLING [ 0.550998] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 0.551009] domain 1: span 2-3 level MC [ 0.551014] groups: 2-3 (cpu_power = 1178) [ 0.551022] domain 2: span 0-3 level CPU [ 0.551027] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.551708] devtmpfs: initialized [ 0.552383] regulator: core version 0.5 [ 0.552474] NET: Registered protocol family 16 [ 0.552698] Trying to unpack rootfs image as initramfs... [ 0.552764] EISA bus registered [ 0.552779] ACPI: bus type pci registered [ 0.552896] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.552903] PCI: MCFG area at e0000000 reserved in E820 [ 0.552906] PCI: Using MMCONFIG for extended config space [ 0.552911] PCI: Using configuration type 1 for base access [ 0.554739] bio: create slab at 0 [ 0.556538] ACPI: EC: Look up EC in DSDT [ 0.561611] ACPI: Executed 1 blocks of module-level executable AML code [ 0.565607] ACPI: BIOS _OSI(Linux) query ignored [ 0.569823] ACPI: Interpreter enabled [ 0.569828] ACPI: (supports S0 S5) [ 0.569851] ACPI: Using IOAPIC for interrupt routing [ 0.585334] ACPI: No dock devices found. [ 0.586105] _OSC invalid UUID [ 0.586111] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.586241] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfd00000-0xdfdfffff] [ 0.586250] pci 0000:00:02.0: reg 14 io port: [0xf0f0-0xf0f7] [ 0.586379] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdff00000-0xdff03fff] [ 0.586443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.586451] pci 0000:00:1b.0: PME# disabled [ 0.586554] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.586563] pci 0000:00:1c.0: PME# disabled [ 0.586640] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f] [ 0.586715] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f] [ 0.586785] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f] [ 0.586856] pci 0000:00:1d.3: reg 20 io port: [0xf020-0xf03f] [ 0.586930] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff05000-0xdff053ff] [ 0.586999] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.587007] pci 0000:00:1d.7: PME# disabled [ 0.587232] pci 0000:00:1f.2: reg 10 io port: [0xf0e0-0xf0e7] [ 0.587243] pci 0000:00:1f.2: reg 14 io port: [0xf0d0-0xf0d3] [ 0.587254] pci 0000:00:1f.2: reg 18 io port: [0xf0c0-0xf0c7] [ 0.587264] pci 0000:00:1f.2: reg 1c io port: [0xf0b0-0xf0b3] [ 0.587275] pci 0000:00:1f.2: reg 20 io port: [0xf0a0-0xf0af] [ 0.587285] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdff04000-0xdff043ff] [ 0.587316] pci 0000:00:1f.2: PME# supported from D3hot [ 0.587323] pci 0000:00:1f.2: PME# disabled [ 0.587386] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 0.587482] pci 0000:01:00.0: reg 10 io port: [0xe000-0xe0ff] [ 0.587510] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xdfe04000-0xdfe04fff] [ 0.587531] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xdfe00000-0xdfe03fff] [ 0.587593] pci 0000:01:00.0: supports D1 D2 [ 0.587597] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.587605] pci 0000:01:00.0: PME# disabled [ 0.587688] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff] [ 0.587696] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 0.587737] pci 0000:02:00.0: reg 10 io port: [0xd010-0xd017] [ 0.587749] pci 0000:02:00.0: reg 14 io port: [0xd000-0xd007] [ 0.587850] pci 0000:00:1e.0: transparent bridge [ 0.587857] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.587883] pci_bus 0000:00: on NUMA node 0 [ 0.587895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.588134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.588319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.588632] _OSC invalid UUID [ 0.599855] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.600061] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.600269] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.600471] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.600671] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.600882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.601087] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.601291] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.601507] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.601525] vgaarb: loaded [ 0.601775] SCSI subsystem initialized [ 0.602088] libata version 3.00 loaded. [ 0.602251] usbcore: registered new interface driver usbfs [ 0.602285] usbcore: registered new interface driver hub [ 0.602368] usbcore: registered new device driver usb [ 0.602666] ACPI: WMI: Mapper loaded [ 0.602671] PCI: Using ACPI for IRQ routing [ 0.602922] NetLabel: Initializing [ 0.602926] NetLabel: domain hash size = 128 [ 0.602930] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.602954] NetLabel: unlabeled traffic allowed by default [ 0.603038] Switching to clocksource tsc [ 0.608851] AppArmor: AppArmor Filesystem Enabled [ 0.608887] pnp: PnP ACPI init [ 0.608928] ACPI: bus type pnp registered [ 0.618411] pnp: PnP ACPI: found 13 devices [ 0.618421] ACPI: ACPI bus type pnp unregistered [ 0.618429] PnPBIOS: Disabled by ACPI PNP [ 0.618474] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.618494] system 00:05: ioport range 0x680-0x69f has been reserved [ 0.618504] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.618515] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.618524] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.618532] system 00:05: ioport range 0x400-0x47f has been reserved [ 0.618541] system 00:05: ioport range 0x500-0x57f has been reserved [ 0.618550] system 00:05: ioport range 0x600-0x61f has been reserved [ 0.618566] system 00:06: ioport range 0x6a0-0x6af has been reserved [ 0.618575] system 00:06: ioport range 0x6b0-0x6ff has been reserved [ 0.618591] system 00:08: ioport range 0x290-0x29f has been reserved [ 0.618612] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.618628] system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.618637] system 00:0c: iomem range 0x0-0x3fff could not be reserved [ 0.618646] system 00:0c: iomem range 0x0-0xfff could not be reserved [ 0.618654] system 00:0c: iomem range 0x0-0xfff could not be reserved [ 0.618663] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.653694] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.653702] pci 0000:00:1c.0: IO window: 0xe000-0xefff [ 0.653711] pci 0000:00:1c.0: MEM window: 0xdfe00000-0xdfefffff [ 0.653719] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff [ 0.653730] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.653737] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.653745] pci 0000:00:1e.0: MEM window: disabled [ 0.653752] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.653777] alloc irq_desc for 16 on node -1 [ 0.653781] alloc kstat_irqs on node -1 [ 0.653793] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.653801] pci 0000:00:1c.0: setting latency timer to 64 [ 0.653814] pci 0000:00:1e.0: setting latency timer to 64 [ 0.653823] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.653828] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.653834] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.653839] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff] [ 0.653845] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x801fffff] [ 0.653851] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.653856] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.653861] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.653923] NET: Registered protocol family 2 [ 0.654108] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.654707] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.655573] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.655980] TCP: Hash tables configured (established 131072 bind 65536) [ 0.655985] TCP reno registered [ 0.656166] NET: Registered protocol family 1 [ 0.656204] pci 0000:00:02.0: Boot video device [ 0.657062] Scanning for low memory corruption every 60 seconds [ 0.657242] audit: initializing netlink socket (disabled) [ 0.657261] type=2000 audit(1433771267.470:1): initialized [ 0.670017] highmem bounce pool size: 64 pages [ 0.670027] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.673262] VFS: Disk quotas dquot_6.5.2 [ 0.673385] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.674635] fuse init (API version 7.13) [ 0.674816] msgmni has been set to 1680 [ 0.675395] alg: No test for stdrng (krng) [ 0.675529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.675536] io scheduler noop registered [ 0.675541] io scheduler anticipatory registered [ 0.675545] io scheduler deadline registered [ 0.675637] io scheduler cfq registered (default) [ 0.675858] alloc irq_desc for 24 on node -1 [ 0.675863] alloc kstat_irqs on node -1 [ 0.675880] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.675894] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.676052] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.676261] _OSC invalid UUID [ 0.676473] _OSC invalid UUID [ 0.676510] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.676669] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.676676] ACPI: Power Button [PWRB] [ 0.676761] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.676767] ACPI: Sleep Button [SLPB] [ 0.676856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.676862] ACPI: Power Button [PWRF] [ 0.677047] isapnp: Scanning for PnP cards... [ 0.680800] hpet_acpi_add: no address or irqs in _CRS [ 0.680939] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.681099] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.681808] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.684622] brd: module loaded [ 0.685890] loop: module loaded [ 0.686113] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.686348] ata_piix 0000:00:1f.2: version 2.13 [ 0.686378] alloc irq_desc for 19 on node -1 [ 0.686384] alloc kstat_irqs on node -1 [ 0.686399] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.686410] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.841928] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.842098] scsi0 : ata_piix [ 0.842305] scsi1 : ata_piix [ 0.842408] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 [ 0.842416] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 [ 0.843338] Fixed MDIO Bus: probed [ 0.843433] PPP generic driver version 2.4.2 [ 0.843540] tun: Universal TUN/TAP device driver, 1.6 [ 0.843545] tun: (C) 1999-2004 Max Krasnyansky [ 0.843751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.843792] alloc irq_desc for 23 on node -1 [ 0.843797] alloc kstat_irqs on node -1 [ 0.843811] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.843839] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.843847] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.843937] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.843978] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.843996] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.847882] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.847913] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff05000 [ 0.861884] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.862105] usb usb1: configuration #1 chosen from 1 choice [ 0.862178] hub 1-0:1.0: USB hub found [ 0.862199] hub 1-0:1.0: 8 ports detected [ 0.862348] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.862388] uhci_hcd: USB Universal Host Controller Interface driver [ 0.862458] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.862472] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.862479] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.862575] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.862618] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 0.862850] usb usb2: configuration #1 chosen from 1 choice [ 0.862923] hub 2-0:1.0: USB hub found [ 0.862941] hub 2-0:1.0: 2 ports detected [ 0.863051] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.863065] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.863072] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.863150] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.863191] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 0.863413] usb usb3: configuration #1 chosen from 1 choice [ 0.863496] hub 3-0:1.0: USB hub found [ 0.863518] hub 3-0:1.0: 2 ports detected [ 0.863618] alloc irq_desc for 18 on node -1 [ 0.863624] alloc kstat_irqs on node -1 [ 0.863638] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.863650] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.863658] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.863738] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.863795] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 0.864009] usb usb4: configuration #1 chosen from 1 choice [ 0.864086] hub 4-0:1.0: USB hub found [ 0.864103] hub 4-0:1.0: 2 ports detected [ 0.864200] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.864213] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.864220] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.864299] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.864348] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 [ 0.864562] usb usb5: configuration #1 chosen from 1 choice [ 0.864636] hub 5-0:1.0: USB hub found [ 0.864653] hub 5-0:1.0: 2 ports detected [ 0.864883] PNP: No PS/2 controller found. Probing ports directly. [ 0.867278] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.867294] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.867495] mice: PS/2 mouse device common for all mice [ 0.867807] rtc_cmos 00:07: RTC can wake from S4 [ 0.867897] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.867937] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.868227] device-mapper: uevent: version 1.0.3 [ 0.868578] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.868917] device-mapper: multipath: version 1.1.0 loaded [ 0.868925] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.869245] EISA: Probing bus 0 at eisa.0 [ 0.869291] EISA: Detected 0 cards. [ 0.869298] cpuidle: using governor ladder [ 0.869303] cpuidle: using governor menu [ 0.870374] TCP cubic registered [ 0.870804] NET: Registered protocol family 10 [ 0.871853] lo: Disabled Privacy Extensions [ 0.872600] NET: Registered protocol family 17 [ 0.872669] Using IPI No-Shortcut mode [ 0.872884] registered taskstats version 1 [ 0.873405] rtc_cmos 00:07: setting system clock to 2015-06-08 13:47:48 UTC (1433771268) [ 0.873415] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.873420] EDD information not available. [ 1.017785] ata1.00: ATA-9: SanDisk SDSSDRC032G, 3.1.0, max UDMA/133 [ 1.017793] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 1.026281] ata1.00: configured for UDMA/133 [ 1.030087] isapnp: No Plug & Play device found [ 1.030352] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDRC0 3.1. PQ: 0 ANSI: 5 [ 1.030704] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.030754] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.030833] sd 0:0:0:0: [sda] Write Protect is off [ 1.030840] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.030911] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.031271] sda: sda1 sda2 [ 1.032494] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.074981] Freeing initrd memory: 12826k freed [ 1.085461] Freeing unused kernel memory: 620k freed [ 1.086002] Write protecting the kernel text: 4540k [ 1.086051] Write protecting the kernel read-only data: 1668k [ 1.122175] udev: starting version 151 [ 1.261565] vga16fb: initializing [ 1.261577] vga16fb: mapped to 0xc00a0000 [ 1.261748] fb0: VGA16 VGA frame buffer device [ 1.265541] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.265582] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.265654] r8169 0000:01:00.0: setting latency timer to 64 [ 1.265664] r8169 0000:01:00.0: unknown MAC, using family default [ 1.265726] alloc irq_desc for 25 on node -1 [ 1.265732] alloc kstat_irqs on node -1 [ 1.265758] r8169 0000:01:00.0: irq 25 for MSI/MSI-X [ 1.267326] eth0: RTL8101e at 0xf8096000, d0:50:99:0d:59:70, XID 00a00000 IRQ 25 [ 1.381014] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 1.417211] Console: switching to colour frame buffer device 80x30 [ 1.557284] usb 3-2: configuration #1 chosen from 1 choice [ 1.583586] usbcore: registered new interface driver hiddev [ 1.597609] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 [ 1.597896] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 1.597964] usbcore: registered new interface driver usbhid [ 1.597973] usbhid: v2.6:USB HID core driver [ 1.771355] xor: automatically using best checksumming function: pIII_sse [ 1.790355] pIII_sse : 5726.000 MB/sec [ 1.790361] xor: using function: pIII_sse (5726.000 MB/sec) [ 1.796376] device-mapper: dm-raid45: initialized v0.2594b [ 6.835243] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 6.835253] EXT4-fs (sda1): write access will be enabled during recovery [ 6.867766] EXT4-fs (sda1): recovery complete [ 6.868057] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.406780] udev: starting version 151 [ 7.517873] lp: driver loaded but no devices found [ 7.657759] parport_pc 00:09: reported by Plug and Play ACPI [ 7.657836] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 7.737170] lp0: using parport0 (interrupt-driven). [ 7.737604] alloc irq_desc for 21 on node -1 [ 7.737611] alloc kstat_irqs on node -1 [ 7.737629] parport_pc 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 7.737639] PCI parallel port detected: 1409:7268, I/O at 0xd010(0xd000), IRQ 21 [ 7.737703] parport1: PC-style at 0xd010 (0xd000), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 7.833003] lp1: using parport1 (interrupt-driven). [ 7.909320] ppdev: user-space parallel port driver [ 7.939473] type=1505 audit(1433764075.574:2): operation="profile_load" pid=702 name="/sbin/dhclient3" [ 7.940191] type=1505 audit(1433764075.574:3): operation="profile_load" pid=702 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.940659] type=1505 audit(1433764075.578:4): operation="profile_load" pid=702 name="/usr/lib/connman/scripts/dhclient-script" [ 8.128673] r8169: eth0: link down [ 8.129277] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.146262] alloc irq_desc for 22 on node -1 [ 8.146271] alloc kstat_irqs on node -1 [ 8.146289] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.146449] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.233768] type=1505 audit(1433764075.870:5): operation="profile_load" pid=810 name="/usr/share/gdm/guest-session/Xsession" [ 8.235441] type=1505 audit(1433764075.870:6): operation="profile_replace" pid=811 name="/sbin/dhclient3" [ 8.236539] type=1505 audit(1433764075.874:7): operation="profile_replace" pid=811 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.237069] type=1505 audit(1433764075.874:8): operation="profile_replace" pid=811 name="/usr/lib/connman/scripts/dhclient-script" [ 8.245003] type=1505 audit(1433764075.882:9): operation="profile_load" pid=815 name="/usr/sbin/tcpdump" [ 8.262092] type=1505 audit(1433764075.898:10): operation="profile_load" pid=812 name="/usr/bin/evince" [ 8.262840] type=1505 audit(1433764075.898:11): operation="profile_load" pid=814 name="/usr/lib/cups/backend/cups-pdf" [ 8.826067] CPU0 attaching NULL sched-domain. [ 8.826078] CPU1 attaching NULL sched-domain. [ 8.826083] CPU2 attaching NULL sched-domain. [ 8.826088] CPU3 attaching NULL sched-domain. [ 8.859542] CPU0 attaching sched-domain: [ 8.859549] domain 0: span 0-1 level SIBLING [ 8.859555] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 8.859568] domain 1: span 0-1 level MC [ 8.859573] groups: 0-1 (cpu_power = 1178) [ 8.859582] domain 2: span 0-3 level CPU [ 8.859587] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 8.859600] CPU1 attaching sched-domain: [ 8.859605] domain 0: span 0-1 level SIBLING [ 8.859609] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 8.859620] domain 1: span 0-1 level MC [ 8.859625] groups: 0-1 (cpu_power = 1178) [ 8.859634] domain 2: span 0-3 level CPU [ 8.859638] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 8.859651] CPU2 attaching sched-domain: [ 8.859655] domain 0: span 2-3 level SIBLING [ 8.859660] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 8.859753] domain 1: span 2-3 level MC [ 8.859758] groups: 2-3 (cpu_power = 1178) [ 8.859766] domain 2: span 0-3 level CPU [ 8.859771] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 8.859783] CPU3 attaching sched-domain: [ 8.859788] domain 0: span 2-3 level SIBLING [ 8.859792] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 8.859803] domain 1: span 2-3 level MC [ 8.859808] groups: 2-3 (cpu_power = 1178) [ 8.859816] domain 2: span 0-3 level CPU [ 8.859821] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 10.786151] CPU0 attaching NULL sched-domain. [ 10.786165] CPU1 attaching NULL sched-domain. [ 10.786172] CPU2 attaching NULL sched-domain. [ 10.786179] CPU3 attaching NULL sched-domain. [ 10.819903] CPU0 attaching sched-domain: [ 10.819913] domain 0: span 0-1 level SIBLING [ 10.819922] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 10.819936] domain 1: span 0-1 level MC [ 10.819941] groups: 0-1 (cpu_power = 1178) [ 10.819950] domain 2: span 0-3 level CPU [ 10.819956] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 10.819973] CPU1 attaching sched-domain: [ 10.819979] domain 0: span 0-1 level SIBLING [ 10.819986] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 10.820002] domain 1: span 0-1 level MC [ 10.820009] groups: 0-1 (cpu_power = 1178) [ 10.820021] domain 2: span 0-3 level CPU [ 10.820028] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 10.820045] CPU2 attaching sched-domain: [ 10.820051] domain 0: span 2-3 level SIBLING [ 10.820057] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 10.820071] domain 1: span 2-3 level MC [ 10.820078] groups: 2-3 (cpu_power = 1178) [ 10.820089] domain 2: span 0-3 level CPU [ 10.820096] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 10.820115] CPU3 attaching sched-domain: [ 10.820120] domain 0: span 2-3 level SIBLING [ 10.820126] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 10.820142] domain 1: span 2-3 level MC [ 10.820149] groups: 2-3 (cpu_power = 1178) [ 10.820162] domain 2: span 0-3 level CPU [ 10.820169] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 29.514018] I-pipe: Domain RTAI registered. [ 29.514037] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 29.514043] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 29.514214] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 29.514224] PIPELINE layers: [ 29.514235] f9219e20 9ac15d93 RTAI 200 [ 29.514244] c085cb20 0 Linux 100 [ 29.557571] RTAI[malloc]: global heap size = 2097152 bytes, . [ 29.558401] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 29.558413] RTAI[sched]: hard timer type/freq = APIC/8312420(Hz); default timing: periodic; linear timed lists. [ 29.558420] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1862205000 hz. [ 29.558425] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 29.558538] RTAI[usi]: enabled. [ 29.631565] RTAI[math]: loaded. [ 29.775323] config string '0x378 out 0xd010 in ' [ 29.826286] limite asse X [ 29.826294] limite asse Y [ 29.826298] limite asse Z [ 29.826302] limite asse A [ 29.826306] rifare gli zeri [ 29.826311] rifare gli zeri [ 32.488890] rifare gli zeri [ 112.167517] limite asse Z [ 165.367795] limite asse X [ 180.461249] limite asse Y [ 188.455052] limite asse A [ 2516.320030] rifare gli zeri [ 2588.898055] limite asse Z [ 2605.166201] limite asse X [ 2623.567847] limite asse Y [ 2634.753196] limite asse A [ 4496.236637] rifare gli zeri [ 4533.849478] limite asse Z [ 4587.136566] limite asse X [ 4602.203069] limite asse Y [ 4610.179900] limite asse A [ 7076.713131] rifare gli zeri [ 7127.308637] limite asse Z [ 7180.612696] limite asse X [ 7195.690163] limite asse Y [ 7203.677996] limite asse A [10274.948606] rifare gli zeri [10425.560578] limite asse Z [10478.816733] limite asse X [10493.891207] limite asse Y [10501.878067] limite asse A [17114.448381] rifare gli zeri [17654.765203] usb 3-2: USB disconnect, address 2 [17658.307358] usb 3-2: new low speed USB device using uhci_hcd and address 3 [17658.485224] usb 3-2: configuration #1 chosen from 1 choice [17658.501481] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5 [17658.501723] generic-usb 0003:1C4F:0002.0002: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.1-2/input0 [17658.525186] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6 [17658.525421] generic-usb 0003:1C4F:0002.0003: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.1-2/input1 k1@k1-desktop:~$