%
( AXIS "splash g-code" Not intended for actual milling )
(Z axis)
( depending on your setup. As if you had some material in your mill... )
(Z axis down a bit then touch off )
( Also press the Toggle Skip Lines with "/" to see that part )
( If the program is too big or small for your machine, change the scale below )
( LinuxCNC 19/1/2012 2:13:51 PM )
#<depth>=2.0
#<scale>=1.0
G21 G90 G64 G40
 M0G0 (Z3.0)
( engraving )
G17
M3 S10000
G0 X[1.75781*#<scale>] Y[0.5*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G1 F400.0 X[5.95508*#<scale>] Y[20.54297*#<scale>]
G1 X[10.07031*#<scale>]
G1 X[6.58398*#<scale>] Y[3.84961*#<scale>]
G1 X[16.7832*#<scale>]
G1 X[16.08594*#<scale>] Y[0.5*#<scale>]
G1 X[1.75781*#<scale>]
 M0G0 (Z3.0)
G0 X[18.72461*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G1 F400.0 X[21.75977*#<scale>] Y[15.01953*#<scale>]
G1 X[25.68359*#<scale>]
G1 X[22.64844*#<scale>] Y[0.5*#<scale>]
G1 X[18.72461*#<scale>]
 M0G0 (Z3.0)
G0 X[26.55859*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G1 F400.0 X[29.59375*#<scale>] Y[15.01953*#<scale>]
G1 X[33.3125*#<scale>]
G1 X[32.92969*#<scale>] Y[13.13281*#<scale>]
G2 X[34.16342*#<scale>] Y[14.08624*#<scale>] I[8.82141*#<scale>] J[-10.13994*#<scale>]
G2 X[35.52734*#<scale>] Y[14.8418*#<scale>] I[4.53823*#<scale>] J[-6.58354*#<scale>]
G2 X[38.08398*#<scale>] Y[15.36133*#<scale>] I[2.53506*#<scale>] J[-5.9247*#<scale>]
G2 X[39.5966*#<scale>] Y[15.13543*#<scale>] I[0.06403*#<scale>] J[-4.74845*#<scale>]
G2 X[40.90039*#<scale>] Y[14.33594*#<scale>] I[-1.02874*#<scale>] J[-3.14049*#<scale>]
G2 X[41.7019*#<scale>] Y[13.08328*#<scale>] I[-2.33045*#<scale>] J[-2.37388*#<scale>]
G2 X[41.93945*#<scale>] Y[11.61523*#<scale>] I[-4.07102*#<scale>] J[-1.41199*#<scale>]
G2 X[41.76899*#<scale>] Y[10.15744*#<scale>] I[-10.17473*#<scale>] J[0.45091*#<scale>]
G2 X[41.48828*#<scale>] Y[8.7168*#<scale>] I[-39.45138*#<scale>] J[6.93932*#<scale>]
G1 X[39.7793*#<scale>] Y[0.5*#<scale>]
G1 X[35.85547*#<scale>]
G1 X[37.57813*#<scale>] Y[8.74414*#<scale>]
G3 X[37.79665*#<scale>] Y[9.84001*#<scale>] I[-62.81729*#<scale>] J[13.09579*#<scale>]
G3 X[37.96094*#<scale>] Y[10.94531*#<scale>] I[-9.6524*#<scale>] J[1.99958*#<scale>]
G3 X[37.50977*#<scale>] Y[12.12109*#<scale>] I[-1.54162*#<scale>] J[0.0829*#<scale>]
G3 X[36.2793*#<scale>] Y[12.55859*#<scale>] I[-1.13356*#<scale>] J[-1.23903*#<scale>]
G3 X[35.26888*#<scale>] Y[12.33731*#<scale>] I[0.05277*#<scale>] J[-2.65845*#<scale>]
G3 X[34.36523*#<scale>] Y[11.83398*#<scale>] I[1.956*#<scale>] J[-4.57455*#<scale>]
G3 X[32.71094*#<scale>] Y[9.91992*#<scale>] I[2.86418*#<scale>] J[-4.1474*#<scale>]
G3 X[32.13267*#<scale>] Y[8.21493*#<scale>] I[8.76492*#<scale>] J[-3.92328*#<scale>]
G3 X[31.72656*#<scale>] Y[6.46094*#<scale>] I[36.34493*#<scale>] J[-9.33906*#<scale>]
G1 X[30.48242*#<scale>] Y[0.5*#<scale>]
G1 X[26.55859*#<scale>]
 M0G0 (Z3.0)
G0 X[26.09375*#<scale>] Y[16.98828*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G1 F400.0 X[22.16992*#<scale>]
G1 X[22.9082*#<scale>] Y[20.54297*#<scale>]
G1 X[26.83203*#<scale>]
G1 X[26.09375*#<scale>] Y[16.98828*#<scale>]
 M0G0 (Z3.0)
G0 X[46.14777*#<scale>] Y[12.78778*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G1 F400.0 X[46.61523*#<scale>] Y[15.01953*#<scale>]
G1 X[50.53906*#<scale>]
G1 X[48.74805*#<scale>] Y[6.41992*#<scale>]
G3 X[48.55485*#<scale>] Y[5.46101*#<scale>] I[39.83359*#<scale>] J[-8.52447*#<scale>]
G3 X[48.41992*#<scale>] Y[4.49219*#<scale>] I[7.34343*#<scale>] J[-1.51652*#<scale>]
G3 X[48.88477*#<scale>] Y[3.41211*#<scale>] I[1.45252*#<scale>] J[-0.01493*#<scale>]
G3 X[50.07422*#<scale>] Y[2.96094*#<scale>] I[1.13093*#<scale>] J[1.18803*#<scale>]
G3 X[51.09961*#<scale>] Y[3.15234*#<scale>] I[-0.00663*#<scale>] J[2.87782*#<scale>]
G3 X[52.13867*#<scale>] Y[3.75391*#<scale>] I[-1.85377*#<scale>] J[4.40013*#<scale>]
G3 X[53.0957*#<scale>] Y[4.68359*#<scale>] I[-3.51724*#<scale>] J[4.57812*#<scale>]
G3 X[53.88867*#<scale>] Y[6.05078*#<scale>] I[-4.71119*#<scale>] J[3.64605*#<scale>]
G3 X[54.44922*#<scale>] Y[8.10156*#<scale>] I[-12.97687*#<scale>] J[4.64901*#<scale>]
G1 X[55.89844*#<scale>] Y[15.01953*#<scale>]
G1 X[59.82227*#<scale>]
G1 X[56.78711*#<scale>] Y[0.5*#<scale>]
G1 X[53.12305*#<scale>]
G1 X[53.5332*#<scale>] Y[2.46875*#<scale>]
G2 X[51.14513*#<scale>] Y[0.79202*#<scale>] I[-6.21919*#<scale>] J[6.3187*#<scale>]
G2 X[48.29688*#<scale>] Y[0.1582*#<scale>] I[-2.84268*#<scale>] J[6.05776*#<scale>]
G2 X[46.78426*#<scale>] Y[0.3841*#<scale>] I[-0.06403*#<scale>] J[4.74845*#<scale>]
G2 X[45.48047*#<scale>] Y[1.18359*#<scale>] I[1.02874*#<scale>] J[3.14049*#<scale>]
G2 X[44.68637*#<scale>] Y[2.45262*#<scale>] I[2.34744*#<scale>] J[2.35189*#<scale>]
G2 X[44.45508*#<scale>] Y[3.93164*#<scale>] I[4.23866*#<scale>] J[1.42044*#<scale>]
G2 X[44.63379*#<scale>] Y[5.43705*#<scale>] I[10.83187*#<scale>] J[-0.52256*#<scale>]
G2 X[44.91992*#<scale>] Y[6.92578*#<scale>] I[45.15644*#<scale>] J[-7.90718*#<scale>]
G1 X[46.14777*#<scale>] Y[12.78778*#<scale>]
 M0G0 (Z3.0)
G0 X[61.99609*#<scale>] Y[15.01953*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G1 F400.0 X[66.16602*#<scale>]
G1 X[68.28516*#<scale>] Y[10.87695*#<scale>]
G1 X[71.96289*#<scale>] Y[15.01953*#<scale>]
G1 X[76.73438*#<scale>]
G1 X[69.99414*#<scale>] Y[7.48633*#<scale>]
G1 X[73.6582*#<scale>] Y[0.5*#<scale>]
G1 X[69.48828*#<scale>]
G1 X[67.39648*#<scale>] Y[4.57422*#<scale>]
G1 X[63.78711*#<scale>] Y[0.5*#<scale>]
G1 X[58.97461*#<scale>]
G1 X[65.6875*#<scale>] Y[7.9375*#<scale>]
G1 X[61.99609*#<scale>] Y[15.01953*#<scale>]
 M0G0 (Z3.0)
G0 X[78.12067*#<scale>] Y[11.80439*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G2 F400.0 X[78.15861*#<scale>] Y[11.98873*#<scale>] I[14.86609*#<scale>] J[-2.96421*#<scale>]
G2 X[79.20898*#<scale>] Y[15.0332*#<scale>] I[13.03118*#<scale>] J[-2.79244*#<scale>]
G2 X[80.8214*#<scale>] Y[17.48665*#<scale>] I[10.09107*#<scale>] J[-4.87534*#<scale>]
G2 X[83.06445*#<scale>] Y[19.38086*#<scale>] I[7.26534*#<scale>] J[-6.32817*#<scale>]
G2 X[88.42383*#<scale>] Y[20.88477*#<scale>] I[5.2993*#<scale>] J[-8.5834*#<scale>]
G2 X[91.21708*#<scale>] Y[20.49528*#<scale>] I[0.10667*#<scale>] J[-9.44597*#<scale>]
G2 X[93.6875*#<scale>] Y[19.13477*#<scale>] I[-1.95281*#<scale>] J[-6.46904*#<scale>]
G2 X[95.32764*#<scale>] Y[16.9908*#<scale>] I[-4.27639*#<scale>] J[-4.97078*#<scale>]
G2 X[96.05273*#<scale>] Y[14.39063*#<scale>] I[-7.426*#<scale>] J[-3.47204*#<scale>]
G1 X[92.10156*#<scale>] Y[14.00781*#<scale>]
G3 X[91.68364*#<scale>] Y[15.38196*#<scale>] I[-5.83945*#<scale>] J[-1.02535*#<scale>]
G3 X[90.83008*#<scale>] Y[16.53711*#<scale>] I[-2.94269*#<scale>] J[-1.28147*#<scale>]
G3 X[89.65745*#<scale>] Y[17.15799*#<scale>] I[-2.02111*#<scale>] J[-2.39937*#<scale>]
G3 X[88.3418*#<scale>] Y[17.33008*#<scale>] I[-1.26203*#<scale>] J[-4.53327*#<scale>]
G3 X[85.14258*#<scale>] Y[16.29102*#<scale>] I[0.01526*#<scale>] J[-5.49164*#<scale>]
G3 X[83.72532*#<scale>] Y[14.83462*#<scale>] I[3.39082*#<scale>] J[-4.71749*#<scale>]
G3 X[82.77734*#<scale>] Y[13.03711*#<scale>] I[7.50088*#<scale>] J[-5.10456*#<scale>]
G3 X[81.88867*#<scale>] Y[8.63477*#<scale>] I[10.80218*#<scale>] J[-4.47143*#<scale>]
G3 X[82.12643*#<scale>] Y[6.67148*#<scale>] I[7.47758*#<scale>] J[-0.09047*#<scale>]
G3 X[83.03711*#<scale>] Y[4.91602*#<scale>] I[4.24649*#<scale>] J[1.08898*#<scale>]
G3 X[85.92188*#<scale>] Y[3.60352*#<scale>] I[2.82627*#<scale>] J[2.38541*#<scale>]
G3 X[88.84766*#<scale>] Y[4.64258*#<scale>] I[0.00074*#<scale>] J[4.63663*#<scale>]
G3 X[90.07896*#<scale>] Y[6.0293*#<scale>] I[-3.23186*#<scale>] J[4.10967*#<scale>]
G3 X[90.84375*#<scale>] Y[7.71875*#<scale>] I[-6.5029*#<scale>] J[3.96159*#<scale>]
G1 X[95.0*#<scale>] Y[7.08984*#<scale>]
G2 X[93.56373*#<scale>] Y[4.23114*#<scale>] I[-11.87256*#<scale>] J[4.17484*#<scale>]
G2 X[91.34961*#<scale>] Y[1.92188*#<scale>] I[-7.88363*#<scale>] J[5.34275*#<scale>]
G2 X[88.64367*#<scale>] Y[0.56922*#<scale>] I[-5.3138*#<scale>] J[7.24715*#<scale>]
G2 X[85.64844*#<scale>] Y[0.14453*#<scale>] I[-2.92298*#<scale>] J[9.84046*#<scale>]
G2 X[82.5341*#<scale>] Y[0.63758*#<scale>] I[-0.13266*#<scale>] J[9.24446*#<scale>]
G2 X[79.89258*#<scale>] Y[2.35938*#<scale>] I[2.19287*#<scale>] J[6.25138*#<scale>]
G2 X[78.25253*#<scale>] Y[5.37699*#<scale>] I[5.36449*#<scale>] J[4.87005*#<scale>]
G2 X[77.82813*#<scale>] Y[8.78516*#<scale>] I[12.16539*#<scale>] J[3.2454*#<scale>]
G2 X[78.12067*#<scale>] Y[11.80439*#<scale>] I[15.15864*#<scale>] J[0.05503*#<scale>]
 M0G0 (Z3.0)
G0 X[98.14159*#<scale>] Y[7.6254*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G1 F400.0 X[100.83789*#<scale>] Y[20.54297*#<scale>]
G1 X[104.69336*#<scale>]
G1 X[110.12109*#<scale>] Y[7.13086*#<scale>]
G1 X[112.92383*#<scale>] Y[20.54297*#<scale>]
G1 X[116.75195*#<scale>]
G1 X[112.56836*#<scale>] Y[0.5*#<scale>]
G1 X[108.72656*#<scale>]
G1 X[103.3125*#<scale>] Y[13.9668*#<scale>]
G1 X[100.49609*#<scale>] Y[0.5*#<scale>]
G1 X[96.6543*#<scale>]
G1 X[98.14159*#<scale>] Y[7.6254*#<scale>]
 M0G0 (Z3.0)
G0 X[118.27432*#<scale>] Y[8.23889*#<scale>]
 M0G1 F100.0 (Z[-#<depth>])
G2 F400.0 X[118.26953*#<scale>] Y[8.78516*#<scale>] I[12.585*#<scale>] J[0.3835*#<scale>]
G2 X[118.60002*#<scale>] Y[11.98873*#<scale>] I[15.15864*#<scale>] J[0.05503*#<scale>]
G2 X[119.65039*#<scale>] Y[15.0332*#<scale>] I[13.03118*#<scale>] J[-2.79244*#<scale>]
G2 X[121.26281*#<scale>] Y[17.48665*#<scale>] I[10.09107*#<scale>] J[-4.87534*#<scale>]
G2 X[123.50586*#<scale>] Y[19.38086*#<scale>] I[7.26534*#<scale>] J[-6.32817*#<scale>]
G2 X[128.86523*#<scale>] Y[20.88477*#<scale>] I[5.2993*#<scale>] J[-8.5834*#<scale>]
G2 X[131.65849*#<scale>] Y[20.49528*#<scale>] I[0.10667*#<scale>] J[-9.44597*#<scale>]
G2 X[134.12891*#<scale>] Y[19.13477*#<scale>] I[-1.95281*#<scale>] J[-6.46904*#<scale>]
G2 X[135.76904*#<scale>] Y[16.9908*#<scale>] I[-4.27639*#<scale>] J[-4.97078*#<scale>]
G2 X[136.49414*#<scale>] Y[14.39063*#<scale>] I[-7.426*#<scale>] J[-3.47204*#<scale>]
G1 X[132.54297*#<scale>] Y[14.00781*#<scale>]
G3 X[132.12504*#<scale>] Y[15.38196*#<scale>] I[-5.83945*#<scale>] J[-1.02535*#<scale>]
G3 X[131.27148*#<scale>] Y[16.53711*#<scale>] I[-2.94269*#<scale>] J[-1.28147*#<scale>]
G3 X[130.09886*#<scale>] Y[17.15799*#<scale>] I[-2.02111*#<scale>] J[-2.39937*#<scale>]
G3 X[128.7832*#<scale>] Y[17.33008*#<scale>] I[-1.26203*#<scale>] J[-4.53327*#<scale>]
G3 X[125.58398*#<scale>] Y[16.29102*#<scale>] I[0.01526*#<scale>] J[-5.49164*#<scale>]
G3 X[124.16673*#<scale>] Y[14.83462*#<scale>] I[3.39082*#<scale>] J[-4.71749*#<scale>]
G3 X[123.21875*#<scale>] Y[13.03711*#<scale>] I[7.50088*#<scale>] J[-5.10456*#<scale>]
G3 X[122.33008*#<scale>] Y[8.63477*#<scale>] I[10.80218*#<scale>] J[-4.47143*#<scale>]
G3 X[122.56784*#<scale>] Y[6.67148*#<scale>] I[7.47758*#<scale>] J[-0.09047*#<scale>]
G3 X[123.47852*#<scale>] Y[4.91602*#<scale>] I[4.24649*#<scale>] J[1.08898*#<scale>]
G3 X[126.36328*#<scale>] Y[3.60352*#<scale>] I[2.82627*#<scale>] J[2.38541*#<scale>]
G3 X[129.28906*#<scale>] Y[4.64258*#<scale>] I[0.00074*#<scale>] J[4.63663*#<scale>]
G3 X[130.52037*#<scale>] Y[6.0293*#<scale>] I[-3.23186*#<scale>] J[4.10967*#<scale>]
G3 X[131.28516*#<scale>] Y[7.71875*#<scale>] I[-6.5029*#<scale>] J[3.96159*#<scale>]
G1 X[135.44141*#<scale>] Y[7.08984*#<scale>]
G2 X[134.00514*#<scale>] Y[4.23114*#<scale>] I[-11.87256*#<scale>] J[4.17484*#<scale>]
G2 X[131.79102*#<scale>] Y[1.92188*#<scale>] I[-7.88363*#<scale>] J[5.34275*#<scale>]
G2 X[129.08508*#<scale>] Y[0.56922*#<scale>] I[-5.3138*#<scale>] J[7.24715*#<scale>]
G2 X[126.08984*#<scale>] Y[0.14453*#<scale>] I[-2.92298*#<scale>] J[9.84046*#<scale>]
G2 X[122.9755*#<scale>] Y[0.63758*#<scale>] I[-0.13266*#<scale>] J[9.24446*#<scale>]
G2 X[120.33398*#<scale>] Y[2.35938*#<scale>] I[2.19287*#<scale>] J[6.25138*#<scale>]
G2 X[118.69393*#<scale>] Y[5.37699*#<scale>] I[5.36449*#<scale>] J[4.87005*#<scale>]
G2 X[118.27432*#<scale>] Y[8.23889*#<scale>] I[12.16539*#<scale>] J[3.2454*#<scale>]
 M0G0 (Z3.0)
M5
M2
%