--------------------------------------------------------------- New PathPilot start at Sat Feb 3 08:31:07 CST 2024 { "build": 3, "kernels": [ "4.11.9-rt7" ], "status": "", "version": "v2.10.1" } --------------------------------------------------------------- DEBUG not defined so python IS optimizing. Disabling USB autosuspend /home/operator/v2.10.1/venv Entering Python virtual environment shifttest result is 0 starting log rotator setsid /home/operator/v2.10.1/scripts/logrotator.sh 3600 "/home/operator/gcode/logfiles/logrotate.conf" "/home/operator/gcode/logfiles/logrotate.status" LOGROTATOR_PID: 2430 shifttest result is 0 shifttest result is 0 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Changing screen resolution to 1024x768 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Screen resolution is already correct, not changing it. touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 Checking required additional .deb packages are installed Checking for package blt installed package: blt already installed. Checking for proper grub configuration... /etc/default/grub already configured for terminal output = vga_text on boot, no patch needed /etc/default/grub already configured for usbcore.autosuspend=-1, no patch needed Checking for proper samba configuration... Total RAM: 16384 MB /home/operator/tmc/scripts/drop_caches.sh starting . . . xset -dpms: xset s off: touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt /home/operator/dropbox.py not present and executable. Disabling ethernet rx irq coalescing sudo ethtool --coalesce eth0 rx-usecs 0 rx-frames 1: sudo ethtool --show-coalesce eth0: Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 0 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 USB mount point: /media/operator sudo python /home/operator/tmc/scripts/update-cgconfig.py: Total RAM: 16384 MB Utility CG Size: 6553 MB Utility CG VM Size: 6553 MB /etc/cgconfig.conf updated. cgconfigparser successfully loaded /etc/cgconfig.conf eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt eth0 Link encap:Ethernet HWaddr 34:17:eb:d8:83:be inet addr:10.10.10.9 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:55 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:8509 (8.5 KB) Interrupt:20 Memory:f7d00000-f7d20000 eth0 present on machine controller top of pathpilotmanager.py while() loop no update file found /home/operator/tmc/bin/rtapi_app owner: 0, group: 0, mode" 104755 sudo chown root:root /home/operator/tmc/bin/rtapi_app: sudo chmod 4755 /home/operator/tmc/bin/rtapi_app: /home/operator/tmc/bin/rtapi_app owner: 0, group: 0 mode" 104755 done checking rtapi_app permissions Running /home/operator/tmc/python/pplogin/pplogin.py Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. 2024-02-03 08:31:25.121425 | pam module: pam_ce [/home/operator/v2.10.1/python/pplogin/pammgr.py:40] 2024-02-03 08:31:25.371926 CST (+0:00:00.250501) | pam_ce.py:constructor called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:32] 2024-02-03 08:31:25.394000 CST (+0:00:00.022074) | pam_ce.py:login() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:60] 2024-02-03 08:31:25.420970 CST (+0:00:00.026970) | pam_ce.py:shutdown() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:54] Regenerating /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini because its dependent source files may have changed. Generating linuxcnc ini file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini configured INI file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini set_comm_method.py ethernet already setup for machine control by eth0 so not doing anything. Ethernet attached FPGA. [HOSTMOT2]DRIVER_PARAMS: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" params: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" FPGA IP address: 10.10.10.10 ip addr show eth0: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 34:17:eb:d8:83:be brd ff:ff:ff:ff:ff:ff inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever ip addr show eth0 | grep -w eth0:: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 BEFORE disabling autonegotiation for eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes 2024-02-03 08:31:25,869 | INFO | monitor_dir_size | starting with interval 5 minutes [monitor_dir_size.py:124] 2024-02-03 08:31:25,880 | ERROR | monitor_dir_size | du failed with return code 1: /usr/bin/du: cannot access ‘/home/operator/gcode/E-stop Videos’: No such file or directory [monitor_dir_size.py:114] ethtool returned 0 when turning autoneg off Ethernet FPGA not found at IP address 10.10.10.10 /home/operator/v2.10.1/python/pathpilotmanager.py:2604: Warning: Source ID 3 was not found when attempting to remove it glib.source_remove(timeout_id) Ethernet FPGA found at IP 10.10.10.10 FINAL settings for interface eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 2 Transceiver: internal Auto-negotiation: off MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes Supported mesa ethernet boards: 7i97T, 7i97T Mesa board type queried is supported by the config ini file so continuing. Updated ini file with BOARD=7i97T and BITFILE=mesa/7i97t_7i76d.bin ['sudo', '/home/operator/tmc/bin/mesaflash', '--device', '7i97T', '--addr', '10.10.10.10', '--verify', '/home/operator/tmc/mesa/7i97t_7i76d.bin'] Checking file... OK File type: Efinix bin file Verifying FLASH memory sectors starting from 0x100000... |VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV Board configuration verified successfully. mesaflash returned 0 FPGA .bit file programming verified as correct. ifconfig -a -s: Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 2657 0 0 0 5363 0 0 0 BMRU lo 65536 0 46 0 0 0 46 0 0 0 LRU wlan0 1500 0 119 0 15 0 82 0 0 0 BMRU wlan1 1500 0 135 0 0 0 107 0 0 0 BMRU ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 ip addr show wlan0 | grep -w inet: inet 192.168.1.225/24 brd 192.168.1.255 scope global wlan0 ip addr show wlan1 | grep -w inet: inet 192.168.1.226/24 brd 192.168.1.255 scope global wlan1 Data directory /home/operator/mill_data exists ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill'] 2024-02-03 08:31:30.952970 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 08:31:30.957017 CST (+0:00:00.004047) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 08:31:30.957260 CST (+0:00:00.000243) | Scanning mill tool table [scripts/check_machine_tool_table.py:131] 2024-02-03 08:31:30.957519 CST (+0:00:00.000259) | Found existing 1-256 tool.tbl file /home/operator/mill_data/tool.tbl, will migrate data to /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:151] 2024-02-03 08:31:31.007636 CST (+0:00:00.050117) | highest tool number: 1000 [scripts/check_machine_tool_table.py:274] 2024-02-03 08:31:31.007885 CST (+0:00:00.000249) | tool table is already up to date [scripts/check_machine_tool_table.py:278] /home/operator/tmc/python/redis-upgrade.py /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: checking to see if redis rdb file needs to be upgraded to aof redis-upgrade.py: config ini filepath: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: redis is configured for appendonly persistence. redis-upgrade.py: nothing to do. redis-upgrade.py returned 0 About to isolate real time cpu. WARNING: Other partitions exists that might interfere with partitions created by this tool. This might be because you use systemd, which also defines CPU partitions. partrt found at /home/operator/tmc/bin/partrt Found 8 Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz cpus found. cpu_rt_bitmask: 0x80 Creating real time cpu partition with mask: 0x80 /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt create 0x80 /home/operator/tmc/scripts/isolatecpus.py: System was successfylly divided into following partitions: Isolated CPUs (rt):7 Non-isolated CPUS (nrt):0-6 About to run scripts/start_linuxcnc. ------------------------------------------------------------------------------ | start_linuxcnc | ------------------------------------------------------------------------------ prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini expanded INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC version - 2.8.0~pre1 LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python new PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'Basic7i97-1.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator appended to PYTHONPATH: /home/operator/gcode/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library:/home/operator/gcode/python Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= SERVER_PATH=~/tmc/bin/redis-server ~/tmc/bin/redis-server started with tilde SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: '/home/operator/tmc/bin/redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini halcmd -i /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini -f basic7i97.hal basic7i97.hal:8: Ini variable '[KINS]KINEMATICS' not found. HALCMD ini file /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini load failed with config file basic7i97.hal Shutting down and cleaning up LinuxCNC... 2976 Killing linuxcncsvr Killing task linuxcncsvr, PID=2976 PID TTY STAT TIME COMMAND 1880 Killing redis-server Killing task redis-server, PID=1880 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Timeout, trying kill -9 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1880 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Could not kill task redis-server, PID=1880 Stopping realtime threads halcmd stop Unloading hal components halcmd unload all Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done Return code from linuxcnc script: 17 ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill', 'update-256'] 2024-02-03 08:31:36.986265 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 08:31:36.990201 CST (+0:00:00.003936) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 08:31:36.990408 CST (+0:00:00.000207) | Back porting tools 1-256 to old mill tool.tbl file from file: /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:82] 2024-02-03 08:31:36.990626 CST (+0:00:00.000218) | opening file; /home/operator/mill_data/tool.tbl for writing [scripts/check_machine_tool_table.py:91] 2024-02-03 08:31:36.991368 CST (+0:00:00.000742) | stopping at tool 257 [scripts/check_machine_tool_table.py:111] About to undo real time cpu isolation. partrt found at /home/operator/tmc/bin/partrt /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt undo /home/operator/tmc/scripts/isolatecpus.py: System was successfully restored crash detection file unexpectedly exists - sending into config chooser. Running /home/operator/tmc/python/config_chooser/config_chooser.py --ethernet config_chooser.py exiting with code 1 shifttest result is 0 up 1 minute kill -s SIGTERM -2430 /home/operator/operator_login.running: line 198: 2430 Terminated setsid $LOGROTATOR $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" shifttest result is 0 sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux NOT running in virtualized OS environment. --------------------------------------------------------------- New PathPilot start at Sat Feb 3 09:02:51 CST 2024 { "build": 3, "kernels": [ "4.11.9-rt7" ], "status": "", "version": "v2.10.1" } --------------------------------------------------------------- DEBUG not defined so python IS optimizing. Disabling USB autosuspend /home/operator/v2.10.1/venv Entering Python virtual environment shifttest result is 0 starting log rotator setsid /home/operator/v2.10.1/scripts/logrotator.sh 3600 "/home/operator/gcode/logfiles/logrotate.conf" "/home/operator/gcode/logfiles/logrotate.status" LOGROTATOR_PID: 2286 shifttest result is 0 shifttest result is 0 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Changing screen resolution to 1024x768 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Screen resolution is already correct, not changing it. touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 Checking required additional .deb packages are installed Checking for package blt installed package: blt already installed. Checking for proper grub configuration... /etc/default/grub already configured for terminal output = vga_text on boot, no patch needed /etc/default/grub already configured for usbcore.autosuspend=-1, no patch needed Checking for proper samba configuration... Total RAM: 16384 MB /home/operator/tmc/scripts/drop_caches.sh starting . . . xset -dpms: xset s off: touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt /home/operator/dropbox.py not present and executable. Disabling ethernet rx irq coalescing sudo ethtool --coalesce eth0 rx-usecs 0 rx-frames 1: sudo ethtool --show-coalesce eth0: Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 0 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 USB mount point: /media/operator sudo python /home/operator/tmc/scripts/update-cgconfig.py: Total RAM: 16384 MB Utility CG Size: 6553 MB Utility CG VM Size: 6553 MB /etc/cgconfig.conf updated. cgconfigparser successfully loaded /etc/cgconfig.conf eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt eth0 Link encap:Ethernet HWaddr 34:17:eb:d8:83:be inet addr:10.10.10.9 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:55 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:8509 (8.5 KB) Interrupt:20 Memory:f7d00000-f7d20000 eth0 present on machine controller top of pathpilotmanager.py while() loop no update file found /home/operator/tmc/bin/rtapi_app owner: 0, group: 0, mode" 104755 sudo chown root:root /home/operator/tmc/bin/rtapi_app: sudo chmod 4755 /home/operator/tmc/bin/rtapi_app: /home/operator/tmc/bin/rtapi_app owner: 0, group: 0 mode" 104755 done checking rtapi_app permissions Running /home/operator/tmc/python/pplogin/pplogin.py Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. 2024-02-03 09:03:08.413865 | pam module: pam_ce [/home/operator/v2.10.1/python/pplogin/pammgr.py:40] 2024-02-03 09:03:08.712224 CST (+0:00:00.298359) | pam_ce.py:constructor called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:32] 2024-02-03 09:03:08.753125 CST (+0:00:00.040901) | pam_ce.py:login() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:60] 2024-02-03 09:03:08.753851 CST (+0:00:00.000726) | pam_ce.py:shutdown() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:54] Regenerating /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini because its dependent source files may have changed. Generating linuxcnc ini file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini configured INI file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini set_comm_method.py ethernet already setup for machine control by eth0 so not doing anything. Ethernet attached FPGA. [HOSTMOT2]DRIVER_PARAMS: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" params: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" FPGA IP address: 10.10.10.10 ip addr show eth0: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 34:17:eb:d8:83:be brd ff:ff:ff:ff:ff:ff inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever ip addr show eth0 | grep -w eth0:: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 BEFORE disabling autonegotiation for eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes ethtool returned 0 when turning autoneg off 2024-02-03 09:03:09,663 | INFO | monitor_dir_size | starting with interval 5 minutes [monitor_dir_size.py:124] 2024-02-03 09:03:09,705 | ERROR | monitor_dir_size | du failed with return code 1: /usr/bin/du: cannot access ‘/home/operator/gcode/E-stop Videos’: No such file or directory [monitor_dir_size.py:114] Ethernet FPGA not found at IP address 10.10.10.10 /home/operator/v2.10.1/python/pathpilotmanager.py:2604: Warning: Source ID 3 was not found when attempting to remove it glib.source_remove(timeout_id) Ethernet FPGA found at IP 10.10.10.10 FINAL settings for interface eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 2 Transceiver: internal Auto-negotiation: off MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes Supported mesa ethernet boards: 7i97T, 7i97T Mesa board type queried is supported by the config ini file so continuing. Updated ini file with BOARD=7i97T and BITFILE=mesa/7i97t_7i76d.bin ['sudo', '/home/operator/tmc/bin/mesaflash', '--device', '7i97T', '--addr', '10.10.10.10', '--verify', '/home/operator/tmc/mesa/7i97t_7i76d.bin'] Checking file... OK File type: Efinix bin file Verifying FLASH memory sectors starting from 0x100000... |VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV Board configuration verified successfully. mesaflash returned 0 FPGA .bit file programming verified as correct. ifconfig -a -s: Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 2657 0 0 0 5363 0 0 0 BMRU lo 65536 0 36 0 0 0 36 0 0 0 LRU wlan0 1500 0 73 0 0 0 8 0 0 0 BMRU wlan1 1500 0 96 0 20 0 55 0 0 0 BMRU ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 Failed to get IP address for interface wlan0 Found spare network interface that does not have an ip address: wlan0 Running /home/operator/tmc/python/netconfig/netconfig.py Data directory /home/operator/mill_data exists ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill'] 2024-02-03 09:03:32.551926 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 09:03:32.555999 CST (+0:00:00.004073) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 09:03:32.556265 CST (+0:00:00.000266) | Scanning mill tool table [scripts/check_machine_tool_table.py:131] 2024-02-03 09:03:32.556527 CST (+0:00:00.000262) | Found existing 1-256 tool.tbl file /home/operator/mill_data/tool.tbl, will migrate data to /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:151] 2024-02-03 09:03:32.615026 CST (+0:00:00.058499) | highest tool number: 1000 [scripts/check_machine_tool_table.py:274] 2024-02-03 09:03:32.615273 CST (+0:00:00.000247) | tool table is already up to date [scripts/check_machine_tool_table.py:278] /home/operator/tmc/python/redis-upgrade.py /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: checking to see if redis rdb file needs to be upgraded to aof redis-upgrade.py: config ini filepath: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: redis is configured for appendonly persistence. redis-upgrade.py: nothing to do. redis-upgrade.py returned 0 About to isolate real time cpu. WARNING: Other partitions exists that might interfere with partitions created by this tool. This might be because you use systemd, which also defines CPU partitions. partrt found at /home/operator/tmc/bin/partrt Found 8 Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz cpus found. cpu_rt_bitmask: 0x80 Creating real time cpu partition with mask: 0x80 /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt create 0x80 /home/operator/tmc/scripts/isolatecpus.py: System was successfylly divided into following partitions: Isolated CPUs (rt):7 Non-isolated CPUS (nrt):0-6 About to run scripts/start_linuxcnc. ------------------------------------------------------------------------------ | start_linuxcnc | ------------------------------------------------------------------------------ prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini expanded INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC version - 2.8.0~pre1 LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python new PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'Basic7i97-1.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator appended to PYTHONPATH: /home/operator/gcode/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library:/home/operator/gcode/python Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= SERVER_PATH=~/tmc/bin/redis-server ~/tmc/bin/redis-server started with tilde SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: '/home/operator/tmc/bin/redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini halcmd -i /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini -f basic7i97.hal Note: Using POSIX realtime number of cpus found: 8 wrote rtapi_app pid 3210 to /sys/fs/cgroup/cpuset/rt/tasks hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.3 iptables: No chain/target/match by that name. hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:17:80:02 hm2_eth: Unrecognized ethernet board found: 7I97T -- port names will be wrong hm2_eth: discovered 7I97T hm2/hm2_7i97.0: Smart Serial Firmware Version 43 Board hm2_7i97.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i97.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i97.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i97.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i97.0: inconsistent Module Descriptor for PWMGen, not loading driver hm2/hm2_7i97.0: Version = 1, expected 0 hm2/hm2_7i97.0: NumRegisters = 5, expected 5 hm2/hm2_7i97.0: InstanceStride = 0x00000004, expected 0x00000004 hm2/hm2_7i97.0: MultipleRegisters = 0x00000003, expected 0x00000003 hm2/hm2_7i97.0: inconsistent Module Descriptor! hm2/hm2_7i97.0: failed to parse Module Descriptor 7 board fails HM2 registration hm2_eth: rtapi_app_main: Invalid argument (-22) basic7i97.hal:11: waitpid failed /home/operator/tmc/bin/rtapi_app hm2_eth basic7i97.hal:11: /home/operator/tmc/bin/rtapi_app exited without becoming ready basic7i97.hal:11: insmod for hm2_eth failed, returned -1 HALCMD ini file /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini load failed with config file basic7i97.hal Shutting down and cleaning up LinuxCNC... 3145 Killing linuxcncsvr Killing task linuxcncsvr, PID=3145 PID TTY STAT TIME COMMAND 1802 Killing redis-server Killing task redis-server, PID=1802 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Timeout, trying kill -9 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1802 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Could not kill task redis-server, PID=1802 Stopping realtime threads halcmd stop Unloading hal components halcmd unload all hm2: unloading Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done Return code from linuxcnc script: 17 ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill', 'update-256'] 2024-02-03 09:03:39.803353 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 09:03:39.807414 CST (+0:00:00.004061) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 09:03:39.807635 CST (+0:00:00.000221) | Back porting tools 1-256 to old mill tool.tbl file from file: /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:82] 2024-02-03 09:03:39.807871 CST (+0:00:00.000236) | opening file; /home/operator/mill_data/tool.tbl for writing [scripts/check_machine_tool_table.py:91] 2024-02-03 09:03:39.808589 CST (+0:00:00.000718) | stopping at tool 257 [scripts/check_machine_tool_table.py:111] About to undo real time cpu isolation. partrt found at /home/operator/tmc/bin/partrt /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt undo /home/operator/tmc/scripts/isolatecpus.py: System was successfully restored crash detection file unexpectedly exists - sending into config chooser. Running /home/operator/tmc/python/config_chooser/config_chooser.py --ethernet config_chooser.py exiting with code 1 shifttest result is 1 starting panel '/usr/bin/mate-panel' --------------------------------------------------------------- New PathPilot start at Sat Feb 3 16:57:05 CST 2024 { "build": 3, "kernels": [ "4.11.9-rt7" ], "status": "", "version": "v2.10.1" } --------------------------------------------------------------- DEBUG not defined so python IS optimizing. Disabling USB autosuspend /home/operator/v2.10.1/venv Entering Python virtual environment shifttest result is 0 starting log rotator setsid /home/operator/v2.10.1/scripts/logrotator.sh 3600 "/home/operator/gcode/logfiles/logrotate.conf" "/home/operator/gcode/logfiles/logrotate.status" LOGROTATOR_PID: 2334 shifttest result is 0 shifttest result is 0 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Changing screen resolution to 1024x768 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Screen resolution is already correct, not changing it. touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 Checking required additional .deb packages are installed Checking for package blt installed package: blt already installed. Checking for proper grub configuration... /etc/default/grub already configured for terminal output = vga_text on boot, no patch needed /etc/default/grub already configured for usbcore.autosuspend=-1, no patch needed Checking for proper samba configuration... Total RAM: 16384 MB /home/operator/tmc/scripts/drop_caches.sh starting . . . xset -dpms: xset s off: touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt /home/operator/dropbox.py not present and executable. Disabling ethernet rx irq coalescing sudo ethtool --coalesce eth0 rx-usecs 0 rx-frames 1: sudo ethtool --show-coalesce eth0: Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 0 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 USB mount point: /media/operator sudo python /home/operator/tmc/scripts/update-cgconfig.py: Total RAM: 16384 MB Utility CG Size: 6553 MB Utility CG VM Size: 6553 MB /etc/cgconfig.conf updated. cgconfigparser successfully loaded /etc/cgconfig.conf eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt eth0 Link encap:Ethernet HWaddr 34:17:eb:d8:83:be inet addr:10.10.10.9 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:55 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:8509 (8.5 KB) Interrupt:20 Memory:f7d00000-f7d20000 eth0 present on machine controller top of pathpilotmanager.py while() loop no update file found /home/operator/tmc/bin/rtapi_app owner: 0, group: 0, mode" 104755 sudo chown root:root /home/operator/tmc/bin/rtapi_app: sudo chmod 4755 /home/operator/tmc/bin/rtapi_app: /home/operator/tmc/bin/rtapi_app owner: 0, group: 0 mode" 104755 done checking rtapi_app permissions Running /home/operator/tmc/python/pplogin/pplogin.py Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. 2024-02-03 16:57:22.709801 | pam module: pam_ce [/home/operator/v2.10.1/python/pplogin/pammgr.py:40] 2024-02-03 16:57:22.938096 CST (+0:00:00.228295) | pam_ce.py:constructor called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:32] 2024-02-03 16:57:22.960207 CST (+0:00:00.022111) | pam_ce.py:login() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:60] 2024-02-03 16:57:22.960929 CST (+0:00:00.000722) | pam_ce.py:shutdown() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:54] Regenerating /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini because its dependent source files may have changed. Generating linuxcnc ini file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini configured INI file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini set_comm_method.py ethernet already setup for machine control by eth0 so not doing anything. Ethernet attached FPGA. [HOSTMOT2]DRIVER_PARAMS: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" params: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" FPGA IP address: 10.10.10.10 ip addr show eth0: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 34:17:eb:d8:83:be brd ff:ff:ff:ff:ff:ff inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever ip addr show eth0 | grep -w eth0:: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 BEFORE disabling autonegotiation for eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes 2024-02-03 16:57:23,469 | INFO | monitor_dir_size | starting with interval 5 minutes [monitor_dir_size.py:124] ethtool returned 0 when turning autoneg off 2024-02-03 16:57:23,480 | ERROR | monitor_dir_size | du failed with return code 1: /usr/bin/du: cannot access ‘/home/operator/gcode/E-stop Videos’: No such file or directory [monitor_dir_size.py:114] Ethernet FPGA not found at IP address 10.10.10.10 /home/operator/v2.10.1/python/pathpilotmanager.py:2604: Warning: Source ID 3 was not found when attempting to remove it glib.source_remove(timeout_id) Ethernet FPGA found at IP 10.10.10.10 FINAL settings for interface eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 2 Transceiver: internal Auto-negotiation: off MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes Supported mesa ethernet boards: 7i97T, 7i97T Mesa board type queried is supported by the config ini file so continuing. Updated ini file with BOARD=7i97T and BITFILE=mesa/7i97t_7i76d.bin ['sudo', '/home/operator/tmc/bin/mesaflash', '--device', '7i97T', '--addr', '10.10.10.10', '--verify', '/home/operator/tmc/mesa/7i97t_7i76d.bin'] Checking file... OK File type: Efinix bin file Verifying FLASH memory sectors starting from 0x100000... |VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV Board configuration verified successfully. mesaflash returned 0 FPGA .bit file programming verified as correct. ifconfig -a -s: Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 2657 0 0 0 5363 0 0 0 BMRU lo 65536 0 37 0 0 0 37 0 0 0 LRU wlan0 1500 0 67 0 0 0 37 0 0 0 BMRU wlan1 1500 0 72 0 10 0 26 0 0 0 BMRU ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 ip addr show wlan0 | grep -w inet: inet 192.168.1.225/24 brd 192.168.1.255 scope global wlan0 ip addr show wlan1 | grep -w inet: inet 192.168.1.226/24 brd 192.168.1.255 scope global wlan1 Data directory /home/operator/mill_data exists ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill'] 2024-02-03 16:57:28.552339 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 16:57:28.556351 CST (+0:00:00.004012) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 16:57:28.556580 CST (+0:00:00.000229) | Scanning mill tool table [scripts/check_machine_tool_table.py:131] 2024-02-03 16:57:28.556816 CST (+0:00:00.000236) | Found existing 1-256 tool.tbl file /home/operator/mill_data/tool.tbl, will migrate data to /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:151] 2024-02-03 16:57:28.589352 CST (+0:00:00.032536) | highest tool number: 1000 [scripts/check_machine_tool_table.py:274] 2024-02-03 16:57:28.589595 CST (+0:00:00.000243) | tool table is already up to date [scripts/check_machine_tool_table.py:278] /home/operator/tmc/python/redis-upgrade.py /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: checking to see if redis rdb file needs to be upgraded to aof redis-upgrade.py: config ini filepath: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: redis is configured for appendonly persistence. redis-upgrade.py: nothing to do. redis-upgrade.py returned 0 About to isolate real time cpu. WARNING: Other partitions exists that might interfere with partitions created by this tool. This might be because you use systemd, which also defines CPU partitions. partrt found at /home/operator/tmc/bin/partrt Found 8 Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz cpus found. cpu_rt_bitmask: 0x80 Creating real time cpu partition with mask: 0x80 /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt create 0x80 /home/operator/tmc/scripts/isolatecpus.py: System was successfylly divided into following partitions: Isolated CPUs (rt):7 Non-isolated CPUS (nrt):0-6 About to run scripts/start_linuxcnc. ------------------------------------------------------------------------------ | start_linuxcnc | ------------------------------------------------------------------------------ prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini expanded INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC version - 2.8.0~pre1 LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python new PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'Basic7i97-1.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator appended to PYTHONPATH: /home/operator/gcode/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library:/home/operator/gcode/python Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= SERVER_PATH=~/tmc/bin/redis-server ~/tmc/bin/redis-server started with tilde SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: '/home/operator/tmc/bin/redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini halcmd -i /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini -f basic7i97.hal Note: Using POSIX realtime number of cpus found: 8 wrote rtapi_app pid 2978 to /sys/fs/cgroup/cpuset/rt/tasks hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.3 iptables: No chain/target/match by that name. hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:17:80:02 hm2_eth: Unrecognized ethernet board found: 7I97T -- port names will be wrong hm2_eth: discovered 7I97T hm2/hm2_7i97.0: Smart Serial Firmware Version 43 Board hm2_7i97.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i97.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i97.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i97.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i97.0: inconsistent Module Descriptor for PWMGen, not loading driver hm2/hm2_7i97.0: Version = 1, expected 0 hm2/hm2_7i97.0: NumRegisters = 5, expected 5 hm2/hm2_7i97.0: InstanceStride = 0x00000004, expected 0x00000004 hm2/hm2_7i97.0: MultipleRegisters = 0x00000003, expected 0x00000003 hm2/hm2_7i97.0: inconsistent Module Descriptor! hm2/hm2_7i97.0: failed to parse Module Descriptor 7 board fails HM2 registration hm2_eth: rtapi_app_main: Invalid argument (-22) basic7i97.hal:11: waitpid failed /home/operator/tmc/bin/rtapi_app hm2_eth basic7i97.hal:11: /home/operator/tmc/bin/rtapi_app exited without becoming ready basic7i97.hal:11: insmod for hm2_eth failed, returned -1 HALCMD ini file /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini load failed with config file basic7i97.hal Shutting down and cleaning up LinuxCNC... 2967 Killing linuxcncsvr Killing task linuxcncsvr, PID=2967 PID TTY STAT TIME COMMAND 1867 Killing redis-server Killing task redis-server, PID=1867 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Timeout, trying kill -9 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1867 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Could not kill task redis-server, PID=1867 Stopping realtime threads halcmd stop Unloading hal components halcmd unload all hm2: unloading Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done Return code from linuxcnc script: 17 ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill', 'update-256'] 2024-02-03 16:57:35.851124 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 16:57:35.855193 CST (+0:00:00.004069) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 16:57:35.855402 CST (+0:00:00.000209) | Back porting tools 1-256 to old mill tool.tbl file from file: /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:82] 2024-02-03 16:57:35.855623 CST (+0:00:00.000221) | opening file; /home/operator/mill_data/tool.tbl for writing [scripts/check_machine_tool_table.py:91] 2024-02-03 16:57:35.856324 CST (+0:00:00.000701) | stopping at tool 257 [scripts/check_machine_tool_table.py:111] About to undo real time cpu isolation. partrt found at /home/operator/tmc/bin/partrt /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt undo /home/operator/tmc/scripts/isolatecpus.py: System was successfully restored crash detection file unexpectedly exists - sending into config chooser. Running /home/operator/tmc/python/config_chooser/config_chooser.py --ethernet config_chooser.py exiting with code 1 shifttest result is 1 starting panel '/usr/bin/mate-panel' --------------------------------------------------------------- New PathPilot start at Sat Feb 3 17:05:11 CST 2024 { "build": 3, "kernels": [ "4.11.9-rt7" ], "status": "", "version": "v2.10.1" } --------------------------------------------------------------- DEBUG not defined so python IS optimizing. Disabling USB autosuspend /home/operator/v2.10.1/venv Entering Python virtual environment shifttest result is 0 starting log rotator setsid /home/operator/v2.10.1/scripts/logrotator.sh 3600 "/home/operator/gcode/logfiles/logrotate.conf" "/home/operator/gcode/logfiles/logrotate.status" LOGROTATOR_PID: 2426 shifttest result is 0 shifttest result is 0 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Changing screen resolution to 1024x768 up Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. sudo dmidecode -s system-product-name: OptiPlex 9020M uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/lib/python/support appending: /home/operator/tmc/python/config_chooser appending: /home/operator/tmc/python/pplogin appending: /home/operator/tmc/python/pp_hub appending: /home/operator/tmc/python/shape_library PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC 0Y5DDC Portrait mode console not detected Desired screen setup (pre-rotation) is: (1024, 768, 'normal') ['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 476mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 59.8 1280x720 60.0 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Primary output has name HDMI1 and rotation normal Screen rotation is already correct, not changing it. Screen resolution is already correct, not changing it. touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 Checking required additional .deb packages are installed Checking for package blt installed package: blt already installed. Checking for proper grub configuration... /etc/default/grub already configured for terminal output = vga_text on boot, no patch needed /etc/default/grub already configured for usbcore.autosuspend=-1, no patch needed Checking for proper samba configuration... Total RAM: 16384 MB /home/operator/tmc/scripts/drop_caches.sh starting . . . xset -dpms: xset s off: touchscreen.py: touchscreen devices detected: [] touchscreen.py ending with code 1 eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt /home/operator/dropbox.py not present and executable. Disabling ethernet rx irq coalescing sudo ethtool --coalesce eth0 rx-usecs 0 rx-frames 1: sudo ethtool --show-coalesce eth0: Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 0 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 USB mount point: /media/operator sudo python /home/operator/tmc/scripts/update-cgconfig.py: Total RAM: 16384 MB Utility CG Size: 6553 MB Utility CG VM Size: 6553 MB /etc/cgconfig.conf updated. cgconfigparser successfully loaded /etc/cgconfig.conf eula.py: no need to display eula and get acceptance because marker file already exists /home/operator/tmc/eula_agreed.txt eth0 Link encap:Ethernet HWaddr 34:17:eb:d8:83:be inet addr:10.10.10.9 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:55 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:8509 (8.5 KB) Interrupt:20 Memory:f7d00000-f7d20000 eth0 present on machine controller top of pathpilotmanager.py while() loop no update file found /home/operator/tmc/bin/rtapi_app owner: 0, group: 0, mode" 104755 sudo chown root:root /home/operator/tmc/bin/rtapi_app: sudo chmod 4755 /home/operator/tmc/bin/rtapi_app: /home/operator/tmc/bin/rtapi_app owner: 0, group: 0 mode" 104755 done checking rtapi_app permissions Running /home/operator/tmc/python/pplogin/pplogin.py Using locale ('en_US', 'UTF-8') Using locale ('en_US', 'UTF-8') for string resources Localization strings properly initialized. 2024-02-03 17:05:28.727253 | pam module: pam_ce [/home/operator/v2.10.1/python/pplogin/pammgr.py:40] 2024-02-03 17:05:29.058953 CST (+0:00:00.331700) | pam_ce.py:constructor called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:32] 2024-02-03 17:05:29.089108 CST (+0:00:00.030155) | pam_ce.py:login() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:60] 2024-02-03 17:05:29.090058 CST (+0:00:00.000950) | pam_ce.py:shutdown() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:54] Regenerating /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini because its dependent source files may have changed. Generating linuxcnc ini file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini configured INI file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini set_comm_method.py ethernet already setup for machine control by eth0 so not doing anything. Ethernet attached FPGA. [HOSTMOT2]DRIVER_PARAMS: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" params: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5" FPGA IP address: 10.10.10.10 ip addr show eth0: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 34:17:eb:d8:83:be brd ff:ff:ff:ff:ff:ff inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever ip addr show eth0 | grep -w eth0:: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 BEFORE disabling autonegotiation for eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes ethtool returned 0 when turning autoneg off 2024-02-03 17:05:30,076 | INFO | monitor_dir_size | starting with interval 5 minutes [monitor_dir_size.py:124] 2024-02-03 17:05:30,129 | ERROR | monitor_dir_size | du failed with return code 1: /usr/bin/du: cannot access ‘/home/operator/gcode/E-stop Videos’: No such file or directory [monitor_dir_size.py:114] Ethernet FPGA not found at IP address 10.10.10.10 /home/operator/v2.10.1/python/pathpilotmanager.py:2604: Warning: Source ID 3 was not found when attempting to remove it glib.source_remove(timeout_id) Ethernet FPGA found at IP 10.10.10.10 FINAL settings for interface eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 2 Transceiver: internal Auto-negotiation: off MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes Supported mesa ethernet boards: 7i97T, 7i97T Mesa board type queried is supported by the config ini file so continuing. Updated ini file with BOARD=7i97T and BITFILE=mesa/7i97t_7i76d.bin ['sudo', '/home/operator/tmc/bin/mesaflash', '--device', '7i97T', '--addr', '10.10.10.10', '--verify', '/home/operator/tmc/mesa/7i97t_7i76d.bin'] Checking file... OK File type: Efinix bin file Verifying FLASH memory sectors starting from 0x100000... |VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV Board configuration verified successfully. mesaflash returned 0 FPGA .bit file programming verified as correct. ifconfig -a -s: Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 2657 0 0 0 5363 0 0 0 BMRU lo 65536 0 36 0 0 0 36 0 0 0 LRU wlan0 1500 0 43 0 0 0 8 0 0 0 BMRU wlan1 1500 0 110 0 6 0 104 0 0 0 BMRU ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 Failed to get IP address for interface wlan0 Found spare network interface that does not have an ip address: wlan0 Data directory /home/operator/mill_data exists ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill'] 2024-02-03 17:05:44.743432 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 17:05:44.747525 CST (+0:00:00.004093) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 17:05:44.747751 CST (+0:00:00.000226) | Scanning mill tool table [scripts/check_machine_tool_table.py:131] 2024-02-03 17:05:44.747986 CST (+0:00:00.000235) | Found existing 1-256 tool.tbl file /home/operator/mill_data/tool.tbl, will migrate data to /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:151] 2024-02-03 17:05:44.783850 CST (+0:00:00.035864) | highest tool number: 1000 [scripts/check_machine_tool_table.py:274] 2024-02-03 17:05:44.784110 CST (+0:00:00.000260) | tool table is already up to date [scripts/check_machine_tool_table.py:278] /home/operator/tmc/python/redis-upgrade.py /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: checking to see if redis rdb file needs to be upgraded to aof redis-upgrade.py: config ini filepath: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini redis-upgrade.py: redis is configured for appendonly persistence. redis-upgrade.py: nothing to do. redis-upgrade.py returned 0 About to isolate real time cpu. WARNING: Other partitions exists that might interfere with partitions created by this tool. This might be because you use systemd, which also defines CPU partitions. partrt found at /home/operator/tmc/bin/partrt Found 8 Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz cpus found. cpu_rt_bitmask: 0x80 Creating real time cpu partition with mask: 0x80 /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt create 0x80 /home/operator/tmc/scripts/isolatecpus.py: System was successfylly divided into following partitions: Isolated CPUs (rt):7 Non-isolated CPUS (nrt):0-6 About to run scripts/start_linuxcnc. ------------------------------------------------------------------------------ | start_linuxcnc | ------------------------------------------------------------------------------ prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini expanded INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC version - 2.8.0~pre1 LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python new PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'Basic7i97-1.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator appended to PYTHONPATH: /home/operator/gcode/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library:/home/operator/gcode/python Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= SERVER_PATH=~/tmc/bin/redis-server ~/tmc/bin/redis-server started with tilde SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: '/home/operator/tmc/bin/redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini halcmd -i /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini -f basic7i97.hal Note: Using POSIX realtime number of cpus found: 8 wrote rtapi_app pid 2924 to /sys/fs/cgroup/cpuset/rt/tasks hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.3 iptables: No chain/target/match by that name. hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:17:80:02 hm2_eth: Unrecognized ethernet board found: 7I97T -- port names will be wrong hm2_eth: discovered 7I97T hm2/hm2_7i97.0: Smart Serial Firmware Version 43 Board hm2_7i97.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i97.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i97.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i97.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i97.0: inconsistent Module Descriptor for PWMGen, not loading driver hm2/hm2_7i97.0: Version = 1, expected 0 hm2/hm2_7i97.0: NumRegisters = 5, expected 5 hm2/hm2_7i97.0: InstanceStride = 0x00000004, expected 0x00000004 hm2/hm2_7i97.0: MultipleRegisters = 0x00000003, expected 0x00000003 hm2/hm2_7i97.0: inconsistent Module Descriptor! hm2/hm2_7i97.0: failed to parse Module Descriptor 7 board fails HM2 registration hm2_eth: rtapi_app_main: Invalid argument (-22) basic7i97.hal:11: waitpid failed /home/operator/tmc/bin/rtapi_app hm2_eth basic7i97.hal:11: /home/operator/tmc/bin/rtapi_app exited without becoming ready basic7i97.hal:11: insmod for hm2_eth failed, returned -1 HALCMD ini file /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini load failed with config file basic7i97.hal Shutting down and cleaning up LinuxCNC... 2913 Killing linuxcncsvr Killing task linuxcncsvr, PID=2913 PID TTY STAT TIME COMMAND 1805 Killing redis-server Killing task redis-server, PID=1805 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Timeout, trying kill -9 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 PID TTY STAT TIME COMMAND 1805 ? Ssl 0:00 /usr/bin/redis-server 127.0.0.1:6379 Could not kill task redis-server, PID=1805 Stopping realtime threads halcmd stop Unloading hal components halcmd unload all hm2: unloading Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done Return code from linuxcnc script: 17 ['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill', 'update-256'] 2024-02-03 17:05:51.980783 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388] 2024-02-03 17:05:51.984849 CST (+0:00:00.004066) | machine type is mill [scripts/check_machine_tool_table.py:389] 2024-02-03 17:05:51.985062 CST (+0:00:00.000213) | Back porting tools 1-256 to old mill tool.tbl file from file: /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:82] 2024-02-03 17:05:51.985284 CST (+0:00:00.000222) | opening file; /home/operator/mill_data/tool.tbl for writing [scripts/check_machine_tool_table.py:91] 2024-02-03 17:05:51.986524 CST (+0:00:00.001240) | stopping at tool 257 [scripts/check_machine_tool_table.py:111] About to undo real time cpu isolation. partrt found at /home/operator/tmc/bin/partrt /home/operator/tmc/scripts/isolatecpus.py: sudo env "PATH=$PATH" partrt undo /home/operator/tmc/scripts/isolatecpus.py: System was successfully restored crash detection file unexpectedly exists - sending into config chooser. Running /home/operator/tmc/python/config_chooser/config_chooser.py --ethernet config_chooser.py exiting with code 1 shifttest result is 1 starting panel '/usr/bin/mate-panel' [3252:3252:0203/170612.536596:ERROR:browser_dm_token_storage_linux.cc(94)] Error: /etc/machine-id contains 0 characters (32 were expected). Fontconfig warning: "/etc/fonts/fonts.conf", line 86: unknown element "blank" [3252:3842:0203/202059.916485:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.919324:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.925048:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.929496:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.932445:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.934970:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.935126:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.937773:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.940681:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:3842:0203/202059.941713:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.829947:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.829993:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830022:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830048:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830072:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830097:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830122:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830148:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830177:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830245:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830280:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830338:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830380:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830411:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830444:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830478:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830530:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830565:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830704:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830735:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830761:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830784:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830808:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830825:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830839:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830853:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830867:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830881:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830896:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830910:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830924:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830938:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830952:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830967:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830981:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.830997:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831011:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831025:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831039:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831053:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831067:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831081:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831095:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831109:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831123:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831137:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831152:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831166:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831180:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831194:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831208:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831222:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831237:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831251:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831265:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831279:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831293:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831307:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831321:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831335:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831349:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831363:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831378:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831392:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831406:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831420:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831433:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831449:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831463:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831476:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831490:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831504:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831518:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831534:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831548:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831562:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831576:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831590:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831604:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831618:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831632:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831646:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831660:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831674:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831693:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831717:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831740:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831764:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831787:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831812:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831833:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831855:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831879:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831906:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831935:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831962:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.831987:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832011:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832037:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832088:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832119:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832145:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832174:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832202:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832228:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832253:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832278:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832303:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832327:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832353:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832376:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832400:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832424:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832448:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832474:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832498:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832522:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832547:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832572:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832596:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832621:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832645:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=? [3252:7674:0203/202105.832668:ERROR:database.cc(1674)] Passwords SQLite error: code 2067 errno 0: UNIQUE constraint failed: insecure_credentials.parent_id, insecure_credentials.insecurity_type sql: INSERT INTO insecure_credentials (parent_id, insecurity_type, create_time, is_muted) SELECT id, ?, ?, ? FROM logins WHERE signon_realm=? AND username_value=?