# get linuxcnc from buildbot
# cd ~/Downloads
# wget http://buildbot2.highlab.com/buildbot-archive-key.gpg
# sudo cp ./buildbot-archive-key.gpg /etc/apt/trusted.gpg.d
# sudo cp ./99linuxcnc-uspace /etc/apt/preferences.d/
# BOOKWORM: sudo echo "deb http://buildbot2.highlab.com/debian/ bookworm 2.9-uspace" | sudo tee -a /etc/apt/sources.list
# BULLSEYE: sudo echo "deb http://buildbot2.highlab.com/debian/ bullseye 2.9-uspace" | sudo tee -a /etc/apt/sources.list
# sudo apt update
# sudo apt upgrade


package: linuxcnc-uspace
pin: release o=http://buildbot2.highlab.com/debian/
Pin-Priority: 500

package: linuxcnc-uspace-dev
pin: release o=http://buildbot2.highlab.com/debian/
Pin-Priority: 500

package: linuxcnc-uspace-doc-en linuxcnc-uspace-doc-de linuxcnc-uspace-doc-es linuxcnc-uspace-doc-fr linuxcnc-uspace-doc-zh-cn
pin: release o=http://buildbot2.highlab.com/debian/
Pin-Priority: 500

package: linuxcnc-uspace-doc-de
pin: release o=http://buildbot2.highlab.com/debian/
Pin-Priority: 500

package: linuxcnc-uspace-doc-es
pin: release o=http://buildbot2.highlab.com/debian/
Pin-Priority: 500

package: linuxcnc-uspace-doc-fr
pin: release o=http://buildbot2.highlab.com/debian/
Pin-Priority: 500

package: linuxcnc-uspace-doc-zh-cn
pin: release o=http://buildbot2.highlab.com/debian/
Pin-Priority: 500