Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.0~pre1 Machine configuration directory is '/home/bridgeport/linuxcnc/configs/my_LinuxCNC_machine' Machine configuration file is 'my_LinuxCNC_machine.ini' INIFILE=/home/bridgeport/linuxcnc/configs/my_LinuxCNC_machine/my_LinuxCNC_machine.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./my_LinuxCNC_machine.hal Shutting down and cleaning up LinuxCNC... Running HAL shutdown script hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:13:04:f2 hm2_eth: discovered 7I92 hm2/hm2_7i92.0: Smart Serial Firmware Version 43 Board hm2_7i92.0.7i77.0.0 Hardware Mode 0 = standard Board hm2_7i92.0.7i77.0.0 Software Mode 0 = input_output Board hm2_7i92.0.7i77.0.0 Software Mode 1 = io_analog Board hm2_7i92.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage Board hm2_7i92.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage Board hm2_7i92.0.7i77.0.1 Hardware Mode 0 = standard Board hm2_7i92.0.7i77.0.1 Software Mode 0 = analogout_enables hm2/hm2_7i92.0: 34 I/O Pins used: hm2/hm2_7i92.0: IO Pin 000 (P2-01): IOPort hm2/hm2_7i92.0: IO Pin 001 (P2-14): IOPort hm2/hm2_7i92.0: IO Pin 002 (P2-02): IOPort hm2/hm2_7i92.0: IO Pin 003 (P2-15): Smart Serial Interface #0, pin TxData1 (Output) hm2/hm2_7i92.0: IO Pin 004 (P2-03): Smart Serial Interface #0, pin RxData1 (Input) hm2/hm2_7i92.0: IO Pin 005 (P2-16): Smart Serial Interface #0, pin TxData0 (Output) hm2/hm2_7i92.0: IO Pin 006 (P2-04): Smart Serial Interface #0, pin RxData0 (Input) hm2/hm2_7i92.0: IO Pin 007 (P2-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i92.0: IO Pin 008 (P2-05): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i92.0: IO Pin 009 (P2-06): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i92.0: IO Pin 010 (P2-07): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i92.0: IO Pin 011 (P2-08): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i92.0: IO Pin 012 (P2-09): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i92.0: IO Pin 013 (P2-10): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i92.0: IO Pin 014 (P2-11): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_7i92.0: IO Pin 015 (P2-12): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_7i92.0: IO Pin 016 (P2-13): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_7i92.0: IO Pin 017 (P1-01): IOPort hm2/hm2_7i92.0: IO Pin 018 (P1-14): IOPort hm2/hm2_7i92.0: IO Pin 019 (P1-02): IOPort hm2/hm2_7i92.0: IO Pin 020 (P1-15): IOPort hm2/hm2_7i92.0: IO Pin 021 (P1-03): IOPort hm2/hm2_7i92.0: IO Pin 022 (P1-16): IOPort hm2/hm2_7i92.0: IO Pin 023 (P1-04): IOPort hm2/hm2_7i92.0: IO Pin 024 (P1-17): IOPort hm2/hm2_7i92.0: IO Pin 025 (P1-05): IOPort hm2/hm2_7i92.0: IO Pin 026 (P1-06): IOPort hm2/hm2_7i92.0: IO Pin 027 (P1-07): IOPort hm2/hm2_7i92.0: IO Pin 028 (P1-08): IOPort hm2/hm2_7i92.0: IO Pin 029 (P1-09): IOPort hm2/hm2_7i92.0: IO Pin 030 (P1-10): IOPort hm2/hm2_7i92.0: IO Pin 031 (P1-11): IOPort hm2/hm2_7i92.0: IO Pin 032 (P1-12): IOPort hm2/hm2_7i92.0: IO Pin 033 (P1-13): IOPort hm2/hm2_7i92.0: registered hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime ./my_LinuxCNC_machine.hal:30: parameter or pin 'hm2_7i92.0.dpll.01.timer-us' not found 4677 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Thu Dec 3 10:25:11 PST 2020 UTC Date: Thu Dec 3 18:25:11 UTC 2020 this program: /usr/bin/linuxcnc_info uptime: 10:25:11 up 19 min, 1 user, load average: 0.77, 0.60, 0.40 lsb_release -sa: LinuxMint Linux Mint 19.1 Tessa 19.1 tessa which linuxcnc: /usr/bin/linuxcnc pwd: /home/bridgeport/linuxcnc/configs/my_LinuxCNC_machine USER: bridgeport LOGNAME: bridgeport HOME: /home/bridgeport EDITOR: VISUAL: LANGUAGE: en_US TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: mate display size: 1280x1024 pixels (338x270 millimeters) PATH: /usr/bin:/home/bridgeport/linuxcnc/configs/my_LinuxCNC_machine/bin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games uname items: nodename -n: LinuxCNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.67-2+deb10u2 (2019-11-11) machine -m: x86_64 processor -p: x86_64 platform -i: x86_64 oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-rt-amd64 root=UUID=ef62d09a-8b12-4c28-8be5-1006a77bc365 ro quiet splash vt.handoff=1 model name: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz cores: 4 cpu MHz: 1004.071 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial Versions: gcc: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 python: Python 2.7.17 git: git version 2.17.1 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.0~pre1 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===============-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.8.0~pre1 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) ii linuxcnc-uspace 1:2.8.0~pre1 amd64 motion controller for CNC machines and robots