Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.2-11-g6a3d0a434 Machine configuration directory is '/home/aaron/linuxcnc/configs/PNCCONF-Probe Basic' Machine configuration file is 'PNCCONF.ini' INIFILE=/home/aaron/linuxcnc/configs/PNCCONF-Probe Basic/PNCCONF.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=probe_basic COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./PNCCONF.hal Found file(REL): ./7i84.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: probe_basic Clear and load history to list Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 1319 cycles, min=0.000143, max=0.032809, avg=0.010027, 0 latency excursions (> 10x expected cycle time of 0.010000s) File: tool.tbl Unrecognized line skipped: ;Tool Pocket Z Offset Diameter Remark hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:02:00.0 hm2/hm2_5i25.0: Low Level init 0.15 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 Board hm2_5i25.0.7i77.0.0 Hardware Mode 0 = standard Board hm2_5i25.0.7i77.0.0 Software Mode 0 = input_output Board hm2_5i25.0.7i77.0.0 Software Mode 1 = io_analog Board hm2_5i25.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage Board hm2_5i25.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage Board hm2_5i25.0.7i77.0.1 Hardware Mode 0 = standard Board hm2_5i25.0.7i77.0.1 Software Mode 0 = analogout_enables Board hm2_5i25.0.7i84.0.2 Hardware Mode 0 = standard Board hm2_5i25.0.7i84.0.2 Software Mode 0 = input_output Board hm2_5i25.0.7i84.0.2 Software Mode 1 = io_analog_fieldvoltage Board hm2_5i25.0.7i84.0.2 Software Mode 2 = io_encoder_analog hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): Smart Serial Interface #0, pin txen2 (Output) hm2/hm2_5i25.0: IO Pin 001 (P3-14): Smart Serial Interface #0, pin tx2 (Output) hm2/hm2_5i25.0: IO Pin 002 (P3-02): Smart Serial Interface #0, pin rx2 (Input) hm2/hm2_5i25.0: IO Pin 003 (P3-15): Smart Serial Interface #0, pin tx1 (Output) hm2/hm2_5i25.0: IO Pin 004 (P3-03): Smart Serial Interface #0, pin rx1 (Input) hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 014 (P3-11): IOPort hm2/hm2_5i25.0: IO Pin 015 (P3-12): IOPort hm2/hm2_5i25.0: IO Pin 016 (P3-13): IOPort hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: /usr/bin/linuxcnc: line 290: cd: $'/home/aaron/linuxcnc/configs\nBasic': No such file or directory Can not find -sec DISPLAY -var INTRO_GRAPHIC -num 1 Note: Using POSIX realtime [qtpyvcp][INFO] Logging to /home/aaron/qtpyvcp.log (logger.py:97) [qtpyvcp][INFO] QtPyVCP Version: v0.3.19+15.g3ad0cc9c (opt_parser.py:199) [qtpyvcp.utilities.info][INFO] The machine has 3 axes and 3 joints (info.py:379) [qtpyvcp.utilities.info][INFO] The Axis/Joint mapping is: (info.py:380) [qtpyvcp.utilities.info][INFO] Axis X --> Joint 0 (info.py:388) [qtpyvcp.utilities.info][INFO] Axis Y --> Joint 1 (info.py:388) [qtpyvcp.utilities.info][INFO] Axis Z --> Joint 2 (info.py:388) [qtpyvcp.utilities.info][WARNING] No [TRAJ] SPINDLES entry in INI, using 1 (info.py:127) [qtpyvcp.utilities.info][WARNING] No [DISPLAY] DEFAULT_SPINDLE_SPEED entry found in INI, using 300rpm (info.py:213) [qtpyvcp][INFO] Loading global stylesheet: /home/aaron/.local/lib/python2.7/site-packages/probe_basic/probe_basic.qss (application.py:186) [qtpyvcp.app.launcher][INFO] Loading POSTGUI_HALFILE: /home/aaron/linuxcnc/configs/PNCCONF-Probe Basic/postgui_call_list.hal (launcher.py:96) custom_postgui.hal:5: Pin 'qtpyvcp.speed-override.reset' does not exist Failed to load POSTGUI_HALFILE with error: 1 2306 2354 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7f7d2efad000 Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Wed 13 Jul 2022 07:02:03 PM MDT UTC Date: Thu 14 Jul 2022 01:02:03 AM UTC this program: /usr/bin/linuxcnc_info uptime: 19:02:03 up 18 min, 1 user, load average: 0.96, 1.26, 0.90 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster which linuxcnc: /usr/bin/linuxcnc pwd: /home/aaron/linuxcnc/configs/PNCCONF-Probe Basic USER: aaron LOGNAME: aaron HOME: /home/aaron EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/aaron/linuxcnc/configs/PNCCONF-Probe Basic/bin:/usr/bin:/home/aaron/.local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: linuxcnc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.235-1 (2022-03-17) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-20-rt-amd64 root=UUID=bfd03bb9-3223-4853-89d4-3998a5679683 ro initrd=/install/gtk/initrd.gz quiet isolcpus=2,3 model name: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz cores: 4 cpu MHz: 1999.198 parport: serial: Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 2.7.16 git: git version 2.20.1 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.2-11-g6a3d0a434 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-=====================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.8.2.11.g6a3d0a434 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.8.2.11.g6a3d0a434 all controlador de movimiento para máquinas CNC y robots (Español). ii linuxcnc-doc-fr 1:2.8.2.11.g6a3d0a434 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.8.2.11.g6a3d0a434 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.2.11.g6a3d0a434 amd64 PC based motion controller for real-time Linux