/home/k1/linuxcnc-joints_axes9/scripts/linuxcnc '/home/k1/linuxcnc/configs/n/n.ini'
LINUXCNC - 2.8.0~pre1-ja
Machine configuration directory is '/home/k1/linuxcnc/configs/n'
Machine configuration file is 'n.ini'
Starting LinuxCNC...
Found file(REL): ./n.hal
waiting for s.joints
waiting for s.joints
waiting for s.joints
waiting for s.joints
waiting for s.joints
waiting for s.joints
waiting for s.joints
waiting for s.joints
waiting for s.joints
A configuration error is preventing LinuxCNC from starting.
More information may be available when running from a terminal.
Shutting down and cleaning up LinuxCNC...
/home/k1/linuxcnc-joints_axes9/bin/milltask (pid 2965) died on signal 11, backtrace stored in /tmp/backtrace.2965
/home/k1/linuxcnc-joints_axes9/bin/milltask exiting
<commandline>:0: milltask exited without becoming ready
Running HAL shutdown script
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/k1/linuxcnc_debug.txt
and
    /home/k1/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal