Machine configuration directory is '/home/robot3t/RB3T-linuxcnc-dev/configs/sim/gscreen'
Machine configuration file is 'gscreen.ini'
Starting LinuxCNC...
Found file(lib): /home/robot3t/RB3T-linuxcnc-dev/lib/hallib/core_sim.hal
Note: Using POSIX realtime
Found file(lib): /home/robot3t/RB3T-linuxcnc-dev/lib/hallib/sim_spindle_encoder.hal
Found file(lib): /home/robot3t/RB3T-linuxcnc-dev/lib/hallib/axis_manualtoolchange.hal
Found file(lib): /home/robot3t/RB3T-linuxcnc-dev/lib/hallib/simulated_home.hal
**** GSCREEN INFO: audio available!

**** GSCREEN INFO:  using STOCK glade file from: /home/robot3t/RB3T-linuxcnc-dev/share/linuxcnc/gscreen2.glade ****

**** GSCREEN INFO:  No Screen 2 glade file present
*******************************************************
1
Traceback (most recent call last):
  File "/home/robot3t/RB3T-linuxcnc-dev/bin/gscreen", line 4636, in <module>
    app = Gscreen()
  File "/home/robot3t/RB3T-linuxcnc-dev/bin/gscreen", line 534, in __init__
    self.audio = Player()
  File "/home/robot3t/RB3T-linuxcnc-dev/bin/gscreen", line 191, in __init__
    self.player = gst.element_factory_make("playbin", "player")
ElementNotFoundError: playbin

*******************************************************
1
Shutting down and cleaning up LinuxCNC...
task: 2394 cycles, min=0.000007, max=0.004137, avg=0.001055, 0 latency excursions (> 10x expected cycle time of 0.001000s)
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/robot3t/linuxcnc_debug.txt
and
    /home/robot3t/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal