[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fe74000 (usable) [ 0.000000] BIOS-e820: 000000001fe74000 - 000000001fe76000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fe76000 - 000000001fe97000 (ACPI data) [ 0.000000] BIOS-e820: 000000001fe97000 - 000000001ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Dell Computer Corporation Dimension 2400 /0K5148, BIOS A05 12/02/2003 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x1fe74 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 01FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fe74000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fe74000 page 4k [ 0.000000] kernel direct mapping tables up to 0x1fe73fff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 1e695000 - 1f474000 [ 0.000000] ACPI: RSDP 000feb80 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fd22a 00034 (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fd25e 00074 (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffcc0f1 02404 (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 1fe74000 00040 [ 0.000000] ACPI: SSDT fffce632 000BA (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fd2d2 0006C (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd33e 00028 (v01 DELL 2400 00000007 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 510MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fe74000 [ 0.000000] low ram: 0 - 1fe74000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fe74 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0001fe74 [ 0.000000] On node 0 totalpages: 130564 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map dfa73200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 989 pages used for memmap [ 0.000000] Normal zone: 125591 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:ded00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @dfa2b000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129543 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=17df7131-6ae2-4fef-ac83-c88aa1609736 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1045280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 496372k/522704k available (3495k kernel code, 25884k reserved, 1237k data, 416k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe0674000 - 0xff7fe000 ( 497 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe74000 ( 510 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=de008000 soft=de00a000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2392.744 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.48 BogoMIPS (lpj=9570976) [ 0.004014] pid_max: default: 32768 minimum: 301 [ 0.004129] Security Framework initialized [ 0.004142] AppArmor: AppArmor disabled by boot time parameter [ 0.004193] Mount-cache hash table entries: 512 [ 0.004643] Initializing cgroup subsys cpuacct [ 0.004653] Initializing cgroup subsys memory [ 0.004672] Initializing cgroup subsys devices [ 0.004677] Initializing cgroup subsys freezer [ 0.004682] Initializing cgroup subsys net_cls [ 0.004686] Initializing cgroup subsys blkio [ 0.004701] Initializing cgroup subsys perf_event [ 0.004778] CPU0: Hyper-Threading is disabled [ 0.004787] mce: CPU supports 4 MCE banks [ 0.004803] CPU0: Thermal monitoring enabled (TM1) [ 0.004907] SMP alternatives: switching to UP code [ 0.013772] ACPI: Core revision 20120320 [ 0.039546] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.039930] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079631] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09 [ 0.080004] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.080004] ... version: 0 [ 0.080004] ... bit width: 40 [ 0.080004] ... generic registers: 18 [ 0.080004] ... value mask: 000000ffffffffff [ 0.080004] ... max period: 0000007fffffffff [ 0.080004] ... fixed-purpose events: 0 [ 0.080004] ... event mask: 000000000003ffff [ 0.088064] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.088194] Brought up 1 CPUs [ 0.088201] Total of 1 processors activated (4785.48 BogoMIPS). [ 0.088951] devtmpfs: initialized [ 0.089527] PM: Registering ACPI NVS region [mem 0x1fe74000-0x1fe75fff] (8192 bytes) [ 0.089811] dummy: [ 0.089974] NET: Registered protocol family 16 [ 0.090296] ACPI: bus type pci registered [ 0.090735] PCI: PCI BIOS revision 2.10 entry at 0xfbbbf, last bus=1 [ 0.090742] PCI: Using configuration type 1 for base access [ 0.092249] bio: create slab at 0 [ 0.092560] ACPI: Added _OSI(Module Device) [ 0.092569] ACPI: Added _OSI(Processor Device) [ 0.092575] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.092580] ACPI: Added _OSI(Processor Aggregator Device) [ 0.093700] ACPI: EC: Look up EC in DSDT [ 0.113514] ACPI: Interpreter enabled [ 0.113541] ACPI: (supports S0 S1 S3 S4 S5) [ 0.113613] ACPI: Using IOAPIC for interrupt routing [ 0.155355] ACPI: No dock devices found. [ 0.155374] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.157020] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.160481] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.160490] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.160495] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.160500] pci_root PNP0A03:00: host bridge window [mem 0x80860000-0xfebfffff] (ignored) [ 0.160506] PCI: root bus 00: using default resources [ 0.160640] PCI host bridge to bus 0000:00 [ 0.160649] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.160653] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.160678] pci 0000:00:00.0: [8086:2560] type 00 class 0x060000 [ 0.160695] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.160794] pci 0000:00:02.0: [8086:2562] type 00 class 0x038000 [ 0.160819] pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xefffffff pref] [ 0.160835] pci 0000:00:02.0: reg 14: [mem 0xfeb80000-0xfebfffff] [ 0.160971] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300 [ 0.161037] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f] [ 0.161094] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300 [ 0.161158] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f] [ 0.161210] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300 [ 0.161273] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f] [ 0.161344] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320 [ 0.161376] pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff] [ 0.161485] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.161518] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400 [ 0.161586] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100 [ 0.161594] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.161595] * this clock source is slow. If you are sure your timer does not have [ 0.161597] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.161709] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a [ 0.161731] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.161748] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.161765] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.161783] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.161800] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.161818] pci 0000:00:1f.1: reg 24: [mem 0xfeb7fc00-0xfeb7ffff] [ 0.161867] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500 [ 0.161931] pci 0000:00:1f.3: reg 20: [io 0xeda0-0xedbf] [ 0.161985] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100 [ 0.162009] pci 0000:00:1f.5: reg 10: [io 0xee00-0xeeff] [ 0.162023] pci 0000:00:1f.5: reg 14: [io 0xedc0-0xedff] [ 0.162037] pci 0000:00:1f.5: reg 18: [mem 0xfeb7fa00-0xfeb7fbff] [ 0.162052] pci 0000:00:1f.5: reg 1c: [mem 0xfeb7f900-0xfeb7f9ff] [ 0.162108] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.162170] pci 0000:01:04.0: [1814:0301] type 00 class 0x028000 [ 0.162197] pci 0000:01:04.0: reg 10: [mem 0xfe9e8000-0xfe9effff] [ 0.162303] pci 0000:01:05.0: [2718:5125] type 00 class 0x110000 [ 0.162324] pci 0000:01:05.0: reg 10: [mem 0xfe9f0000-0xfe9fffff] [ 0.162415] pci 0000:01:06.0: [102b:051a] type 00 class 0x030000 [ 0.162436] pci 0000:01:06.0: reg 10: [mem 0xfe9e4000-0xfe9e7fff] [ 0.162451] pci 0000:01:06.0: reg 14: [mem 0xf8000000-0xf87fffff pref] [ 0.162465] pci 0000:01:06.0: reg 18: [mem 0xfe000000-0xfe7fffff] [ 0.162507] pci 0000:01:06.0: reg 30: [mem 0xfea00000-0xfea0ffff pref] [ 0.162542] pci 0000:01:09.0: [14e4:4401] type 00 class 0x020000 [ 0.162567] pci 0000:01:09.0: reg 10: [mem 0xfe9e2000-0xfe9e3fff] [ 0.162629] pci 0000:01:09.0: reg 30: [mem 0xfea00000-0xfea03fff pref] [ 0.162656] pci 0000:01:09.0: supports D1 D2 [ 0.162660] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.162708] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.162719] pci 0000:00:1e.0: bridge window [mem 0xfe000000-0xfeafffff] [ 0.162727] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf87fffff pref] [ 0.162732] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.162737] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.162752] pci_bus 0000:00: on NUMA node 0 [ 0.162766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.163498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.164336] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0e) [ 0.337582] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.338021] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.338462] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.338892] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.339325] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.339756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.340231] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.340672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.341005] vgaarb: device added: PCI:0000:01:06.0,decodes=io+mem,owns=io+mem,locks=none [ 0.341014] vgaarb: loaded [ 0.341017] vgaarb: bridge control possible 0000:01:06.0 [ 0.341099] PCI: Using ACPI for IRQ routing [ 0.341109] PCI: pci_cache_line_size set to 64 bytes [ 0.341211] reserve RAM buffer: 000000001fe74000 - 000000001fffffff [ 0.341679] pnp: PnP ACPI init [ 0.341712] ACPI: bus type pnp registered [ 0.345840] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.345847] pnp 00:00: [mem 0x00100000-0x00ffffff] [ 0.345853] pnp 00:00: [mem 0x01000000-0x1fe73fff] [ 0.345858] pnp 00:00: [mem 0x000c0000-0x000fffff] [ 0.345863] pnp 00:00: [mem 0xfec00000-0xfec0ffff] [ 0.345867] pnp 00:00: [mem 0xfee00000-0xfee0ffff] [ 0.345871] pnp 00:00: [mem 0xfecf0000-0xfecf0fff] [ 0.345875] pnp 00:00: [mem 0xffb00000-0xffbfffff] [ 0.345879] pnp 00:00: [mem 0xffc00000-0xffffffff] [ 0.346007] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.346017] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved [ 0.346024] system 00:00: [mem 0x01000000-0x1fe73fff] could not be reserved [ 0.346030] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved [ 0.346037] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.346042] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.346048] system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved [ 0.346053] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.346058] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved [ 0.346066] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.347807] pnp 00:01: [bus 00-ff] [ 0.347815] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.347821] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.347825] pnp 00:01: [io 0x0d00-0xffff window] [ 0.347830] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.347834] pnp 00:01: [mem 0x80860000-0xfebfffff window] [ 0.347932] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.350652] pnp 00:02: [io 0x0080-0x009f] [ 0.350660] pnp 00:02: [io 0x0000-0x001f] [ 0.350664] pnp 00:02: [io 0x00c0-0x00df] [ 0.350669] pnp 00:02: [dma 4] [ 0.350760] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.350908] pnp 00:03: [io 0x00f0-0x00ff] [ 0.350934] pnp 00:03: [irq 13] [ 0.351014] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.351163] pnp 00:04: [io 0x0061] [ 0.351242] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.351386] pnp 00:05: [io 0x0070-0x007f] [ 0.351408] pnp 00:05: [irq 8] [ 0.351499] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.354785] pnp 00:06: [io 0x03f0-0x03f5] [ 0.354792] pnp 00:06: [io 0x03f7] [ 0.354814] pnp 00:06: [irq 6] [ 0.354821] pnp 00:06: [dma 2] [ 0.355163] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.360398] pnp 00:07: [io 0x03f8-0x03ff] [ 0.360422] pnp 00:07: [irq 4] [ 0.360719] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.364441] pnp 00:08: [io 0x0378-0x037f] [ 0.364449] pnp 00:08: [io 0x0778-0x077f] [ 0.364471] pnp 00:08: [irq 7] [ 0.364478] pnp 00:08: [dma 0 disabled] [ 0.365112] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.367032] pnp 00:09: [io 0x0060] [ 0.367039] pnp 00:09: [io 0x0064] [ 0.367043] pnp 00:09: [io 0x0062-0x0063] [ 0.367047] pnp 00:09: [io 0x0065-0x006f] [ 0.367051] pnp 00:09: [io 0x00e0-0x00ef] [ 0.367055] pnp 00:09: [io 0x0800-0x085f] [ 0.367059] pnp 00:09: [io 0x0c00-0x0c7f] [ 0.367063] pnp 00:09: [io 0x0860-0x08ff] [ 0.367205] system 00:09: [io 0x0800-0x085f] has been reserved [ 0.367214] system 00:09: [io 0x0c00-0x0c7f] has been reserved [ 0.367220] system 00:09: [io 0x0860-0x08ff] has been reserved [ 0.367228] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.368253] pnp: PnP ACPI: found 10 devices [ 0.368260] ACPI: ACPI bus type pnp unregistered [ 0.368268] PnPBIOS: Disabled by ACPI PNP [ 0.409281] Switching to clocksource acpi_pm [ 0.409347] pci 0000:01:09.0: address space collision: [mem 0xfea00000-0xfea03fff pref] conflicts with 0000:01:06.0 [mem 0xfea00000-0xfea0ffff pref] [ 0.409385] pci 0000:01:09.0: BAR 6: assigned [mem 0xfe800000-0xfe803fff pref] [ 0.409395] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.409405] pci 0000:00:1e.0: bridge window [mem 0xfe000000-0xfeafffff] [ 0.409413] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf87fffff pref] [ 0.409439] pci 0000:00:1e.0: setting latency timer to 64 [ 0.409448] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.409453] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.409458] pci_bus 0000:01: resource 1 [mem 0xfe000000-0xfeafffff] [ 0.409462] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xf87fffff pref] [ 0.409467] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.409471] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff] [ 0.409610] NET: Registered protocol family 2 [ 0.409757] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.410131] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.410260] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.410488] TCP: Hash tables configured (established 16384 bind 16384) [ 0.410496] TCP: reno registered [ 0.410514] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.410533] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.410792] NET: Registered protocol family 1 [ 0.411065] pci 0000:01:06.0: Boot video device [ 0.411079] PCI: CLS 64 bytes, default 64 [ 0.411193] Unpacking initramfs... [ 1.009289] Freeing initrd memory: 14204k freed [ 1.037173] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 1.037183] Simple Boot Flag at 0x7a set to 0x1 [ 1.038022] audit: initializing netlink socket (disabled) [ 1.038072] type=2000 audit(1417548569.036:1): initialized [ 1.052872] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.053283] VFS: Disk quotas dquot_6.5.2 [ 1.053347] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.053541] msgmni has been set to 997 [ 1.054079] alg: No test for stdrng (krng) [ 1.054180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.054189] io scheduler noop registered [ 1.054193] io scheduler deadline registered [ 1.054238] io scheduler cfq registered (default) [ 1.054436] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.054479] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.054484] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.055049] GHES: HEST is not enabled! [ 1.055083] isapnp: Scanning for PnP cards... [ 1.409650] isapnp: No Plug & Play device found [ 1.409806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.430248] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.451328] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.451710] Linux agpgart interface v0.103 [ 1.451871] agpgart-intel 0000:00:00.0: Intel 845G Chipset [ 1.451916] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable [ 1.452081] agpgart-intel 0000:00:00.0: detected 1024K stolen memory [ 1.452286] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 1.452547] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.455848] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.455942] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.456297] mousedev: PS/2 mouse device common for all mice [ 1.456448] rtc_cmos 00:05: RTC can wake from S4 [ 1.456679] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.456720] rtc0: alarms up to one day, 242 bytes nvram [ 1.456962] TCP: cubic registered [ 1.457068] NET: Registered protocol family 10 [ 1.457614] Mobile IPv6 [ 1.457627] NET: Registered protocol family 17 [ 1.457648] Registering the dns_resolver key type [ 1.457758] Using IPI No-Shortcut mode [ 1.458093] PM: Hibernation image not present or could not be loaded. [ 1.458127] registered taskstats version 1 [ 1.458689] rtc_cmos 00:05: setting system clock to 2014-12-02 19:29:30 UTC (1417548570) [ 1.458905] Freeing unused kernel memory: 416k freed [ 1.459708] Write protecting the kernel text: 3496k [ 1.459743] Write protecting the kernel read-only data: 984k [ 1.504594] udevd[45]: starting version 175 [ 1.738996] usbcore: registered new interface driver usbfs [ 1.739074] usbcore: registered new interface driver hub [ 1.744893] FDC 0 is a post-1991 82077 [ 1.745009] usbcore: registered new device driver usb [ 1.753481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.753630] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.753640] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.753705] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.753768] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.777420] uhci_hcd: USB Universal Host Controller Interface driver [ 1.786656] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.786700] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800 [ 1.797403] SCSI subsystem initialized [ 1.800095] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.800205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.800211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.800216] usb usb1: Product: EHCI Host Controller [ 1.800220] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.800224] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.800553] hub 1-0:1.0: USB hub found [ 1.800571] hub 1-0:1.0: 6 ports detected [ 1.802485] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.802495] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.802529] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.802595] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 1.802693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.802700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.802705] usb usb2: Product: UHCI Host Controller [ 1.802709] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.802713] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.803025] hub 2-0:1.0: USB hub found [ 1.803042] hub 2-0:1.0: 2 ports detected [ 1.803326] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.803335] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.803366] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.803444] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 1.803532] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.803538] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.803542] usb usb3: Product: UHCI Host Controller [ 1.803546] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.803550] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.803859] hub 3-0:1.0: USB hub found [ 1.803876] hub 3-0:1.0: 2 ports detected [ 1.804233] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.804242] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.804272] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.804339] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 1.804430] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.804437] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.804441] usb usb4: Product: UHCI Host Controller [ 1.804445] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.804449] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.806686] hub 4-0:1.0: USB hub found [ 1.806704] hub 4-0:1.0: 2 ports detected [ 1.824134] ssb: Found chip with id 0x4401, rev 0x01 and package 0x00 [ 1.824148] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243) [ 1.824157] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) [ 1.824166] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243) [ 1.824294] libata version 3.00 loaded. [ 1.825208] ata_piix 0000:00:1f.1: version 2.13 [ 1.825328] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.834571] scsi0 : ata_piix [ 1.838696] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x17 [ 1.838812] scsi1 : ata_piix [ 1.838944] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.838951] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.864258] ssb: Sonics Silicon Backplane found on PCI device 0000:01:09.0 [ 1.864346] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0 [ 1.884829] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:0f:1f:97:6a:eb [ 1.996554] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F501, max UDMA/33 [ 2.000698] ata1.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133 [ 2.000707] ata1.00: 240121728 sectors, multi 8: LBA [ 2.000718] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.004516] ata2.00: configured for UDMA/33 [ 2.016489] ata1.00: configured for UDMA/33 [ 2.016816] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5 [ 2.017968] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616E F501 PQ: 0 ANSI: 5 [ 2.041633] microcode: CPU0 updated to revision 0x2e, date = 2004-08-11 [ 2.042026] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.048089] Refined TSC clocksource calibration: 2392.937 MHz. [ 2.048102] Switching to clocksource tsc [ 2.068826] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB) [ 2.069128] sd 0:0:0:0: [sda] Write Protect is off [ 2.069135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.069262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.073153] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray [ 2.073162] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.074767] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.095645] sda: sda1 sda2 < sda5 > [ 2.096917] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.109220] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.116594] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.352069] usb 2-1: new low-speed USB device number 2 using uhci_hcd [ 2.528583] usb 2-1: New USB device found, idVendor=03f0, idProduct=0024 [ 2.528593] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.528598] usb 2-1: Product: HP Basic USB Keyboard [ 2.528602] usb 2-1: Manufacturer: CHICONY [ 2.561335] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input0 [ 2.561735] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1/input0 [ 2.562550] usbcore: registered new interface driver usbhid [ 2.562558] usbhid: USB HID core driver [ 2.768044] usb 2-2: new low-speed USB device number 3 using uhci_hcd [ 2.931501] usb 2-2: New USB device found, idVendor=0461, idProduct=4d22 [ 2.931509] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.931514] usb 2-2: Product: USB Optical Mouse [ 2.948858] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1 [ 2.949138] generic-usb 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 7.567047] PM: Starting manual resume from disk [ 7.567058] PM: Hibernation image partition 8:5 present [ 7.567062] PM: Looking for hibernation image. [ 7.567617] PM: Image not found (code -22) [ 7.567624] PM: Hibernation image not present or could not be loaded. [ 7.630010] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.695790] udevd[302]: starting version 175 [ 10.109318] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 10.109336] ACPI: Power Button [VBTN] [ 10.111786] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 10.111801] ACPI: Power Button [PWRF] [ 10.242572] [drm] Initialized drm 1.1.0 20060810 [ 10.348419] intel_rng: FWH not detected [ 10.439676] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.440989] parport_pc 00:08: reported by Plug and Play ACPI [ 10.441050] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 10.543035] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 10.645440] iTCO_vendor_support: vendor-support=0 [ 10.651148] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 10.651335] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860) [ 10.651493] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.656428] udevd[367]: renamed network interface eth0 to eth1 [ 10.748568] i915 0000:00:02.0: enabling device (0000 -> 0002) [ 10.755692] i915 0000:00:02.0: setting latency timer to 64 [ 10.782932] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.782941] [drm] Driver supports precise vblank timestamp query. [ 10.782961] i915 0000:00:02.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment) [ 10.782966] [drm] failed to find VBIOS tables [ 10.785226] ------------[ cut here ]------------ [ 10.785273] WARNING: at /tmp/buildd/linux-3.4.55/debian/build/source_rtai/drivers/gpu/drm/i915/intel_display.c:966 assert_pipe+0x92/0xa0 [i915]() [ 10.785279] Hardware name: Dimension 2400 [ 10.785283] pipe A assertion failure (expected on, current off) [ 10.785287] Modules linked in: i915(+) snd_seq snd_seq_device snd_timer evdev iTCO_wdt iTCO_vendor_support video snd dcdbas soundcore ac97_bus psmouse parport_pc shpchp parport serio_raw rng_core i2c_i801 drm_kms_helper drm thermal_sys i2c_algo_bit i2c_core button ext4 crc16 jbd2 mbcache usbhid hid sg sr_mod cdrom sd_mod crc_t10dif ata_generic microcode ata_piix libata b44 ssb scsi_mod mmc_core mii uhci_hcd pcmcia pcmcia_core ehci_hcd usbcore floppy usb_common [last unloaded: scsi_wait_scan] [ 10.785379] Pid: 350, comm: modprobe Not tainted 3.4-9-rtai-686-pae #1 [ 10.785383] Call Trace: [ 10.785396] [] ? warn_slowpath_common+0x78/0xb0 [ 10.785423] [] ? assert_pipe+0x92/0xa0 [i915] [ 10.785448] [] ? assert_pipe+0x92/0xa0 [i915] [ 10.785458] [] ? warn_slowpath_fmt+0x33/0x40 [ 10.785482] [] ? assert_pipe+0x92/0xa0 [i915] [ 10.785506] [] ? intel_crtc_disable+0x39/0x70 [i915] [ 10.785519] [] ? drm_helper_disable_unused_functions+0xe7/0x140 [drm_kms_helper] [ 10.785545] [] ? intel_modeset_init+0x6fb/0x1120 [i915] [ 10.785565] [] ? i915_driver_load+0xb61/0xfe0 [i915] [ 10.785582] [] ? i915_stolen_to_phys+0x90/0x90 [i915] [ 10.785600] [] ? drm_sysfs_device_add+0x72/0xa0 [drm] [ 10.785618] [] ? drm_get_pci_dev+0x149/0x260 [drm] [ 10.785630] [] ? _raw_spin_lock_irqsave+0x41/0x70 [ 10.785638] [] ? pm_runtime_enable+0x17/0x80 [ 10.785647] [] ? pci_device_probe+0x8e/0x110 [ 10.785656] [] ? driver_probe_device+0x60/0x1d0 [ 10.785662] [] ? _raw_spin_unlock+0xd/0x30 [ 10.785668] [] ? pci_match_device+0x8f/0xa0 [ 10.785675] [] ? __driver_attach+0x79/0x80 [ 10.785681] [] ? driver_probe_device+0x1d0/0x1d0 [ 10.785687] [] ? bus_for_each_dev+0x42/0x70 [ 10.785693] [] ? pci_device_probe+0x110/0x110 [ 10.785699] [] ? driver_attach+0x19/0x20 [ 10.785705] [] ? driver_probe_device+0x1d0/0x1d0 [ 10.785711] [] ? bus_add_driver+0x16f/0x240 [ 10.785718] [] ? pci_device_probe+0x110/0x110 [ 10.785723] [] ? driver_register+0x5f/0x100 [ 10.785737] [] ? drm_pci_init+0x31/0x100 [drm] [ 10.785744] [] ? __pci_register_driver+0x3c/0xa0 [ 10.785752] [] ? do_one_initcall+0x32/0x190 [ 10.785759] [] ? set_memory_ro+0x31/0x40 [ 10.785773] [] ? 0xe0a09fff [ 10.785781] [] ? sys_init_module+0x8bd/0x1ad0 [ 10.785818] [] ? sysenter_do_call+0x12/0x16 [ 10.785825] ---[ end trace d3eecda6afb1d95c ]--- [ 10.792078] [drm] initialized overlay support [ 10.792117] ------------[ cut here ]------------ [ 10.792160] WARNING: at /tmp/buildd/linux-3.4.55/debian/build/source_rtai/drivers/gpu/drm/i915/intel_display.c:966 assert_pipe+0x92/0xa0 [i915]() [ 10.792166] Hardware name: Dimension 2400 [ 10.792170] pipe A assertion failure (expected on, current off) [ 10.792174] Modules linked in: i915(+) snd_seq snd_seq_device snd_timer evdev iTCO_wdt iTCO_vendor_support video snd dcdbas soundcore ac97_bus psmouse parport_pc shpchp parport serio_raw rng_core i2c_i801 drm_kms_helper drm thermal_sys i2c_algo_bit i2c_core button ext4 crc16 jbd2 mbcache usbhid hid sg sr_mod cdrom sd_mod crc_t10dif ata_generic microcode ata_piix libata b44 ssb scsi_mod mmc_core mii uhci_hcd pcmcia pcmcia_core ehci_hcd usbcore floppy usb_common [last unloaded: scsi_wait_scan] [ 10.792267] Pid: 350, comm: modprobe Tainted: G W 3.4-9-rtai-686-pae #1 [ 10.792271] Call Trace: [ 10.792286] [] ? warn_slowpath_common+0x78/0xb0 [ 10.792313] [] ? assert_pipe+0x92/0xa0 [i915] [ 10.792338] [] ? assert_pipe+0x92/0xa0 [i915] [ 10.792348] [] ? warn_slowpath_fmt+0x33/0x40 [ 10.792372] [] ? assert_pipe+0x92/0xa0 [i915] [ 10.792396] [] ? intel_crtc_disable+0x39/0x70 [i915] [ 10.792410] [] ? drm_helper_disable_unused_functions+0xe7/0x140 [drm_kms_helper] [ 10.792419] [] ? drm_fb_helper_initial_config+0x1c/0x220 [drm_kms_helper] [ 10.792427] [] ? sub_preempt_count+0x67/0xa0 [ 10.792435] [] ? kmem_cache_alloc+0xcf/0xe0 [ 10.792442] [] ? __kmalloc+0x107/0x120 [ 10.792447] [] ? kmem_cache_alloc+0xcf/0xe0 [ 10.792476] [] ? intel_fbdev_init+0x68/0xa0 [i915] [ 10.792496] [] ? i915_driver_load+0xdab/0xfe0 [i915] [ 10.792515] [] ? drm_sysfs_device_add+0x72/0xa0 [drm] [ 10.792531] [] ? drm_get_pci_dev+0x149/0x260 [drm] [ 10.792542] [] ? _raw_spin_lock_irqsave+0x41/0x70 [ 10.792550] [] ? pm_runtime_enable+0x17/0x80 [ 10.792559] [] ? pci_device_probe+0x8e/0x110 [ 10.792568] [] ? driver_probe_device+0x60/0x1d0 [ 10.792575] [] ? _raw_spin_unlock+0xd/0x30 [ 10.792581] [] ? pci_match_device+0x8f/0xa0 [ 10.792587] [] ? __driver_attach+0x79/0x80 [ 10.792593] [] ? driver_probe_device+0x1d0/0x1d0 [ 10.792599] [] ? bus_for_each_dev+0x42/0x70 [ 10.792606] [] ? pci_device_probe+0x110/0x110 [ 10.792612] [] ? driver_attach+0x19/0x20 [ 10.792617] [] ? driver_probe_device+0x1d0/0x1d0 [ 10.792623] [] ? bus_add_driver+0x16f/0x240 [ 10.792630] [] ? pci_device_probe+0x110/0x110 [ 10.792635] [] ? driver_register+0x5f/0x100 [ 10.792649] [] ? drm_pci_init+0x31/0x100 [drm] [ 10.792656] [] ? __pci_register_driver+0x3c/0xa0 [ 10.792663] [] ? do_one_initcall+0x32/0x190 [ 10.792670] [] ? set_memory_ro+0x31/0x40 [ 10.792684] [] ? 0xe0a09fff [ 10.792691] [] ? sys_init_module+0x8bd/0x1ad0 [ 10.792729] [] ? sysenter_do_call+0x12/0x16 [ 10.792736] ---[ end trace d3eecda6afb1d95d ]--- [ 10.824084] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [ 10.828062] render error detected, EIR: 0x00000010 [ 10.828062] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [ 10.828062] render error detected, EIR: 0x00000010 [ 10.880447] No connectors reported connected with modes [ 10.880460] [drm] Cannot find any crtc or sizes - going 1024x768 [ 10.936540] Console: switching to colour frame buffer device 128x48 [ 10.964656] fb0: inteldrmfb frame buffer device [ 10.964663] drm: registered panic notifier [ 10.964684] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.091443] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 11.274795] cfg80211: Calling CRDA to update world regulatory domain [ 11.512080] intel8x0_measure_ac97_clock: measured 54576 usecs (2630 samples) [ 11.512088] intel8x0: clocking to 48000 [ 11.572524] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.574292] Registered led device: rt61pci-phy0::radio [ 11.574529] Registered led device: rt61pci-phy0::assoc [ 12.180428] cfg80211: World regulatory domain updated: [ 12.180439] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.180444] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 12.180449] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 12.180454] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 12.180459] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 12.180463] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 12.180470] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 12.180474] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 12.180479] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 13.896627] Adding 2072572k swap on /dev/sda5. Priority:-1 extents:1 across:2072572k [ 13.946670] EXT4-fs (sda1): re-mounted. Opts: (null) [ 14.283230] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.467737] loop: module loaded [ 17.691852] RPC: Registered named UNIX socket transport module. [ 17.691860] RPC: Registered udp transport module. [ 17.691864] RPC: Registered tcp transport module. [ 17.691867] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.746075] FS-Cache: Loaded [ 17.793451] NFS: Registering the id_resolver key type [ 17.793509] FS-Cache: Netfs 'nfs' registered for caching [ 17.815109] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 20.496236] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input4 [ 22.757017] Bluetooth: Core ver 2.16 [ 22.758106] NET: Registered protocol family 31 [ 22.758114] Bluetooth: HCI device and connection manager initialized [ 22.758120] Bluetooth: HCI socket layer initialized [ 22.758124] Bluetooth: L2CAP socket layer initialized [ 22.758149] Bluetooth: SCO socket layer initialized [ 22.788251] Bluetooth: RFCOMM TTY layer initialized [ 22.788269] Bluetooth: RFCOMM socket layer initialized [ 22.788274] Bluetooth: RFCOMM ver 1.11 [ 22.813290] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.813298] Bluetooth: BNEP filters: protocol multicast [ 22.969233] lp0: using parport0 (interrupt-driven). [ 23.049710] ppdev: user-space parallel port driver [ 25.528214] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.616967] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 93.048264] I-pipe: head domain RTAI registered. [ 93.048283] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 93.048295] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 93.048302] SYSINFO: CPUs 1, LINUX APIC IRQ 2312, TIM_FREQ 6231610, CLK_FREQ 2392744000, CPU_FREQ 2392744000 [ 93.048307] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 93.048313] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 6231610, 6231610, 6150750 [ 93.158504] RTAI[malloc]: global heap size = 2097152 bytes, . [ 93.158641] , , kstacks pool size = 524288 bytes. [ 93.158654] RTAI[sched]: hard timer type/freq = APIC/6231610(Hz); default timing: oneshot; linear timed lists. [ 93.158661] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2392744000 hz. [ 93.158665] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 93.206941] RTAI[math]: loaded. [ 93.687684] hm2: loading Mesa HostMot2 driver version 0.15 [ 93.711446] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 93.711525] hm2_pci: discovered 5i25 at 0000:01:05.0 [ 93.712388] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 93.769598] hm2/hm2_5i25.0: 34 I/O Pins used: [ 93.769610] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort [ 93.769614] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort [ 93.769619] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort [ 93.769623] hm2/hm2_5i25.0: IO Pin 003 (P3-15): IOPort [ 93.769627] hm2/hm2_5i25.0: IO Pin 004 (P3-03): IOPort [ 93.769631] hm2/hm2_5i25.0: IO Pin 005 (P3-16): IOPort [ 93.769635] hm2/hm2_5i25.0: IO Pin 006 (P3-04): IOPort [ 93.769641] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) [ 93.769646] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) [ 93.769651] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) [ 93.769656] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) [ 93.769661] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) [ 93.769666] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) [ 93.769672] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) [ 93.769676] hm2/hm2_5i25.0: IO Pin 014 (P3-11): IOPort [ 93.769680] hm2/hm2_5i25.0: IO Pin 015 (P3-12): IOPort [ 93.769685] hm2/hm2_5i25.0: IO Pin 016 (P3-13): IOPort [ 93.769689] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 93.769693] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 93.769697] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 93.769701] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 93.769705] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 93.769709] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 93.769714] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 93.769718] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 93.769722] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 93.769726] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 93.769730] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 93.769734] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 93.769738] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 93.769743] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 93.769747] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 93.769751] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 93.769755] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 93.769848] hm2/hm2_5i25.0: registered [ 93.769855] hm2_5i25.0: initialized AnyIO board at 0000:01:05.0 [ 94.728757] hm2_5i25.0: dropping AnyIO board at 0000:01:05.0 [ 94.728773] hm2/hm2_5i25.0: unregistered [ 94.729811] hm2_pci: driver unloaded [ 94.736429] hm2: unloading [ 94.924300] RTAI[math]: unloaded. [ 94.930994] SCHED releases registered named ALIEN PEDV$D [ 94.947704] RTAI[malloc]: unloaded. [ 95.044046] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 95.050846] I-pipe: head domain RTAI unregistered. [ 95.050866] RTAI[hal]: unmounted.