[DEFAULT] dro_digits = 4 dro_size = 28 abs_color = #0000FF rel_color = #000000 dtg_color = #FFFF00 homed_color = #00FF00 unhomed_color = #FF0000 enable_dro = False scale_jog_vel = 1.0 scale_spindle_override = 2.0 scale_feed_override = 2.0 scale_rapid_override = 1 spindle_bar_min = 0.0 spindle_bar_max = 3500.0 turtle_jog_factor = 20 hide_turtle_jog_button = True unlock_code = 123 toggle_readout = True spindle_start_rpm = 2000.0 blockheight = 0.0 open_file = /home/pi/linuxcnc/nc_files/examples/3D_Chips.ngc screen1 = fullscreen x_pos = 40 y_pos = 30 width = 979 height = 750 use_toolmeasurement = False gtk_theme = Follow System Theme grid_size = 1.0 view = p mouse_btn_mode = 4 hide_cursor = False system_name_tool = Tool system_name_g5x = G5x system_name_rot = Rot system_name_g92 = G92 system_name_g54 = G54 system_name_g55 = G55 system_name_g56 = G56 system_name_g57 = G57 system_name_g58 = G58 system_name_g59 = G59 system_name_g59.1 = G59.1 system_name_g59.2 = G59.2 system_name_g59.3 = G59.3 jump_to_dir = /home/pi show_keyboard_on_offset = False show_keyboard_on_tooledit = False show_keyboard_on_edit = True show_keyboard_on_mdi = True show_keyboard_on_file_selection = False x_pos_popup = 45.0 y_pos_popup = 55 width_popup = 250.0 max_messages = 10 message_font = sans 10 use_frames = True reload_tool = True blockdel = False show_offsets = False show_dtg = False view_tool_path = True view_dimension = True run_from_line = no_run unlock_way = no show_preview_on_offset = False use_keyboard_shortcuts = False tool_in_spindle = 0