************* 0 - Starting blocks//Program header **********
(BEGIN PREDATOR NC HEADER)
(MACH_FILE=HAAS - 3XVMILL.MCH)
(MTOOL T1 S1 D.125 H5. A0. C0. DIAM_OFFSET 1 = .0625)
************* 108 - Rectangular stock format. **********
(SBOX X-1.0101 Y-.7197 Z-1. L2. W1.5 H1.)
(END PREDATOR NC HEADER)

%
O100
(PROGRAM NUMBER)
************* 2 - Starting blocks//Standard start of program **********
(PROGRAM NAME - TEST0001.NC)
(POST -  FANUC 0M)
(DATE - THU. 06/22/2017)
(TIME - 05:52PM)

N01 G90 G80 G40 G20 G17

N02 G00 G91 G28 Z0.
N03 G91 G28 X0. Y0.

(JOB 1  CONTOUR)
(FEATURE PROFILE)

N04 T01 M06
N05 S1497 M03
N06 G90 G54 X-.0101 Y-.6572
N07 G43 H01 Z.1 M08
************* 40 - Operations//Start of operation **********
************* 51 - Feed moves//Feed move Z **********
N08 G01 Z-.5 F3.5936
************* 53 - Feed moves//Feed move XY **********
N09 X.9274 F5.9893
************* 53 - Feed moves//Feed move XY **********
N10 Y.7178
************* 53 - Feed moves//Feed move XY **********
N11 X-.9476
************* 53 - Feed moves//Feed move XY **********
N12 Y-.6572
************* 53 - Feed moves//Feed move XY **********
N13 X-.0101
************* 50 - Rapid moves//Rapid move Z **********
N14 G00 Z.1
************* 4 - Tool Change//Move to next cut same tool **********

(JOB 1  CONTOUR)
(FEATURE PROFILE)

N15 S1497
N16 X-.1149 Y-.2183
************* 40 - Operations//Start of operation **********
************* 51 - Feed moves//Feed move Z **********
N17 G01 Z-.5 F3.5936
************* 53 - Feed moves//Feed move XY **********
N18 X-.0994 F5.9893
************* 53 - Feed moves//Feed move XY **********
N19 Y-.1873
************* 53 - Feed moves//Feed move XY **********
N20 X-.1304
************* 53 - Feed moves//Feed move XY **********
N21 Y-.2183
************* 53 - Feed moves//Feed move XY **********
N22 X-.1149
************* 50 - Rapid moves//Rapid move Z **********
N23 G00 Z.1
************* 4 - Tool Change//Move to next cut same tool **********

(JOB 1  CONTOUR)
(FEATURE PROFILE)

N24 S1497
N25 X.1349 Y-.2086
************* 40 - Operations//Start of operation **********
************* 51 - Feed moves//Feed move Z **********
N26 G01 Z-.5 F3.5936
************* 64 - Feed moves//Arc move XY**********
N27 G17 G02 X.1349 Y-.2086 I-.2457 J0. F5.9893
************* 50 - Rapid moves//Rapid move Z **********
N28 G00 Z.1
************* 4 - Tool Change//Move to next cut same tool **********

(JOB 1  CONTOUR)
(FEATURE PROFILE)

N29 S1497
N30 X.4055 Y.3089
************* 40 - Operations//Start of operation **********
************* 51 - Feed moves//Feed move Z **********
N31 G01 Z-.5 F3.5936
************* 53 - Feed moves//Feed move XY **********
N32 X.421 F5.9893
************* 53 - Feed moves//Feed move XY **********
N33 Y.3399
************* 53 - Feed moves//Feed move XY **********
N34 X.39
************* 53 - Feed moves//Feed move XY **********
N35 Y.3089
************* 53 - Feed moves//Feed move XY **********
N36 X.4055
************* 50 - Rapid moves//Rapid move Z **********
N37 G00 Z.1
************* 4 - Tool Change//Move to next cut same tool **********

(JOB 1  CONTOUR)
(FEATURE PROFILE)

N38 S1497
N39 X.6536 Y.3183
************* 40 - Operations//Start of operation **********
************* 51 - Feed moves//Feed move Z **********
N40 G01 Z-.5 F3.5936
************* 64 - Feed moves//Arc move XY**********
N41 G02 X.6536 Y.3183 I-.246 J0. F5.9893
************* 71 = Operations//End of operation **********
************* 50 - Rapid moves//Rapid move Z **********
N42 G00 Z.1
************* 5 - Ending blockes//End of program **********
N43 M09
N44 M05
N45 G91 G28 Z0.
N46 G91 G28 X0. Y0.
N47 T01 M06

************* 24 - Ending blocks//Program trailer **********
(END OF PROGRAM)

N48 M30
%