bryan@bryan-linux ~/linuxcnc-dev $ ./scripts/linuxcnc LINUXCNC - 2.9.0~pre0 Machine configuration directory is '/home/bryan/linuxcnc/configs/avid_QT' Machine configuration file is 'avid_QT.ini' Starting LinuxCNC... twopass:invoked with <> options twopass:found ./avidcnc_plasma.hal twopass:found /home/bryan/linuxcnc-dev/lib/hallib/plasmac.tcl twopass:found ./avid_QT_connections.hal twopass:found ./hypersensing.hal using old debounce component it is recommended to convert to the new dbounce component Note: Using POSIX realtime trivkins: coordinates:XYYZ Joint 0 ==> Axis X Joint 1 ==> Axis Y Joint 2 ==> Axis Y Joint 3 ==> Axis Z hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:04:00.0 hm2/hm2_5i25.0: Low Level init 0.15 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort hm2/hm2_5i25.0: IO Pin 014 (P3-11): IOPort hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #1, pin A (Input) hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:04:00.0 link (updating variable file): No such file or directory [QTvcp][INFO] Logging to "/home/bryan/qtvcp.log" (logger.py:100) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_1_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_1_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_1_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_1_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_1_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_2_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_2_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_2_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_2_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:378) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_2_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:378) [QTvcp.QTVCP.QT_PSTAT][INFO] Using DEFAULT handler file path: /home/bryan/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py (qt_pstat.py:93) [QTvcp.QTVCP.QT_PSTAT][INFO] Using DEFAULT ui file from /home/bryan/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac.ui (qt_pstat.py:114) [QTvcp.QTVCP.QT_PSTAT][INFO] No qss file found (qt_pstat.py:150) [QTvcp.QTVCP.QT_PSTAT][INFO] No qrc file found (qt_pstat.py:174) [QTvcp.QTVCP.QT_PSTAT][INFO] No resources.py file found, No QRC file to compile one from. (qt_pstat.py:209) [QTvcp][INFO] Building A Linuxcnc Main Screen with Python 2 (qtvcp:136) [QTvcp][INFO] No handler file specified on command line (qtvcp:154) [QTvcp][INFO] No HAL component base name specified on command line using: qtplasmac (qtvcp:185) [QTvcp.QTVCP.QT_MAKEGUI][INFO] No resource file to load: None (qt_makegui.py:182) No section: 'DIALOG_OPTIONS' Adding section DIALOG_OPTIONS No option 'EntryDialog_sound_type' in section: 'DIALOG_OPTIONS' No option 'fileDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'fileDialog_sound_type' in section: 'DIALOG_OPTIONS' No section: 'BOOK_KEEPING' Adding section BOOK_KEEPING No section: 'SCREEN_OPTIONS' Adding section SCREEN_OPTIONS No option 'overlay_sound_type' in section: 'SCREEN_OPTIONS' No option 'KeyboardDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'KeyboardDialog_sound_type' in section: 'DIALOG_OPTIONS' No option 'CalculatorDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'CalculatorDialog_sound_type' in section: 'DIALOG_OPTIONS' No option 'catch_errors' in section: 'SCREEN_OPTIONS' No option 'desktop_notify' in section: 'SCREEN_OPTIONS' No option 'shutdown_check' in section: 'SCREEN_OPTIONS' No option 'sound_player_on' in section: 'SCREEN_OPTIONS' No section: 'MCH_MSG_OPTIONS' Adding section MCH_MSG_OPTIONS No option 'mchnMsg_speak_errors' in section: 'MCH_MSG_OPTIONS' No option 'mchnMsg_sound_type' in section: 'MCH_MSG_OPTIONS' No section: 'USR_MSG_OPTIONS' Adding section USR_MSG_OPTIONS No option 'userMsg_sound_type' in section: 'USR_MSG_OPTIONS' No option 'userMsg_use_focusOverlay' in section: 'USR_MSG_OPTIONS' No section: 'SHUTDOWN_OPTIONS' Adding section SHUTDOWN_OPTIONS No option 'shutdown_alert_sound_type' in section: 'SHUTDOWN_OPTIONS' No option 'shutdown_exit_sound_type' in section: 'SHUTDOWN_OPTIONS' No option 'shutdown_msg_title' in section: 'SHUTDOWN_OPTIONS' No option 'shutdown_msg_detail' in section: 'SHUTDOWN_OPTIONS' No option 'RecentPath_0' in section: 'BOOK_KEEPING' No section: 'GUI_OPTIONS' Adding section GUI_OPTIONS No option 'Use soft keyboard' in section: 'GUI_OPTIONS' No option 'Show materials' in section: 'GUI_OPTIONS' No option 'Run from line' in section: 'GUI_OPTIONS' No option 'Preview cone size' in section: 'GUI_OPTIONS' No option 'Preview grid size' in section: 'GUI_OPTIONS' No section: 'COLOR_OPTIONS' Adding section COLOR_OPTIONS No option 'Highlight' in section: 'COLOR_OPTIONS' No option 'LED' in section: 'COLOR_OPTIONS' No option 'Background' in section: 'COLOR_OPTIONS' No option 'Background Alt' in section: 'COLOR_OPTIONS' No option 'Frames' in section: 'COLOR_OPTIONS' No option 'Estop' in section: 'COLOR_OPTIONS' No option 'Disabled' in section: 'COLOR_OPTIONS' No option 'Preview' in section: 'COLOR_OPTIONS' invalid literal for int() with base 10: '3.0' invalid literal for int() with base 10: '3.0' [QTvcp][CRITICAL] Aborted from Error Dialog Qtvcp encountered an error. The following information may be useful in troubleshooting: LinuxCNC Version : 2.9.0~pre0 Traceback (most recent call last): File "/home/bryan/linuxcnc-dev/bin/qtvcp", line 415, in APP = QTVCP() File "/home/bryan/linuxcnc-dev/bin/qtvcp", line 260, in __init__ window.handler_instance.initialized__() File "/home/bryan/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 274, in initialized__ self.set_color_styles() File "/home/bryan/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 3918, in set_color_styles self.color_button_image(button, self.foreColor) File "/home/bryan/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 4028, in color_button_image pColor = self.image.pixelColor(x, y) AttributeError: 'QImage' object has no attribute 'pixelColor' (qtvcp:408)