LINUXCNC - 2.8.4 Machine configuration directory is '/home/manusha/in/linuxcnc/configs/manusha-cnc' Machine configuration file is 'manusha-cnc.ini' Starting LinuxCNC... . Found file(REL): ./manusha-cnc.hal Found file(REL): ./custom.hal Found file(LIB): /usr/share/linuxcnc/hallib/xhc-hb04.tcl xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: using std_start_pause_button APP: xhc-hb04-accels found: APP: monitor-xhc-hb04 found: #------------------------------------------------------------ This obsolete script: xhc-hb04-accels should be removed from LinuxCNC ini files (effective 2.8~pre) xhc-hb04.tcl now controls reduced wheel jogging accels using the hal pins: axis.L.jog-accel-fraction joint.N.jog-accel-fraction #------------------------------------------------------------ RTAPI: ERROR: Unexpected realtime delay on task 1 This Message will only display once per session. Run the Latency Test and resolve before continuing. note: MAXV max: 100.000 units/sec 6000.000 units/min note: LJOG max: 100.000 units/sec 6000.000 units/min note: LJOG default: 10.000 units/sec 600.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) Waiting for component 'gladevcp' to become ready.......................................................................................... **** probe_screen GETINIINFO **** Preference file path: /home/manusha/in/linuxcnc/configs/manusha-cnc/manusha-cnc.pref **** PROBE SCREEN INFO **** **** To many increments given in INI File for this screen **** **** Only the first 5 will be reachable through this screen **** Xlib.protocol.request.QueryExtension Xlib.protocol.request.QueryExtension 4194307 toolnumber = 0 False Traceback (most recent call last): File "/usr/lib/pymodules/python2.7/gladevcp/xembed.py", line 103, in forward g = fw.get_geometry() File "/usr/lib/pymodules/python2.7/Xlib/xobject/drawable.py", line 38, in get_geometry drawable = self) File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1428, in __init__ self.reply() File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1448, in reply raise self._error Xlib.error.BadDrawable: : code = 9, resource_id = Xlib.xobject.resource.Resource(0x00280005), sequence_number = 9, major_opcode = 14, minor_opcode = 0 Shutting down and cleaning up LinuxCNC... Traceback (most recent call last): File "/usr/lib/pymodules/python2.7/gladevcp/xembed.py", line 103, in forward g = fw.get_geometry() File "/usr/lib/pymodules/python2.7/Xlib/xobject/drawable.py", line 38, in get_geometry drawable = self) File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1428, in __init__ self.reply() File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1448, in reply raise self._error Xlib.error.BadDrawable: : code = 9, resource_id = Xlib.xobject.resource.Resource(0x00280005), sequence_number = 10, major_opcode = 14, minor_opcode = 0 Traceback (most recent call last): File "/usr/lib/pymodules/python2.7/gladevcp/xembed.py", line 103, in forward g = fw.get_geometry() File "/usr/lib/pymodules/python2.7/Xlib/xobject/drawable.py", line 38, in get_geometry drawable = self) File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1428, in __init__ self.reply() File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1448, in reply raise self._error Xlib.error.BadDrawable: : code = 9, resource_id = Xlib.xobject.resource.Resource(0x00280005), sequence_number = 11, major_opcode = 14, minor_opcode = 0 Traceback (most recent call last): File "/usr/lib/pymodules/python2.7/gladevcp/xembed.py", line 103, in forward g = fw.get_geometry() File "/usr/lib/pymodules/python2.7/Xlib/xobject/drawable.py", line 38, in get_geometry drawable = self) File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1428, in __init__ self.reply() File "/usr/lib/pymodules/python2.7/Xlib/protocol/rq.py", line 1448, in reply raise self._error Xlib.error.BadDrawable: : code = 9, resource_id = Xlib.xobject.resource.Resource(0x00280005), sequence_number = 12, major_opcode = 14, minor_opcode = 0 task: 11534 cycles, min=0.001134, max=0.067539, avg=0.013036, 0 latency excursions (> 10x expected cycle time of 0.010000s) xhc-hb04: waiting for XHC-HB04 device xhc-hb04: found XHC-HB04 device xhc-hb04: connection lost, cleaning up