moriseiki@debian:~$ sudo-s bash: sudo-s: command not found moriseiki@debian:~$ sudo -s [sudo] password for moriseiki: root@debian:/home/moriseiki# dmesg [ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29 [ 0.000000] Linux version 4.19.0-14-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.171-2 (2021-01-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-14-rt-amd64 root=UUID=698ad063-846d-4683-8109-71934abca914 ro initrd=/install/initrd.gz quiet [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffb7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cffb8000-0x00000000cffbbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffbc000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010dffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000010e000000-0x000000010fffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: LENOVO 7360AEG/LENOVO, BIOS 5CKT44AUS 02/25/2009 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x10e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask FF0000000 write-back [ 0.000000] 4 base 0D7D00000 mask FFFF00000 uncachable [ 0.000000] 5 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xcffa0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f6b20-0x000f6b2f] [ 0.000000] RAMDISK: [mem 0x30c13000-0x34600fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F68F0 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000CFFAA2EB 0000B4 (v01 LENOVO TC-5C 0000012C LTP 00000000) [ 0.000000] ACPI: TCPA 0x00000000CFFB7BB9 000032 (v02 LENOVO TC-5C 0000012C PTL 00000000) [ 0.000000] ACPI: FACP 0x00000000CFFB7BEB 0000F4 (v03 LENOVO TC-5C 0000012C PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000CFFAE4C9 00966C (v01 LENOVO TC-5C 0000012C MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000CFFBBFC0 000040 [ 0.000000] ACPI: FACS 0x00000000CFFBBFC0 000040 [ 0.000000] ACPI: _MAR 0x00000000CFFB7CDF 000030 (v01 LENOVO TC-5C 0000012C LOHR 00000001) [ 0.000000] ACPI: SLIC 0x00000000CFFB7D0F 000176 (v01 LENOVO TC-5C 0000012C LTP 00000000) [ 0.000000] ACPI: MCFG 0x00000000CFFB7E85 00003C (v01 LENOVO TC-5C 0000012C LTP 00000000) [ 0.000000] ACPI: HPET 0x00000000CFFB7EC1 000038 (v01 LENOVO TC-5C 0000012C LTP 00000001) [ 0.000000] ACPI: APIC 0x00000000CFFB7EF9 000068 (v01 LENOVO TC-5C 0000012C LTP 00000000) [ 0.000000] ACPI: BOOT 0x00000000CFFB7F61 000028 (v01 LENOVO TC-5C 0000012C LTP 00000001) [ 0.000000] ACPI: ASF! 0x00000000CFFB7F89 000077 (v32 LENOVO TC-5C 0000012C PTL 00000001) [ 0.000000] ACPI: SSDT 0x00000000CFFABBEB 00025F (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFABB45 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFABA9F 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFAB9F9 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFAB953 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFAB8AD 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFAB807 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFAB761 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: SSDT 0x00000000CFFAA39F 0013C2 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000010dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x10dffa000-0x10dffefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000010dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff9ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000010dffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 8388 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000010dffffff] [ 0.000000] On node 0 totalpages: 909116 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13247 pages used for memmap [ 0.000000] DMA32 zone: 847776 pages, LIFO batch:63 [ 0.000000] Normal zone: 896 pages used for memmap [ 0.000000] Normal zone: 57344 pages, LIFO batch:15 [ 0.000000] Reserving Intel graphics memory at [mem 0xd8000000-0xdfffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000d3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffb7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffb8000-0xcffbbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffbc000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu s149120 r8192 d31104 u1048576 [ 0.000000] pcpu-alloc: s149120 r8192 d31104 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 894888 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-14-rt-amd64 root=UUID=698ad063-846d-4683-8109-71934abca914 ro initrd=/install/initrd.gz quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3428612K/3636464K available (10248K kernel code, 1315K rwdata, 3332K rodata, 1548K init, 2212K bss, 207852K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x4c/0x500 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 31894 entries in 125 pages [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180810 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: PIT calibration matches HPET. 1 loops [ 0.024000] tsc: Detected 2493.732 MHz processor [ 0.000011] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f218e2910, max_idle_ns: 440795326810 ns [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.46 BogoMIPS (lpj=9974928) [ 0.000024] pid_max: default: 32768 minimum: 301 [ 0.000065] Security Framework initialized [ 0.000066] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000094] AppArmor: AppArmor initialized [ 0.006486] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.011686] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011762] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.011801] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.012204] process: using mwait in idle threads [ 0.012209] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.012210] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.012212] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.012214] Spectre V2 : Mitigation: Full generic retpoline [ 0.012214] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.012215] Speculative Store Bypass: Vulnerable [ 0.012252] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.012434] Freeing SMP alternatives memory: 20K [ 0.123594] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.123791] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.123800] ... version: 2 [ 0.123801] ... bit width: 40 [ 0.123802] ... generic registers: 2 [ 0.123803] ... value mask: 000000ffffffffff [ 0.123804] ... max period: 000000007fffffff [ 0.123805] ... fixed-purpose events: 3 [ 0.123806] ... event mask: 0000000700000003 [ 0.123905] rcu: Hierarchical SRCU implementation. [ 0.124013] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.124013] smp: Bringing up secondary CPUs ... [ 0.124013] x86: Booting SMP configuration: [ 0.124013] .... node #0, CPUs: #1 [ 0.130059] smp: Brought up 1 node, 2 CPUs [ 0.130059] smpboot: Max logical packages: 1 [ 0.130059] smpboot: Total of 2 processors activated (9974.92 BogoMIPS) [ 0.130059] devtmpfs: initialized [ 0.130059] x86/mm: Memory block size: 128MB [ 0.132625] PM: Registering ACPI NVS region [mem 0xcffb8000-0xcffbbfff] (16384 bytes) [ 0.132625] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.132625] futex hash table entries: 512 (order: 4, 65536 bytes) [ 0.132625] pinctrl core: initialized pinctrl subsystem [ 0.132625] NET: Registered protocol family 16 [ 0.132625] audit: initializing netlink subsys (disabled) [ 0.132625] audit: type=2000 audit(1621576051.156:1): state=initialized audit_enabled=0 res=1 [ 0.132625] cpuidle: using governor ladder [ 0.132625] cpuidle: using governor menu [ 0.132625] Simple Boot Flag at 0x36 set to 0x80 [ 0.132625] ACPI: bus type PCI registered [ 0.132625] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.132625] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xf8000000-0xf90fffff] (base 0xf8000000) [ 0.132625] PCI: MMCONFIG at [mem 0xf8000000-0xf90fffff] reserved in E820 [ 0.132625] PCI: Using configuration type 1 for base access [ 0.132625] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.132625] mtrr: probably your BIOS does not setup all CPUs. [ 0.132625] mtrr: corrected configuration. [ 0.132917] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.132917] ACPI: Added _OSI(Module Device) [ 0.132917] ACPI: Added _OSI(Processor Device) [ 0.132917] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.132917] ACPI: Added _OSI(Processor Aggregator Device) [ 0.132917] ACPI: Added _OSI(Linux-Dell-Video) [ 0.132917] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.136746] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.140396] ACPI: Dynamic OEM Table Load: [ 0.140404] ACPI: SSDT 0xFFFF987FC8D0B400 000261 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.140726] ACPI: Dynamic OEM Table Load: [ 0.140733] ACPI: SSDT 0xFFFF987FC8D15800 00067D (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.141057] ACPI: Dynamic OEM Table Load: [ 0.141057] ACPI: SSDT 0xFFFF987FC8D4AC00 0001F2 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.141057] ACPI: Dynamic OEM Table Load: [ 0.141057] ACPI: SSDT 0xFFFF987FC8D50240 000085 (v01 LENOVO TC-5C 0000012C INTL 20050228) [ 0.141061] ACPI: Interpreter enabled [ 0.141061] ACPI: (supports S0 S3 S4 S5) [ 0.141061] ACPI: Using IOAPIC for interrupt routing [ 0.141061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.141061] ACPI: Enabled 13 GPEs in block 00 to 3F [ 0.150781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.150787] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.150842] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20180810/dsfield-183) [ 0.150902] ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20180810/psparse-516) [ 0.150961] acpi PNP0A03:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 0.150970] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge [ 0.151450] acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xfffffffe window]; [mem 0xfed40000-0xfed4ffff window] ignored [ 0.151722] PCI host bridge to bus 0000:00 [ 0.151725] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.151726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.151728] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.151729] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.151731] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.151733] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfffffffe window] [ 0.151734] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff window] [ 0.151736] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.151748] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 [ 0.151774] DMAR: Disabling IOMMU for graphics on this chipset [ 0.151775] DMAR: Forcing write-buffer flush capability [ 0.151892] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 [ 0.151904] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit] [ 0.151911] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.151916] pci 0000:00:02.0: reg 0x20: [io 0x1c70-0x1c77] [ 0.152064] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 [ 0.152076] pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit] [ 0.152219] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 [ 0.152246] pci 0000:00:03.0: reg 0x10: [mem 0xfc524000-0xfc52400f 64bit] [ 0.152331] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.152449] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 [ 0.152462] pci 0000:00:03.2: reg 0x10: [io 0x1c88-0x1c8f] [ 0.152467] pci 0000:00:03.2: reg 0x14: [io 0x1c7c-0x1c7f] [ 0.152473] pci 0000:00:03.2: reg 0x18: [io 0x1c80-0x1c87] [ 0.152477] pci 0000:00:03.2: reg 0x1c: [io 0x1c78-0x1c7b] [ 0.152482] pci 0000:00:03.2: reg 0x20: [io 0x1c40-0x1c4f] [ 0.152619] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 [ 0.152644] pci 0000:00:03.3: reg 0x10: [io 0x1c90-0x1c97] [ 0.152654] pci 0000:00:03.3: reg 0x14: [mem 0xfc526000-0xfc526fff] [ 0.152888] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 [ 0.152910] pci 0000:00:19.0: reg 0x10: [mem 0xfc500000-0xfc51ffff] [ 0.152919] pci 0000:00:19.0: reg 0x14: [mem 0xfc527000-0xfc527fff] [ 0.152927] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] [ 0.152997] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.153125] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 [ 0.153174] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] [ 0.153331] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 [ 0.153383] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] [ 0.153544] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 [ 0.153593] pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f] [ 0.153763] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 [ 0.153791] pci 0000:00:1a.7: reg 0x10: [mem 0xfc528000-0xfc5283ff] [ 0.153896] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.154025] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 [ 0.154050] pci 0000:00:1b.0: reg 0x10: [mem 0xfc520000-0xfc523fff 64bit] [ 0.154148] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.154273] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 [ 0.154355] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf] [ 0.154514] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 [ 0.154564] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df] [ 0.154723] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 [ 0.154773] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff] [ 0.154941] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 [ 0.154968] pci 0000:00:1d.7: reg 0x10: [mem 0xfc529000-0xfc5293ff] [ 0.155073] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.155201] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.155387] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 [ 0.155623] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601 [ 0.155647] pci 0000:00:1f.2: reg 0x10: [io 0x1ca8-0x1caf] [ 0.155655] pci 0000:00:1f.2: reg 0x14: [io 0x1c9c-0x1c9f] [ 0.155663] pci 0000:00:1f.2: reg 0x18: [io 0x1ca0-0x1ca7] [ 0.155672] pci 0000:00:1f.2: reg 0x1c: [io 0x1c98-0x1c9b] [ 0.155680] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f] [ 0.155689] pci 0000:00:1f.2: reg 0x24: [mem 0xfc52a000-0xfc52a7ff] [ 0.155741] pci 0000:00:1f.2: PME# supported from D3hot [ 0.155861] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500 [ 0.155882] pci 0000:00:1f.3: reg 0x10: [mem 0xfc52b000-0xfc52b0ff 64bit] [ 0.155904] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f] [ 0.156065] pci_bus 0000:11: extended config space not accessible [ 0.156144] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode) [ 0.156156] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.156158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.156159] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.156161] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.156163] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.156164] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfffffffe window] (subtractive decode) [ 0.156166] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff window] (subtractive decode) [ 0.156514] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.156574] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.156632] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.156690] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.156751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.156812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.156873] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.156934] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.156965] platform INT0800:00: failed to claim resource 0: [mem 0xff800000-0xffffffff] [ 0.157013] acpi INT0800:00: platform device creation failed: -16 [ 0.157944] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.157944] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.157944] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.157944] vgaarb: loaded [ 0.157944] pps_core: LinuxPPS API ver. 1 registered [ 0.157944] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.157944] PTP clock support registered [ 0.157944] EDAC MC: Ver: 3.0.0 [ 0.157944] PCI: Using ACPI for IRQ routing [ 0.157944] PCI: pci_cache_line_size set to 64 bytes [ 0.157944] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.157944] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.157944] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff] [ 0.157944] e820: reserve RAM buffer [mem 0x10e000000-0x10fffffff] [ 0.157944] HPET: 8 timers in total, 2 timers will be used for per-cpu timer [ 0.157944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0 [ 0.157944] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.160049] hpet: hpet2 irq 24 for MSI [ 0.160067] hpet: hpet3 irq 25 for MSI [ 0.160067] clocksource: Switched to clocksource tsc-early [ 0.180971] VFS: Disk quotas dquot_6.6.0 [ 0.180997] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.181235] AppArmor: AppArmor Filesystem Enabled [ 0.181269] pnp: PnP ACPI init [ 0.181571] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.181574] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.181576] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.181579] system 00:00: [io 0x1180-0x11bf] has been reserved [ 0.181581] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.181583] system 00:00: [io 0xfe00] has been reserved [ 0.181586] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.181588] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.181590] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.181593] system 00:00: [mem 0xfed12000-0xfed12fff] has been reserved [ 0.181595] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.181597] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.181600] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.181602] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.181604] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.181607] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.181609] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.181616] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181685] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.182464] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182523] pnp 00:03: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active) [ 0.182559] pnp: PnP ACPI: found 4 devices [ 0.189396] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.189413] pci 0000:00:1e.0: PCI bridge to [bus 11] [ 0.189428] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.189430] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window] [ 0.189431] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff window] [ 0.189433] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.189434] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.189436] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfffffffe window] [ 0.189438] pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff window] [ 0.189439] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7 window] [ 0.189441] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff window] [ 0.189442] pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff window] [ 0.189444] pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.189446] pci_bus 0000:11: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.189447] pci_bus 0000:11: resource 9 [mem 0xe0000000-0xfffffffe window] [ 0.189449] pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff window] [ 0.189561] NET: Registered protocol family 2 [ 0.189814] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes) [ 0.189888] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.190126] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.191208] TCP: Hash tables configured (established 32768 bind 32768) [ 0.191364] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.191519] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.191736] NET: Registered protocol family 1 [ 0.191746] NET: Registered protocol family 44 [ 0.191766] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.194223] PCI: CLS 32 bytes, default 64 [ 0.194297] Unpacking initramfs... [ 1.291703] Freeing initrd memory: 59320K [ 1.291711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.291713] software IO TLB: mapped [mem 0xcbfa0000-0xcffa0000] (64MB) [ 1.292778] Initialise system trusted keyrings [ 1.292793] Key type blacklist registered [ 1.292885] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 1.295352] zbud: loaded [ 1.525472] Key type asymmetric registered [ 1.525475] Asymmetric key parser 'x509' registered [ 1.525497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.525535] io scheduler noop registered [ 1.525536] io scheduler deadline registered [ 1.525592] io scheduler cfq registered (default) [ 1.525593] io scheduler mq-deadline registered [ 1.525796] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.525814] intel_idle: does not run on family 6 model 23 [ 1.525942] Monitor-Mwait will be used to enter C-1 state [ 1.525950] Monitor-Mwait will be used to enter C-2 state [ 1.525955] tsc: Marking TSC unstable due to TSC halts in idle [ 1.527585] clocksource: Switched to clocksource hpet [ 1.527799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.548739] 0000:00:03.3: ttyS0 at I/O 0x1c90 (irq = 17, base_baud = 115200) is a 16550A [ 1.549032] Linux agpgart interface v0.103 [ 1.549236] AMD IOMMUv2 driver by Joerg Roedel [ 1.549237] AMD IOMMUv2 functionality not available on this system [ 1.549476] i8042: PNP: No PS/2 controller found. [ 1.549567] mousedev: PS/2 mouse device common for all mice [ 1.549608] rtc_cmos 00:01: RTC can wake from S4 [ 1.549842] rtc_cmos 00:01: registered as rtc0 [ 1.549865] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.550549] NET: Registered protocol family 10 [ 1.561057] Segment Routing with IPv6 [ 1.561091] mip6: Mobile IPv6 [ 1.561095] NET: Registered protocol family 17 [ 1.561144] mpls_gso: MPLS GSO support [ 1.561297] mce: Using 6 MCE banks [ 1.561354] microcode: sig=0x10676, pf=0x1, revision=0x60f [ 1.561426] microcode: Microcode Update Driver: v2.2. [ 1.561632] registered taskstats version 1 [ 1.561645] Loading compiled-in X.509 certificates [ 1.614837] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.614857] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 1.614883] zswap: loaded using pool lzo/zbud [ 1.615030] AppArmor: AppArmor sha1 policy hashing enabled [ 1.615495] rtc_cmos 00:01: setting system clock to 2021-05-21 05:47:32 UTC (1621576052) [ 1.615553] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 1.617934] Freeing unused kernel image memory: 1548K [ 1.617991] Write protecting the kernel read-only data: 16384k [ 1.619414] Freeing unused kernel image memory: 2032K [ 1.619950] Freeing unused kernel image memory: 764K [ 1.632699] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.632772] x86/mm: Checking user space page tables [ 1.644899] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.644903] Run /init as init process [ 1.743027] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0 [ 1.756179] ACPI: Power Button [PWRB] [ 1.756281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.776063] ACPI: Power Button [PWRF] [ 1.838574] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB.PCI0.LPC0.PMIO) (20180810/utaddress-213) [ 1.838582] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.838585] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB.PCI0.LPC0.GPOX) (20180810/utaddress-213) [ 1.838588] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.838624] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.838954] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 1.842686] SCSI subsystem initialized [ 1.847411] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.847413] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.847701] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.864189] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.895551] libata version 3.00 loaded. [ 1.899118] ACPI: bus type USB registered [ 1.899185] usbcore: registered new interface driver usbfs [ 1.899201] usbcore: registered new interface driver hub [ 1.899226] usbcore: registered new device driver usb [ 1.931337] ahci 0000:00:1f.2: version 3.0 [ 1.931657] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xb impl SATA mode [ 1.931660] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part sxs [ 1.933074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.935809] uhci_hcd: USB Universal Host Controller Interface driver [ 1.942930] ehci-pci: EHCI PCI platform driver [ 1.943186] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.943195] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.943211] ehci-pci 0000:00:1a.7: debug port 1 [ 1.944064] scsi host0: ahci [ 1.948072] scsi host1: ahci [ 1.948864] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.949028] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc528000 [ 1.949095] scsi host2: ahci [ 1.949369] scsi host3: ahci [ 1.949629] scsi host4: ahci [ 1.949869] scsi host5: ahci [ 1.950011] ata1: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a100 irq 27 [ 1.950014] ata2: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a180 irq 27 [ 1.950016] ata3: DUMMY [ 1.950018] ata4: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a280 irq 27 [ 1.950020] ata5: DUMMY [ 1.950021] ata6: DUMMY [ 1.964114] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.964283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.964285] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.964287] usb usb1: Product: EHCI Host Controller [ 1.964288] usb usb1: Manufacturer: Linux 4.19.0-14-rt-amd64 ehci_hcd [ 1.964290] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.964762] hub 1-0:1.0: USB hub found [ 1.964855] hub 1-0:1.0: 6 ports detected [ 1.965339] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.965347] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 1.965355] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.965751] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 1.965832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.965834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.965836] usb usb2: Product: UHCI Host Controller [ 1.965838] usb usb2: Manufacturer: Linux 4.19.0-14-rt-amd64 uhci_hcd [ 1.965839] usb usb2: SerialNumber: 0000:00:1a.0 [ 1.966086] hub 2-0:1.0: USB hub found [ 1.966178] hub 2-0:1.0: 2 ports detected [ 1.966508] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.966514] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 1.966521] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.966856] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860 [ 1.966931] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.966933] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.966935] usb usb3: Product: UHCI Host Controller [ 1.966936] usb usb3: Manufacturer: Linux 4.19.0-14-rt-amd64 uhci_hcd [ 1.966938] usb usb3: SerialNumber: 0000:00:1a.1 [ 1.967206] hub 3-0:1.0: USB hub found [ 1.967301] hub 3-0:1.0: 2 ports detected [ 1.967615] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.967622] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 1.967629] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.967970] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880 [ 1.968089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.968091] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.968093] usb usb4: Product: UHCI Host Controller [ 1.968094] usb usb4: Manufacturer: Linux 4.19.0-14-rt-amd64 uhci_hcd [ 1.968096] usb usb4: SerialNumber: 0000:00:1a.2 [ 1.968351] hub 4-0:1.0: USB hub found [ 1.968448] hub 4-0:1.0: 2 ports detected [ 1.968769] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.968775] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.968782] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.969140] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 1.969214] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.969216] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.969218] usb usb5: Product: UHCI Host Controller [ 1.969220] usb usb5: Manufacturer: Linux 4.19.0-14-rt-amd64 uhci_hcd [ 1.969221] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.969474] hub 5-0:1.0: USB hub found [ 1.969575] hub 5-0:1.0: 2 ports detected [ 1.969949] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.969960] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.969969] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.970543] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 1.970665] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.970667] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.970669] usb usb6: Product: UHCI Host Controller [ 1.970671] usb usb6: Manufacturer: Linux 4.19.0-14-rt-amd64 uhci_hcd [ 1.970672] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.971001] hub 6-0:1.0: USB hub found [ 1.971106] hub 6-0:1.0: 2 ports detected [ 1.971468] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.971475] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.971482] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.971865] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 1.971945] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.971948] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.971949] usb usb7: Product: UHCI Host Controller [ 1.971951] usb usb7: Manufacturer: Linux 4.19.0-14-rt-amd64 uhci_hcd [ 1.971952] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.972268] hub 7-0:1.0: USB hub found [ 1.972371] hub 7-0:1.0: 2 ports detected [ 1.978850] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.978872] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 1.978887] ehci-pci 0000:00:1d.7: debug port 1 [ 1.983398] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.983639] ehci-pci 0000:00:1d.7: irq 16, io mem 0xfc529000 [ 1.996045] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.996120] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.996122] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.996124] usb usb8: Product: EHCI Host Controller [ 1.996126] usb usb8: Manufacturer: Linux 4.19.0-14-rt-amd64 ehci_hcd [ 1.996127] usb usb8: SerialNumber: 0000:00:1d.7 [ 1.996296] hub 8-0:1.0: USB hub found [ 1.996305] hub 8-0:1.0: 6 ports detected [ 2.005721] pci 0000:00:00.0: Intel Q45/Q43 Chipset [ 2.005747] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.006217] pci 0000:00:00.0: detected 131072K stolen memory [ 2.006252] [drm] Replacing VGA console driver [ 2.007197] Console: switching to colour dummy device 80x25 [ 2.007918] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.007920] [drm] Driver supports precise vblank timestamp query. [ 2.008342] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.014871] [drm] RC6 disabled, disabling runtime PM support [ 2.024140] hub 5-0:1.0: USB hub found [ 2.024154] hub 5-0:1.0: 2 ports detected [ 2.047659] random: fast init done [ 2.052125] hub 6-0:1.0: USB hub found [ 2.052137] hub 6-0:1.0: 2 ports detected [ 2.080139] hub 7-0:1.0: USB hub found [ 2.080157] hub 7-0:1.0: 2 ports detected [ 2.089315] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:d0:4c:bb:8a [ 2.089326] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.089419] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF [ 2.091265] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.101991] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 2.102212] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no) [ 2.102379] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2 [ 2.189417] fbcon: inteldrmfb (fb0) is primary device [ 2.209749] Console: switching to colour frame buffer device 170x48 [ 2.229022] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.262701] ata4: SATA link down (SStatus 0 SControl 300) [ 2.424063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.424109] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.424330] ata1.00: ATA-11: KINGSTON SA400S37120G, SBFKB1D1, max UDMA/133 [ 2.424334] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.424536] ata1.00: configured for UDMA/133 [ 2.424584] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653F, LE05, max UDMA/33 [ 2.424801] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1D1 PQ: 0 ANSI: 5 [ 2.425405] ata2.00: configured for UDMA/33 [ 2.426958] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653F LE05 PQ: 0 ANSI: 5 [ 2.469255] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.469267] sd 0:0:0:0: [sda] Write Protect is off [ 2.469269] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.469287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.470689] sda: sda1 sda2 < sda5 > [ 2.473703] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.506068] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.506074] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.506524] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.536063] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 2.727103] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01 [ 2.727108] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.727112] usb 5-2: Product: USB Receiver [ 2.727115] usb 5-2: Manufacturer: Logitech [ 2.739741] hidraw: raw HID events driver (C) Jiri Kosina [ 2.753206] usbcore: registered new interface driver usbhid [ 2.753208] usbhid: USB HID core driver [ 2.757317] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2 [ 2.881156] input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3 [ 2.881351] input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input4 [ 2.881466] input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5 [ 2.881507] input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input6 [ 2.881559] hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:00:1d.0-2:1 [ 3.010329] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input10 [ 3.010568] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1d.0-2:1 [ 3.053052] PM: Image not found (code -22) [ 3.130795] cryptd: max_cpu_qlen set to 1000 [ 3.289527] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.601861] systemd[1]: Inserted module 'autofs4' [ 3.631023] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.648158] systemd[1]: Detected architecture x86-64. [ 3.651242] systemd[1]: Set hostname to . [ 3.751961] systemd-sysv-generator[230]: stat() failed on /etc/init.d/ethercat, ignoring: No such file or directory [ 3.850578] random: systemd: uninitialized urandom read (16 bytes read) [ 3.852559] random: systemd: uninitialized urandom read (16 bytes read) [ 3.852761] systemd[1]: Listening on udev Control Socket. [ 3.852861] random: systemd: uninitialized urandom read (16 bytes read) [ 3.852941] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.853118] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.854802] systemd[1]: Created slice system-getty.slice. [ 3.855026] systemd[1]: Listening on Journal Audit Socket. [ 3.855161] systemd[1]: Listening on udev Kernel Socket. [ 3.855324] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.919957] ec_master: loading out-of-tree module taints kernel. [ 3.920409] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 3.922259] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.928866] EtherCAT: Master driver 1.5.2 unknown [ 3.928987] EtherCAT: 1 master waiting for devices. [ 3.933640] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown [ 3.933655] EtherCAT: Accepting 00:1F:D0:4C:BB:8A as main device for master 0. [ 3.933676] ec_generic: Binding socket to interface 2 (enp0s25). [ 3.952091] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 4.538832] audit: type=1400 audit(1621576055.420:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=290 comm="apparmor_parser" [ 4.544537] audit: type=1400 audit(1621576055.428:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=289 comm="apparmor_parser" [ 4.544554] audit: type=1400 audit(1621576055.428:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=289 comm="apparmor_parser" [ 4.547743] audit: type=1400 audit(1621576055.428:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=291 comm="apparmor_parser" [ 4.550968] audit: type=1400 audit(1621576055.432:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=292 comm="apparmor_parser" [ 4.558326] audit: type=1400 audit(1621576055.440:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=293 comm="apparmor_parser" [ 4.558343] audit: type=1400 audit(1621576055.440:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=293 comm="apparmor_parser" [ 4.558356] audit: type=1400 audit(1621576055.440:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=293 comm="apparmor_parser" [ 4.564894] audit: type=1400 audit(1621576055.448:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=295 comm="apparmor_parser" [ 4.807194] tpm_tis 00:03: 1.2 TPM (device-id 0xFE, rev-id 70) [ 4.816537] tpm tpm0: TPM is disabled/deactivated (0x6) [ 4.881531] iTCO_vendor_support: vendor-support=0 [ 4.907962] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.910800] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060) [ 4.925744] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.123551] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 5.164260] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.173305] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.259742] intel_powerclamp: No package C-state available [ 5.320171] intel_powerclamp: No package C-state available [ 5.532702] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1882: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 5.532706] snd_hda_codec_analog hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) [ 5.532708] snd_hda_codec_analog hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 5.532709] snd_hda_codec_analog hdaudioC0D2: mono: mono_out=0x0 [ 5.532711] snd_hda_codec_analog hdaudioC0D2: inputs: [ 5.532713] snd_hda_codec_analog hdaudioC0D2: Front Mic=0x14 [ 5.532715] snd_hda_codec_analog hdaudioC0D2: Rear Mic=0x17 [ 5.532717] snd_hda_codec_analog hdaudioC0D2: Line=0x15 [ 5.532719] snd_hda_codec_analog hdaudioC0D2: CD=0x18 [ 5.573119] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.585927] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.601167] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 5.616702] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 5.631292] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 5.642513] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 5.820667] systemd-journald[241]: Received request to flush runtime journal from PID 1 [ 5.834464] Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:998396k SSFS [ 10.702156] logitech-hidpp-device 0003:046D:404D.0004: HID++ 4.1 device connected. [ 11.396136] random: crng init done [ 11.396141] random: 7 urandom warning(s) missed due to ratelimiting [ 47.558025] show_signal_msg: 3 callbacks suppressed [ 47.558030] lcec_conf[948]: segfault at 5 ip 00007f2315e6cfca sp 00007fff825bc7e8 error 4 in libc-2.28.so[7f2315d58000+148000] [ 47.558039] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 [ 195.660923] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 195.661037] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 195.661529] EtherCAT 0: Link state of ecm0 changed to UP. [ 195.669641] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 195.673705] EtherCAT 0: 1 slave(s) responding on main device. [ 195.673709] EtherCAT 0: Slave states on main device: INIT. [ 195.674518] EtherCAT 0: Scanning bus. [ 195.750663] EtherCAT 0: Bus scanning completed in 76 ms. [ 195.750667] EtherCAT 0: Using slave main-0 as DC reference clock. [ 195.754721] EtherCAT 0: Slave states on main device: PREOP. [ 195.770905] EtherCAT 0: Slave states on main device: INIT. [ 195.795171] EtherCAT 0: Slave states on main device: PREOP. [ 352.618901] lcec_conf[1094]: segfault at 5 ip 00007fd2b0e32fca sp 00007ffd37755b28 error 4 in libc-2.28.so[7fd2b0d1e000+148000] [ 352.618909] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 [ 492.256162] lcec_conf[1229]: segfault at 5 ip 00007f930ac42fca sp 00007fffff4bbe18 error 4 in libc-2.28.so[7f930ab2e000+148000] [ 492.256172] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 root@debian:/home/moriseiki#