[ 0.680698] ACPI: Sleep Button [SLPB] [ 0.680788] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.680793] ACPI: Power Button [PWRF] [ 0.680979] isapnp: Scanning for PnP cards... [ 0.684710] hpet_acpi_add: no address or irqs in _CRS [ 0.684843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.685003] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.685713] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.688522] brd: module loaded [ 0.689797] loop: module loaded [ 0.690020] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.690250] ata_piix 0000:00:1f.2: version 2.13 [ 0.690284] alloc irq_desc for 19 on node -1 [ 0.690290] alloc kstat_irqs on node -1 [ 0.690306] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.690318] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.845921] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.846093] scsi0 : ata_piix [ 0.846312] scsi1 : ata_piix [ 0.846416] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 [ 0.846425] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 [ 0.847347] Fixed MDIO Bus: probed [ 0.847444] PPP generic driver version 2.4.2 [ 0.847551] tun: Universal TUN/TAP device driver, 1.6 [ 0.847556] tun: (C) 1999-2004 Max Krasnyansky [ 0.847764] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.847803] alloc irq_desc for 23 on node -1 [ 0.847809] alloc kstat_irqs on node -1 [ 0.847824] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.847854] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.847862] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.847956] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.847997] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.848016] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.851901] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.851930] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff05000 [ 0.865872] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.866094] usb usb1: configuration #1 chosen from 1 choice [ 0.866171] hub 1-0:1.0: USB hub found [ 0.866191] hub 1-0:1.0: 8 ports detected [ 0.866341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.866379] uhci_hcd: USB Universal Host Controller Interface driver [ 0.866444] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.866459] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.866467] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.866562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.866604] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 0.866836] usb usb2: configuration #1 chosen from 1 choice [ 0.866905] hub 2-0:1.0: USB hub found [ 0.866923] hub 2-0:1.0: 2 ports detected [ 0.867026] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.867042] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.867050] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.867132] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.867169] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 0.867389] usb usb3: configuration #1 chosen from 1 choice [ 0.867472] hub 3-0:1.0: USB hub found [ 0.867489] hub 3-0:1.0: 2 ports detected [ 0.867587] alloc irq_desc for 18 on node -1 [ 0.867593] alloc kstat_irqs on node -1 [ 0.867606] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.867619] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.867628] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.867709] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.867766] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 0.867983] usb usb4: configuration #1 chosen from 1 choice [ 0.868061] hub 4-0:1.0: USB hub found [ 0.868077] hub 4-0:1.0: 2 ports detected [ 0.868173] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.868185] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.868193] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.868270] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.868319] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 [ 0.868529] usb usb5: configuration #1 chosen from 1 choice [ 0.868601] hub 5-0:1.0: USB hub found [ 0.868618] hub 5-0:1.0: 2 ports detected [ 0.868843] PNP: No PS/2 controller found. Probing ports directly. [ 0.871438] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.871455] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.871657] mice: PS/2 mouse device common for all mice [ 0.871976] rtc_cmos 00:07: RTC can wake from S4 [ 0.872066] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.872105] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.872388] device-mapper: uevent: version 1.0.3 [ 0.872740] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.873082] device-mapper: multipath: version 1.1.0 loaded [ 0.873090] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.873414] EISA: Probing bus 0 at eisa.0 [ 0.873462] EISA: Detected 0 cards. [ 0.873468] cpuidle: using governor ladder [ 0.873474] cpuidle: using governor menu [ 0.874550] TCP cubic registered [ 0.874983] NET: Registered protocol family 10 [ 0.876036] lo: Disabled Privacy Extensions [ 0.876781] NET: Registered protocol family 17 [ 0.876846] Using IPI No-Shortcut mode [ 0.877058] registered taskstats version 1 [ 0.877574] rtc_cmos 00:07: setting system clock to 2015-10-16 16:39:51 UTC (1445013591) [ 0.877582] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.877587] EDD information not available. [ 1.021772] ata1.00: ATA-9: SanDisk SDSSDRC032G, 3.1.0, max UDMA/133 [ 1.021781] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 1.030259] ata1.00: configured for UDMA/133 [ 1.033976] isapnp: No Plug & Play device found [ 1.034253] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDRC0 3.1. PQ: 0 ANSI: 5 [ 1.034615] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.034659] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.034742] sd 0:0:0:0: [sda] Write Protect is off [ 1.034749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.034823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.035184] sda: sda1 sda2 [ 1.036573] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.078395] Freeing initrd memory: 12826k freed [ 1.088871] Freeing unused kernel memory: 620k freed [ 1.089315] Write protecting the kernel text: 4540k [ 1.089363] Write protecting the kernel read-only data: 1668k [ 1.125779] udev: starting version 151 [ 1.249080] vga16fb: initializing [ 1.249090] vga16fb: mapped to 0xc00a0000 [ 1.249274] fb0: VGA16 VGA frame buffer device [ 1.278867] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.278908] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.278986] r8169 0000:01:00.0: setting latency timer to 64 [ 1.278998] r8169 0000:01:00.0: unknown MAC, using family default [ 1.279062] alloc irq_desc for 25 on node -1 [ 1.279068] alloc kstat_irqs on node -1 [ 1.279098] r8169 0000:01:00.0: irq 25 for MSI/MSI-X [ 1.280736] eth0: RTL8101e at 0xf8096000, d0:50:99:41:bc:17, XID 00a00000 IRQ 25 [ 1.413025] Console: switching to colour frame buffer device 80x30 [ 1.440904] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.617582] usb 2-1: configuration #1 chosen from 1 choice [ 1.643735] usbcore: registered new interface driver hiddev [ 1.655788] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 1.656178] generic-usb 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 1.656233] usbcore: registered new interface driver usbhid [ 1.656424] usbhid: v2.6:USB HID core driver [ 1.781687] xor: automatically using best checksumming function: pIII_sse [ 1.797993] pIII_sse : 5734.000 MB/sec [ 1.797998] xor: using function: pIII_sse (5734.000 MB/sec) [ 1.803962] device-mapper: dm-raid45: initialized v0.2594b [ 1.861419] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 2.038832] usb 2-2: configuration #1 chosen from 1 choice [ 2.055064] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 [ 2.055220] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-2/input0 [ 2.077822] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input6 [ 2.078036] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-2/input1 [ 6.841859] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 6.841869] EXT4-fs (sda1): write access will be enabled during recovery [ 7.630152] EXT4-fs (sda1): orphan cleanup on readonly fs [ 7.630168] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 820753 [ 7.630292] EXT4-fs (sda1): 1 orphan inode deleted [ 7.630299] EXT4-fs (sda1): recovery complete [ 7.641098] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 8.130791] udev: starting version 151 [ 8.490383] lp: driver loaded but no devices found [ 8.515324] parport_pc 00:09: reported by Plug and Play ACPI [ 8.515400] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 8.584614] ppdev: user-space parallel port driver [ 8.614806] lp0: using parport0 (interrupt-driven). [ 8.647100] type=1505 audit(1445006399.281:2): operation="profile_load" pid=720 name="/sbin/dhclient3" [ 8.647826] type=1505 audit(1445006399.281:3): operation="profile_load" pid=720 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.648254] type=1505 audit(1445006399.281:4): operation="profile_load" pid=720 name="/usr/lib/connman/scripts/dhclient-script" [ 8.804521] alloc irq_desc for 22 on node -1 [ 8.804529] alloc kstat_irqs on node -1 [ 8.804548] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.804646] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.936613] r8169: eth0: link up [ 8.936622] r8169: eth0: link up [ 8.977232] type=1505 audit(1445006399.613:5): operation="profile_load" pid=847 name="/usr/share/gdm/guest-session/Xsession" [ 8.980299] type=1505 audit(1445006399.613:6): operation="profile_replace" pid=848 name="/sbin/dhclient3" [ 8.981002] type=1505 audit(1445006399.617:7): operation="profile_replace" pid=848 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.981454] type=1505 audit(1445006399.617:8): operation="profile_replace" pid=848 name="/usr/lib/connman/scripts/dhclient-script" [ 8.989821] type=1505 audit(1445006399.625:9): operation="profile_load" pid=851 name="/usr/lib/cups/backend/cups-pdf" [ 8.995715] type=1505 audit(1445006399.629:10): operation="profile_load" pid=853 name="/usr/sbin/tcpdump" [ 8.996871] type=1505 audit(1445006399.633:11): operation="profile_load" pid=851 name="/usr/sbin/cupsd" [ 9.558473] CPU0 attaching NULL sched-domain. [ 9.558484] CPU1 attaching NULL sched-domain. [ 9.558490] CPU2 attaching NULL sched-domain. [ 9.558495] CPU3 attaching NULL sched-domain. [ 9.596145] CPU0 attaching sched-domain: [ 9.596152] domain 0: span 0-1 level SIBLING [ 9.596158] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 9.596170] domain 1: span 0-1 level MC [ 9.596176] groups: 0-1 (cpu_power = 1178) [ 9.596184] domain 2: span 0-3 level CPU [ 9.596189] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 9.596202] CPU1 attaching sched-domain: [ 9.596207] domain 0: span 0-1 level SIBLING [ 9.596211] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 9.596222] domain 1: span 0-1 level MC [ 9.596227] groups: 0-1 (cpu_power = 1178) [ 9.596235] domain 2: span 0-3 level CPU [ 9.596240] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 9.596252] CPU2 attaching sched-domain: [ 9.596257] domain 0: span 2-3 level SIBLING [ 9.596261] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 9.596272] domain 1: span 2-3 level MC [ 9.596277] groups: 2-3 (cpu_power = 1178) [ 9.596285] domain 2: span 0-3 level CPU [ 9.596290] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 9.596302] CPU3 attaching sched-domain: [ 9.596306] domain 0: span 2-3 level SIBLING [ 9.596311] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 9.596322] domain 1: span 2-3 level MC [ 9.596327] groups: 2-3 (cpu_power = 1178) [ 9.596335] domain 2: span 0-3 level CPU [ 9.596340] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 11.597846] CPU0 attaching NULL sched-domain. [ 11.597858] CPU1 attaching NULL sched-domain. [ 11.597865] CPU2 attaching NULL sched-domain. [ 11.597871] CPU3 attaching NULL sched-domain. [ 11.633071] CPU0 attaching sched-domain: [ 11.633081] domain 0: span 0-1 level SIBLING [ 11.633089] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 11.633105] domain 1: span 0-1 level MC [ 11.633111] groups: 0-1 (cpu_power = 1178) [ 11.633123] domain 2: span 0-3 level CPU [ 11.633129] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 11.633148] CPU1 attaching sched-domain: [ 11.633154] domain 0: span 0-1 level SIBLING [ 11.633160] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 11.633174] domain 1: span 0-1 level MC [ 11.633180] groups: 0-1 (cpu_power = 1178) [ 11.633191] domain 2: span 0-3 level CPU [ 11.633197] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 11.633215] CPU2 attaching sched-domain: [ 11.633220] domain 0: span 2-3 level SIBLING [ 11.633227] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 11.633241] domain 1: span 2-3 level MC [ 11.633247] groups: 2-3 (cpu_power = 1178) [ 11.633258] domain 2: span 0-3 level CPU [ 11.633264] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 11.633280] CPU3 attaching sched-domain: [ 11.633286] domain 0: span 2-3 level SIBLING [ 11.633292] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 11.633307] domain 1: span 2-3 level MC [ 11.633313] groups: 2-3 (cpu_power = 1178) [ 11.633324] domain 2: span 0-3 level CPU [ 11.633330] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 856.173905] I-pipe: Domain RTAI registered. [ 856.173926] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 856.173933] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 856.174048] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 856.174054] PIPELINE layers: [ 856.174061] f9249e20 9ac15d93 RTAI 200 [ 856.174067] c085cb20 0 Linux 100 [ 856.218922] RTAI[malloc]: global heap size = 2097152 bytes, . [ 856.219448] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 856.219463] RTAI[sched]: hard timer type/freq = APIC/8312470(Hz); default timing: periodic; linear timed lists. [ 856.219471] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1861882000 hz. [ 856.219476] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 856.219590] RTAI[usi]: enabled. [ 856.297608] RTAI[math]: loaded. [ 856.436341] hm2: loading Mesa HostMot2 driver version 0.15 [ 856.441734] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 856.441786] alloc irq_desc for 21 on node -1 [ 856.441791] alloc kstat_irqs on node -1 [ 856.441805] hm2_pci 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 856.441812] hm2_pci: discovered 5i25 at 0000:02:00.0 [ 856.444391] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 856.501515] Board hm2_5i25.0.7i77.0.0 Hardware Mode 0 = standard [ 856.504368] Board hm2_5i25.0.7i77.0.0 Software Mode 0 = input_output [ 856.506805] Board hm2_5i25.0.7i77.0.0 Software Mode 1 = io_analog [ 856.511001] Board hm2_5i25.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage [ 856.516335] Board hm2_5i25.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage [ 856.611604] Board hm2_5i25.0.7i77.0.1 Hardware Mode 0 = standard [ 856.614206] Board hm2_5i25.0.7i77.0.1 Software Mode 0 = analogout_enables [ 856.716606] hm2/hm2_5i25.0: 34 I/O Pins used: [ 856.716613] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort [ 856.716619] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort [ 856.716624] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort [ 856.716631] hm2/hm2_5i25.0: IO Pin 003 (P3-15): Smart Serial Interface #0, pin TxData1 (Output) [ 856.716639] hm2/hm2_5i25.0: IO Pin 004 (P3-03): Smart Serial Interface #0, pin RxData1 (Input) [ 856.716646] hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output) [ 856.716653] hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input) [ 856.716660] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) [ 856.716668] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) [ 856.716674] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) [ 856.716681] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) [ 856.716688] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) [ 856.716695] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) [ 856.716702] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) [ 856.716709] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input) [ 856.716715] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input) [ 856.716722] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input) [ 856.716728] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 856.716734] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 856.716739] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 856.716744] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 856.716749] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 856.716755] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 856.716760] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 856.716765] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 856.716770] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 856.716776] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 856.716781] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 856.716786] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 856.716791] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 856.716796] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 856.716802] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 856.716807] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 856.716812] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 856.716978] hm2/hm2_5i25.0: registered [ 856.716983] hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 [ 856.812679] hm2/hm2_5i25.0: Smart Serial Error: port 0 channel 0. You may see this error if the FPGA card read thread is not running. This error message will not repeat. [ 856.812689] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (13) Communication error [ 856.812695] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (3) Timeout [ 872.054641] hm2/hm2_5i25.0: Smart Serial Error: port 0 channel 1. You may see this error if the FPGA card read thread is not running. This error message will not repeat. [ 872.054651] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (13) Communication error [ 872.054656] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (3) Timeout [ 909.302979] [ 909.302989] In recent history there were [ 909.302992] 1785490, 2023889, 1677095, 2010834, and 1898449 [ 909.302994] elapsed clocks between calls to the motion controller. [ 909.303006] This time, there were 2074303 which is so anomalously [ 909.303009] large that it probably signifies a problem with your [ 909.303011] realtime configuration. For the rest of this run of [ 909.303013] EMC, this message will be suppressed. [ 909.303015] [ 910.014936] hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 [ 910.014947] hm2/hm2_5i25.0: unregistered [ 910.014979] hm2_pci 0000:02:00.0: PCI INT A disabled [ 910.015024] hm2_pci: driver unloaded [ 910.019212] hm2: unloading [ 912.306363] RTAI[math]: unloaded. [ 912.345437] SCHED releases registered named ALIEN RTGLBH [ 912.411444] RTAI[malloc]: unloaded. [ 912.509846] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 912.514004] I-pipe: Domain RTAI unregistered. [ 912.514121] RTAI[hal]: unmounted. [ 1769.155674] I-pipe: Domain RTAI registered. [ 1769.155688] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 1769.155693] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 1769.155790] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 1769.155795] PIPELINE layers: [ 1769.155800] f9249e20 9ac15d93 RTAI 200 [ 1769.155805] c085cb20 0 Linux 100 [ 1769.198282] RTAI[malloc]: global heap size = 2097152 bytes, . [ 1769.198858] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 1769.198869] RTAI[sched]: hard timer type/freq = APIC/8312470(Hz); default timing: periodic; linear timed lists. [ 1769.198877] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1861882000 hz. [ 1769.198882] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 1769.198995] RTAI[usi]: enabled. [ 1769.252139] RTAI[math]: loaded. [ 1769.376983] hm2: loading Mesa HostMot2 driver version 0.15 [ 1769.382731] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 1769.382792] hm2_pci 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1769.382801] hm2_pci: discovered 5i25 at 0000:02:00.0 [ 1769.385978] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 1769.443061] Board hm2_5i25.0.7i77.0.0 Hardware Mode 0 = standard [ 1769.445912] Board hm2_5i25.0.7i77.0.0 Software Mode 0 = input_output [ 1769.448349] Board hm2_5i25.0.7i77.0.0 Software Mode 1 = io_analog [ 1769.452494] Board hm2_5i25.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage [ 1769.457733] Board hm2_5i25.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage [ 1769.553098] Board hm2_5i25.0.7i77.0.1 Hardware Mode 0 = standard [ 1769.555702] Board hm2_5i25.0.7i77.0.1 Software Mode 0 = analogout_enables [ 1769.658200] hm2/hm2_5i25.0: 34 I/O Pins used: [ 1769.658207] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort [ 1769.658213] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort [ 1769.658218] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort [ 1769.658225] hm2/hm2_5i25.0: IO Pin 003 (P3-15): Smart Serial Interface #0, pin TxData1 (Output) [ 1769.658233] hm2/hm2_5i25.0: IO Pin 004 (P3-03): Smart Serial Interface #0, pin RxData1 (Input) [ 1769.658240] hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output) [ 1769.658247] hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input) [ 1769.658255] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) [ 1769.658262] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) [ 1769.658268] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) [ 1769.658275] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) [ 1769.658282] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) [ 1769.658289] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) [ 1769.658296] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) [ 1769.658303] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input) [ 1769.658309] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input) [ 1769.658316] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input) [ 1769.658322] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 1769.658327] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 1769.658333] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 1769.658338] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 1769.658343] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 1769.658348] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 1769.658353] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 1769.658358] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 1769.658364] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 1769.658369] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 1769.658374] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 1769.658379] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 1769.658384] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 1769.658390] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 1769.658395] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 1769.658400] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 1769.658405] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 1769.658568] hm2/hm2_5i25.0: registered [ 1769.658573] hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 [ 1769.786712] hm2/hm2_5i25.0: Smart Serial Error: port 0 channel 0. You may see this error if the FPGA card read thread is not running. This error message will not repeat. [ 1769.786723] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (13) Communication error [ 1769.786728] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 error = (3) Timeout [ 1772.966138] hm2/hm2_5i25.0: Smart Serial Error: port 0 channel 1. You may see this error if the FPGA card read thread is not running. This error message will not repeat. [ 1772.966148] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (13) Communication error [ 1772.966154] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.1 error = (3) Timeout [ 1804.817227] [ 1804.817232] In recent history there were [ 1804.817235] 1681631, 1939287, 1815534, 1904609, and 2024008 [ 1804.817238] elapsed clocks between calls to the motion controller. [ 1804.817247] This time, there were 2094302 which is so anomalously [ 1804.817251] large that it probably signifies a problem with your [ 1804.817254] realtime configuration. For the rest of this run of [ 1804.817257] EMC, this message will be suppressed. [ 1804.817260] [ 1808.073225] hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 [ 1808.073237] hm2/hm2_5i25.0: unregistered [ 1808.073271] hm2_pci 0000:02:00.0: PCI INT A disabled [ 1808.073870] hm2_pci: driver unloaded [ 1808.078488] hm2: unloading [ 1810.346727] RTAI[math]: unloaded. [ 1810.388236] SCHED releases registered named ALIEN RTGLBH [ 1810.449882] RTAI[malloc]: unloaded. [ 1810.548820] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 1810.552996] I-pipe: Domain RTAI unregistered. [ 1810.553114] RTAI[hal]: unmounted. k1@k1-desktop:~$