LINUXCNC - 2.9.0-58-gc717fdbd43
Machine configuration directory is '/home/james/linuxcnc/configs/sim.axis-3'
Machine configuration file is 'axis_mm.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal
Found file(lib): /usr/share/linuxcnc/hallib/sim_spindle_encoder.hal
Found file(lib): /usr/share/linuxcnc/hallib/axis_manualtoolchange.hal
Found file(lib): /usr/share/linuxcnc/hallib/simulated_home.hal
Found file(REL): ./cooling.hal
task: main loop took 0.011532 seconds
task: main loop took 0.031200 seconds
task: main loop took 0.022247 seconds
task: main loop took 0.018494 seconds
task: main loop took 0.023256 seconds
task: main loop took 0.021081 seconds
task: main loop took 0.018905 seconds
task: main loop took 0.023946 seconds
task: main loop took 0.011735 seconds
Shutting down and cleaning up LinuxCNC...
task: 31200 cycles, min=0.000005, max=0.031200, avg=0.001079, 9 latency excursions (> 10x expected cycle time of 0.001000s)