jd@plasma1 ~/linuxcnc/configs/plasma_test_1 $ linuxcnc plasma_test_1.ini LINUXCNC - 2.8.0-pre1-2759-gb1113ad Machine configuration directory is '/home/jd/linuxcnc/configs/plasma_test_1' Machine configuration file is 'plasma_test_1.ini' Starting LinuxCNC... Found file(REL): ./plasma_test_1_with_gantry.hal Note: Using POSIX realtime hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:10:40:7d hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 006 (P1-04): StepGen #3, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 007 (P1-17): StepGen #3, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 008 (P1-05): StepGen #4, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 009 (P1-06): StepGen #4, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin TxData0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin RxData0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Encoder #0, pin Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Encoder #0, pin B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Encoder #0, pin A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): IOPort hm2/hm2_7i76e.0: IO Pin 028 (P2-08): IOPort hm2/hm2_7i76e.0: IO Pin 029 (P2-09): IOPort hm2/hm2_7i76e.0: IO Pin 030 (P2-10): IOPort hm2/hm2_7i76e.0: IO Pin 031 (P2-11): IOPort hm2/hm2_7i76e.0: IO Pin 032 (P2-12): IOPort hm2/hm2_7i76e.0: IO Pin 033 (P2-13): IOPort hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered Found file(REL): ./custom.hal (0, ' = ', '/usr/bin/gmoccapy') (1, ' = ', '-ini') (2, ' = ', '/home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.ini') **** GMOCCAPY GETINIINFO **** Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref **** GMOCCAPY GETINIINFO **** No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file **** GMOCCAPY GETINIINFO **** No MAX_RAPID_OVERRIDE entry found in [DISPLAY] of INI file Default settings 100 % applied! /usr/bin/gmoccapy:283: GtkWarning: Invalid icon size 48 self.widgets.window1.show() **** GMOCCAPY INFO **** **** No gmoccapy2.glade file present **** ['ntb_preview', 'box_coolant_and_spindle', 'box_tool_and_code_info'] **** GMOCCAPY INFO **** **** audio available! **** **** GMOCCAPY INFO **** **** No virtual keyboard installed, we checked for and . /usr/bin/gladevcp:185: GtkWarning: IA__gtk_radio_button_set_group: assertion '!g_slist_find (group, radio_button)' failed builder.add_from_file(xmlname) **** GMOCCAPY GETINIINFO **** Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref **** GMOCCAPY INFO **** **** no valid probe config in INI File **** **** disabled tool measurement **** Xlib.protocol.request.QueryExtension Traceback (most recent call last): File "/usr/bin/gladevcp", line 309, in main() File "/usr/bin/gladevcp", line 210, in main handlers = load_handlers(opts.usermod,halcomp,builder,opts.useropts) File "/usr/bin/gladevcp", line 111, in load_handlers mod = __import__(basename) File "./plasma.py", line 110 self.target_voltage = hal_glib.GPin(halcomp.newpin("Target-Voltage-Main", hal.HAL_FLOAT, hal.HAL_OUT)) ^ IndentationError: unexpected indent **** GMOCCAPY INFO: Gcode.lang found **** (gmoccapy:4822): GtkSourceView-CRITICAL **: gtk_source_language_manager_set_search_path: assertion 'lm->priv->ids == NULL' failed **** GMOCCAPY GETINIINFO **** Wrong entry [DISPLAY] CYCLE_TIME in INI File! Will use gmoccapy default 150 **** GMOCCAPY INFO : inifile = /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.ini ****: **** GMOCCAPY INFO : postgui halfile = gmoccapy_postgui.hal ****: **** GMOCCAPY GETINIINFO **** Preference file path: /home/jd/linuxcnc/configs/plasma_test_1/plasma_test_1.pref /usr/bin/gladevcp:295: GtkWarning: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 gtk.main() Xlib.protocol.request.QueryExtension