Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.5 LINUXCNC - 2.7.11 Machine configuration directory is '/home/linuxcnc/linuxcnc/configs/test_setup' Machine configuration file is 'test_setup.ini' INIFILE=/home/linuxcnc/linuxcnc/configs/test_setup/test_setup.ini PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./test_setup.hal hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:10:40:d6 hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): IOPort hm2/hm2_7i76e.0: IO Pin 005 (P1-16): IOPort hm2/hm2_7i76e.0: IO Pin 006 (P1-04): IOPort hm2/hm2_7i76e.0: IO Pin 007 (P1-17): IOPort hm2/hm2_7i76e.0: IO Pin 008 (P1-05): IOPort hm2/hm2_7i76e.0: IO Pin 009 (P1-06): IOPort hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin TxData0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin RxData0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Encoder #0, pin Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Encoder #0, pin B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Encoder #0, pin A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): IOPort hm2/hm2_7i76e.0: IO Pin 028 (P2-08): IOPort hm2/hm2_7i76e.0: IO Pin 029 (P2-09): IOPort hm2/hm2_7i76e.0: IO Pin 030 (P2-10): IOPort hm2/hm2_7i76e.0: IO Pin 031 (P2-11): IOPort hm2/hm2_7i76e.0: IO Pin 032 (P2-12): IOPort hm2/hm2_7i76e.0: IO Pin 033 (P2-13): IOPort hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis Embeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -x 52428949 -U --catalog=lathe /home/linuxcnc/NewNativeCam/ncam.ui" exited with error: 1 Shutting down and cleaning up LinuxCNC... module 'lathehandler' skipped - import error: No module named rsvg Xlib.protocol.request.QueryExtension Xlib.protocol.request.QueryExtension Running HAL shutdown script Killing task linuxcncsvr, PID=6430 Killing task milltask, PID=6480 task: 328 cycles, min=0.000015, max=0.021867, avg=0.009482, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime sched_setaffinity: Invalid argument (gladevcp:6491): libglade-WARNING **: Expected . Got . (gladevcp:6491): libglade-WARNING **: did not finish in PARSER_FINISH state **** GLADE VCP ERROR: With xml file: /home/linuxcnc/NewNativeCam/ncam.ui : could not create GladeXML object :0: gladevcp exited without becoming ready /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'on_destroy' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'show_keyb' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_convert_click' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_number_click' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_pm_click' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_prev_click' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_clear_click' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_del_click' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_cancel_click' builder.connect_signals(handlers) /usr/bin/gladevcp:212: RuntimeWarning: missing handler 'keyb_ok_click' builder.connect_signals(handlers) /usr/bin/gladevcp:295: GtkWarning: GdkWindow 0x3400003 unexpectedly destroyed gtk.main() **** GLADE VCP ERROR: X Protocol Error: 3 6430 PID TTY STAT TIME COMMAND 6480 PID TTY STAT TIME COMMAND Stopping realtime threads Unloading hal components Note: Using POSIX realtime Kernel message information: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-rt-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT RT Debian 3.2.82-1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7c0000 (usable) [ 0.000000] BIOS-e820: 000000007f7c0000 - 000000007f7ce000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f7ce000 - 000000007f800000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: MSI MS-7267/MS-7267, BIOS V17.5 10/08/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f7c0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000 [ 0.000000] RAMDISK: 365c0000 - 372d8000 [ 0.000000] ACPI: RSDP 0x00000000000F9ED0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000007F7C0000 00038 (v01 A M I OEMRSDT 10000708 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000007F7C0200 00084 (v02 A M I OEMFACP 10000708 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000007F7C0440 04F33 (v01 1AAAA 1AAAA000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 0x000000007F7CE000 00040 [ 0.000000] ACPI: APIC 0x000000007F7C0390 0006C (v01 A M I OEMAPIC 10000708 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000007F7C0400 0003C (v01 A M I OEMMCFG 10000708 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000007F7CE040 00056 (v01 A M I AMI_OEM 10000708 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000007F7CE9C0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1149MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007f7c0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f7c0 [ 0.000000] On node 0 totalpages: 522063 [ 0.000000] free_area_init_node: node 0, pgdat c1415440, node_mem_map f55d0200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2300 pages used for memmap [ 0.000000] HighMem zone: 292038 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 93 pages/cpu @f786e000 s360192 r0 d20736 u380928 [ 0.000000] pcpu-alloc: s360192 r0 d20736 u380928 alloc=93*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517983 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-rt-686-pae root=UUID=3d04dede-b035-486a-a829-a90b01937ee9 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f7c0) [ 0.000000] Memory: 2050056k/2088704k available (2865k kernel code, 38196k reserved, 1345k data, 728k init, 1177352k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc141d000 - 0xc14d3000 ( 728 kB) [ 0.000000] .data : 0xc12cc5a0 - 0xc141cac0 (1345 kB) [ 0.000000] .text : 0xc1000000 - 0xc12cc5a0 (2865 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2394.208 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.41 BogoMIPS (lpj=9576832) [ 0.004006] pid_max: default: 32768 minimum: 301 [ 0.004061] Security Framework initialized [ 0.004068] AppArmor: AppArmor disabled by boot time parameter [ 0.004088] Mount-cache hash table entries: 512 [ 0.004240] Initializing cgroup subsys cpuacct [ 0.004245] Initializing cgroup subsys memory [ 0.004255] Initializing cgroup subsys devices [ 0.004257] Initializing cgroup subsys freezer [ 0.004258] Initializing cgroup subsys net_cls [ 0.004260] Initializing cgroup subsys blkio [ 0.004266] Initializing cgroup subsys perf_event [ 0.004300] CPU: Physical Processor ID: 0 [ 0.004301] CPU: Processor Core ID: 0 [ 0.004304] mce: CPU supports 6 MCE banks [ 0.004312] CPU0: Thermal monitoring enabled (TM2) [ 0.004318] using mwait in idle threads. [ 0.004638] ACPI: Core revision 20110623 [ 0.012062] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.053690] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d [ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.056003] PEBS disabled due to CPU errata. [ 0.056003] ... version: 2 [ 0.056003] ... bit width: 40 [ 0.056003] ... generic registers: 2 [ 0.056003] ... value mask: 000000ffffffffff [ 0.056003] ... max period: 000000007fffffff [ 0.056003] ... fixed-purpose events: 3 [ 0.056003] ... event mask: 0000000700000003 [ 0.072392] NMI watchdog enabled, takes one hw-pmu counter. [ 0.092054] CPU 1 irqstacks, hard=f50f2000 soft=f50f4000 [ 0.092059] Booting Node 0, Processors #1 [ 0.092065] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.184054] NMI watchdog enabled, takes one hw-pmu counter. [ 0.188030] Brought up 2 CPUs [ 0.188035] Total of 2 processors activated (9576.66 BogoMIPS). [ 0.189470] devtmpfs: initialized [ 0.189470] PM: Registering ACPI NVS region at 7f7ce000 (204800 bytes) [ 0.189470] print_constraints: dummy: [ 0.189470] NET: Registered protocol family 16 [ 0.189470] ACPI: bus type pci registered [ 0.189470] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.189470] PCI: not using MMCONFIG [ 0.189470] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. [ 0.189470] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.189470] PCI: Using configuration type 1 for base access [ 0.189470] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.189470] mtrr: probably your BIOS does not setup all CPUs. [ 0.189470] mtrr: corrected configuration. [ 0.189740] bio: create slab at 0 [ 0.189740] ACPI: Added _OSI(Module Device) [ 0.189740] ACPI: Added _OSI(Processor Device) [ 0.189740] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.189740] ACPI: Added _OSI(Processor Aggregator Device) [ 0.193094] ACPI: EC: Look up EC in DSDT [ 0.193644] ACPI: Executed 1 blocks of module-level executable AML code [ 0.199800] ACPI: SSDT 0x000000007F7CE0A0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.200117] ACPI: Dynamic OEM Table Load: [ 0.200121] ACPI: SSDT 0x0000000000000000 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.200730] ACPI: SSDT 0x000000007F7CE530 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 0.201030] ACPI: Dynamic OEM Table Load: [ 0.201033] ACPI: SSDT 0x0000000000000000 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 0.201532] ACPI: Interpreter enabled [ 0.201538] ACPI: (supports S0 S1 S4 S5) [ 0.201574] ACPI: Using IOAPIC for interrupt routing [ 0.201608] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.205729] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources [ 0.205734] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) [ 0.205736] PCI: Using MMCONFIG for extended config space [ 0.215344] ACPI: No dock devices found. [ 0.215347] HEST: Table not found. [ 0.215352] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.215458] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.215689] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.215693] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.215696] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.215699] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.215702] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xffffffff] (ignored) [ 0.215716] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600 [ 0.215766] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300 [ 0.215778] pci 0000:00:02.0: reg 10: [mem 0xcfe80000-0xcfefffff] [ 0.215784] pci 0000:00:02.0: reg 14: [io 0xec00-0xec07] [ 0.215791] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref] [ 0.215798] pci 0000:00:02.0: reg 1c: [mem 0xcfe40000-0xcfe7ffff] [ 0.215873] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.215890] pci 0000:00:1b.0: reg 10: [mem 0xcfe3c000-0xcfe3ffff 64bit] [ 0.215962] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.215986] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.216076] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.216107] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.216182] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.216208] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604 [ 0.216282] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.216309] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.216351] pci 0000:00:1d.0: reg 20: [io 0xe880-0xe89f] [ 0.216384] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.216426] pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f] [ 0.216460] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.216502] pci 0000:00:1d.2: reg 20: [io 0xe480-0xe49f] [ 0.216536] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.216578] pci 0000:00:1d.3: reg 20: [io 0xe400-0xe41f] [ 0.216621] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.216641] pci 0000:00:1d.7: reg 10: [mem 0xcfe3bc00-0xcfe3bfff] [ 0.216726] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.216747] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.216815] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 [ 0.216900] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.216912] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.216958] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 0.216971] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.216981] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.216991] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] [ 0.217001] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] [ 0.217011] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.217050] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101 [ 0.217065] pci 0000:00:1f.2: reg 10: [io 0xe080-0xe087] [ 0.217073] pci 0000:00:1f.2: reg 14: [io 0xe000-0xe003] [ 0.217082] pci 0000:00:1f.2: reg 18: [io 0xdc00-0xdc07] [ 0.217091] pci 0000:00:1f.2: reg 1c: [io 0xd880-0xd883] [ 0.217100] pci 0000:00:1f.2: reg 20: [io 0xd800-0xd80f] [ 0.217137] pci 0000:00:1f.2: PME# supported from D3hot [ 0.217153] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.217206] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.217281] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.217359] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.217379] pci 0000:02:00.0: reg 10: [io 0xb800-0xb8ff] [ 0.217412] pci 0000:02:00.0: reg 18: [mem 0xcfaff000-0xcfafffff 64bit] [ 0.217450] pci 0000:02:00.0: reg 30: [mem 0xcfac0000-0xcfadffff pref] [ 0.217534] pci 0000:02:00.0: supports D1 D2 [ 0.217536] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.217560] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.217571] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.217576] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.217580] pci 0000:00:1c.1: bridge window [mem 0xcfa00000-0xcfafffff] [ 0.217644] pci 0000:03:00.0: [168c:0032] type 0 class 0x000280 [ 0.217668] pci 0000:03:00.0: reg 10: [mem 0xcfc80000-0xcfcfffff 64bit] [ 0.217722] pci 0000:03:00.0: reg 30: [mem 0xcfc70000-0xcfc7ffff pref] [ 0.217778] pci 0000:03:00.0: supports D1 D2 [ 0.217781] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.224033] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.224044] pci 0000:00:1c.3: bridge window [mem 0xcfb00000-0xcfcfffff] [ 0.224109] pci 0000:04:00.0: [13f6:0111] type 0 class 0x000401 [ 0.224136] pci 0000:04:00.0: reg 10: [io 0xc800-0xc8ff] [ 0.224234] pci 0000:04:00.0: supports D1 D2 [ 0.224281] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) [ 0.224286] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.224294] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.224297] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.224317] pci_bus 0000:00: on NUMA node 0 [ 0.224321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.224592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.224667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.224746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.224852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.224970] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.224974] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.224976] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.232455] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.232537] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.232617] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.232696] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.232775] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.232855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.232936] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.233019] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.233101] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.233101] vgaarb: loaded [ 0.233101] vgaarb: bridge control possible 0000:00:02.0 [ 0.233101] PCI: Using ACPI for IRQ routing [ 0.233101] PCI: pci_cache_line_size set to 64 bytes [ 0.233101] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.233101] reserve RAM buffer: 000000007f7c0000 - 000000007fffffff [ 0.233101] hpet clockevent registered [ 0.233101] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.233101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.233101] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.240064] AMD NB: Cannot enumerate AMD northbridges. [ 0.240071] Switching to clocksource hpet [ 0.243502] pnp: PnP ACPI init [ 0.243521] ACPI: bus type pnp registered [ 0.243638] pnp 00:00: [bus 00-ff] [ 0.243642] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.243645] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.243648] pnp 00:00: [io 0x0d00-0xffff window] [ 0.243650] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.243653] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.243656] pnp 00:00: [mem 0x7f800000-0xffffffff window] [ 0.243722] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.243737] pnp 00:01: [mem 0xfed13000-0xfed19fff] [ 0.243804] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved [ 0.243808] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.243854] pnp 00:02: [dma 4] [ 0.243857] pnp 00:02: [io 0x0000-0x000f] [ 0.243859] pnp 00:02: [io 0x0081-0x0083] [ 0.243862] pnp 00:02: [io 0x0087] [ 0.243864] pnp 00:02: [io 0x0089-0x008b] [ 0.243866] pnp 00:02: [io 0x008f] [ 0.243868] pnp 00:02: [io 0x00c0-0x00df] [ 0.243907] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.243925] pnp 00:03: [io 0x0070-0x0071] [ 0.243925] pnp 00:03: [irq 8] [ 0.243926] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.243940] pnp 00:04: [io 0x0061] [ 0.243981] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.243995] pnp 00:05: [io 0x00f0-0x00ff] [ 0.244011] pnp 00:05: [irq 13] [ 0.244051] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.244553] pnp 00:06: [io 0x03f8-0x03ff] [ 0.244559] pnp 00:06: [irq 4] [ 0.244562] pnp 00:06: [dma 0 disabled] [ 0.244648] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.245543] pnp 00:07: [io 0x0378-0x037f] [ 0.245550] pnp 00:07: [irq 7] [ 0.245552] pnp 00:07: [dma 0 disabled] [ 0.245800] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.246022] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.246025] pnp 00:08: [io 0x0a00-0x0adf] [ 0.246027] pnp 00:08: [io 0x0ae0-0x0aef] [ 0.246098] system 00:08: [io 0x0a00-0x0adf] has been reserved [ 0.246102] system 00:08: [io 0x0ae0-0x0aef] has been reserved [ 0.246105] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.246282] pnp 00:09: [io 0x0010-0x001f] [ 0.246285] pnp 00:09: [io 0x0022-0x003f] [ 0.246287] pnp 00:09: [io 0x0044-0x005f] [ 0.246289] pnp 00:09: [io 0x0062-0x0063] [ 0.246292] pnp 00:09: [io 0x0065-0x006f] [ 0.246294] pnp 00:09: [io 0x0072-0x007f] [ 0.246296] pnp 00:09: [io 0x0080] [ 0.246298] pnp 00:09: [io 0x0084-0x0086] [ 0.246301] pnp 00:09: [io 0x0088] [ 0.246304] pnp 00:09: [io 0x008c-0x008e] [ 0.246306] pnp 00:09: [io 0x0090-0x009f] [ 0.246308] pnp 00:09: [io 0x00a2-0x00bf] [ 0.246310] pnp 00:09: [io 0x00e0-0x00ef] [ 0.246313] pnp 00:09: [io 0x04d0-0x04d1] [ 0.246315] pnp 00:09: [io 0x0800-0x087f] [ 0.246317] pnp 00:09: [io 0x0400-0x041f] [ 0.246320] pnp 00:09: [io 0x0480-0x04bf] [ 0.246322] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.246325] pnp 00:09: [mem 0xfed20000-0xfed8ffff] [ 0.246327] pnp 00:09: [mem 0xffb80000-0xfffffffe] [ 0.246413] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.246417] system 00:09: [io 0x0800-0x087f] could not be reserved [ 0.246421] system 00:09: [io 0x0400-0x041f] has been reserved [ 0.246424] system 00:09: [io 0x0480-0x04bf] has been reserved [ 0.246429] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.246432] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.246436] system 00:09: [mem 0xffb80000-0xfffffffe] could not be reserved [ 0.246440] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.246571] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.246574] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.246647] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.246650] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.246654] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.246709] pnp 00:0b: [mem 0xf0000000-0xf3ffffff] [ 0.246778] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.246782] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.247086] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.247089] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.247091] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.247094] pnp 00:0c: [mem 0x00100000-0x7f7fffff] [ 0.247096] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.247187] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.247191] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.247195] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.247199] system 00:0c: [mem 0x00100000-0x7f7fffff] could not be reserved [ 0.247203] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.247434] pnp: PnP ACPI: found 13 devices [ 0.247436] ACPI: ACPI bus type pnp unregistered [ 0.247439] PnPBIOS: Disabled by ACPI PNP [ 0.285250] PCI: max bus depth: 1 pci_try_num: 2 [ 0.285290] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.285295] pci 0000:00:1c.3: BAR 13: assigned [io 0x1000-0x1fff] [ 0.285299] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.285303] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80400000-0x805fffff] [ 0.285307] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref] [ 0.285311] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.285316] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.285319] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.285325] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff] [ 0.285330] pci 0000:00:1c.0: bridge window [mem 0x80600000-0x807fffff 64bit pref] [ 0.285336] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.285339] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.285345] pci 0000:00:1c.1: bridge window [mem 0xcfa00000-0xcfafffff] [ 0.285349] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.285356] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.285360] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.285365] pci 0000:00:1c.3: bridge window [mem 0xcfb00000-0xcfcfffff] [ 0.285369] pci 0000:00:1c.3: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.285376] pci 0000:00:1e.0: PCI bridge to [bus 04-04] [ 0.285379] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.285394] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.285410] pci 0000:00:1c.0: setting latency timer to 64 [ 0.285424] pci 0000:00:1c.1: setting latency timer to 64 [ 0.285430] pci 0000:00:1c.3: enabling device (0106 -> 0107) [ 0.285441] pci 0000:00:1c.3: setting latency timer to 64 [ 0.285448] pci 0000:00:1e.0: setting latency timer to 64 [ 0.285452] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.285455] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.285458] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.285460] pci_bus 0000:01: resource 1 [mem 0x80400000-0x805fffff] [ 0.285463] pci_bus 0000:01: resource 2 [mem 0x80600000-0x807fffff 64bit pref] [ 0.285466] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.285468] pci_bus 0000:02: resource 1 [mem 0xcfa00000-0xcfafffff] [ 0.285471] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.285473] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.285476] pci_bus 0000:03: resource 1 [mem 0xcfb00000-0xcfcfffff] [ 0.285478] pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.285481] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.285484] pci_bus 0000:04: resource 4 [io 0x0000-0xffff] [ 0.285486] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff] [ 0.285550] NET: Registered protocol family 2 [ 0.287540] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.287935] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.288485] TCP bind hash table entries: 65536 (order: 8, 1835008 bytes) [ 0.289507] TCP: Hash tables configured (established 131072 bind 65536) [ 0.289510] TCP reno registered [ 0.289514] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.289537] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.289731] NET: Registered protocol family 1 [ 0.289758] pci 0000:00:02.0: Boot video device [ 0.289957] PCI: CLS 32 bytes, default 64 [ 0.290051] Unpacking initramfs... [ 0.608303] Freeing initrd memory: 13408k freed [ 0.615753] audit: initializing netlink socket (disabled) [ 0.615775] type=2000 audit(1506368959.608:1): initialized [ 0.632031] highmem bounce pool size: 64 pages [ 0.632038] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.632227] VFS: Disk quotas dquot_6.5.2 [ 0.632278] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.632380] msgmni has been set to 1730 [ 0.632610] alg: No test for stdrng (krng) [ 0.632646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.632650] io scheduler noop registered [ 0.632652] io scheduler deadline registered [ 0.632670] io scheduler cfq registered (default) [ 0.632810] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.632858] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.632937] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.632976] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.633051] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.633089] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.633210] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.633244] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.633246] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.633657] intel_idle: does not run on family 6 model 15 [ 0.633693] ERST: Table is not found! [ 0.633695] GHES: HEST is not enabled! [ 0.633714] isapnp: Scanning for PnP cards... [ 0.986822] isapnp: No Plug & Play device found [ 0.986912] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.007266] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.168627] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.204349] Linux agpgart interface v0.103 [ 1.204520] agpgart-intel 0000:00:00.0: Intel 945G Chipset [ 1.204581] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 1.205029] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.205185] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.205392] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.207909] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.207966] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.208138] mousedev: PS/2 mouse device common for all mice [ 1.208203] rtc_cmos 00:03: RTC can wake from S4 [ 1.208330] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.208381] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.208398] cpuidle: using governor ladder [ 1.208401] cpuidle: using governor menu [ 1.208782] TCP cubic registered [ 1.208832] NET: Registered protocol family 10 [ 1.209734] Mobile IPv6 [ 1.209738] NET: Registered protocol family 17 [ 1.209743] Registering the dns_resolver key type [ 1.209771] Using IPI No-Shortcut mode [ 1.209917] PM: Hibernation image not present or could not be loaded. [ 1.209937] registered taskstats version 1 [ 1.210316] rtc_cmos 00:03: setting system clock to 2017-09-25 19:49:20 UTC (1506368960) [ 1.210364] Initializing network drop monitor service [ 1.210514] Freeing unused kernel memory: 728k freed [ 1.210790] Write protecting the kernel text: 2868k [ 1.210844] Write protecting the kernel read-only data: 1076k [ 1.210846] NX-protecting the kernel data: 3276k [ 1.224184] udevd[63]: starting version 175 [ 1.270381] usbcore: registered new interface driver usbfs [ 1.271667] usbcore: registered new interface driver hub [ 1.272525] usbcore: registered new device driver usb [ 1.277861] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.277926] r8169 0000:02:00.0: setting latency timer to 64 [ 1.278006] r8169 0000:02:00.0: irq 43 for MSI/MSI-X [ 1.279909] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.280255] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.280260] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.280328] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.280352] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.280363] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.286461] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.286552] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xcfe3bc00 [ 1.291662] SCSI subsystem initialized [ 1.292697] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf821a000, 00:1d:92:3f:09:fa, XID 18000000 IRQ 43 [ 1.292701] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.300097] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.300593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.300596] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.300599] usb usb1: Product: EHCI Host Controller [ 1.300601] usb usb1: Manufacturer: Linux 3.2.0-4-rt-686-pae ehci_hcd [ 1.300604] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.305349] uhci_hcd: USB Universal Host Controller Interface driver [ 1.308186] libata version 3.00 loaded. [ 1.316492] hub 1-0:1.0: USB hub found [ 1.316505] hub 1-0:1.0: 8 ports detected [ 1.321950] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.321956] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.322166] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.322368] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880 [ 1.322422] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.322425] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.322427] usb usb2: Product: UHCI Host Controller [ 1.322430] usb usb2: Manufacturer: Linux 3.2.0-4-rt-686-pae uhci_hcd [ 1.322432] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.326341] hub 2-0:1.0: USB hub found [ 1.326354] hub 2-0:1.0: 2 ports detected [ 1.328368] ata_piix 0000:00:1f.1: version 2.13 [ 1.328437] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.345734] scsi0 : ata_piix [ 1.347143] scsi1 : ata_piix [ 1.351540] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.351544] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.351821] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.351828] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.351945] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.352049] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 1.352102] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.352105] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.352108] usb usb3: Product: UHCI Host Controller [ 1.352110] usb usb3: Manufacturer: Linux 3.2.0-4-rt-686-pae uhci_hcd [ 1.352112] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.355248] hub 3-0:1.0: USB hub found [ 1.355258] hub 3-0:1.0: 2 ports detected [ 1.357345] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.357398] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.368312] scsi2 : ata_piix [ 1.369888] scsi3 : ata_piix [ 1.374601] ata3: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19 [ 1.374605] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19 [ 1.374837] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.374842] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.374944] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.375034] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480 [ 1.375087] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.375090] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.375092] usb usb4: Product: UHCI Host Controller [ 1.375094] usb usb4: Manufacturer: Linux 3.2.0-4-rt-686-pae uhci_hcd [ 1.375096] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.378325] hub 4-0:1.0: USB hub found [ 1.378333] hub 4-0:1.0: 2 ports detected [ 1.379949] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.379953] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.379993] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.380101] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 1.380147] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.380150] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380153] usb usb5: Product: UHCI Host Controller [ 1.380155] usb usb5: Manufacturer: Linux 3.2.0-4-rt-686-pae uhci_hcd [ 1.380157] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.383166] hub 5-0:1.0: USB hub found [ 1.383174] hub 5-0:1.0: 2 ports detected [ 1.539279] ata4.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 [ 1.539287] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.552380] ata4.00: configured for UDMA/133 [ 1.552616] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 1.566989] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.567065] sd 3:0:0:0: [sda] Write Protect is off [ 1.567069] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.567101] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.612050] Refined TSC clocksource calibration: 2393.999 MHz. [ 1.612060] Switching to clocksource tsc [ 1.631753] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 1.632452] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.634573] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.868108] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.036170] usb 5-1: New USB device found, idVendor=045e, idProduct=0800 [ 2.036177] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.036182] usb 5-1: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 [ 2.036186] usb 5-1: Manufacturer: Microsoft [ 2.047466] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input0 [ 2.047553] generic-usb 0003:045E:0800.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.3-1/input0 [ 2.053780] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input1 [ 2.054024] generic-usb 0003:045E:0800.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.3-1/input1 [ 2.078473] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.2/input/input2 [ 2.078623] generic-usb 0003:045E:0800.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.3-1/input2 [ 2.078652] usbcore: registered new interface driver usbhid [ 2.078654] usbhid: USB HID core driver [ 7.375626] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0x0 [ 7.378752] platform microcode: firmware: agent loaded intel-ucode/06-0f-0d into memory [ 7.378943] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02 [ 7.378956] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0x0 [ 7.381646] platform microcode: firmware: agent loaded intel-ucode/06-0f-0d into memory [ 7.381839] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02 [ 7.381961] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 7.518711] PM: Starting manual resume from disk [ 7.518716] PM: Hibernation image partition 8:7 present [ 7.518718] PM: Looking for hibernation image. [ 7.518952] PM: Image not found (code -22) [ 7.518958] PM: Hibernation image not present or could not be loaded. [ 7.575326] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 9.329144] udevd[370]: starting version 175 [ 9.947067] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 9.947075] ACPI: Power Button [PWRB] [ 9.947154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 9.947158] ACPI: Power Button [PWRF] [ 10.120177] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 10.133815] coretemp coretemp.0: Using relative temperature scale! [ 10.133899] coretemp coretemp.0: Using relative temperature scale! [ 10.200324] ACPI: Requesting acpi_cpufreq [ 10.343955] [drm] Initialized drm 1.1.0 20060810 [ 10.351838] parport_pc 00:07: reported by Plug and Play ACPI [ 10.351883] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.367513] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SM00 [io 0x400-0x406] [ 10.367516] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.376819] intel_rng: FWH not detected [ 10.470937] i915 0000:00:02.0: setting latency timer to 64 [ 10.493662] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.493665] [drm] Driver supports precise vblank timestamp query. [ 10.494062] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.504870] iTCO_vendor_support: vendor-support=0 [ 10.505704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 10.505812] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 10.507145] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.516530] [drm] initialized overlay support [ 10.532891] leds_ss4200: no LED devices found [ 10.558233] fbcon: inteldrmfb (fb0) is primary device [ 10.584230] cfg80211: Calling CRDA to update world regulatory domain [ 10.605601] Console: switching to colour frame buffer device 180x56 [ 10.610528] fb0: inteldrmfb frame buffer device [ 10.610530] drm: registered panic notifier [ 10.610539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.610669] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 10.611002] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 10.954723] ath9k 0000:03:00.0: setting latency timer to 64 [ 10.962590] ath: EEPROM regdomain: 0x21 [ 10.962601] ath: EEPROM indicates we should expect a direct regpair map [ 10.962612] ath: Country alpha2 being used: AU [ 10.962615] ath: Regpair used: 0x21 [ 11.290143] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.291630] Registered led device: ath9k-phy0 [ 11.291638] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8d80000, irq=19 [ 11.563304] cfg80211: World regulatory domain updated: [ 11.563308] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.563311] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 11.563314] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 11.563317] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 11.563320] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 11.563322] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 11.563325] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 11.563327] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 11.563330] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 11.563391] cfg80211: Calling CRDA for country: AU [ 11.625703] cfg80211: Regulatory domain changed to country: AU [ 11.625706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.625710] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 11.625713] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm) [ 11.625716] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm) [ 11.625718] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2400 mBm) [ 11.625721] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 13.174027] Adding 2027516k swap on /dev/sda7. Priority:-1 extents:1 across:2027516k [ 13.201560] EXT4-fs (sda6): re-mounted. Opts: (null) [ 13.417754] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 13.561964] loop: module loaded [ 15.110638] RPC: Registered named UNIX socket transport module. [ 15.110641] RPC: Registered udp transport module. [ 15.110644] RPC: Registered tcp transport module. [ 15.110647] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.156789] FS-Cache: Loaded [ 15.199210] FS-Cache: Netfs 'nfs' registered for caching [ 15.218215] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.349498] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6 [ 18.386167] Bluetooth: Core ver 2.16 [ 18.386200] NET: Registered protocol family 31 [ 18.386204] Bluetooth: HCI device and connection manager initialized [ 18.386209] Bluetooth: HCI socket layer initialized [ 18.386212] Bluetooth: L2CAP socket layer initialized [ 18.386227] Bluetooth: SCO socket layer initialized [ 18.420965] Bluetooth: RFCOMM TTY layer initialized [ 18.420973] Bluetooth: RFCOMM socket layer initialized [ 18.420975] Bluetooth: RFCOMM ver 1.11 [ 18.630509] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.630513] Bluetooth: BNEP filters: protocol multicast [ 19.206822] lp0: using parport0 (interrupt-driven). [ 19.640695] ppdev: user-space parallel port driver [ 20.750833] r8169 0000:02:00.0: eth0: link down [ 20.751046] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.788386] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 47.256017] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 266, at 266], missed IRQ? [ 50.016028] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 331, at 331], missed IRQ? [ 73.357896] r8169 0000:02:00.0: eth0: link up [ 73.358159] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 83.968021] eth0: no IPv6 routers present [ 91.277257] ip_tables: (C) 2000-2006 Netfilter Core Team [ 95.592021] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 3074, at 3074], missed IRQ? [ 97.712020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 3112, at 3112], missed IRQ? [ 140.130543] r8169 0000:02:00.0: eth0: link down [ 207.676161] r8169 0000:02:00.0: eth0: link up [ 207.676419] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 216.144021] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 21905, at 21905], missed IRQ? [ 218.180020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 21983, at 21983], missed IRQ? [ 282.768021] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 136324, at 136324], missed IRQ? [ 590.560665] wlan0: authenticate with 6a:bf:6b:4b:fc:01 (try 1) [ 590.562628] wlan0: authenticated [ 590.562984] wlan0: associate with 6a:bf:6b:4b:fc:01 (try 1) [ 590.566984] wlan0: RX AssocResp from 6a:bf:6b:4b:fc:01 (capab=0x411 status=0 aid=2) [ 590.566992] wlan0: associated [ 590.571658] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 601.408022] wlan0: no IPv6 routers present [ 634.794149] r8169 0000:02:00.0: eth0: link down [ 642.280019] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 433049, at 433049], missed IRQ? [ 1366.988019] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 462590, at 462590], missed IRQ? [ 1561.012020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 467330, at 467330], missed IRQ? [ 1595.356020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 469919, at 469919], missed IRQ? [ 1659.344019] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 478976, at 478976], missed IRQ? [ 1695.020023] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 482994, at 482994], missed IRQ? [ 1812.182561] r8169 0000:02:00.0: eth0: link up [ 1820.540021] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 486241, at 486241], missed IRQ? [ 1822.392020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 486325, at 486325], missed IRQ? [ 2413.672023] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 654399, at 654399], missed IRQ? [ 2873.912041] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 746438, at 746438], missed IRQ? [ 2946.528023] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 765034, at 765034], missed IRQ? [ 2948.680019] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 765128, at 765128], missed IRQ? [ 2951.204020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 765281, at 765281], missed IRQ? [ 3186.030602] r8169 0000:02:00.0: eth0: link down [ 3205.618622] r8169 0000:02:00.0: eth0: link up [ 3347.188020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 777547, at 777547], missed IRQ? [ 3513.908020] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 780377, at 780377], missed IRQ?