[ 0.149601] DMAR: Forcing write-buffer flush capability [ 0.149715] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 [ 0.149727] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit] [ 0.149733] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.149738] pci 0000:00:02.0: reg 0x20: [io 0x1c70-0x1c77] [ 0.149864] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 [ 0.149875] pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit] [ 0.150018] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 [ 0.150044] pci 0000:00:03.0: reg 0x10: [mem 0xfc524000-0xfc52400f 64bit] [ 0.152016] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.152016] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 [ 0.152016] pci 0000:00:03.2: reg 0x10: [io 0x1c88-0x1c8f] [ 0.152016] pci 0000:00:03.2: reg 0x14: [io 0x1c7c-0x1c7f] [ 0.152016] pci 0000:00:03.2: reg 0x18: [io 0x1c80-0x1c87] [ 0.152016] pci 0000:00:03.2: reg 0x1c: [io 0x1c78-0x1c7b] [ 0.152016] pci 0000:00:03.2: reg 0x20: [io 0x1c40-0x1c4f] [ 0.152016] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 [ 0.152016] pci 0000:00:03.3: reg 0x10: [io 0x1c90-0x1c97] [ 0.152016] pci 0000:00:03.3: reg 0x14: [mem 0xfc526000-0xfc526fff] [ 0.152016] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 [ 0.152016] pci 0000:00:19.0: reg 0x10: [mem 0xfc500000-0xfc51ffff] [ 0.152016] pci 0000:00:19.0: reg 0x14: [mem 0xfc527000-0xfc527fff] [ 0.152016] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] [ 0.152016] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.152016] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 [ 0.152016] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] [ 0.152016] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 [ 0.152016] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] [ 0.152016] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 [ 0.152016] pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f] [ 0.152016] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 [ 0.152016] pci 0000:00:1a.7: reg 0x10: [mem 0xfc528000-0xfc5283ff] [ 0.152016] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.152016] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 [ 0.152016] pci 0000:00:1b.0: reg 0x10: [mem 0xfc520000-0xfc523fff 64bit] [ 0.152016] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.152073] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 [ 0.152158] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf] [ 0.152347] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 [ 0.152396] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df] [ 0.152553] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 [ 0.152601] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff] [ 0.152771] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 [ 0.152797] pci 0000:00:1d.7: reg 0x10: [mem 0xfc529000-0xfc5293ff] [ 0.152901] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.153027] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.153217] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 [ 0.153458] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601 [ 0.153481] pci 0000:00:1f.2: reg 0x10: [io 0x1ca8-0x1caf] [ 0.153490] pci 0000:00:1f.2: reg 0x14: [io 0x1c9c-0x1c9f] [ 0.153498] pci 0000:00:1f.2: reg 0x18: [io 0x1ca0-0x1ca7] [ 0.153507] pci 0000:00:1f.2: reg 0x1c: [io 0x1c98-0x1c9b] [ 0.153515] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f] [ 0.153524] pci 0000:00:1f.2: reg 0x24: [mem 0xfc52a000-0xfc52a7ff] [ 0.153578] pci 0000:00:1f.2: PME# supported from D3hot [ 0.153701] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500 [ 0.153724] pci 0000:00:1f.3: reg 0x10: [mem 0xfc52b000-0xfc52b0ff 64bit] [ 0.153746] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f] [ 0.153897] pci_bus 0000:11: extended config space not accessible [ 0.153977] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode) [ 0.153988] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.153990] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.153991] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.153993] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.153994] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.153996] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfffffffe window] (subtractive decode) [ 0.153998] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff window] (subtractive decode) [ 0.154334] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.154394] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.154452] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.154510] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.154569] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.154630] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.154690] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.154750] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.154779] platform INT0800:00: failed to claim resource 0: [mem 0xff800000-0xffffffff] [ 0.154828] acpi INT0800:00: platform device creation failed: -16 [ 0.156045] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.156045] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.156045] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.156045] vgaarb: loaded [ 0.156119] pps_core: LinuxPPS API ver. 1 registered [ 0.156120] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.156124] PTP clock support registered [ 0.156135] EDAC MC: Ver: 3.0.0 [ 0.156227] PCI: Using ACPI for IRQ routing [ 0.156543] PCI: pci_cache_line_size set to 64 bytes [ 0.156610] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.156612] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.156615] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff] [ 0.156616] e820: reserve RAM buffer [mem 0x10e000000-0x10fffffff] [ 0.157112] HPET: 8 timers in total, 2 timers will be used for per-cpu timer [ 0.157124] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0 [ 0.157129] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.160046] hpet: hpet2 irq 24 for MSI [ 0.160059] hpet: hpet3 irq 25 for MSI [ 0.160074] clocksource: Switched to clocksource tsc-early [ 0.181171] VFS: Disk quotas dquot_6.6.0 [ 0.181197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.181438] AppArmor: AppArmor Filesystem Enabled [ 0.181469] pnp: PnP ACPI init [ 0.181778] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.181780] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.181782] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.181784] system 00:00: [io 0x1180-0x11bf] has been reserved [ 0.181787] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.181789] system 00:00: [io 0xfe00] has been reserved [ 0.181795] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.181798] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.181800] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.181802] system 00:00: [mem 0xfed12000-0xfed12fff] has been reserved [ 0.181804] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.181806] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.181809] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.181811] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.181813] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.181815] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.181817] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.181825] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181897] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.182668] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.182717] pnp 00:03: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active) [ 0.182753] pnp: PnP ACPI: found 4 devices [ 0.189610] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.189627] pci 0000:00:1e.0: PCI bridge to [bus 11] [ 0.189642] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.189644] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window] [ 0.189645] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff window] [ 0.189647] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.189648] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.189650] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfffffffe window] [ 0.189652] pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff window] [ 0.189653] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7 window] [ 0.189655] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff window] [ 0.189656] pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff window] [ 0.189658] pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff window] [ 0.189659] pci_bus 0000:11: resource 8 [mem 0x000dc000-0x000dffff window] [ 0.189661] pci_bus 0000:11: resource 9 [mem 0xe0000000-0xfffffffe window] [ 0.189662] pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff window] [ 0.189771] NET: Registered protocol family 2 [ 0.190003] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes) [ 0.190077] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.190314] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.190920] TCP: Hash tables configured (established 32768 bind 32768) [ 0.191072] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.191224] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.191448] NET: Registered protocol family 1 [ 0.191458] NET: Registered protocol family 44 [ 0.191477] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.194387] PCI: CLS 32 bytes, default 64 [ 0.194467] Unpacking initramfs... [ 1.286770] Freeing initrd memory: 58776K [ 1.286778] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.286780] software IO TLB: mapped [mem 0xcbfa0000-0xcffa0000] (64MB) [ 1.287802] Initialise system trusted keyrings [ 1.287818] Key type blacklist registered [ 1.287908] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 1.290450] zbud: loaded [ 1.520833] Key type asymmetric registered [ 1.520836] Asymmetric key parser 'x509' registered [ 1.520859] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.520900] io scheduler noop registered [ 1.520901] io scheduler deadline registered [ 1.520962] io scheduler cfq registered (default) [ 1.520963] io scheduler mq-deadline registered [ 1.521162] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.521182] intel_idle: does not run on family 6 model 23 [ 1.521310] Monitor-Mwait will be used to enter C-1 state [ 1.521318] Monitor-Mwait will be used to enter C-2 state [ 1.521323] tsc: Marking TSC unstable due to TSC halts in idle [ 1.522948] clocksource: Switched to clocksource hpet [ 1.523159] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.544118] 0000:00:03.3: ttyS0 at I/O 0x1c90 (irq = 17, base_baud = 115200) is a 16550A [ 1.544405] Linux agpgart interface v0.103 [ 1.544614] AMD IOMMUv2 driver by Joerg Roedel [ 1.544615] AMD IOMMUv2 functionality not available on this system [ 1.544849] i8042: PNP: No PS/2 controller found. [ 1.544945] mousedev: PS/2 mouse device common for all mice [ 1.544988] rtc_cmos 00:01: RTC can wake from S4 [ 1.545224] rtc_cmos 00:01: registered as rtc0 [ 1.545249] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.545945] NET: Registered protocol family 10 [ 1.556569] Segment Routing with IPv6 [ 1.556602] mip6: Mobile IPv6 [ 1.556606] NET: Registered protocol family 17 [ 1.556651] mpls_gso: MPLS GSO support [ 1.556805] mce: Using 6 MCE banks [ 1.556864] microcode: sig=0x10676, pf=0x1, revision=0x60f [ 1.556939] microcode: Microcode Update Driver: v2.2. [ 1.557144] registered taskstats version 1 [ 1.557158] Loading compiled-in X.509 certificates [ 1.610005] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.610024] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 1.610051] zswap: loaded using pool lzo/zbud [ 1.610192] AppArmor: AppArmor sha1 policy hashing enabled [ 1.610678] rtc_cmos 00:01: setting system clock to 2021-05-27 05:20:09 UTC (1622092809) [ 1.610736] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 1.613212] Freeing unused kernel image memory: 1540K [ 1.613273] Write protecting the kernel read-only data: 16384k [ 1.614696] Freeing unused kernel image memory: 2032K [ 1.615239] Freeing unused kernel image memory: 768K [ 1.627693] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.627765] x86/mm: Checking user space page tables [ 1.639714] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.639717] Run /init as init process [ 1.735438] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0 [ 1.748076] ACPI: Power Button [PWRB] [ 1.748180] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.764063] ACPI: Power Button [PWRF] [ 1.849985] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.849987] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.850641] ACPI: bus type USB registered [ 1.852853] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.860303] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 1.861859] SCSI subsystem initialized [ 1.862872] usbcore: registered new interface driver usbfs [ 1.864368] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.869422] usbcore: registered new interface driver hub [ 1.872429] usbcore: registered new device driver usb [ 1.903218] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB.PCI0.LPC0.PMIO) (20180810/utaddress-213) [ 1.903227] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.903231] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB.PCI0.LPC0.GPOX) (20180810/utaddress-213) [ 1.903234] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.908306] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.915792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.942785] ehci-pci: EHCI PCI platform driver [ 1.945981] uhci_hcd: USB Universal Host Controller Interface driver [ 1.947014] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.947354] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.947370] ehci-pci 0000:00:1a.7: debug port 1 [ 1.951272] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.951775] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc528000 [ 1.960127] libata version 3.00 loaded. [ 1.964064] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.964147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.964150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.964151] usb usb1: Product: EHCI Host Controller [ 1.964153] usb usb1: Manufacturer: Linux 4.19.0-11-rt-amd64 ehci_hcd [ 1.964154] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.964405] hub 1-0:1.0: USB hub found [ 1.964475] hub 1-0:1.0: 6 ports detected [ 1.964812] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.964819] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 1.964827] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.964987] ahci 0000:00:1f.2: version 3.0 [ 1.965321] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xb impl SATA mode [ 1.965324] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part sxs [ 1.969486] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 1.969578] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.969580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.969581] usb usb2: Product: UHCI Host Controller [ 1.969583] usb usb2: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd [ 1.969584] usb usb2: SerialNumber: 0000:00:1a.0 [ 1.969786] hub 2-0:1.0: USB hub found [ 1.969796] hub 2-0:1.0: 2 ports detected [ 1.970132] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.970139] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 1.970147] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.971531] scsi host0: ahci [ 1.972223] scsi host1: ahci [ 1.972550] scsi host2: ahci [ 1.972870] scsi host3: ahci [ 1.973203] scsi host4: ahci [ 1.973534] scsi host5: ahci [ 1.973680] ata1: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a100 irq 27 [ 1.973683] ata2: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a180 irq 27 [ 1.973684] ata3: DUMMY [ 1.973686] ata4: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a280 irq 27 [ 1.973687] ata5: DUMMY [ 1.973688] ata6: DUMMY [ 1.976109] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860 [ 1.976201] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.976204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.976205] usb usb3: Product: UHCI Host Controller [ 1.976207] usb usb3: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd [ 1.976208] usb usb3: SerialNumber: 0000:00:1a.1 [ 1.976388] hub 3-0:1.0: USB hub found [ 1.976398] hub 3-0:1.0: 2 ports detected [ 1.976753] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.976760] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 1.976767] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.977283] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880 [ 1.977357] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.977359] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.977360] usb usb4: Product: UHCI Host Controller [ 1.977362] usb usb4: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd [ 1.977363] usb usb4: SerialNumber: 0000:00:1a.2 [ 1.977617] hub 4-0:1.0: USB hub found [ 1.977714] hub 4-0:1.0: 2 ports detected [ 1.978033] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.978039] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.978046] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.978372] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 1.978452] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.978454] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.978456] usb usb5: Product: UHCI Host Controller [ 1.978457] usb usb5: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd [ 1.978459] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.978706] hub 5-0:1.0: USB hub found [ 1.978803] hub 5-0:1.0: 2 ports detected [ 1.979119] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.979126] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.979132] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.979480] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 1.979611] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.979613] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.979615] usb usb6: Product: UHCI Host Controller [ 1.979616] usb usb6: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd [ 1.979618] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.979875] hub 6-0:1.0: USB hub found [ 1.979973] hub 6-0:1.0: 2 ports detected [ 1.980323] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.980330] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.980337] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.982752] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 1.982831] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.982833] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.982835] usb usb7: Product: UHCI Host Controller [ 1.982836] usb usb7: Manufacturer: Linux 4.19.0-11-rt-amd64 uhci_hcd [ 1.982838] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.983127] hub 7-0:1.0: USB hub found [ 1.983232] hub 7-0:1.0: 2 ports detected [ 1.988357] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.988368] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 1.988384] ehci-pci 0000:00:1d.7: debug port 1 [ 1.998142] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.998256] ehci-pci 0000:00:1d.7: irq 16, io mem 0xfc529000 [ 2.012100] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.012231] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 2.012233] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.012234] usb usb8: Product: EHCI Host Controller [ 2.012236] usb usb8: Manufacturer: Linux 4.19.0-11-rt-amd64 ehci_hcd [ 2.012237] usb usb8: SerialNumber: 0000:00:1d.7 [ 2.012622] hub 8-0:1.0: USB hub found [ 2.012742] hub 8-0:1.0: 6 ports detected [ 2.040163] hub 5-0:1.0: USB hub found [ 2.040383] hub 5-0:1.0: 2 ports detected [ 2.045094] pci 0000:00:00.0: Intel Q45/Q43 Chipset [ 2.045122] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.045586] pci 0000:00:00.0: detected 131072K stolen memory [ 2.045621] [drm] Replacing VGA console driver [ 2.046231] Console: switching to colour dummy device 80x25 [ 2.046768] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.046769] [drm] Driver supports precise vblank timestamp query. [ 2.047293] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.056062] [drm] RC6 disabled, disabling runtime PM support [ 2.056698] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:d0:4c:bb:8a [ 2.056707] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.056775] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF [ 2.058224] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.072132] hub 6-0:1.0: USB hub found [ 2.072143] hub 6-0:1.0: 2 ports detected [ 2.090849] random: fast init done [ 2.100124] hub 7-0:1.0: USB hub found [ 2.100143] hub 7-0:1.0: 2 ports detected [ 2.139967] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 2.140212] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no) [ 2.140377] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2 [ 2.241276] i915 0000:00:02.0: VGA-1: EDID is invalid: [ 2.241282] [00] BAD 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.241284] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.241286] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.241288] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.241289] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.241291] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.241293] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.241295] [00] BAD ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.273220] fbcon: inteldrmfb (fb0) is primary device [ 2.296252] Console: switching to colour frame buffer device 170x48 [ 2.310615] ata4: SATA link down (SStatus 0 SControl 300) [ 2.315521] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.448084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.448292] ata1.00: ATA-11: KINGSTON SA400S37120G, SBFKB1D1, max UDMA/133 [ 2.448296] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.448490] ata1.00: configured for UDMA/133 [ 2.448755] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1D1 PQ: 0 ANSI: 5 [ 2.456069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.456593] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653F, LE05, max UDMA/33 [ 2.457397] ata2.00: configured for UDMA/33 [ 2.458958] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653F LE05 PQ: 0 ANSI: 5 [ 2.507667] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.507680] sd 0:0:0:0: [sda] Write Protect is off [ 2.507682] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.507699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.511991] sda: sda1 sda2 < sda5 > [ 2.512789] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.537938] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.537944] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.539851] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.560064] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 2.751100] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01 [ 2.751106] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.751109] usb 5-2: Product: USB Receiver [ 2.751112] usb 5-2: Manufacturer: Logitech [ 2.763513] hidraw: raw HID events driver (C) Jiri Kosina [ 2.778201] usbcore: registered new interface driver usbhid [ 2.778204] usbhid: USB HID core driver [ 2.782250] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2 [ 2.904211] input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3 [ 2.904406] input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input4 [ 2.904839] input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5 [ 2.904882] input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input6 [ 2.904935] hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:00:1d.0-2:1 [ 3.035331] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input10 [ 3.035574] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1d.0-2:1 [ 3.065215] PM: Image not found (code -22) [ 3.150967] cryptd: max_cpu_qlen set to 1000 [ 3.315318] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.610686] systemd[1]: Inserted module 'autofs4' [ 3.639262] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.656161] systemd[1]: Detected architecture x86-64. [ 3.659241] systemd[1]: Set hostname to . [ 3.837073] random: systemd: uninitialized urandom read (16 bytes read) [ 3.838938] random: systemd: uninitialized urandom read (16 bytes read) [ 3.839150] systemd[1]: Listening on udev Control Socket. [ 3.839225] random: systemd: uninitialized urandom read (16 bytes read) [ 3.840630] systemd[1]: Created slice User and Session Slice. [ 3.840834] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.841131] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.841813] systemd[1]: Created slice system-getty.slice. [ 3.841960] systemd[1]: Listening on udev Kernel Socket. [ 3.841997] systemd[1]: Reached target Slices. [ 3.890474] ec_master: loading out-of-tree module taints kernel. [ 3.890904] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 3.911975] EtherCAT: Master driver 1.5.2 unknown [ 3.913527] EtherCAT: 1 master waiting for devices. [ 3.920108] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown [ 3.920121] EtherCAT: Accepting 00:1F:D0:4C:BB:8A as main device for master 0. [ 3.920135] ec_generic: Binding socket to interface 2 (enp0s25). [ 3.936090] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.948137] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 4.313995] audit: type=1400 audit(1622092812.200:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=289 comm="apparmor_parser" [ 4.317238] audit: type=1400 audit(1622092812.204:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=288 comm="apparmor_parser" [ 4.333632] audit: type=1400 audit(1622092812.220:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=291 comm="apparmor_parser" [ 4.333650] audit: type=1400 audit(1622092812.220:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=291 comm="apparmor_parser" [ 4.340887] audit: type=1400 audit(1622092812.228:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=292 comm="apparmor_parser" [ 4.340904] audit: type=1400 audit(1622092812.228:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=292 comm="apparmor_parser" [ 4.356555] audit: type=1400 audit(1622092812.244:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=293 comm="apparmor_parser" [ 4.356560] audit: type=1400 audit(1622092812.244:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=293 comm="apparmor_parser" [ 4.356564] audit: type=1400 audit(1622092812.244:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=293 comm="apparmor_parser" [ 4.761474] tpm_tis 00:03: 1.2 TPM (device-id 0xFE, rev-id 70) [ 4.770867] tpm tpm0: TPM is disabled/deactivated (0x6) [ 4.960009] iTCO_vendor_support: vendor-support=0 [ 4.985913] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.987140] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060) [ 5.001335] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.201733] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.202103] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 5.211972] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.324159] intel_powerclamp: No package C-state available [ 5.388525] intel_powerclamp: No package C-state available [ 5.583290] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1882: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 5.583293] snd_hda_codec_analog hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) [ 5.583295] snd_hda_codec_analog hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 5.583296] snd_hda_codec_analog hdaudioC0D2: mono: mono_out=0x0 [ 5.583297] snd_hda_codec_analog hdaudioC0D2: inputs: [ 5.583300] snd_hda_codec_analog hdaudioC0D2: Front Mic=0x14 [ 5.583301] snd_hda_codec_analog hdaudioC0D2: Rear Mic=0x17 [ 5.583303] snd_hda_codec_analog hdaudioC0D2: Line=0x15 [ 5.583304] snd_hda_codec_analog hdaudioC0D2: CD=0x18 [ 5.653679] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.679820] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.686645] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 5.691754] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 5.695280] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 5.701471] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 5.874824] Adding 3634172k swap on /dev/sda5. Priority:-2 extents:1 across:3634172k SSFS [ 5.949320] systemd-journald[241]: Received request to flush runtime journal from PID 1 [ 13.505171] logitech-hidpp-device 0003:046D:404D.0004: HID++ 4.1 device connected. [ 13.989129] random: crng init done [ 13.989134] random: 7 urandom warning(s) missed due to ratelimiting [ 49.416920] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 49.417033] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 49.417104] EtherCAT 0: Link state of ecm0 changed to UP. [ 49.425205] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 49.429269] EtherCAT 0: 1 slave(s) responding on main device. [ 49.429273] EtherCAT 0: Slave states on main device: INIT. [ 49.430114] EtherCAT 0: Scanning bus. [ 49.507716] EtherCAT 0: Bus scanning completed in 76 ms. [ 49.507720] EtherCAT 0: Using slave main-0 as DC reference clock. [ 49.511777] EtherCAT 0: Slave states on main device: PREOP. [ 49.527986] EtherCAT 0: Slave states on main device: INIT. [ 49.552307] EtherCAT 0: Slave states on main device: PREOP. [ 104.770724] EtherCAT: Requesting master 0... [ 104.770729] EtherCAT: Successfully requested master 0. [ 104.771565] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 104.771568] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000c2969a2e. [ 104.775474] EtherCAT 0: Master thread exited. [ 104.775481] EtherCAT 0: Starting EtherCAT-OP thread. [ 105.594223] EtherCAT 0: Master thread exited. [ 105.594234] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 105.594297] EtherCAT 0: Releasing master... [ 105.594298] EtherCAT 0: Released. [ 105.595154] EtherCAT ERROR 0-main-0: Failed to receive DC times datagram: Datagram initialized. [ 105.607329] EtherCAT 0: Slave states on main device: INIT. [ 105.631670] EtherCAT 0: Slave states on main device: PREOP. [ 106.368293] EtherCAT WARNING: Datagram 00000000707e2cf2 (master-fsm) was SKIPPED 1 time. [ 148.108824] EtherCAT: Requesting master 0... [ 148.108828] EtherCAT: Successfully requested master 0. [ 148.109606] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 148.109609] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000009a67ec8b. [ 148.110959] EtherCAT 0: Master thread exited. [ 148.110964] EtherCAT 0: Starting EtherCAT-OP thread. [ 149.086898] EtherCAT 0: Master thread exited. [ 149.086910] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 149.086982] EtherCAT 0: Releasing master... [ 149.086983] EtherCAT 0: Released. [ 149.100144] EtherCAT 0: Slave states on main device: INIT. [ 149.124435] EtherCAT 0: Slave states on main device: PREOP. [ 273.455568] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 328.748911] perf: interrupt took too long (3141 > 3137), lowering kernel.perf_event_max_sample_rate to 63500 [ 331.947875] EtherCAT: Requesting master 0... [ 331.947880] EtherCAT: Successfully requested master 0. [ 331.949847] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 331.950082] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000ca3f5e1a. [ 331.953012] EtherCAT 0: Master thread exited. [ 331.953016] EtherCAT 0: Starting EtherCAT-OP thread. [ 332.848209] EtherCAT 0: Master thread exited. [ 332.848219] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 332.848298] EtherCAT 0: Releasing master... [ 332.848300] EtherCAT 0: Released. [ 332.861492] EtherCAT 0: Slave states on main device: INIT. [ 332.886518] EtherCAT 0: Slave states on main device: PREOP. [ 431.366154] perf: interrupt took too long (3937 > 3926), lowering kernel.perf_event_max_sample_rate to 50750 [ 440.534316] EtherCAT: Requesting master 0... [ 440.534320] EtherCAT: Successfully requested master 0. [ 440.535166] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 440.535169] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000007f24696e. [ 440.535385] EtherCAT 0: Master thread exited. [ 440.535388] EtherCAT 0: Starting EtherCAT-OP thread. [ 448.002011] EtherCAT 0: Master thread exited. [ 448.002022] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 448.002101] EtherCAT 0: Releasing master... [ 448.002103] EtherCAT 0: Released. [ 448.015406] EtherCAT 0: Slave states on main device: INIT. [ 448.039786] EtherCAT 0: Slave states on main device: PREOP. [ 465.177224] EtherCAT: Requesting master 0... [ 465.177232] EtherCAT: Successfully requested master 0. [ 465.177759] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 465.177762] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000008bdce704. [ 465.178547] EtherCAT 0: Master thread exited. [ 465.178552] EtherCAT 0: Starting EtherCAT-OP thread. [ 471.001525] EtherCAT 0: Master thread exited. [ 471.001538] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 471.005917] EtherCAT 0: Releasing master... [ 471.005921] EtherCAT 0: Released. [ 471.022704] EtherCAT 0: Slave states on main device: INIT. [ 471.047057] EtherCAT 0: Slave states on main device: PREOP. [ 501.088833] EtherCAT: Requesting master 0... [ 501.088837] EtherCAT: Successfully requested master 0. [ 501.089652] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 501.089654] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000006de4f319. [ 501.091052] EtherCAT 0: Master thread exited. [ 501.091057] EtherCAT 0: Starting EtherCAT-OP thread. [ 511.466778] EtherCAT 0: Master thread exited. [ 511.466806] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 511.466869] EtherCAT 0: Releasing master... [ 511.466871] EtherCAT 0: Released. [ 511.480136] EtherCAT 0: Slave states on main device: INIT. [ 511.504514] EtherCAT 0: Slave states on main device: PREOP. [ 536.793899] EtherCAT: Requesting master 0... [ 536.793903] EtherCAT: Successfully requested master 0. [ 536.794697] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 536.794700] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000c3d66fcd. [ 536.795091] EtherCAT 0: Master thread exited. [ 536.795094] EtherCAT 0: Starting EtherCAT-OP thread. [ 537.714254] EtherCAT 0: Master thread exited. [ 537.714265] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 537.714354] EtherCAT 0: Releasing master... [ 537.714356] EtherCAT 0: Released. [ 537.727568] EtherCAT 0: Slave states on main device: INIT. [ 537.752168] EtherCAT 0: Slave states on main device: PREOP. [ 677.285060] EtherCAT: Requesting master 0... [ 677.285063] EtherCAT: Successfully requested master 0. [ 677.285854] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 677.285857] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 0000000033713eb3. [ 677.290003] EtherCAT 0: Master thread exited. [ 677.290008] EtherCAT 0: Starting EtherCAT-OP thread. [ 678.136632] EtherCAT 0: Master thread exited. [ 678.136660] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 678.136722] EtherCAT 0: Releasing master... [ 678.136723] EtherCAT 0: Released. [ 678.149956] EtherCAT 0: Slave states on main device: INIT. [ 678.174235] EtherCAT 0: Slave states on main device: PREOP. [ 730.269592] EtherCAT: Requesting master 0... [ 730.269597] EtherCAT: Successfully requested master 0. [ 730.270204] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 730.270207] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000c86e13c7. [ 730.273621] EtherCAT 0: Master thread exited. [ 730.273625] EtherCAT 0: Starting EtherCAT-OP thread. [ 731.111816] EtherCAT 0: Master thread exited. [ 731.111828] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 731.111905] EtherCAT 0: Releasing master... [ 731.111907] EtherCAT 0: Released. [ 731.126146] EtherCAT 0: Slave states on main device: INIT. [ 731.150458] EtherCAT 0: Slave states on main device: PREOP. [ 762.228723] EtherCAT: Requesting master 0... [ 762.228727] EtherCAT: Successfully requested master 0. [ 762.229225] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 762.229228] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000c08adb5d. [ 762.230828] EtherCAT 0: Master thread exited. [ 762.230833] EtherCAT 0: Starting EtherCAT-OP thread. [ 762.840145] EtherCAT 0: Master thread exited. [ 762.840157] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 762.840220] EtherCAT 0: Releasing master... [ 762.840221] EtherCAT 0: Released. [ 762.853255] EtherCAT 0: Slave states on main device: INIT. [ 762.877578] EtherCAT 0: Slave states on main device: PREOP. [ 762.897845] EtherCAT 0: 0 slave(s) responding on main device. [ 762.901930] EtherCAT 0: 1 slave(s) responding on main device. [ 762.901934] EtherCAT 0: Slave states on main device: PREOP. [ 762.902975] EtherCAT 0: Scanning bus. [ 762.973417] EtherCAT 0: Bus scanning completed in 72 ms. [ 762.973420] EtherCAT 0: Using slave main-0 as DC reference clock. [ 762.993555] EtherCAT 0: Slave states on main device: INIT. [ 763.017699] EtherCAT 0: Slave states on main device: PREOP. [ 804.426750] EtherCAT: Requesting master 0... [ 804.426771] EtherCAT: Successfully requested master 0. [ 804.427391] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 804.427394] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000d063908f. [ 804.428112] EtherCAT 0: Master thread exited. [ 804.428115] EtherCAT 0: Starting EtherCAT-OP thread. [ 804.429006] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 804.429008] EtherCAT WARNING 0: 1 datagram UNMATCHED! [ 805.036102] EtherCAT 0: Master thread exited. [ 805.036113] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 805.036178] EtherCAT 0: Releasing master... [ 805.036180] EtherCAT 0: Released. [ 805.049223] EtherCAT 0: Slave states on main device: INIT. [ 805.073542] EtherCAT 0: Slave states on main device: PREOP. [ 844.536093] EtherCAT: Requesting master 0... [ 844.536097] EtherCAT: Successfully requested master 0. [ 844.536858] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 844.536877] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 0000000095587876. [ 844.538611] EtherCAT 0: Master thread exited. [ 844.538614] EtherCAT 0: Starting EtherCAT-OP thread. [ 845.376927] EtherCAT 0: Master thread exited. [ 845.376938] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 845.377016] EtherCAT 0: Releasing master... [ 845.377018] EtherCAT 0: Released. [ 845.390246] EtherCAT 0: Slave states on main device: INIT. [ 845.414525] EtherCAT 0: Slave states on main device: PREOP. [ 941.936279] EtherCAT: Requesting master 0... [ 941.936284] EtherCAT: Successfully requested master 0. [ 941.936933] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 941.936936] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000009f33163c. [ 941.939310] EtherCAT 0: Master thread exited. [ 941.939313] EtherCAT 0: Starting EtherCAT-OP thread. [ 942.830397] EtherCAT 0: Master thread exited. [ 942.830408] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 942.830472] EtherCAT 0: Releasing master... [ 942.830474] EtherCAT 0: Released. [ 942.843505] EtherCAT 0: Slave states on main device: INIT. [ 942.867829] EtherCAT 0: Slave states on main device: PREOP. [ 991.702525] EtherCAT: Requesting master 0... [ 991.702858] EtherCAT: Successfully requested master 0. [ 991.703295] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 991.703298] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000004187da0c. [ 991.705757] EtherCAT 0: Master thread exited. [ 991.705763] EtherCAT 0: Starting EtherCAT-OP thread. [ 992.912838] EtherCAT 0: Master thread exited. [ 992.912850] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 992.917796] EtherCAT 0: Releasing master... [ 992.917894] EtherCAT 0: Released. [ 992.930931] EtherCAT 0: Slave states on main device: INIT. [ 992.955142] EtherCAT 0: Slave states on main device: PREOP. [ 1656.483044] EtherCAT: Requesting master 0... [ 1656.483052] EtherCAT: Successfully requested master 0. [ 1656.483538] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 1656.483543] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000f3d8c5e8. [ 1656.484848] EtherCAT 0: Master thread exited. [ 1656.484853] EtherCAT 0: Starting EtherCAT-OP thread. [ 1657.949040] EtherCAT 0: Master thread exited. [ 1657.949052] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 1657.956065] EtherCAT 0: Releasing master... [ 1657.956067] EtherCAT 0: Released. [ 1657.970330] EtherCAT 0: Slave states on main device: INIT. [ 1657.994539] EtherCAT 0: Slave states on main device: PREOP. [ 1748.036832] EtherCAT 0-main-0: Requesting slave reboot [ 1748.037918] EtherCAT ERROR 0-main-0: Failed to reboot 1 [ 1748.037922] No response. [ 1748.037924] EtherCAT ERROR 0-main-0: Failed to reboot. [ 1782.921104] EtherCAT: Requesting master 0... [ 1782.921108] EtherCAT: Successfully requested master 0. [ 1782.922047] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 1782.922054] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 0000000071a89563. [ 1782.925096] EtherCAT 0: Master thread exited. [ 1782.925102] EtherCAT 0: Starting EtherCAT-OP thread. [ 1784.565334] EtherCAT 0: Master thread exited. [ 1784.565346] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 1784.573216] EtherCAT 0: Releasing master... [ 1784.573218] EtherCAT 0: Released. [ 1784.586252] EtherCAT 0: Slave states on main device: INIT. [ 1784.610449] EtherCAT 0: Slave states on main device: PREOP. [ 1837.112726] EtherCAT: Requesting master 0... [ 1837.112731] EtherCAT: Successfully requested master 0. [ 1837.113237] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 1837.113239] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000afa932be. [ 1837.117246] EtherCAT 0: Master thread exited. [ 1837.117251] EtherCAT 0: Starting EtherCAT-OP thread. [ 1846.132100] EtherCAT 0: Master thread exited. [ 1846.132112] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 1846.137689] EtherCAT 0: Releasing master... [ 1846.137691] EtherCAT 0: Released. [ 1846.149878] EtherCAT 0: Slave states on main device: INIT. [ 1846.174102] EtherCAT 0: Slave states on main device: PREOP. [ 2281.957654] EtherCAT: Requesting master 0... [ 2281.957658] EtherCAT: Successfully requested master 0. [ 2281.957795] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 2281.957797] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000001486b879. [ 2281.961290] EtherCAT 0: Master thread exited. [ 2281.961293] EtherCAT 0: Starting EtherCAT-OP thread. [ 2283.020654] EtherCAT 0: Master thread exited. [ 2283.020666] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 2283.028066] EtherCAT 0: Releasing master... [ 2283.028069] EtherCAT 0: Released. [ 2283.056210] EtherCAT 0: Slave states on main device: INIT. [ 2283.080668] EtherCAT 0: Slave states on main device: PREOP. [ 2456.748084] intel_powerclamp: No package C-state available [ 2459.607238] EtherCAT 0: Master thread exited. [ 2459.607254] EtherCAT 0: Releasing main device 00:1F:D0:4C:BB:8A. [ 2459.624072] ec_generic: Unloading. [ 2459.656505] EtherCAT: Master module cleaned up. [ 2459.880220] EtherCAT: Master driver 1.5.2 unknown [ 2459.880334] EtherCAT: 1 master waiting for devices. [ 2459.898748] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown [ 2459.898762] EtherCAT: Accepting 00:1F:D0:4C:BB:8A as main device for master 0. [ 2459.898776] ec_generic: Binding socket to interface 2 (enp0s25). [ 2459.920086] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 2459.924392] EtherCAT 0: Link state of ecm0 changed to UP. [ 2459.929339] EtherCAT 0: 1 slave(s) responding on main device. [ 2459.929342] EtherCAT 0: Slave states on main device: PREOP. [ 2459.930113] EtherCAT 0: Scanning bus. [ 2460.001430] EtherCAT 0: Bus scanning completed in 72 ms. [ 2460.001434] EtherCAT 0: Using slave main-0 as DC reference clock. [ 2460.021621] EtherCAT 0: Slave states on main device: INIT. [ 2460.045939] EtherCAT 0: Slave states on main device: PREOP. [ 2548.295734] EtherCAT 0: Master thread exited. [ 2548.295751] EtherCAT 0: Releasing main device 00:1F:D0:4C:BB:8A. [ 2548.308055] ec_generic: Unloading. [ 2548.341268] EtherCAT: Master module cleaned up. [ 2548.540990] EtherCAT: Master driver 1.5.2 unknown [ 2548.542628] EtherCAT: 1 master waiting for devices. [ 2548.564063] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown [ 2548.564077] EtherCAT: Accepting 00:1F:D0:4C:BB:8A as main device for master 0. [ 2548.564090] ec_generic: Binding socket to interface 2 (enp0s25). [ 2548.584043] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 2548.588253] EtherCAT 0: Link state of ecm0 changed to UP. [ 2548.592803] EtherCAT 0: 1 slave(s) responding on main device. [ 2548.592805] EtherCAT 0: Slave states on main device: PREOP. [ 2548.593621] EtherCAT 0: Scanning bus. [ 2548.666204] EtherCAT 0: Bus scanning completed in 72 ms. [ 2548.666209] EtherCAT 0: Using slave main-0 as DC reference clock. [ 2548.686492] EtherCAT 0: Slave states on main device: INIT. [ 2548.710815] EtherCAT 0: Slave states on main device: PREOP. [ 2656.097331] EtherCAT: Requesting master 0... [ 2656.097336] EtherCAT: Successfully requested master 0. [ 2656.097924] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 2656.097927] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 00000000c08adb5d. [ 2656.099121] EtherCAT 0: Master thread exited. [ 2656.099125] EtherCAT 0: Starting EtherCAT-OP thread. [ 2670.465620] EtherCAT 0: Master thread exited. [ 2670.465632] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 2670.471121] EtherCAT 0: Releasing master... [ 2670.471124] EtherCAT 0: Released. [ 2670.484925] EtherCAT 0: Slave states on main device: INIT. [ 2670.509154] EtherCAT 0: Slave states on main device: PREOP. [ 2797.356236] EtherCAT: Requesting master 0... [ 2797.356241] EtherCAT: Successfully requested master 0. [ 2797.356850] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 2797.356854] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000008bb8f134. [ 2797.357681] EtherCAT 0: Master thread exited. [ 2797.357687] EtherCAT 0: Starting EtherCAT-OP thread. [ 2813.888955] EtherCAT 0: Master thread exited. [ 2813.888964] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 2813.898630] EtherCAT 0: Releasing master... [ 2813.898632] EtherCAT 0: Released. [ 2813.899190] EtherCAT ERROR 0-main-0: Failed to receive DC times datagram: Datagram initialized. [ 2813.911296] EtherCAT 0: Slave states on main device: INIT. [ 2813.935505] EtherCAT 0: Slave states on main device: PREOP. [ 2814.657234] EtherCAT WARNING: Datagram 000000007b728a79 (master-fsm) was SKIPPED 1 time. [ 2854.056038] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 2854.213191] usb 1-2: New USB device found, idVendor=125f, idProduct=312b, bcdDevice= a.00 [ 2854.213194] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2854.213195] usb 1-2: Product: ADATA USB Flash Drive [ 2854.213197] usb 1-2: Manufacturer: ADATA [ 2854.213198] usb 1-2: SerialNumber: 000000000000001832 [ 2854.316876] usb-storage 1-2:1.0: USB Mass Storage device detected [ 2854.348071] scsi host6: usb-storage 1-2:1.0 [ 2854.348232] usbcore: registered new interface driver usb-storage [ 2854.368126] usbcore: registered new interface driver uas [ 2855.368717] scsi 6:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6 [ 2855.371231] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2855.371580] sd 6:0:0:0: [sdb] 30869504 512-byte logical blocks: (15.8 GB/14.7 GiB) [ 2855.371950] sd 6:0:0:0: [sdb] Write Protect is off [ 2855.371952] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2855.373103] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 2855.379702] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2983.332766] EtherCAT: Requesting master 0... [ 2983.332771] EtherCAT: Successfully requested master 0. [ 2983.333335] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 2983.333338] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW at 000000004046ed4a. [ 2983.335557] EtherCAT 0: Master thread exited. [ 2983.335562] EtherCAT 0: Starting EtherCAT-OP thread. [ 3003.540356] EtherCAT 0: Master thread exited. [ 3003.540366] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 3003.552073] EtherCAT 0: Releasing master... [ 3003.552075] EtherCAT 0: Released. [ 3003.553040] EtherCAT ERROR 0-main-0: Failed to receive DC times datagram: Datagram initialized. [ 3003.565169] EtherCAT 0: Slave states on main device: INIT. [ 3003.589373] EtherCAT 0: Slave states on main device: PREOP. [ 3004.428424] EtherCAT WARNING: Datagram 000000007b728a79 (master-fsm) was SKIPPED 1 time. root@debian:/home/moriseiki#