vm1@vm1-VirtualBox:~$ locate ncam
/home/vm1/linuxcnc/configs/sim.axis/ncam
/home/vm1/linuxcnc/configs/sim.axis/ncam_debsetup.txt
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git
/home/vm1/linuxcnc/configs/sim.axis/ncam/.gitignore
/home/vm1/linuxcnc/configs/sim.axis/ncam/LICENSE
/home/vm1/linuxcnc/configs/sim.axis/ncam/README.md
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian
/home/vm1/linuxcnc/configs/sim.axis/ncam/defaults
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale
/home/vm1/linuxcnc/configs/sim.axis/ncam/man
/home/vm1/linuxcnc/configs/sim.axis/ncam/my-stuff
/home/vm1/linuxcnc/configs/sim.axis/ncam/ncam.glade
/home/vm1/linuxcnc/configs/sim.axis/ncam/ncam.py
/home/vm1/linuxcnc/configs/sim.axis/ncam/ncam.ui
/home/vm1/linuxcnc/configs/sim.axis/ncam/ncam_pref.glade
/home/vm1/linuxcnc/configs/sim.axis/ncam/pref_edit.py
/home/vm1/linuxcnc/configs/sim.axis/ncam/pref_edit.pyc
/home/vm1/linuxcnc/configs/sim.axis/ncam/restore_lcnc.py
/home/vm1/linuxcnc/configs/sim.axis/ncam/ttt
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/HEAD
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/branches
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/config
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/description
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/index
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/info
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/objects
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/packed-refs
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/refs
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/applypatch-msg.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/commit-msg.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/fsmonitor-watchman.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/post-update.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/pre-applypatch.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/pre-commit.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/pre-push.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/pre-rebase.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/pre-receive.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/prepare-commit-msg.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/hooks/update.sample
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/info/exclude
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs/HEAD
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs/refs
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs/refs/heads
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs/refs/remotes
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs/refs/heads/master
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs/refs/remotes/origin
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/logs/refs/remotes/origin/HEAD
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/objects/info
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/objects/pack
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/objects/pack/pack-edb044c61af6650a71c8fec9f0e742d4df8f9fa4.idx
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/objects/pack/pack-edb044c61af6650a71c8fec9f0e742d4df8f9fa4.pack
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/refs/heads
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/refs/remotes
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/refs/tags
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/refs/heads/master
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/refs/remotes/origin
/home/vm1/linuxcnc/configs/sim.axis/ncam/.git/refs/remotes/origin/HEAD
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/customize
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/lathe
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/mill
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/plasma
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/translating
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/lathe/menu.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/lathe/projects
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/lathe/projects/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/mill/menu.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/mill/projects
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/mill/projects/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/plasma/_menu-custom.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/plasma/menu.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/plasma/projects
/home/vm1/linuxcnc/configs/sim.axis/ncam/catalogs/plasma/projects/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/circular-array.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/comment.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/gcode.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/group-off.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/group.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/i_gcode.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/proj_desc.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/rectangular-array.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/boring.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/facing.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/init-turning.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/material.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/parting.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/radius_od.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/taper_ida.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/taper_idl.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/taper_oda.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/taper_odl.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/threading.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/tool-change.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/lathe/turning.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/SHCS.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/SHCS_slot-arc.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/SHCS_slot.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/SHCS_slot2.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/circle-2.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/circle-k.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/circle.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/diamond.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/drill-array.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/drill-circle-irr.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/drill-circle.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/drill-single.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/ellipse.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/index-axisA.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/material.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polygon.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-arc-ij.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-arc-m.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-arc-polar.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-arc-to.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-arc-top.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-mirror-i.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-mirror-p.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-polar.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-repeat.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline-to.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/polyline.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/probe-array.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/probe-edge.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/probe-hole.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/probe-stock.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/probe-surface.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/rectangle.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/sel-drill.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/sel-end-mill.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/sel-reamer.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/sel-thread-mill.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/slot-2.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/slot-arc.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/slot.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/surf_finish.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/taper-hole.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/thread-milling.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/mill/ttt.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/circle-2.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/circle.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/cutting-params2d.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/cutting-params3d.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/ellipse.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/material2d.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/material3d.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polygon.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-arc-ij.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-arc-m.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-arc-polar.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-arc-to.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-arc-top.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-mirror-i.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-mirror-p.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-polar.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-repeat.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline-to.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/polyline.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/rectangle.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/slot-2.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/slot-arc.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/cfg/plasma/slot.cfg
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common/lathe.tbl
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common/lathe_mm.tbl
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common/mill.tbl
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common/mill_mm.tbl
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common/ncam.ui
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common/plasma.tbl
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/common/plasma_mm.tbl
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/lathe-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/lathe.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/linuxcnc.var
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/linuxcnc.var.bak
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/mill-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/mill.var
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/mill.var.bak
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/millO.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/plasma-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo/plasma.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8/lathe-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8/lathe.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8/mill-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8/mill.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8/plasma-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/axis/ncam_demo.2.8/plasma.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo/lathe-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo/lathe.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo/mill-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo/mill.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo/plasma-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo/plasma.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8/lathe-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8/lathe.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8/mill-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8/mill.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8/plasma-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gmoccapy/ncam_demo.2.8/plasma.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo/lathe-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo/lathe.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo/mill-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo/mill.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo/plasma-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo/plasma.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8/README
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8/lathe-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8/lathe.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8/mill-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8/mill.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8/plasma-mm.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/configs/sim/gscreen/ncam_demo.2.8/plasma.ini
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/changelog
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/compat
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/control
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/copyright
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/makedeb.sh
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/rules
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/source
/home/vm1/linuxcnc/configs/sim.axis/ncam/debian/source/format
/home/vm1/linuxcnc/configs/sim.axis/ncam/defaults/lathe
/home/vm1/linuxcnc/configs/sim.axis/ncam/defaults/mill
/home/vm1/linuxcnc/configs/sim.axis/ncam/defaults/plasma
/home/vm1/linuxcnc/configs/sim.axis/ncam/defaults/lathe/default_template.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/defaults/mill/default_template.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/defaults/plasma/default_template.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/plasma
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/4th-axis.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/Lathe cnc conversion
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/Polyline
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/TTFengraving.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/basic spacer.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/fuel sender flange.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/fuel sender pattern.pdf
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/surface finishing.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/turner-cube.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/turner-cube2.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/wheel demo.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/Lathe cnc conversion/sensors bracket.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/Lathe cnc conversion/spindle wheel.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/mill/Polyline/miror.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/plasma/demo.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/examples/plasma/demo2.xml
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/00.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/advanced.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/align-x.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/align-y.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/align-z.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/angle-vert.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/angle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-bisector.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-center.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-cw-ccw.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-end-opt.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-in-out.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-polar-ctr.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-polar.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-tangent.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-to-coords.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-to-ij.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-to-xyij.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc-to-xyr.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/arc.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/array.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/axis-a.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/basic.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/center-drill.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/center-rect.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/center.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/change-dir.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/check.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circ-arr-opt1.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circ-array-diam.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circ-array-edge.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circ-array-opt.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circle-2.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circle-k.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circle-kh.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circle-kw.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circle-rad-dia.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/circular-array.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/cl-align.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/close.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/cnc-ru.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/column.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/comment.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/comp-l.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/complement.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/copies-holes.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/copies.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/corner-radius.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/corner-style.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/counterbore.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/cutter-teeth.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/cutting-params.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/cw-ccw.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/d-flat.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/dbl-check.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/delta.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/depth.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/diameter.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/dir.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drawing.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-array.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-change.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-circle-irregular.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-circle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-dwell.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-end.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-in-center.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-irr-circle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-mode.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-point.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-retract.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-single.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill-start.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drill.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/drills.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/dsub.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/dx.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/dy.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/dz.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/e-diam.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ellipse-points.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ellipse-rad-x.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ellipse-rad-y.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ellipse.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/enable.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ext-angle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/feed-fact.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/feed.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/file-gcode.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/file-probe.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/finish.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/g-small.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/g41.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/g42.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/g4x.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/g90.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/g91.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/gcode.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/glasses.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/goto.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/goto1.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/group-offset.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/group.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/height.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/helix-count.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/hexagon-rad.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/hexagon.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/i-diam.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/i.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/id.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/info.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/inner-radius.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/items.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ix-clear.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/j.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/k.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/l-stock.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-chuck.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-cutting-params.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-depth-step.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-dir.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-facing.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-feed.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-multipass.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-rappid-id.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-rappid-x.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-rappid-z.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-rappid.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-spindle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-surface-id.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-surface.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-tool-change.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lathe-tool.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lead-in-thread.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lead-in.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lead-out.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/len-opt-x.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/len-opt-y.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-abs.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-al.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-arc-in.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-len.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-length.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-polar.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-rel.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/line-to.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/linuxcncicon.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lx-clear.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/lz-clear.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/mill-tool-d.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/mill-tool.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/misc.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/mm-in.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/mm2in.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/motor-mount.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/n-gon.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/no-icon.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/num.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/od-advanced.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/od.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/oval-d.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/oval-w.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/oval.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/parting.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/pen-mode.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/poly-repeat-items.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/polyline-mirror-items.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/polyline-mirrored.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/polyline.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/post-amble.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/pre-amble.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/prj-desc.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-down.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-edge.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-feed.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-flat-in.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-flat-out.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-grid.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-hole.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-in-out.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-stock.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-tool-d.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe-tool-l.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/probe.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/property.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/r.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rad-arc-opt.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/radial-slot.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/radius.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ramp-down-rate.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rapid.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rappid.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rect-array.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rect-corner.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rect-pocket.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rect.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/ref-slot-ctr.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/rotate-items.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/row.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/safe-z-rel.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/safe-z.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/screw-driver-key.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/sel+-.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/sft-margin.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/shcs-arc.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/shcs-hole.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/shcs-slot.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/shcs-slot2.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/shcs.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/simp.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/skip_block.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/slot-2.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/slot.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/small-diam.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/snowflake.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/source
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/spindle-sf.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/spindle-start.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/square.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/stock.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/sub.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/surface.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/swap-side.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-advanced.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-id.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-ida.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-idl.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-idla.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-oda.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-odl.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-odla.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-x-ld.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-x-sd.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-z-ld.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper-z-sd.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taper.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taperi-x-ld.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taperi-x-sd.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taperi-z-ld.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/taperi-z-sd.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-d.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-depth.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-eng.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-id.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-in-out.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-pitch-v.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-pitch.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-pitch2.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-step.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread-v-d.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/thread_depth2.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/threading-params.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/threading-v.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/threading.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/through.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/time-out.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/timer.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-01.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-change.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-d.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-depth.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-eng.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-feed.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-final-depth.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-final-feed.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-final-num.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-final-spindle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-params.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-penetration-angle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-percent.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-probe.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-spindle.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-usage.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool-vertical-feed.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/tool.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/torch.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/touch-off.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/trowel.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/truetype.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/uni-bi-direction.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/upper-level-icon.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/upper-level.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/wall-thickness.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/washer-t.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/washer.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/width.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/x-end.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/x.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/xy-axes.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/xyz-axes.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/y-end.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/y.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/youtube.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/z-end.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/z.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/zoom-100.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/zoom-fit.png
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/source/create_icons.py
/home/vm1/linuxcnc/configs/sim.axis/ncam/graphics/source/icons.svg
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/boring.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/facing.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/init_turning.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/radius_od.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/show_stock.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/taper.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/taper_id.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/threading.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/lathe/turning.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/add_mill_data.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/circle-k.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/circle-k_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/circle.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/circle_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/diamond.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/diamond_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/drill_single.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/ellipse.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/ellipse_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/g123.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/lead_in.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/lead_out.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/optimize.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_add_data.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_add_item.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_copy_mill.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_link.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_link_dir.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_mill.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_mirror_p.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/poly_reverse.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/polygon.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/polygon_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/probe_stock.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/rectangle.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/rectangle_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/set_next_cut_level.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/set_tool_len_comp.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/shcs_size.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/slot_arc.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/slot_arc_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/stock.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/surf_finish.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/thread-milling.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/mill/trace.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/add_cut_data.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/circle.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/circle_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/ellipse.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/ellipse_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/lead_in.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/lead_out.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_add_data.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_add_item.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_copy_cut.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_cut.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_link.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_link_dir.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_mirror_p.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/poly_reverse.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/polygon.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/polygon_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/rectangle.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/rectangle_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/slot_arc.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/slot_arc_create.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/stock.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/plasma/trace.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/angle.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/get_arc_len.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/get_feed_rate_and_speed.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/get_max.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/get_min.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/get_offsets.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/in_list.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/isect_arcs.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/isect_line_arc.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/isect_lines.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/line.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/probe.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/rotate_xy.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/select.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/set_feed_rate_and_speed.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/lib/utilities/set_spindle_rpm.ngc
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/de
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/en
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/fr
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/translating
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/de/LC_MESSAGES
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/de/LC_MESSAGES/nativecam.mo
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/de/LC_MESSAGES/nativecam.po
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/en/LC_MESSAGES
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/en/LC_MESSAGES/nativecam.po
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/fr/LC_MESSAGES
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/fr/LC_MESSAGES/nativecam.mo
/home/vm1/linuxcnc/configs/sim.axis/ncam/locale/fr/LC_MESSAGES/nativecam.po
/home/vm1/linuxcnc/configs/sim.axis/ncam/man/man1
/home/vm1/linuxcnc/configs/sim.axis/ncam/man/man1/nativecam.1
/home/vm1/linuxcnc/configs/sim.axis/ncam/man/man1/ncam.1
/home/vm1/linuxcnc/configs/sim.axis/ncam/my-stuff/README
vm1@vm1-VirtualBox:~$