Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0-pre0-4361-gac03a9aec Machine configuration directory is '/home/rob/linuxcnc/configs/Lathe-GMO' Machine configuration file is 'Lathe-GMO.ini.expanded' INIFILE=/home/rob/linuxcnc/configs/Lathe-GMO/Lathe-GMO.ini.expanded VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=gmoccapy COORDINATES=XZ KINEMATICS=trivkins coordinates=XZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui twopass:invoked with <> options twopass:found ./Lathe-GMO.hal twopass:found ./custom.hal twopass:found /usr/share/linuxcnc/hallib/xhc-hb04.tcl twopass:pass0: loadusr -W hal_manualtoolchange twopass:pass0: loadusr sendkeys config=t2 xhc-hb04.tcl: suppressing messages in twopass pass0 twopass:pass0: loadusr -W xhc-hb04 -s 5 -I /usr/share/linuxcnc/hallib/xhc-hb04-layout2.cfg -H SET_EVBIT 29 SET_EVBIT 57 xhc-hb04.tcl: Using existing outpin signame: spindle-vel-cmd-rps-abs Starting TASK program: milltask DELAY= APP: monitor-xhc-hb04 found: Starting DISPLAY program: gmoccapy gladevcp: auxiliary dir: b'/usr/share/linuxcnc/aux_gladevcp/NativeCAM' Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 158 cycles, min=0.000014, max=0.010306, avg=0.009149, 0 latency excursions (> 10x expected cycle time of 0.010000s) sendkeys: exiting xhc-hb04: waiting for XHC-HB04 device xhc-hb04: found XHC-HB04 device xhc-hb04: connection lost, cleaning up hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:12:06:bc hm2_eth: discovered 7I92 hm2/hm2_7i92.0: Low Level init 0.15 hm2/hm2_7i92.0: Smart Serial Firmware Version 43 Board hm2_7i92.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i92.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i92.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i92.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i92.0: 34 I/O Pins used: hm2/hm2_7i92.0: IO Pin 000 (P2-01): StepGen #0, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 001 (P2-14): StepGen #0, pin Step (Output) hm2/hm2_7i92.0: IO Pin 002 (P2-02): StepGen #1, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 003 (P2-15): StepGen #1, pin Step (Output) hm2/hm2_7i92.0: IO Pin 004 (P2-03): StepGen #2, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 005 (P2-16): StepGen #2, pin Step (Output) hm2/hm2_7i92.0: IO Pin 006 (P2-04): StepGen #3, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 007 (P2-17): StepGen #3, pin Step (Output) hm2/hm2_7i92.0: IO Pin 008 (P2-05): StepGen #4, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 009 (P2-06): StepGen #4, pin Step (Output) hm2/hm2_7i92.0: IO Pin 010 (P2-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i92.0: IO Pin 011 (P2-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i92.0: IO Pin 012 (P2-09): IOPort hm2/hm2_7i92.0: IO Pin 013 (P2-10): IOPort hm2/hm2_7i92.0: IO Pin 014 (P2-11): IOPort hm2/hm2_7i92.0: IO Pin 015 (P2-12): IOPort hm2/hm2_7i92.0: IO Pin 016 (P2-13): Encoder #0, pin A (Input) hm2/hm2_7i92.0: IO Pin 017 (P1-01): IOPort hm2/hm2_7i92.0: IO Pin 018 (P1-14): IOPort hm2/hm2_7i92.0: IO Pin 019 (P1-02): IOPort hm2/hm2_7i92.0: IO Pin 020 (P1-15): IOPort hm2/hm2_7i92.0: IO Pin 021 (P1-03): IOPort hm2/hm2_7i92.0: IO Pin 022 (P1-16): IOPort hm2/hm2_7i92.0: IO Pin 023 (P1-04): IOPort hm2/hm2_7i92.0: IO Pin 024 (P1-17): IOPort hm2/hm2_7i92.0: IO Pin 025 (P1-05): IOPort hm2/hm2_7i92.0: IO Pin 026 (P1-06): IOPort hm2/hm2_7i92.0: IO Pin 027 (P1-07): IOPort hm2/hm2_7i92.0: IO Pin 028 (P1-08): IOPort hm2/hm2_7i92.0: IO Pin 029 (P1-09): IOPort hm2/hm2_7i92.0: IO Pin 030 (P1-10): IOPort hm2/hm2_7i92.0: IO Pin 031 (P1-11): IOPort hm2/hm2_7i92.0: IO Pin 032 (P1-12): IOPort hm2/hm2_7i92.0: IO Pin 033 (P1-13): IOPort hm2/hm2_7i92.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime Cannot open /dev/uinput. Suggest chmod 666 /dev/uinput xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: using std_start_pause_button Failed to make some required connections Signal: : Pin 'halui.mdi-command-03' was already linked to signal 'pendant:goto-zero-z' Can not find -sec APPLICATIONS -var DELAY -num 1 Traceback (most recent call last): File "/usr/bin/gmoccapy", line 43, in import gladevcp.makepins # needed for the dialog"s calculator widget File "/usr/lib/python3/dist-packages/gladevcp/__init__.py", line 57, in for fname in glob.glob(auxdir + "/*.py"): TypeError: can't concat str to bytes 9310 9356 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sun 1 Aug 11:41:23 BST 2021 UTC Date: Sun 1 Aug 10:41:23 UTC 2021 this program: /usr/bin/linuxcnc_info uptime: 11:41:23 up 19 min, 1 user, load average: 1.60, 1.00, 0.74 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster which linuxcnc: /usr/bin/linuxcnc pwd: /home/rob/linuxcnc/configs/Lathe-GMO USER: rob LOGNAME: rob HOME: /home/rob EDITOR: VISUAL: LANGUAGE: en_GB:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/rob/linuxcnc/configs/Lathe-GMO/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: RobsCNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.194-3 (2021-07-18) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-17-rt-amd64 root=UUID=a0d90f85-0b0e-4ce2-9b42-fa8b4f385b81 ro quiet splash isolcpus=1,3 model name: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz cores: 2 cpu MHz: 2394.371 parport: serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 3.7.3 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0-pre0-4361-gac03a9aec LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-============================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.9.0~pre0.4361.gac03a9aec all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.9.0~pre0.4361.gac03a9aec amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.0~pre0.4361.gac03a9aec amd64 PC based motion controller for real-time Linux