Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0-pre0-350-g435c86a8e Machine configuration directory is '/home/eweaver/linuxcnc/configs/LinuxCNC_Plasma' Machine configuration file is 'LinuxCNC_Plasma.ini' INIFILE=/home/eweaver/linuxcnc/configs/LinuxCNC_Plasma/LinuxCNC_Plasma.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./LinuxCNC_Plasma.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis task: main loop took 0.129861 seconds Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 3637 cycles, min=0.000007, max=0.129861, avg=0.010036, 1 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:05:00.0 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) hm2/hm2_5i25.0: IO Pin 006 (P3-04): IOPort hm2/hm2_5i25.0: IO Pin 007 (P3-17): IOPort hm2/hm2_5i25.0: IO Pin 008 (P3-05): IOPort hm2/hm2_5i25.0: IO Pin 009 (P3-06): IOPort hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin TxData0 (Output) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin RxData0 (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:05:00.0 hm2_5i25.0: dropping AnyIO board at 0000:05:00.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime note: MAXV max: 6.000 units/sec 360.000 units/min note: LJOG max: 6.000 units/sec 360.000 units/min note: LJOG default: 4.000 units/sec 240.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) python: emc/rs274ngc/interp_setup.cc:189: setup::~setup(): Assertion `!pythis || Py_IsInitialized()' failed. /usr/bin/linuxcnc: line 896: 2255 Aborted $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS 2223 2251 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7f5edd379000 Note: Using POSIX realtime Kernel message information: /usr/lib/tcltk/linuxcnc/show_errors.tcl: dmesg: read kernel buffer failed: Operation not permitted dmesg requires root privilege on this system Description: Debian GNU/Linux 9.9 (stretch) Use a terminal to issue the command: sudo dmesg ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Thu Jul 25 15:32:55 CDT 2019 UTC Date: Thu Jul 25 20:32:55 UTC 2019 this program: /usr/bin/linuxcnc_info uptime: 15:32:55 up 26 min, 1 user, load average: 0.06, 0.09, 0.04 lsb_release -sa: Debian Debian GNU/Linux 9.9 (stretch) 9.9 stretch which linuxcnc: /usr/bin/linuxcnc pwd: /home/eweaver/linuxcnc/configs/LinuxCNC_Plasma USER: eweaver LOGNAME: eweaver HOME: /home/eweaver EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/eweaver/linuxcnc/configs/LinuxCNC_Plasma/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: debian kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.9.168-1+deb9u4 (2019-07-19) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-rt-amd64 root=UUID=5d07a713-faa2-40a6-a137-65039d8e05fa ro quiet model name: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz cores: 4 cpu MHz: 2353.192 parport: serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516 python: Python 2.7.13 git: git version 2.11.0 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0-pre0-350-g435c86a8e LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-===========================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.9.0~pre0.350.g435c86a8e all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.9.0~pre0.350.g435c86a8e amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.0~pre0.350.g435c86a8e amd64 PC based motion controller for real-time Linux