[QtDesigner][INFO]  Logging to "/home/rmann/qtdesigner.log" (logger.py:88)
[QTvcp][INFO]  Logging to "/home/rmann/qtvcp.log" (logger.py:88)
[QTvcp][INFO]  Base log level set to 20 (logger.py:52)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  BASEPATH qtaxis (qt_pstat.py:62)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for handler file in: None Found (qt_pstat.py:82)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for default handler file in: /usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py (qt_pstat.py:88)
[QtDesigner.QTVCP.QT_PSTAT][INFO]  Using DEFAULT handler file path: /usr/share/qtvcp/screens/qtaxis/qtaxis_handler.py (qt_pstat.py:91)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for .ui in: None Found (qt_pstat.py:108)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for .ui in: /usr/share/qtvcp/screens/qtaxis/qtaxis.ui (qt_pstat.py:113)
[QtDesigner.QTVCP.QT_PSTAT][INFO]  Using DEFAULT ui file from /usr/share/qtvcp/screens/qtaxis/qtaxis.ui (qt_pstat.py:115)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for .qss in: None Found (qt_pstat.py:148)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for .qss in: /usr/share/qtvcp/screens/qtaxis/qtaxis.qss (qt_pstat.py:153)
[QtDesigner.QTVCP.QT_PSTAT][INFO]  Using DEFAULT qss file from /usr/share/qtvcp/screens/qtaxis/qtaxis.qss (qt_pstat.py:155)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for .qrc in: None Found (qt_pstat.py:174)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for .qrc in: /usr/share/qtvcp/screens/qtaxis/qtaxis.qrc (qt_pstat.py:180)
[QtDesigner.QTVCP.QT_PSTAT][INFO]  No qrc file found (qt_pstat.py:187)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for resources.py in: /home/rmann/router/repo/linuxcnc/config/router3/resources.py (qt_pstat.py:203)
[QtDesigner.QTVCP.QT_PSTAT][DEBUG]  Checking for resources.py in: /usr/share/qtvcp/screens/qtaxis/resources.py (qt_pstat.py:214)
[QtDesigner.QTVCP.QT_PSTAT][INFO]  No resources.py file found, No QRC file to compile one from. (qt_pstat.py:226)
[QTvcp][INFO]  Building A Linuxcnc Main Screen with Python 2 (qtvcp:124)
[QTvcp][INFO]  No handler file specified on command line (qtvcp:142)
[QTvcp][INFO]  No HAL component base name specified on command line using: qtaxis (qtvcp:173)
[QTvcp.QTVCP.QT_MAKEGUI][INFO]  No resource file to load: None (qt_makegui.py:173)
['0', '.1 mm', '1 mm', '10 mm', '50 mm']
[QTvcp.QTVCP.WIDGETS.WIDGET_BASECLASS][WARNING]  Nno objectName for HAL pin: <qtvcp.widgets.status_label.StatusLabel object at 0x7f6bc86f8c30> (widget_baseclass.py:54)
[QTvcp][CRITICAL]  With window resize data (qtvcp:290)
Usage: qtvcp [options] myfile.ui

Shutting down and cleaning up LinuxCNC...
task: 250 cycles, min=0.000024, max=0.010848, avg=0.009485, 0 latency excursions (> 10x expected cycle time of 0.010000s)
shuttle: exiting
hm2_eth: in hm2_eth_reset
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/rmann/linuxcnc_debug.txt
and
    /home/rmann/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal