sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 9757 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running HAVE_GNOME: 1 INI file: ~/tmc/configs/tormach_mill/blacksheep_5i25_770.ini /home/operator/tmc/configs/tormach_mill/blacksheep_5i25_770.ini [HOSTMOT2] BITFILE0 = '' [HOSTMOT2] BITFILE0 entry not found in INI file. Assuming sim config. linuxcnc ~/tmc/configs/tormach_mill/blacksheep_5i25_770.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/blacksheep_5i25_770.ini ~/tmc/configs/tormach_mill/blacksheep_5i25_770.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/blacksheep_5i25_770.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'blacksheep_5i25_770.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/blacksheep_5i25_770.ini PARAMETER_FILE=~/mill_data/blacksheep.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/blacksheep_5i25_770.ini Starting TASK program: milltask task pid=9868 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter Setting tolerance to 0.000000 emcTaskPlanInit() returned 0 on_abort executing on_abort executing emcTaskPlanSynch() returned 0 Setting tolerance to 0.000000 emcTaskPlanInit() returned 0 emcTaskPlanSynch() returned 0 Warning: missing POSTGUI_SHUTTLEXPRESS_HALFILE in .INI file. UI version: v1.9.6b spindle type: 2 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE status.task_state was unknown is now STATE_ESTOP reset button was pressed at 2017-07-23 03:58:53 on_abort executing on_abort executing emcTaskPlanSynch() returned 0 emcTaskPlanSynch() returned 0 X axis limit switch active on_abort executing on_abort executing emcTaskPlanSynch() returned 0 on_abort executing on_abort executing exception getting X soft limit from redis - not setting exception getting Y soft limit from redis - not setting exception getting Z soft limit from redis - not setting emcTaskPlanSynch() returned 0 feedrate: 3000.0 X axis limit switch active Machine has been estopped. Restore power to machine and click Reset button to continue. status.task_state was STATE_ESTOP is now STATE_ESTOP_RESET reset button was pressed at 2017-07-23 03:58:57 on_abort executing on_abort executing emcTaskPlanSynch() returned 0 Machine has been estopped. Restore power to machine and click Reset button to continue. status.task_state was STATE_ESTOP_RESET is now STATE_ON clear button was pressed at 2017-07-23 03:59:00 enable home axis 0, flag 0 enable home axis 1, flag 0 enable home axis 2, flag 0 joint 0 following error on_abort executing on_abort executing on_abort executing on_abort executing joint 0 following error status.task_state was STATE_ON is now STATE_ESTOP_RESET reset button was pressed at 2017-07-23 03:59:38 emcTaskPlanSynch() returned 0 on_abort executing on_abort executing emcTaskPlanSynch() returned 0 Machine has been estopped. Restore power to machine and click Reset button to continue. status.task_state was STATE_ESTOP_RESET is now STATE_ON enable home axis 0, flag 1 enable home axis 1, flag 1 enable home axis 2, flag 1 CPU usage was 0.0, is now 16.0 CPU usage was 16.0, is now 2.0 CPU usage was 2.0, is now 20.6 CPU usage was 20.6, is now 10.0 CPU usage was 10.0, is now 4.0 CPU usage was 4.0, is now 28.0 CPU usage was 28.0, is now 5.9 CPU usage was 5.9, is now 2.0 CPU usage was 2.0, is now 26.5 CPU usage was 26.5, is now 2.0 CPU usage was 2.0, is now 0.0 exit button was pressed at 2017-07-23 04:00:20 on_abort executing on_abort executing emcTaskPlanSynch() returned 0 Shutting down and cleaning up LinuxCNC... 9813 Killing linuxcncsvr Killing task linuxcncsvr, PID=9813 PID TTY STAT TIME COMMAND 9868 Killing milltask Killing task milltask, PID=9868 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 9812 Killing redis-server Killing task redis-server, PID=9812 PID TTY STAT TIME COMMAND 9812 pts/1 Sl+ 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 831: 9783 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 9761 kill -KILL 9757 /home/operator/operator_login: line 255: 9757 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS"