Verbose mode on
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.5
LINUXCNC - 2.8.0-pre1-4572-g677d7b5

lspci -vvv

04:04.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01)
	Subsystem: LSI Logic / Symbios Logic 1P2S
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 1070 [size=8]
	Region 1: I/O ports at 1068 [size=8]
	Region 2: I/O ports at 1060 [size=8]
	Region 3: I/O ports at 1058 [size=8]
	Region 4: I/O ports at 1050 [size=8]
	Region 5: I/O ports at 1040 [size=16]
	Kernel driver in use: parport_serial


dmesg | grep par

[    0.004102] AppArmor: AppArmor disabled by boot time parameter
[    0.138523] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    6.598860] PM: Hibernation image partition 8:5 present
[    7.142812] parport_pc 00:09: reported by Plug and Play ACPI
[    7.142845] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[    7.266986] parport1: PC-style at 0x1060, irq 18 [PCSPP,TRISTATE,EPP]
[   10.984146] lp0: using parport0 (interrupt-driven).
[   10.984905] lp1: using parport1 (interrupt-driven).
[   10.996061] ppdev: user-space parallel port driver

debian 7 wheezy