Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0-pre0-3038-gb71e373b2 Machine configuration directory is '/home/travis/linuxcnc/configs/my_LinuxCNC_machine' Machine configuration file is 'my_LinuxCNC_machine.ini' INIFILE=/home/travis/linuxcnc/configs/my_LinuxCNC_machine/my_LinuxCNC_machine.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./my_LinuxCNC_machine.hal Shutting down and cleaning up LinuxCNC... Running HAL shutdown script hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: INFO: Hardware address (MAC): 00:60:1b:11:81:5d hm2_eth: discovered 7I80HD-16 hm2/hm2_7i80.0: Low Level init 0.15 hm2/hm2_7i80.0: Smart Serial Firmware Version 43 hm2/hm2_7i80.0: 72 I/O Pins used: hm2/hm2_7i80.0: IO Pin 000 (P1-01): PWMGen #0, pin Not-Enable (Output) hm2/hm2_7i80.0: IO Pin 001 (P1-03): IOPort hm2/hm2_7i80.0: IO Pin 002 (P1-05): IOPort hm2/hm2_7i80.0: IO Pin 003 (P1-07): IOPort hm2/hm2_7i80.0: IO Pin 004 (P1-09): IOPort hm2/hm2_7i80.0: IO Pin 005 (P1-11): IOPort hm2/hm2_7i80.0: IO Pin 006 (P1-13): IOPort hm2/hm2_7i80.0: IO Pin 007 (P1-15): IOPort hm2/hm2_7i80.0: IO Pin 008 (P1-17): IOPort hm2/hm2_7i80.0: IO Pin 009 (P1-19): IOPort hm2/hm2_7i80.0: IO Pin 010 (P1-21): IOPort hm2/hm2_7i80.0: IO Pin 011 (P1-23): PWMGen #0, pin Out0 (PWM or Up) (Output) hm2/hm2_7i80.0: IO Pin 012 (P1-25): PWMGen #0, pin Out1 (Dir or Down) (Output) hm2/hm2_7i80.0: IO Pin 013 (P1-27): IOPort hm2/hm2_7i80.0: IO Pin 014 (P1-29): IOPort hm2/hm2_7i80.0: IO Pin 015 (P1-31): IOPort hm2/hm2_7i80.0: IO Pin 016 (P1-33): IOPort hm2/hm2_7i80.0: IO Pin 017 (P1-35): IOPort hm2/hm2_7i80.0: IO Pin 018 (P1-37): IOPort hm2/hm2_7i80.0: IO Pin 019 (P1-39): IOPort hm2/hm2_7i80.0: IO Pin 020 (P1-41): IOPort hm2/hm2_7i80.0: IO Pin 021 (P1-43): IOPort hm2/hm2_7i80.0: IO Pin 022 (P1-45): IOPort hm2/hm2_7i80.0: IO Pin 023 (P1-47): PWMGen #0, pin Not-Enable (Output) hm2/hm2_7i80.0: IO Pin 024 (P2-01): IOPort hm2/hm2_7i80.0: IO Pin 025 (P2-03): IOPort hm2/hm2_7i80.0: IO Pin 026 (P2-05): IOPort hm2/hm2_7i80.0: IO Pin 027 (P2-07): IOPort hm2/hm2_7i80.0: IO Pin 028 (P2-09): IOPort hm2/hm2_7i80.0: IO Pin 029 (P2-11): IOPort hm2/hm2_7i80.0: IO Pin 030 (P2-13): IOPort hm2/hm2_7i80.0: IO Pin 031 (P2-15): IOPort hm2/hm2_7i80.0: IO Pin 032 (P2-17): IOPort hm2/hm2_7i80.0: IO Pin 033 (P2-19): IOPort hm2/hm2_7i80.0: IO Pin 034 (P2-21): IOPort hm2/hm2_7i80.0: IO Pin 035 (P2-23): IOPort hm2/hm2_7i80.0: IO Pin 036 (P2-25): IOPort hm2/hm2_7i80.0: IO Pin 037 (P2-27): IOPort hm2/hm2_7i80.0: IO Pin 038 (P2-29): IOPort hm2/hm2_7i80.0: IO Pin 039 (P2-31): IOPort hm2/hm2_7i80.0: IO Pin 040 (P2-33): IOPort hm2/hm2_7i80.0: IO Pin 041 (P2-35): IOPort hm2/hm2_7i80.0: IO Pin 042 (P2-37): IOPort hm2/hm2_7i80.0: IO Pin 043 (P2-39): IOPort hm2/hm2_7i80.0: IO Pin 044 (P2-41): IOPort hm2/hm2_7i80.0: IO Pin 045 (P2-43): IOPort hm2/hm2_7i80.0: IO Pin 046 (P2-45): IOPort hm2/hm2_7i80.0: IO Pin 047 (P2-47): IOPort hm2/hm2_7i80.0: IO Pin 048 (P3-01): IOPort hm2/hm2_7i80.0: IO Pin 049 (P3-03): IOPort hm2/hm2_7i80.0: IO Pin 050 (P3-05): IOPort hm2/hm2_7i80.0: IO Pin 051 (P3-07): IOPort hm2/hm2_7i80.0: IO Pin 052 (P3-09): IOPort hm2/hm2_7i80.0: IO Pin 053 (P3-11): IOPort hm2/hm2_7i80.0: IO Pin 054 (P3-13): IOPort hm2/hm2_7i80.0: IO Pin 055 (P3-15): IOPort hm2/hm2_7i80.0: IO Pin 056 (P3-17): IOPort hm2/hm2_7i80.0: IO Pin 057 (P3-19): IOPort hm2/hm2_7i80.0: IO Pin 058 (P3-21): IOPort hm2/hm2_7i80.0: IO Pin 059 (P3-23): IOPort hm2/hm2_7i80.0: IO Pin 060 (P3-25): IOPort hm2/hm2_7i80.0: IO Pin 061 (P3-27): IOPort hm2/hm2_7i80.0: IO Pin 062 (P3-29): IOPort hm2/hm2_7i80.0: IO Pin 063 (P3-31): IOPort hm2/hm2_7i80.0: IO Pin 064 (P3-33): IOPort hm2/hm2_7i80.0: IO Pin 065 (P3-35): IOPort hm2/hm2_7i80.0: IO Pin 066 (P3-37): IOPort hm2/hm2_7i80.0: IO Pin 067 (P3-39): IOPort hm2/hm2_7i80.0: IO Pin 068 (P3-41): IOPort hm2/hm2_7i80.0: IO Pin 069 (P3-43): IOPort hm2/hm2_7i80.0: IO Pin 070 (P3-45): IOPort hm2/hm2_7i80.0: IO Pin 071 (P3-47): IOPort hm2/hm2_7i80.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime ./my_LinuxCNC_machine.hal:10: parameter or pin 'hm2_7i80hd.0.pwmgen.pwm_frequency' not found 5065 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sat 12 Dec 2020 04:02:02 AM EST UTC Date: Sat 12 Dec 2020 09:02:02 AM UTC this program: /usr/bin/linuxcnc_info uptime: 04:02:02 up 41 min, 1 user, load average: 1.14, 0.71, 0.67 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster which linuxcnc: /usr/bin/linuxcnc pwd: /home/travis/linuxcnc/configs/my_LinuxCNC_machine USER: travis LOGNAME: travis HOME: /home/travis EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: gnome-classic display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/travis/linuxcnc/configs/my_LinuxCNC_machine/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: linuxcnc3 kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.160-2 (2020-11-28) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-13-rt-amd64 root=UUID=b5e904f2-1fd0-4f5e-9cbe-4c5090cd1148 ro quiet splash resume=UUID=8f2f9008-6d60-4aac-a941-e84f5c277e22 model name: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz cores: 2 cpu MHz: 2627.263 parport: 0000-0000 : parport0 serial: 0000-0000 : serial 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 2.7.16 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0-pre0-3038-gb71e373b2 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python2.7 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===============-============================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.9.0~pre0.3038.gb71e373b2 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) ii linuxcnc-uspace 1:2.9.0~pre0.3038.gb71e373b2 amd64 motion controller for CNC machines and robots