#plasmac material file
#the next line is required for version checking
[VERSION 1.1]

#example only, may be deleted
#[MATERIAL_NUMBER_1]
#NAME               = 
#KERF_WIDTH         = 
#THC                = (0 = off, 1 = on)
#PIERCE_HEIGHT      = 
#PIERCE_DELAY       = 
#PUDDLE_JUMP_HEIGHT = (optional, set to 0 or delete if not required)
#PUDDLE_JUMP_DELAY  = (optional, set to 0 or delete if not required)
#CUT_HEIGHT         = 
#CUT_SPEED          = 
#CUT_AMPS           = (optional, only used for operator information)
#CUT_VOLTS          = (modes 0 & 1 only, if not using auto voltage sampling)

[MATERIAL_NUMBER_1]
NAME               = 16Ga Steel
KERF_WIDTH         = 0.05
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .1
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 320
CUT_AMPS           = 45
CUT_VOLTS          = 125

[MATERIAL_NUMBER_2]
NAME               = 14Ga Steel
KERF_WIDTH         = 0.05
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .2
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 320
CUT_AMPS           = 45
CUT_VOLTS          = 125

[MATERIAL_NUMBER_3]
NAME               = 10Ga Steel
KERF_WIDTH         = 0.06
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .4
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 181
CUT_AMPS           = 45
CUT_VOLTS          = 125

[MATERIAL_NUMBER_4]
NAME               = 3/16 Steel
KERF_WIDTH         = 0.06
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .5
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 122
CUT_AMPS           = 45
CUT_VOLTS          = 127

[MATERIAL_NUMBER_5]
NAME               = 1/4 Steel
KERF_WIDTH         = 0.06
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .5
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 72
CUT_AMPS           = 45
CUT_VOLTS          = 127

[MATERIAL_NUMBER_6]
NAME               = 3/8 Steel
KERF_WIDTH         = 0.07
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .8
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 38
CUT_AMPS           = 45
CUT_VOLTS          = 133

[MATERIAL_NUMBER_7]
NAME               = 1/2 Steel
KERF_WIDTH         = 0.07
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = 1
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 24
CUT_AMPS           = 45
CUT_VOLTS          = 139

[MATERIAL_NUMBER_8]
NAME               = 20Ga Fine Cut
KERF_WIDTH         = 0.02
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .1
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 325
CUT_AMPS           = 40
CUT_VOLTS          = 78

[MATERIAL_NUMBER_9]
NAME               = 18Ga Fine Cut
KERF_WIDTH         = 0.04
THC                = .2
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = 1
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 325
CUT_AMPS           = 40
CUT_VOLTS          = 78

[MATERIAL_NUMBER_10]
NAME               = 16Ga Fine Cut
KERF_WIDTH         = 0.05
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .4
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 250
CUT_AMPS           = 45
CUT_VOLTS          = 78

[MATERIAL_NUMBER_11]
NAME               = 14Ga Fine Cut
KERF_WIDTH         = 0.05
THC                = .4
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = 1
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 200
CUT_AMPS           = 45
CUT_VOLTS          = 78

[MATERIAL_NUMBER_12]
NAME               = 12Ga Fine Cut
KERF_WIDTH         = 0.05
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .5
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 120
CUT_AMPS           = 45
CUT_VOLTS          = 78

[MATERIAL_NUMBER_13]
NAME               = 10Ga Fine Cut
KERF_WIDTH         = 0.05
THC                = 1
PIERCE_HEIGHT      = 0.75
PIERCE_DELAY       = .5
PUDDLE_JUMP_HEIGHT = 0.00
PUDDLE_JUMP_DELAY  = 0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 95
CUT_AMPS           = 45
CUT_VOLTS          = 78