[ 0.607505] NetLabel: domain hash size = 128 [ 0.607505] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.607512] NetLabel: unlabeled traffic allowed by default [ 0.607528] Switching to clocksource tsc [ 0.608662] AppArmor: AppArmor Filesystem Enabled [ 0.608667] pnp: PnP ACPI init [ 0.608673] ACPI: bus type pnp registered [ 0.612474] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.I2C0.ACD0._CRS] (Node f701d900), AE_AML_INVALID_RESOURCE_TYPE [ 0.612516] ACPI Error (uteval-0250): Method execution failed [\_SB_.PCI0.I2C0.ACD0._CRS] (Node f701d900), AE_AML_INVALID_RESOURCE_TYPE [ 0.612522] pnp 00:0d: can't evaluate _CRS: 12311 [ 0.614977] pnp: PnP ACPI: found 15 devices [ 0.614979] ACPI: ACPI bus type pnp unregistered [ 0.614981] PnPBIOS: Disabled by ACPI PNP [ 0.614986] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.614990] system 00:06: ioport range 0x800-0x87f has been reserved [ 0.614993] system 00:08: ioport range 0x1854-0x1857 has been reserved [ 0.614995] system 00:09: ioport range 0xa00-0xa0f has been reserved [ 0.614996] system 00:09: ioport range 0xa30-0xa3f has been reserved [ 0.614997] system 00:09: ioport range 0xa20-0xa2f has been reserved [ 0.615000] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved [ 0.615003] system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.615004] system 00:0e: iomem range 0xfed10000-0xfed17fff has been reserved [ 0.615005] system 00:0e: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.615007] system 00:0e: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.615008] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.615009] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.615011] system 00:0e: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.615012] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.615013] system 00:0e: iomem range 0xff000000-0xffffffff has been reserved [ 0.615015] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.615016] system 00:0e: iomem range 0xf7fe0000-0xf7feffff has been reserved [ 0.649597] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.649598] pci 0000:00:1c.0: IO window: disabled [ 0.649601] pci 0000:00:1c.0: MEM window: disabled [ 0.649604] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.649608] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 [ 0.649610] pci 0000:00:1c.2: IO window: 0xe000-0xefff [ 0.649613] pci 0000:00:1c.2: MEM window: 0xf7d00000-0xf7dfffff [ 0.649616] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f00fffff [ 0.649620] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.649621] pci 0000:03:00.0: IO window: disabled [ 0.649628] pci 0000:03:00.0: MEM window: 0xf7c00000-0xf7cfffff [ 0.649633] pci 0000:03:00.0: PREFETCH window: disabled [ 0.649642] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.649642] pci 0000:00:1c.3: IO window: disabled [ 0.649646] pci 0000:00:1c.3: MEM window: 0xf7c00000-0xf7cfffff [ 0.649648] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.649660] alloc irq_desc for 16 on node -1 [ 0.649661] alloc kstat_irqs on node -1 [ 0.649664] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.649667] pci 0000:00:1c.0: setting latency timer to 64 [ 0.649673] alloc irq_desc for 18 on node -1 [ 0.649673] alloc kstat_irqs on node -1 [ 0.649675] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.649678] pci 0000:00:1c.2: setting latency timer to 64 [ 0.649683] alloc irq_desc for 19 on node -1 [ 0.649684] alloc kstat_irqs on node -1 [ 0.649685] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.649688] pci 0000:00:1c.3: setting latency timer to 64 [ 0.649698] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.649703] pci 0000:03:00.0: setting latency timer to 64 [ 0.649707] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.649708] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.649709] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.649711] pci_bus 0000:02: resource 1 mem: [0xf7d00000-0xf7dfffff] [ 0.649712] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf00fffff] [ 0.649713] pci_bus 0000:03: resource 1 mem: [0xf7c00000-0xf7cfffff] [ 0.649714] pci_bus 0000:04: resource 1 mem: [0xf7c00000-0xf7cfffff] [ 0.649715] pci_bus 0000:04: resource 4 mem: [0xf7c00000-0xf7cfffff] [ 0.649733] NET: Registered protocol family 2 [ 0.649774] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.649879] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.650059] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.650149] TCP: Hash tables configured (established 131072 bind 65536) [ 0.650150] TCP reno registered [ 0.650180] NET: Registered protocol family 1 [ 0.650186] pci 0000:00:02.0: Boot video device [ 0.685110] Scanning for low memory corruption every 60 seconds [ 0.685154] audit: initializing netlink socket (disabled) [ 0.685161] type=2000 audit(1479928074.505:1): initialized [ 0.689082] highmem bounce pool size: 64 pages [ 0.689085] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.689724] VFS: Disk quotas dquot_6.5.2 [ 0.689748] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.689987] fuse init (API version 7.13) [ 0.690025] msgmni has been set to 1643 [ 0.690131] alg: No test for stdrng (krng) [ 0.690157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.690158] io scheduler noop registered [ 0.690159] io scheduler anticipatory registered [ 0.690160] io scheduler deadline registered [ 0.690177] io scheduler cfq registered (default) [ 0.690250] alloc irq_desc for 24 on node -1 [ 0.690251] alloc kstat_irqs on node -1 [ 0.690257] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.690263] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.690332] alloc irq_desc for 25 on node -1 [ 0.690333] alloc kstat_irqs on node -1 [ 0.690338] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X [ 0.690343] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.690410] alloc irq_desc for 26 on node -1 [ 0.690411] alloc kstat_irqs on node -1 [ 0.690415] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.690421] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.690460] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.690470] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.690516] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.690520] ACPI: Power Button [PWRB] [ 0.690539] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.690540] ACPI: Sleep Button [SLPB] [ 0.690558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.690559] ACPI: Power Button [PWRF] [ 0.690586] isapnp: Scanning for PnP cards... [ 0.691386] hpet_acpi_add: no address or irqs in _CRS [ 0.691425] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.691510] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.691785] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.692396] brd: module loaded [ 0.692669] loop: module loaded [ 0.692713] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.692943] Fixed MDIO Bus: probed [ 0.692963] PPP generic driver version 2.4.2 [ 0.692980] tun: Universal TUN/TAP device driver, 1.6 [ 0.692981] tun: (C) 1999-2004 Max Krasnyansky [ 0.693020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.693034] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.693041] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.693044] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.693060] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.693077] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.696959] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 0.696977] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7e1b000 [ 0.705620] Freeing initrd memory: 12843k freed [ 0.712930] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.713013] usb usb1: configuration #1 chosen from 1 choice [ 0.713031] hub 1-0:1.0: USB hub found [ 0.713036] hub 1-0:1.0: 2 ports detected [ 0.713073] alloc irq_desc for 23 on node -1 [ 0.713074] alloc kstat_irqs on node -1 [ 0.713078] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.713091] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.713093] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.713116] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.713133] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.717002] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 0.717014] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7e1a000 [ 0.732917] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.732958] usb usb2: configuration #1 chosen from 1 choice [ 0.732973] hub 2-0:1.0: USB hub found [ 0.732976] hub 2-0:1.0: 2 ports detected [ 0.733005] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.733015] uhci_hcd: USB Universal Host Controller Interface driver [ 0.733075] PNP: No PS/2 controller found. Probing ports directly. [ 0.733441] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.733445] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.733491] mice: PS/2 mouse device common for all mice [ 0.733568] rtc_cmos 00:07: RTC can wake from S4 [ 0.733591] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.733611] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.733675] device-mapper: uevent: version 1.0.3 [ 0.733741] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.733795] device-mapper: multipath: version 1.1.0 loaded [ 0.733797] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.733858] EISA: Probing bus 0 at eisa.0 [ 0.733862] Cannot allocate resource for EISA slot 1 [ 0.733875] EISA: Detected 0 cards. [ 0.733876] cpuidle: using governor ladder [ 0.733877] cpuidle: using governor menu [ 0.734113] TCP cubic registered [ 0.734205] NET: Registered protocol family 10 [ 0.734431] lo: Disabled Privacy Extensions [ 0.734588] NET: Registered protocol family 17 [ 0.734601] Using IPI No-Shortcut mode [ 0.734641] registered taskstats version 1 [ 0.734925] rtc_cmos 00:07: setting system clock to 2016-11-23 19:07:54 UTC (1479928074) [ 0.734927] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.734928] EDD information not available. [ 1.024829] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.042801] isapnp: No Plug & Play device found [ 1.042809] Freeing unused kernel memory: 620k freed [ 1.042900] Write protecting the kernel text: 4540k [ 1.042913] Write protecting the kernel read-only data: 1668k [ 1.050910] udev: starting version 151 [ 1.071871] vga16fb: initializing [ 1.071874] vga16fb: mapped to 0xc00a0000 [ 1.071912] fb0: VGA16 VGA frame buffer device [ 1.072005] ahci 0000:00:1f.2: version 3.0 [ 1.072139] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.072169] alloc irq_desc for 27 on node -1 [ 1.072170] alloc kstat_irqs on node -1 [ 1.072178] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.072222] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 1.072224] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 1.072228] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.107040] scsi0 : ahci [ 1.107750] scsi1 : ahci [ 1.108477] scsi2 : ahci [ 1.108518] scsi3 : ahci [ 1.108553] scsi4 : ahci [ 1.108586] scsi5 : ahci [ 1.109230] ata1: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19100 irq 27 [ 1.109232] ata2: DUMMY [ 1.109233] ata3: DUMMY [ 1.109234] ata4: DUMMY [ 1.109235] ata5: DUMMY [ 1.109235] ata6: DUMMY [ 1.157270] usb 1-1: configuration #1 chosen from 1 choice [ 1.157384] hub 1-1:1.0: USB hub found [ 1.157484] hub 1-1:1.0: 6 ports detected [ 1.164252] Console: switching to colour frame buffer device 80x30 [ 1.268746] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.401053] usb 2-1: configuration #1 chosen from 1 choice [ 1.401168] hub 2-1:1.0: USB hub found [ 1.401270] hub 2-1:1.0: 8 ports detected [ 1.428702] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.429073] ata1.00: ACPI _SDD failed (AE 0x5) [ 1.675550] usb 2-1.5: new low speed USB device using ehci_hcd and address 3 [ 1.773168] usb 2-1.5: configuration #1 chosen from 1 choice [ 1.777864] usbcore: registered new interface driver hiddev [ 1.780206] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4 [ 1.780246] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.5/input0 [ 1.783793] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input5 [ 1.783825] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.5/input1 [ 1.783835] usbcore: registered new interface driver usbhid [ 1.783836] usbhid: v2.6:USB HID core driver [ 1.843492] usb 2-1.6: new low speed USB device using ehci_hcd and address 4 [ 1.939741] usb 2-1.6: configuration #1 chosen from 1 choice [ 1.941643] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6 [ 1.941692] generic-usb 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0 [ 6.750764] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.750848] ata1.00: ACPI _SDD failed (AE 0x5) [ 6.750849] ata1.00: ACPI: failed the second time, disabled [ 6.751181] ata1.00: ATA-9: SanDisk SDSSDRC032G, 3.1.0, max UDMA/133 [ 6.751183] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 6.751528] ata1.00: configured for UDMA/133 [ 6.751584] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDRC0 3.1. PQ: 0 ANSI: 5 [ 6.751660] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.751735] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 6.751757] sd 0:0:0:0: [sda] Write Protect is off [ 6.751758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.751767] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.751822] sda: sda1 sda2 < sda5 > [ 6.752609] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.850064] xor: automatically using best checksumming function: pIII_sse [ 6.867715] pIII_sse : 18969.000 MB/sec [ 6.867716] xor: using function: pIII_sse (18969.000 MB/sec) [ 6.868795] device-mapper: dm-raid45: initialized v0.2594b [ 6.884248] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.170504] Adding 1332216k swap on /dev/sda5. Priority:-1 extents:1 across:1332216k SS [ 7.181624] udev: starting version 151 [ 7.217727] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 7.217737] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.217760] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 7.217762] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 7.217967] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 7.218037] xhci_hcd 0000:00:14.0: cache line size of 32 is not supported [ 7.218043] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7e00000 [ 7.218069] usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor [ 7.218133] usb usb3: configuration #1 chosen from 1 choice [ 7.218136] xHCI xhci_add_endpoint called for root hub [ 7.218137] xHCI xhci_check_bandwidth called for root hub [ 7.218158] hub 3-0:1.0: USB hub found [ 7.218163] hub 3-0:1.0: 21 ports detected [ 7.227565] lp: driver loaded but no devices found [ 7.243014] r8168 Gigabit Ethernet driver 8.041.01-NAPI loaded [ 7.243032] r8168 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.243052] r8168 0000:02:00.0: setting latency timer to 64 [ 7.243112] alloc irq_desc for 28 on node -1 [ 7.243114] alloc kstat_irqs on node -1 [ 7.243126] r8168 0000:02:00.0: irq 28 for MSI/MSI-X [ 7.266867] parport_pc 00:0b: reported by Plug and Play ACPI [ 7.266913] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 7.296500] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 7.296505] r8168 Copyright (C) 2015 Realtek NIC software team [ 7.296506] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 7.296507] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 7.298418] ppdev: user-space parallel port driver [ 7.300475] udev: renamed network interface eth0 to eth3 [ 7.317706] type=1505 audit(1479928081.081:2): operation="profile_load" pid=874 name="/sbin/dhclient3" [ 7.317910] type=1505 audit(1479928081.081:3): operation="profile_replace" pid=930 name="/sbin/dhclient3" [ 7.318054] type=1505 audit(1479928081.081:4): operation="profile_load" pid=874 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.318241] type=1505 audit(1479928081.081:5): operation="profile_load" pid=874 name="/usr/lib/connman/scripts/dhclient-script" [ 7.318341] type=1505 audit(1479928081.081:6): operation="profile_replace" pid=930 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.318540] type=1505 audit(1479928081.081:7): operation="profile_replace" pid=930 name="/usr/lib/connman/scripts/dhclient-script" [ 7.352639] type=1505 audit(1479928081.117:8): operation="profile_load" pid=1025 name="/usr/share/gdm/guest-session/Xsession" [ 7.352741] type=1505 audit(1479928081.117:9): operation="profile_replace" pid=1026 name="/sbin/dhclient3" [ 7.353151] type=1505 audit(1479928081.117:10): operation="profile_replace" pid=1026 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.353692] type=1505 audit(1479928081.117:11): operation="profile_replace" pid=1026 name="/usr/lib/connman/scripts/dhclient-script" [ 7.355949] lp0: using parport0 (interrupt-driven). [ 7.361537] eth3: 0xf80d0000, 40:8d:5c:41:e1:33, IRQ 28 [ 7.411581] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 7.602410] CPU0 attaching NULL sched-domain. [ 7.602413] CPU1 attaching NULL sched-domain. [ 7.602414] CPU2 attaching NULL sched-domain. [ 7.602416] CPU3 attaching NULL sched-domain. [ 7.627578] CPU0 attaching sched-domain: [ 7.627580] domain 0: span 0,2 level SIBLING [ 7.627581] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 7.627584] domain 1: span 0-3 level MC [ 7.627586] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 7.627589] CPU1 attaching sched-domain: [ 7.627590] domain 0: span 1,3 level SIBLING [ 7.627591] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 7.627594] domain 1: span 0-3 level MC [ 7.627595] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 7.627599] CPU2 attaching sched-domain: [ 7.627599] domain 0: span 0,2 level SIBLING [ 7.627601] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 7.627603] domain 1: span 0-3 level MC [ 7.627604] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 7.627607] CPU3 attaching sched-domain: [ 7.627608] domain 0: span 1,3 level SIBLING [ 7.627609] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 7.627612] domain 1: span 0-3 level MC [ 7.627613] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 8.464076] I-pipe: Domain RTAI registered. [ 8.464080] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 8.464082] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 8.464127] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 8.464128] PIPELINE layers: [ 8.464130] f82dce20 9ac15d93 RTAI 200 [ 8.464131] c085cb20 0 Linux 100 [ 8.472886] RTAI[malloc]: global heap size = 2097152 bytes, . [ 8.473073] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 8.473075] RTAI[sched]: hard timer type/freq = APIC/6235530(Hz); default timing: periodic; linear timed lists. [ 8.473077] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3592154000 hz. [ 8.473078] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 8.473109] RTAI[usi]: enabled. [ 8.485318] RTAI[math]: loaded. [ 8.531657] hm2: loading Mesa HostMot2 driver version 0.15 [ 8.533054] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 8.533072] hm2_pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8.533074] hm2_pci: discovered 5i25 at 0000:04:00.0 [ 8.533627] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 8.590604] Board hm2_5i25.0.7i77.0.0 Hardware Mode 0 = standard [ 8.593608] Board hm2_5i25.0.7i77.0.0 Software Mode 0 = input_output [ 8.596293] Board hm2_5i25.0.7i77.0.0 Software Mode 1 = io_analog [ 8.600771] Board hm2_5i25.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage [ 8.606356] Board hm2_5i25.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage [ 8.708381] Board hm2_5i25.0.7i77.0.1 Hardware Mode 0 = standard [ 8.711031] Board hm2_5i25.0.7i77.0.1 Software Mode 0 = analogout_enables [ 8.810736] hm2/hm2_5i25.0: 34 I/O Pins used: [ 8.810738] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort [ 8.810739] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort [ 8.810740] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort [ 8.810742] hm2/hm2_5i25.0: IO Pin 003 (P3-15): Smart Serial Interface #0, pin TxData1 (Output) [ 8.810743] hm2/hm2_5i25.0: IO Pin 004 (P3-03): Smart Serial Interface #0, pin RxData1 (Input) [ 8.810744] hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output) [ 8.810746] hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input) [ 8.810747] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) [ 8.810749] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) [ 8.810750] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) [ 8.810751] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) [ 8.810753] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) [ 8.810754] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) [ 8.810755] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) [ 8.810757] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input) [ 8.810758] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input) [ 8.810759] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input) [ 8.810760] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 8.810761] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 8.810762] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 8.810763] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 8.810764] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 8.810765] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 8.810766] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 8.810767] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 8.810768] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 8.810769] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 8.810770] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 8.810771] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 8.810772] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 8.810773] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 8.810774] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 8.810775] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 8.810776] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 8.810818] hm2/hm2_5i25.0: registered [ 8.810819] hm2_5i25.0: initialized AnyIO board at 0000:04:00.0 [ 9.424367] r8168: eth3: link up [ 9.424729] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 9.430250] hm2_5i25.0: dropping AnyIO board at 0000:04:00.0 [ 9.430253] hm2/hm2_5i25.0: unregistered [ 9.430264] hm2_pci 0000:04:00.0: PCI INT A disabled [ 9.430273] hm2_pci: driver unloaded [ 9.431060] hm2: unloading [ 11.483535] RTAI[math]: unloaded. [ 11.491910] SCHED releases registered named ALIEN RTGLBH [ 11.561267] RTAI[malloc]: unloaded. [ 11.657124] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 11.658092] I-pipe: Domain RTAI unregistered. [ 11.658152] RTAI[hal]: unmounted. [ 20.139156] eth3: no IPv6 routers present [ 31.445665] CPU0 attaching NULL sched-domain. [ 31.445669] CPU1 attaching NULL sched-domain. [ 31.445671] CPU2 attaching NULL sched-domain. [ 31.445673] CPU3 attaching NULL sched-domain. [ 31.478100] CPU0 attaching sched-domain: [ 31.478104] domain 0: span 0,2 level SIBLING [ 31.478106] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 31.478111] domain 1: span 0-3 level MC [ 31.478113] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 31.478119] CPU1 attaching sched-domain: [ 31.478121] domain 0: span 1,3 level SIBLING [ 31.478123] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 31.478127] domain 1: span 0-3 level MC [ 31.478129] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 31.478134] CPU2 attaching sched-domain: [ 31.478135] domain 0: span 0,2 level SIBLING [ 31.478137] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 31.478141] domain 1: span 0-3 level MC [ 31.478143] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 31.478148] CPU3 attaching sched-domain: [ 31.478149] domain 0: span 1,3 level SIBLING [ 31.478151] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 31.478155] domain 1: span 0-3 level MC [ 31.478157] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 39.228498] I-pipe: Domain RTAI registered. [ 39.228502] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 39.228504] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 39.228550] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 39.228551] PIPELINE layers: [ 39.228553] f82dce20 9ac15d93 RTAI 200 [ 39.228555] c085cb20 0 Linux 100 [ 39.235828] RTAI[malloc]: global heap size = 2097152 bytes, . [ 39.236037] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 39.236040] RTAI[sched]: hard timer type/freq = APIC/6235530(Hz); default timing: periodic; linear timed lists. [ 39.236041] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3592154000 hz. [ 39.236042] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 39.236074] RTAI[usi]: enabled. [ 39.253122] RTAI[math]: loaded. [ 39.285616] hm2: loading Mesa HostMot2 driver version 0.15 [ 39.286639] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 39.286662] hm2_pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 39.286664] hm2_pci: discovered 5i25 at 0000:04:00.0 [ 39.287212] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 39.344442] Board hm2_5i25.0.7i77.0.0 Hardware Mode 0 = standard [ 39.347393] Board hm2_5i25.0.7i77.0.0 Software Mode 0 = input_output [ 39.349974] Board hm2_5i25.0.7i77.0.0 Software Mode 1 = io_analog [ 39.354556] Board hm2_5i25.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage [ 39.360349] Board hm2_5i25.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage [ 39.461397] Board hm2_5i25.0.7i77.0.1 Hardware Mode 0 = standard [ 39.464048] Board hm2_5i25.0.7i77.0.1 Software Mode 0 = analogout_enables [ 39.563720] hm2/hm2_5i25.0: 34 I/O Pins used: [ 39.563722] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort [ 39.563723] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort [ 39.563724] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort [ 39.563726] hm2/hm2_5i25.0: IO Pin 003 (P3-15): Smart Serial Interface #0, pin TxData1 (Output) [ 39.563728] hm2/hm2_5i25.0: IO Pin 004 (P3-03): Smart Serial Interface #0, pin RxData1 (Input) [ 39.563729] hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output) [ 39.563730] hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input) [ 39.563732] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) [ 39.563733] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) [ 39.563734] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) [ 39.563736] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) [ 39.563737] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) [ 39.563738] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) [ 39.563740] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) [ 39.563741] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input) [ 39.563742] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input) [ 39.563744] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input) [ 39.563745] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 39.563746] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 39.563747] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 39.563748] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 39.563749] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 39.563750] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 39.563751] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 39.563752] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 39.563753] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 39.563754] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 39.563755] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 39.563756] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 39.563757] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 39.563758] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 39.563759] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 39.563760] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 39.563761] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 39.563804] hm2/hm2_5i25.0: registered [ 39.563805] hm2_5i25.0: initialized AnyIO board at 0000:04:00.0 [ 39.889658] __ratelimit: 19 callbacks suppressed [ 39.889661] milltask[2202]: segfault at 0 ip 080860b3 sp bf946ad0 error 4 in milltask[8048000+5d000] [ 40.065028] hm2_5i25.0: dropping AnyIO board at 0000:04:00.0 [ 40.065031] hm2/hm2_5i25.0: unregistered [ 40.065043] hm2_pci 0000:04:00.0: PCI INT A disabled [ 40.065052] hm2_pci: driver unloaded [ 40.065858] hm2: unloading [ 42.127885] RTAI[math]: unloaded. [ 42.136330] SCHED releases registered named ALIEN RTGLBH [ 42.202713] RTAI[malloc]: unloaded. [ 42.302057] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 42.303120] I-pipe: Domain RTAI unregistered. [ 42.303179] RTAI[hal]: unmounted. [ 1777.686316] usb 2-1.4: new high speed USB device using ehci_hcd and address 5 [ 1777.783086] usb 2-1.4: configuration #1 chosen from 1 choice [ 1777.788524] Initializing USB Mass Storage driver... [ 1777.788600] scsi6 : SCSI emulation for USB Mass Storage devices [ 1777.788675] usb-storage: device found at 5 [ 1777.788677] usb-storage: waiting for device to settle before scanning [ 1777.788682] usbcore: registered new interface driver usb-storage [ 1777.788703] USB Mass Storage support registered. [ 1782.785113] usb-storage: device scan complete [ 1782.853208] scsi 6:0:0:0: Direct-Access TDK LoR TF10 PMAP PQ: 0 ANSI: 6 [ 1782.853399] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 1783.682652] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1783.683647] sd 6:0:0:0: [sdb] Write Protect is off [ 1783.683649] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1783.683650] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1783.686772] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1783.686773] sdb: sdb1 [ 1783.709515] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1783.709517] sd 6:0:0:0: [sdb] Attached SCSI removable disk k1-stab@k1-stab-desktop:~$