--------------------------------------------------------------- New PathPilot start at Wed Jan 31 16:42:23 CST 2024 { "build": 3, "kernels": [ "4.11.9-rt7" ], "status": "", "version": "v2.10.1" } --------------------------------------------------------------- DEBUG not defined so python IS optimizing. Disabling USB autosuspend /home/operator/v2.10.1/venv Entering Python virtual environment shifttest result is 0 starting log rotator setsid /home/operator/v2.10.1/scripts/logrotator.sh 3600 "/home/operator/gcode/logfiles/logrotate.conf" "/home/operator/gcode/logfiles/logrotate.status" LOGROTATOR_PID: 2343 shifttest result is 0 shifttest result is 0 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Changing screen resolution to 1024x768 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Screen resolution is already correct, not changing it. touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 Checking required additional .deb packages are installed Checking for package blt installed package: blt already installed. Checking for proper grub configuration... /etc/default/grub already configured for terminal output = vga_text on boot, no patch needed /etc/default/grub already configured for usbcore.autosuspend=-1, no patch needed Checking for proper samba configuration... Total RAM: 16384 MB /home/operator/tmc/scripts/drop_caches.sh starting . . . xset -dpms: xset s off: touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt /home/operator/dropbox.py not present and executable. Disabling ethernet rx irq coalescing sudo ethtool --coalesce eth0 rx-usecs 0 rx-frames 1: sudo ethtool --show-coalesce eth0: Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 0 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 USB mount point: /media/operator sudo python /home/operator/tmc/scripts/update-cgconfig.py: Total RAM: 16384 MB Utility CG Size: 6553 MB Utility CG VM Size: 6553 MB /etc/cgconfig.conf updated. cgconfigparser successfully loaded /etc/cgconfig.conf eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt eth0 Link encap:Ethernet HWaddr 34:17:eb:d8:83:be inet addr:10.10.10.9 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:55 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:8509 (8.5 KB) Interrupt:20 Memory:f7d00000-f7d20000 eth0 present on machine controller top of pathpilotmanager.py while() loop no update file found /home/operator/tmc/bin/rtapi_app owner: 0, group: 0, mode" 104755 sudo chown root:root /home/operator/tmc/bin/rtapi_app: sudo chmod 4755 /home/operator/tmc/bin/rtapi_app: /home/operator/tmc/bin/rtapi_app owner: 0, group: 0 mode" 104755 done checking rtapi_app permissions Running /home/operator/tmc/python/pplogin/pplogin.py Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. 2024-01-31 16:42:39.499349 | pam module: pam_ce [/home/operator/v2.10.1/python/pplogin/pammgr.py:40] 2024-01-31 16:42:39.690681 CST (+0:00:00.191332) | pam_ce.py:constructor called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:32] 2024-01-31 16:42:39.738594 CST (+0:00:00.047913) | pam_ce.py:login() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:60] 2024-01-31 16:42:39.739343 CST (+0:00:00.000749) | pam_ce.py:shutdown() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:54] Regenerating /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini because its dependent source files may have changed. Generating linuxcnc ini file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini configured INI file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini set_comm_method.py ethernet already setup for machine control by eth0 so not doing anything. Ethernet attached FPGA. [HOSTMOT2]DRIVER_PARAMS: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" params: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" FPGA IP address: 10.10.10.10 ip addr show eth0: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 34:17:eb:d8:83:be brd ff:ff:ff:ff:ff:ff inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever ip addr show eth0 | grep -w eth0:: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 BEFORE disabling autonegotiation for eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes 2024-01-31 16:42:40,214 | INFO | monitor_dir_size | starting with interval 5 minutes [monitor_dir_size.py:124] 2024-01-31 16:42:40,224 | ERROR | monitor_dir_size | du failed with return code 1: /usr/bin/du: cannot access ‘/home/operator/gcode/E-stop Videos’: No such file or directory [monitor_dir_size.py:114] ethtool returned 0 when turning autoneg off Ethernet FPGA not found at IP address 10.10.10.10 /home/operator/v2.10.1/python/pathpilotmanager.py:2604: Warning: Source ID 3 was not found when attempting to remove it glib.source_remove(timeout_id) Ethernet FPGA found at IP 10.10.10.10 FINAL settings for interface eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 2 Transceiver: internal Auto-negotiation: off MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes Supported mesa ethernet boards: 7i97T, 7i97T ['sudo', '/home/operator/tmc/bin/mesaflash', '--query', '--addr', '10.10.10.10', '--verbose'] Unsupported ethernet device 7I97T at 10.10.10.10 No reply to request packet regex pattern for mesa board type never matched the mesaflash query results; continuing. No Mesa Ethernet board found from query ['sudo', '/home/operator/tmc/bin/mesaflash', '--device', None, '--addr', '10.10.10.10', '--verify', None] pathpilotmanager exception: Traceback (most recent call last): File "/home/operator/v2.10.1/python/pathpilotmanager.py", line 3222, in ret_val = mgr.main_loop() File "/home/operator/v2.10.1/python/pathpilotmanager.py", line 2769, in main_loop success, code = self.verify_and_update_mesa_interface() File "/home/operator/v2.10.1/python/pathpilotmanager.py", line 2004, in verify_and_update_mesa_interface p = subprocess.Popen(mesa_verify) File "/usr/lib/python2.7/subprocess.py", line 710, in __init__ errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1327, in _execute_child raise child_exception TypeError: execv() arg 2 must contain only strings Traceback (most recent call last): File "/home/operator/v2.10.1/python/pathpilotmanager.py", line 3222, in ret_val = mgr.main_loop() File "/home/operator/v2.10.1/python/pathpilotmanager.py", line 2769, in main_loop success, code = self.verify_and_update_mesa_interface() File "/home/operator/v2.10.1/python/pathpilotmanager.py", line 2004, in verify_and_update_mesa_interface p = subprocess.Popen(mesa_verify) File "/usr/lib/python2.7/subprocess.py", line 710, in __init__ errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1327, in _execute_child raise child_exception TypeError: execv() arg 2 must contain only strings shifttest result is 0 up 4 minutes kill -s SIGTERM -2343 /home/operator/operator_login.running: line 198: 2343 Terminated setsid $LOGROTATOR $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" shifttest result is 0 sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux NOT running in virtualized OS environment.