moriseiki@debian:~$ ethercat slaves 0 0:0 PREOP + NETX 52-RE/ECS moriseiki@debian:~$ ethercat master Master0 Phase: Idle Active: no Slaves: 1 Ethernet devices: Main: 00:1f:d0:4c:bb:8a (attached) Link: UP Tx frames: 26543 Tx bytes: 1593358 Rx frames: 26541 Rx bytes: 1593238 Tx errors: 0 Tx frame rate [1/s]: 247 247 206 Tx rate [KByte/s]: 14.5 14.5 12.0 Rx frame rate [1/s]: 247 247 206 Rx rate [KByte/s]: 14.5 14.5 12.0 Common: Tx frames: 26543 Tx bytes: 1593358 Rx frames: 26541 Rx bytes: 1593238 Lost frames: 2 Tx frame rate [1/s]: 247 247 206 Tx rate [KByte/s]: 14.5 14.5 12.0 Rx frame rate [1/s]: 247 247 206 Rx rate [KByte/s]: 14.5 14.5 12.0 Loss rate [1/s]: 0 0 0 Frame loss [%]: 0.0 0.0 0.0 Distributed clocks: Reference clock: Slave 0 DC reference time: 0 Application time: 0 2000-01-01 00:00:00.000000000 moriseiki@debian:~$ sudo -s [sudo] password for moriseiki: root@debian:/home/moriseiki# dmesg -t microcode: microcode updated early to revision 0x60f, date = 2010-09-29 Linux version 4.19.0-11-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.146-1 (2020-09-17) Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-11-rt-amd64 root=UUID=282091a4-4663-4bfe-9e92-519323a444ab ro initrd=/install/gtk/initrd.gz quiet x86/fpu: x87 FPU will use FXSAVE BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000ce000-0x00000000000d3fff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffb7fff] ACPI data BIOS-e820: [mem 0x00000000cffb8000-0x00000000cffbbfff] ACPI NVS BIOS-e820: [mem 0x00000000cffbc000-0x00000000dfffffff] reserved BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000010dffffff] usable BIOS-e820: [mem 0x000000010e000000-0x000000010fffffff] reserved NX (Execute Disable) protection: active SMBIOS 2.5 present. DMI: LENOVO 7360AEG/LENOVO, BIOS 5CKT44AUS 02/25/2009 tsc: Fast TSC calibration failed e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable last_pfn = 0x10e000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-E3FFF uncachable E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FE0000000 write-back 3 base 100000000 mask FF0000000 write-back 4 base 0D7D00000 mask FFFF00000 uncachable 5 base 0D0000000 mask FF0000000 uncachable 6 disabled 7 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved last_pfn = 0xcffa0 max_arch_pfn = 0x400000000 found SMP MP-table at [mem 0x000f6b20-0x000f6b2f] RAMDISK: [mem 0x30d23000-0x34688fff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F68F0 000024 (v02 LENOVO) ACPI: XSDT 0x00000000CFFAA2EB 0000B4 (v01 LENOVO TC-5C 0000012C LTP 00000000) ACPI: TCPA 0x00000000CFFB7BB9 000032 (v02 LENOVO TC-5C 0000012C PTL 00000000) ACPI: FACP 0x00000000CFFB7BEB 0000F4 (v03 LENOVO TC-5C 0000012C PTL 00000002) ACPI: DSDT 0x00000000CFFAE4C9 00966C (v01 LENOVO TC-5C 0000012C MSFT 0100000E) ACPI: FACS 0x00000000CFFBBFC0 000040 ACPI: FACS 0x00000000CFFBBFC0 000040 ACPI: _MAR 0x00000000CFFB7CDF 000030 (v01 LENOVO TC-5C 0000012C LOHR 00000001) ACPI: SLIC 0x00000000CFFB7D0F 000176 (v01 LENOVO TC-5C 0000012C LTP 00000000) ACPI: MCFG 0x00000000CFFB7E85 00003C (v01 LENOVO TC-5C 0000012C LTP 00000000) ACPI: HPET 0x00000000CFFB7EC1 000038 (v01 LENOVO TC-5C 0000012C LTP 00000001) ACPI: APIC 0x00000000CFFB7EF9 000068 (v01 LENOVO TC-5C 0000012C LTP 00000000) ACPI: BOOT 0x00000000CFFB7F61 000028 (v01 LENOVO TC-5C 0000012C LTP 00000001) ACPI: ASF! 0x00000000CFFB7F89 000077 (v32 LENOVO TC-5C 0000012C PTL 00000001) ACPI: SSDT 0x00000000CFFABBEB 00025F (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFABB45 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFABA9F 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFAB9F9 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFAB953 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFAB8AD 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFAB807 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFAB761 0000A6 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: SSDT 0x00000000CFFAA39F 0013C2 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000010dffffff] NODE_DATA(0) allocated [mem 0x10dffa000-0x10dffefff] Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000010dffffff] Device empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009cfff] node 0: [mem 0x0000000000100000-0x00000000cff9ffff] node 0: [mem 0x0000000100000000-0x000000010dffffff] Zeroed struct page in unavailable ranges: 8388 pages Initmem setup node 0 [mem 0x0000000000001000-0x000000010dffffff] On node 0 totalpages: 909116 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3996 pages, LIFO batch:0 DMA32 zone: 13247 pages used for memmap DMA32 zone: 847776 pages, LIFO batch:63 Normal zone: 896 pages used for memmap Normal zone: 57344 pages, LIFO batch:15 Reserving Intel graphics memory at [mem 0xd8000000-0xdfffffff] ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 smpboot: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff] PM: Registered nosave memory: [mem 0x000ce000-0x000d3fff] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: Registered nosave memory: [mem 0xcffa0000-0xcffb7fff] PM: Registered nosave memory: [mem 0xcffb8000-0xcffbbfff] PM: Registered nosave memory: [mem 0xcffbc000-0xdfffffff] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xe0000000-0xf7ffffff] available for PCI devices Booting paravirtualized kernel on bare hardware clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 percpu: Embedded 46 pages/cpu s148992 r8192 d31232 u1048576 pcpu-alloc: s148992 r8192 d31232 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists, mobility grouping on. Total pages: 894888 Policy zone: Normal Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-11-rt-amd64 root=UUID=282091a4-4663-4bfe-9e92-519323a444ab ro initrd=/install/gtk/initrd.gz quiet Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3429156K/3636464K available (10248K kernel code, 1314K rwdata, 3328K rodata, 1540K init, 2224K bss, 207308K reserved, 0K cma-reserved) random: get_random_u64 called from __kmem_cache_create+0x4c/0x500 with crng_init=0 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Kernel/User page tables isolation: enabled ftrace: allocating 31838 entries in 125 pages rcu: Preemptible hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. rcu: RCU priority boosting: priority 1 delay 500 ms. No expedited grace period (rcu_normal_after_boot). Tasks RCU enabled. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 Console: colour VGA+ 80x25 console [tty0] enabled ACPI: Core revision 20180810 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns hpet clockevent registered APIC: Switch to symmetric I/O mode setup ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 tsc: PIT calibration matches HPET. 1 loops tsc: Detected 2493.653 MHz processor clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f1ce200ca, max_idle_ns: 440795251202 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.30 BogoMIPS (lpj=9974612) pid_max: default: 32768 minimum: 301 Security Framework initialized Yama: disabled by default; enable with sysctl kernel.yama.* AppArmor: AppArmor initialized Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) process: using mwait in idle threads Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Spectre V2 : Mitigation: Full generic retpoline Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Speculative Store Bypass: Vulnerable MDS: Vulnerable: Clear CPU buffers attempted, no microcode Freeing SMP alternatives memory: 20K smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0x6) Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 rcu: Hierarchical SRCU implementation. NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 smp: Brought up 1 node, 2 CPUs smpboot: Max logical packages: 1 smpboot: Total of 2 processors activated (9974.61 BogoMIPS) devtmpfs: initialized x86/mm: Memory block size: 128MB PM: Registering ACPI NVS region [mem 0xcffb8000-0xcffbbfff] (16384 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 4, 65536 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) audit: type=2000 audit(1621770683.156:1): state=initialized audit_enabled=0 res=1 cpuidle: using governor ladder cpuidle: using governor menu Simple Boot Flag at 0x36 set to 0x80 ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xf8000000-0xf90fffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xf90fffff] reserved in E820 PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ACPI: 10 ACPI AML tables successfully acquired and loaded ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8EA108D05000 000261 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8EA108D13800 00067D (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8EA108CF3200 0001F2 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8EA108C77E40 000085 (v01 LENOVO TC-5C 0000012C INTL 20050228) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Enabled 13 GPEs in block 00 to 3F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20180810/dsfield-183) ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20180810/psparse-516) acpi PNP0A03:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xfffffffe window]; [mem 0xfed40000-0xfed4ffff window] ignored PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfffffffe window] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff window] pci_bus 0000:00: root bus resource [bus 00-3f] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 DMAR: Disabling IOMMU for graphics on this chipset DMAR: Forcing write-buffer flush capability pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x1c70-0x1c77] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 pci 0000:00:03.0: reg 0x10: [mem 0xfc524000-0xfc52400f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 pci 0000:00:03.2: reg 0x10: [io 0x1c88-0x1c8f] pci 0000:00:03.2: reg 0x14: [io 0x1c7c-0x1c7f] pci 0000:00:03.2: reg 0x18: [io 0x1c80-0x1c87] pci 0000:00:03.2: reg 0x1c: [io 0x1c78-0x1c7b] pci 0000:00:03.2: reg 0x20: [io 0x1c40-0x1c4f] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 pci 0000:00:03.3: reg 0x10: [io 0x1c90-0x1c97] pci 0000:00:03.3: reg 0x14: [mem 0xfc526000-0xfc526fff] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 pci 0000:00:19.0: reg 0x10: [mem 0xfc500000-0xfc51ffff] pci 0000:00:19.0: reg 0x14: [mem 0xfc527000-0xfc527fff] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 pci 0000:00:1a.7: reg 0x10: [mem 0xfc528000-0xfc5283ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xfc520000-0xfc523fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 0x10: [mem 0xfc529000-0xfc5293ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601 pci 0000:00:1f.2: reg 0x10: [io 0x1ca8-0x1caf] pci 0000:00:1f.2: reg 0x14: [io 0x1c9c-0x1c9f] pci 0000:00:1f.2: reg 0x18: [io 0x1ca0-0x1ca7] pci 0000:00:1f.2: reg 0x1c: [io 0x1c98-0x1c9b] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f] pci 0000:00:1f.2: reg 0x24: [mem 0xfc52a000-0xfc52a7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x10: [mem 0xfc52b000-0xfc52b0ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f] pci_bus 0000:11: extended config space not accessible pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfffffffe window] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff window] (subtractive decode) ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. platform INT0800:00: failed to claim resource 0: [mem 0xff800000-0xffffffff] acpi INT0800:00: platform device creation failed: -16 pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:00:02.0: vgaarb: bridge control possible vgaarb: loaded pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Expanded resource Reserved due to conflict with PCI Bus 0000:00 e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff] e820: reserve RAM buffer [mem 0x10e000000-0x10fffffff] HPET: 8 timers in total, 2 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI clocksource: Switched to clocksource tsc-early VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) AppArmor: AppArmor Filesystem Enabled pnp: PnP ACPI init system 00:00: [io 0x0500-0x057f] has been reserved system 00:00: [io 0x0800-0x080f] has been reserved system 00:00: [io 0x1000-0x107f] has been reserved system 00:00: [io 0x1180-0x11bf] has been reserved system 00:00: [io 0x04d0-0x04d1] has been reserved system 00:00: [io 0xfe00] has been reserved system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:00: [mem 0xfed12000-0xfed12fff] has been reserved system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active) pnp: PnP ACPI: found 4 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:1e.0: PCI bridge to [bus 11] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfffffffe window] pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff window] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff window] pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff window] pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff window] pci_bus 0000:11: resource 8 [mem 0x000dc000-0x000dffff window] pci_bus 0000:11: resource 9 [mem 0xe0000000-0xfffffffe window] pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff window] NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 6, 262144 bytes) UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) NET: Registered protocol family 1 NET: Registered protocol family 44 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] PCI: CLS 32 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 58776K PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0xcbfa0000-0xcffa0000] (64MB) Initialise system trusted keyrings Key type blacklist registered workingset: timestamp_bits=40 max_order=20 bucket_order=0 zbud: loaded Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 intel_idle: does not run on family 6 model 23 Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state tsc: Marking TSC unstable due to TSC halts in idle clocksource: Switched to clocksource hpet Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 0000:00:03.3: ttyS0 at I/O 0x1c90 (irq = 17, base_baud = 115200) is a 16550A Linux agpgart interface v0.103 AMD IOMMUv2 driver by Joerg Roedel AMD IOMMUv2 functionality not available on this system i8042: PNP: No PS/2 controller found. mousedev: PS/2 mouse device common for all mice rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: registered as rtc0 rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs NET: Registered protocol family 10 Segment Routing with IPv6 mip6: Mobile IPv6 NET: Registered protocol family 17 mpls_gso: MPLS GSO support mce: Using 6 MCE banks microcode: sig=0x10676, pf=0x1, revision=0x60f microcode: Microcode Update Driver: v2.2. registered taskstats version 1 Loading compiled-in X.509 certificates Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' zswap: loaded using pool lzo/zbud AppArmor: AppArmor sha1 policy hashing enabled rtc_cmos 00:01: setting system clock to 2021-05-23 11:51:24 UTC (1621770684) Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line Freeing unused kernel image memory: 1540K Write protecting the kernel read-only data: 16384k Freeing unused kernel image memory: 2032K Freeing unused kernel image memory: 768K x86/mm: Checked W+X mappings: passed, no W+X pages found. x86/mm: Checking user space page tables x86/mm: Checked W+X mappings: passed, no W+X pages found. Run /init as init process input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB.PCI0.LPC0.PMIO) (20180810/utaddress-213) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB.PCI0.LPC0.GPOX) (20180810/utaddress-213) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) i801_smbus 0000:00:1f.3: SMBus using PCI interrupt ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1a.7: EHCI Host Controller ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1a.7: debug port 1 ehci-pci 0000:00:1a.7: cache line size of 32 is not supported ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc528000 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode uhci_hcd: USB Universal Host Controller Interface driver ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.19.0-11-rt-amd64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 libata version 3.00 loaded. hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.0: detected 2 ports uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd usb usb2: SerialNumber: 0000:00:1a.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.1: detected 2 ports uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.2: detected 2 ports uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: cache line size of 32 is not supported ehci-pci 0000:00:1d.7: irq 16, io mem 0xfc529000 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xb impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part sxs ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: EHCI Host Controller usb usb7: Manufacturer: Linux 4.19.0-11-rt-amd64 ehci_hcd usb usb7: SerialNumber: 0000:00:1d.7 hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected scsi host0: ahci scsi host1: ahci scsi host2: ahci scsi host3: ahci scsi host4: ahci scsi host5: ahci ata1: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a100 irq 27 ata2: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a180 irq 27 ata3: DUMMY ata4: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a280 irq 27 ata5: DUMMY ata6: DUMMY hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected pci 0000:00:00.0: Intel Q45/Q43 Chipset pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable pci 0000:00:00.0: detected 131072K stolen memory [drm] Replacing VGA console driver Console: switching to colour dummy device 80x25 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] RC6 disabled, disabling runtime PM support random: fast init done e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:d0:4c:bb:8a e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF e1000e 0000:00:19.0 enp0s25: renamed from eth0 [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2 fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 170x48 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device ata4: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-11: KINGSTON SA400S37120G, SBFKB1D1, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA ata1.00: configured for UDMA/133 ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653F, LE05, max UDMA/33 scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1D1 PQ: 0 ANSI: 5 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653F LE05 PQ: 0 ANSI: 5 usb 5-2: new full-speed USB device number 2 using uhci_hcd sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usb 5-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: USB Receiver usb 5-2: Manufacturer: Logitech hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2 input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3 input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input4 input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5 input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input6 hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:00:1d.0-2:1 input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input10 logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1d.0-2:1 PM: Image not found (code -22) cryptd: max_cpu_qlen set to 1000 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) systemd[1]: Inserted module 'autofs4' systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture x86-64. systemd[1]: Set hostname to . random: systemd: uninitialized urandom read (16 bytes read) random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Listening on initctl Compatibility Named Pipe. random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Listening on udev Control Socket. systemd[1]: Reached target Remote File Systems. systemd[1]: Listening on fsck to fsckd communication Socket. systemd[1]: Started Forward Password Requests to Wall Directory Watch. systemd[1]: Created slice User and Session Slice. systemd[1]: Reached target Slices. EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro ec_master: loading out-of-tree module taints kernel. ec_master: module verification failed: signature and/or required key missing - tainting kernel EtherCAT: Master driver 1.5.2 unknown EtherCAT: 1 master waiting for devices. ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown EtherCAT: Accepting 00:1F:D0:4C:BB:8A as main device for master 0. ec_generic: Binding socket to interface 2 (enp0s25). EtherCAT 0: Starting EtherCAT-IDLE thread. audit: type=1400 audit(1621770687.232:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=286 comm="apparmor_parser" audit: type=1400 audit(1621770687.236:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=287 comm="apparmor_parser" audit: type=1400 audit(1621770687.276:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=289 comm="apparmor_parser" audit: type=1400 audit(1621770687.276:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=289 comm="apparmor_parser" audit: type=1400 audit(1621770687.288:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=290 comm="apparmor_parser" audit: type=1400 audit(1621770687.288:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=290 comm="apparmor_parser" audit: type=1400 audit(1621770687.288:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=288 comm="apparmor_parser" audit: type=1400 audit(1621770687.288:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=288 comm="apparmor_parser" audit: type=1400 audit(1621770687.292:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=291 comm="apparmor_parser" iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060) tpm_tis 00:03: 1.2 TPM (device-id 0xFE, rev-id 70) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) tpm tpm0: TPM is disabled/deactivated (0x6) input: PC Speaker as /devices/platform/pcspkr/input/input11 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 intel_powerclamp: No package C-state available intel_powerclamp: No package C-state available snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1882: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line snd_hda_codec_analog hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) snd_hda_codec_analog hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) snd_hda_codec_analog hdaudioC0D2: mono: mono_out=0x0 snd_hda_codec_analog hdaudioC0D2: inputs: snd_hda_codec_analog hdaudioC0D2: Front Mic=0x14 snd_hda_codec_analog hdaudioC0D2: Rear Mic=0x17 snd_hda_codec_analog hdaudioC0D2: Line=0x15 snd_hda_codec_analog hdaudioC0D2: CD=0x18 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 Adding 3634172k swap on /dev/sda5. Priority:-2 extents:1 across:3634172k SSFS systemd-journald[238]: Received request to flush runtime journal from PID 1 logitech-hidpp-device 0003:046D:404D.0004: HID++ 4.1 device connected. random: crng init done random: 7 urandom warning(s) missed due to ratelimiting show_signal_msg: 3 callbacks suppressed lcec_conf[814]: segfault at 5 ip 00007fce6f881fca sp 00007ffd25aee6d8 error 4 in libc-2.28.so[7fce6f76d000+148000] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 lcec_conf[1138]: segfault at 5 ip 00007fce486fdfca sp 00007ffd0e14b858 error 4 in libc-2.28.so[7fce485e9000+148000] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO EtherCAT 0: Link state of ecm0 changed to UP. EtherCAT WARNING 0: 1 datagram TIMED OUT! EtherCAT 0: 1 slave(s) responding on main device. EtherCAT 0: Slave states on main device: INIT. EtherCAT 0: Scanning bus. EtherCAT 0: Bus scanning completed in 76 ms. EtherCAT 0: Using slave main-0 as DC reference clock. EtherCAT 0: Slave states on main device: PREOP. EtherCAT 0: Slave states on main device: INIT. EtherCAT 0: Slave states on main device: PREOP. lcec_conf[1345]: segfault at 5 ip 00007f0d836bafca sp 00007ffd85c12ae8 error 4 in libc-2.28.so[7f0d835a6000+148000] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 lcec_conf[1460]: segfault at 5 ip 00007fb798fb8fca sp 00007ffc68606fb8 error 4 in libc-2.28.so[7fb798ea4000+148000] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 lcec_conf[1589]: segfault at 5 ip 00007f5b722d9fca sp 00007ffdc2cc61e8 error 4 in libc-2.28.so[7f5b721c5000+148000] Code: ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 89 f1 89 f8 48 83 e1 3f 48 83 e0 3f 83 f9 30 77 3f 83 f8 30 77 3a 66 0f 12 0f <66> 0f 12 16 66 0f 16 4f 08 66 0f 16 56 08 66 0f ef c0 66 0f 74 c1 root@debian:/home/moriseiki#