# plasmac config tab configuration file
# format is: name = value

version=0.1

arc-fail-delay=3.0
arc-max-starts=3.0
arc-ok-high=9999.0
arc-ok-low=30.0
arc-restart-delay=3.0
arc-voltage-offset=3690.0
arc-voltage-scale=0.011961
cornerlock-threshold=90.0
float-switch-travel=0.125
height-per-volt=0.004
kerfcross-override=100.0
ohmic-max-attempts=3.0
ohmic-probe-offset=0.0
pid-d-gain=0.0
pid-i-gain=0.0
pid-p-gain=10.0
probe-feed-rate=20.0
probe-start-height=3.0
safe-height=0.75
scribe-arm-delay=0.0
scribe-on-delay=0.0
setup-feed-rate=100.0
skip-ihs-distance=0.0
spotting-threshold=0.0
spotting-time=0.0
thc-delay=1.5
thc-threshold=1.0