#plasmac configuration file
#the next line is required for version checking
[VERSION 1]

#example only, may be deleted
#[MILD STEEL 1thick]
#PIERCE_HEIGHT      = 
#PIERCE_DELAY       = 
#PUDDLE_JUMP_HEIGHT = (optional, set to 0 or delete if not required)
#PUDDLE_JUMP_DELAY  = (optional, set to 0 or delete if not required)
#CUT_HEIGHT         = 
#CUT_SPEED          = 
#CUT_AMPS           = (optional, only used for operator information)
#CUT_VOLTS          = (modes 0 & 1 only, if not using auto voltage sampling)

[Mild Steel 1mm 40A]
PIERCE_HEIGHT      = 4.1
PIERCE_DELAY       = 0.0
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.1
CUT_SPEED          = 3266
CUT_AMPS           = 40
CUT_VOLTS          = 108

[Mild Steel 2mm 40A]
PIERCE_HEIGHT      = 4.1
PIERCE_DELAY       = 0.0
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.1
CUT_SPEED          = 2239
CUT_AMPS           = 40
CUT_VOLTS          = 108

[Mild Steel 3mm 40A]
PIERCE_HEIGHT      = 4.1
PIERCE_DELAY       = 0.1
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.1
CUT_SPEED          = 1794
CUT_AMPS           = 40
CUT_VOLTS          = 112

[Mild Steel 4mm 40A]
PIERCE_HEIGHT      = 4.1
PIERCE_DELAY       = 0.2
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.1
CUT_SPEED          = 1651
CUT_AMPS           = 40
CUT_VOLTS          = 114

[Mild Steel 6mm 60A]
PIERCE_HEIGHT      = 5.1
PIERCE_DELAY       = 0.3
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.4
CUT_SPEED          = 2230
CUT_AMPS           = 60
CUT_VOLTS          = 128

[Mild Steel 8mm 60A]
PIERCE_HEIGHT      = 5.1
PIERCE_DELAY       = 0.4
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.8
CUT_SPEED          = 1020
CUT_AMPS           = 45
CUT_VOLTS          = 133

[Mild Steel 10mm 80A]
PIERCE_HEIGHT      = 5.1
PIERCE_DELAY       = 0.5
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.8
CUT_SPEED          = 1000
CUT_AMPS           = 80
CUT_VOLTS          = 134

[Mild Steel 12mm 80A]
PIERCE_HEIGHT      = 5.1
PIERCE_DELAY       = 1
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.8
CUT_SPEED          = 935
CUT_AMPS           = 80
CUT_VOLTS          = 140

[Aluminium 1.6mm 40A]
PIERCE_HEIGHT      = 4.8
PIERCE_DELAY       = 0.1
PUDDLE_JUMP_HEIGHT = 0
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 4.8
CUT_SPEED          = 5200
CUT_AMPS           = 40
CUT_VOLTS          = 112