linuxcnc axis.ini
LINUXCNC - 2.8.0~pre1
Machine configuration directory is '/home/plotter/linuxcnc/configs/ToBePosted/sim.axis_ethercat_2passes'
Machine configuration file is 'axis.ini'
Starting LinuxCNC...
twopass:invoked with <> options
twopass:found ./core_sim.hal
twopass:found ./lcec_ini.hal
twopass:found ./sim_spindle_encoder.hal
twopass:found ./axis_manualtoolchange.hal
twopass:found ./simulated_home.hal
twopass:found ./check_xyz_constraints.hal
Note: Using POSIX realtime
LCEC: lcec_conf is not loaded
lcec: rtapi_app_main: Invalid argument (-22)

twopass: load_the_modules cmd=<orig_loadrt lcec>
waitpid failed /usr/bin/rtapi_app lcec
/usr/bin/rtapi_app exited without becoming ready
insmod for lcec failed, returned -1

HAL: ERROR: function 'lcec.read-all' not found
twopass: Error in file ./lcec_ini.hal:
    addf failed
LCEC: lcec_conf is not loaded

lcec: rtapi_app_main: Invalid argument (-22)

task: main loop took 0.019290 seconds
note: MAXV     max: 5.000 units/sec 300.000 units/min
note: LJOG     max: 5.000 units/sec 300.000 units/min
note: LJOG default: 0.250 units/sec 15.000 units/min
note: jog_order='XYZ'
note: jog_invert=set([])
postgui.hal:5: Pin 'lcec.0.2.dout-0' does not exist
Shutting down and cleaning up LinuxCNC...
task: 1802 cycles, min=0.000019, max=0.019290, avg=0.001094, 1 latency excursions (> 10x expected cycle time of 0.001000s)
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/plotter/linuxcnc_debug.txt
and
    /home/plotter/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal