Error report created by /home/pi/linuxcnc-rp10/tcl/show_errors.tcl: Print file information: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/pi/linuxcnc-rp10/bin LINUXCNC_TCL_DIR=/home/pi/linuxcnc-rp10/tcl LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/home/pi/linuxcnc-rp10/rtlib LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/home/pi/linuxcnc-rp10/src/objects INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0~pre0 Machine configuration directory is '/home/pi/linuxcnc/configs/hm2-stepper' Machine configuration file is '7i90.ini' INIFILE=/home/pi/linuxcnc/configs/hm2-stepper/7i90.ini VERSION=1.1 PARAMETER_FILE=hm2-stepper.var TASK=milltask HALUI= DISPLAY=axis COORDINATES=X Y Z KINEMATICS=trivkins Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Found file(REL): ./hm2-stepper.hal Shutting down and cleaning up LinuxCNC... hm2: loading Mesa HostMot2 driver version 0.15 hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime hm2_rpspi: Unknown board at SPI0/CE0: MESA7C81 hm2_rpspi: rtapi_app_main: Operation not permitted (-1) ./hm2-stepper.hal:38: waitpid failed /home/pi/linuxcnc-rp10/bin/rtapi_app hm2_rpspi ./hm2-stepper.hal:38: /home/pi/linuxcnc-rp10/bin/rtapi_app exited without becoming ready ./hm2-stepper.hal:38: insmod for hm2_rpspi failed, returned -1 17664 Stopping realtime threads Unloading hal components hm2_rpspi: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 :0: unloadrt failed Note: Using POSIX realtime Kernel message information: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.58-rt22-v7l+ (root@raspberrypi) (gcc version 8.3.0 (Raspbian 8.3.0-6+rpi1)) #1 SMP PREEMPT RT Fri Jul 19 01:15:04 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x0000000037400000 [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 2133 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [ 0.000000] HighMem zone: 770048 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x500 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu s41504 r8192 d24032 u73728 [ 0.000000] pcpu-alloc: s41504 r8192 d24032 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010603 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:16:92:03 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=4af42e7a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash lapic noxsave acpi_osi= isolcpus=1,2,3 idle=poll acpi_irq_nobalance noirqbalance vmalloc=32MB clocksource=acpi_pm net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3931924K/4050944K available (8192K kernel code, 661K rwdata, 2364K rodata, 2048K init, 984K bss, 53484K reserved, 65536K cma-reserved, 3080192K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xfb800000 - 0xff800000 ( 64 MB) lowmem : 0xc0000000 - 0xfb400000 ( 948 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (10208 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) ( 662 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 985 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 28040 entries in 83 pages [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000014] Switching to timer-based delay loop, resolution 18ns [ 0.000240] Console: colour dummy device 80x30 [ 0.000262] console [tty1] enabled [ 0.000288] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000299] pid_max: default: 32768 minimum: 301 [ 0.000588] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000600] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001510] CPU: Testing write buffer coherency: ok [ 0.001967] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.060128] Setting up static identity map for 0x200000 - 0x20003c [ 0.100098] rcu: Hierarchical SRCU implementation. [ 0.180264] smp: Bringing up secondary CPUs ... [ 0.320910] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.461125] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.601347] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.601539] smp: Brought up 1 node, 4 CPUs [ 0.601557] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.601571] CPU: All CPU(s) started in HYP mode. [ 0.601585] CPU: Virtualization extensions available. [ 0.602677] devtmpfs: initialized [ 0.631571] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.632197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.632226] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.634182] pinctrl core: initialized pinctrl subsystem [ 0.636092] NET: Registered protocol family 16 [ 0.641381] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.644339] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.644355] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.644570] Serial: AMBA PL011 UART driver [ 0.649349] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.762275] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.766592] vgaarb: loaded [ 0.767147] SCSI subsystem initialized [ 0.767618] usbcore: registered new interface driver usbfs [ 0.767738] usbcore: registered new interface driver hub [ 0.767935] usbcore: registered new device driver usb [ 0.781395] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:03, variant start [ 0.791402] raspberrypi-firmware soc:firmware: Firmware hash is 9f8431fb7839c7f00f52b81f5822ddab2b31d0db [ 0.804095] clocksource: Switched to clocksource arch_sys_counter [ 1.013307] VFS: Disk quotas dquot_6.6.0 [ 1.013440] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.014140] FS-Cache: Loaded [ 1.014443] CacheFiles: Loaded [ 1.033862] NET: Registered protocol family 2 [ 1.035184] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 16384 bytes) [ 1.035234] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.035341] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) [ 1.035661] TCP: Hash tables configured (established 8192 bind 8192) [ 1.035959] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 1.036024] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 1.036615] NET: Registered protocol family 1 [ 1.067741] RPC: Registered named UNIX socket transport module. [ 1.067756] RPC: Registered udp transport module. [ 1.067770] RPC: Registered tcp transport module. [ 1.067784] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.067805] PCI: CLS 0 bytes, default 64 [ 1.084850] Initialise system trusted keyrings [ 1.085234] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.109693] FS-Cache: Netfs 'nfs' registered for caching [ 1.121045] NFS: Registering the id_resolver key type [ 1.121113] Key type id_resolver registered [ 1.121130] Key type id_legacy registered [ 1.121182] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.126721] Key type asymmetric registered [ 1.126741] Asymmetric key parser 'x509' registered [ 1.127087] bounce: pool size: 64 pages [ 1.127140] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.137506] io scheduler noop registered [ 1.137526] io scheduler deadline registered (default) [ 1.138113] io scheduler cfq registered [ 1.138132] io scheduler mq-deadline registered (default) [ 1.138150] io scheduler kyber registered [ 1.171026] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000 [ 1.171051] brcm-pcie fd500000.pcie: could not get clock [ 1.171124] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.171167] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000 [ 1.224179] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC) [ 1.224712] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.224741] pci_bus 0000:00: root bus resource [bus 00-01] [ 1.224762] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 1.224815] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.224981] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.227869] PCI: bus0: Fast back to back transfers disabled [ 1.227894] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.228172] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.228240] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.228435] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.231178] PCI: bus1: Fast back to back transfers disabled [ 1.231206] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01 [ 1.231267] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.231306] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.231342] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.231364] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.231724] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.232371] pcieport 0000:00:00.0: Signaling PME with IRQ 53 [ 1.232896] pcieport 0000:00:00.0: AER enabled with IRQ 53 [ 1.233106] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 1.233807] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.260199] Console: switching to colour frame buffer device 180x56 [ 1.266978] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1440x900 [ 1.272270] iproc-rng200 fe104000.rng: hwrng registered [ 1.272598] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.273605] vc-sm: Videocore shared memory driver [ 1.274409] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.298744] brd: module loaded [ 1.326339] loop: module loaded [ 1.327746] Loading iSCSI transport class v2.0-870. [ 1.341169] libphy: Fixed MDIO Bus: probed [ 1.341790] bcmgenet fd580000.genet: failed to get enet clock [ 1.341811] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000 [ 1.341833] bcmgenet fd580000.genet: failed to get enet-wol clock [ 1.341853] bcmgenet fd580000.genet: failed to get enet-eee clock [ 1.342279] unimac-mdio unimac-mdio.-19: DMA mask not set [ 1.354145] libphy: bcmgenet MII bus: probed [ 1.395003] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval) [ 1.396872] usbcore: registered new interface driver r8152 [ 1.397009] usbcore: registered new interface driver lan78xx [ 1.397129] usbcore: registered new interface driver smsc95xx [ 1.397478] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.397517] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.400222] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 1.400711] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54 [ 1.402391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.402410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.402427] usb usb1: Product: xHCI Host Controller [ 1.402443] usb usb1: Manufacturer: Linux 4.19.58-rt22-v7l+ xhci-hcd [ 1.402458] usb usb1: SerialNumber: 0000:01:00.0 [ 1.403652] hub 1-0:1.0: USB hub found [ 1.403726] hub 1-0:1.0: 1 port detected [ 1.404696] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.404724] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.404751] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.405424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.405442] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.405459] usb usb2: Product: xHCI Host Controller [ 1.405474] usb usb2: Manufacturer: Linux 4.19.58-rt22-v7l+ xhci-hcd [ 1.405489] usb usb2: SerialNumber: 0000:01:00.0 [ 1.406651] hub 2-0:1.0: USB hub found [ 1.406726] hub 2-0:1.0: 4 ports detected [ 1.408818] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.434553] dwc_otg fe980000.usb: base=(ptrval) [ 1.646431] Core Release: 2.80a [ 1.646449] Setting default values for core params [ 1.646479] Finished setting default values for core params [ 1.774144] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.847369] Using Buffer DMA mode [ 1.847385] Periodic Transfer Interrupt Enhancement - disabled [ 1.847398] Multiprocessor Interrupt Enhancement - disabled [ 1.847414] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.847432] Dedicated Tx FIFOs mode [ 1.848379] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = f7540000 dma = 0x00000000f7540000 len=9024 [ 1.848407] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 1.848440] dwc_otg: Microframe scheduler enabled [ 1.848560] WARN::hcd_init_fiq:457: FIQ on core 1 [ 1.848569] WARN::hcd_init_fiq:458: FIQ ASM at c07d1eec length 36 [ 1.848578] WARN::hcd_init_fiq:497: MPHI regs_base at fb810200 [ 1.848615] dwc_otg fe980000.usb: DWC OTG Controller [ 1.848653] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3 [ 1.848914] dwc_otg fe980000.usb: irq 37, io mem 0x00000000 [ 1.848971] Init: Port Power? op_state=1 [ 1.848985] Init: Power Port (0) [ 1.849417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.849435] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.849451] usb usb3: Product: DWC OTG Controller [ 1.849468] usb usb3: Manufacturer: Linux 4.19.58-rt22-v7l+ dwc_otg_hcd [ 1.849484] usb usb3: SerialNumber: fe980000.usb [ 1.850638] hub 3-0:1.0: USB hub found [ 1.850729] hub 3-0:1.0: 1 port detected [ 1.851825] dwc_otg: FIQ enabled [ 1.851839] dwc_otg: NAK holdoff enabled [ 1.851852] dwc_otg: FIQ split-transaction FSM enabled [ 1.851874] Module dwc_common_port init [ 1.862263] usbcore: registered new interface driver uas [ 1.862466] usbcore: registered new interface driver usb-storage [ 1.862865] mousedev: PS/2 mouse device common for all mice [ 1.865478] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.865938] bcm2835-cpufreq: min=600000 max=1500000 [ 1.867065] sdhci: Secure Digital Host Controller Interface driver [ 1.867079] sdhci: Copyright(c) Pierre Ossman [ 1.867983] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.868768] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.872959] hidraw: raw HID events driver (C) Jiri Kosina [ 1.873324] usbcore: registered new interface driver usbhid [ 1.873338] usbhid: USB HID core driver [ 1.874584] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 1.879822] [vc_sm_connected_init]: start [ 1.891059] [vc_sm_connected_init]: end - returning 0 [ 1.893263] Initializing XFRM netlink socket [ 1.893350] NET: Registered protocol family 17 [ 1.893602] Key type dns_resolver registered [ 1.894268] Registering SWP/SWPB emulation handler [ 1.895679] registered taskstats version 1 [ 1.895702] Loading compiled-in X.509 certificates [ 1.921263] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.921403] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 1.926522] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.927458] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver [ 1.928577] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.928594] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.955724] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1 [ 1.958769] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.958788] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.958805] usb 1-1: Product: USB2.0 Hub [ 1.963199] hub 1-1:1.0: USB hub found [ 1.963406] hub 1-1:1.0: 4 ports detected [ 1.979473] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.981511] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.983383] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.986830] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.988702] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.992920] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 2.002933] of_cfs_init [ 2.003145] of_cfs_init: OK [ 2.005103] Waiting for root device PARTUUID=4af42e7a-02... [ 2.010936] random: fast init done [ 2.086749] mmc1: new high speed SDIO card at address 0001 [ 2.124278] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.136153] mmcblk0: mmc0:aaaa SK32G 29.7 GiB [ 2.148459] mmcblk0: p1 p2 [ 2.177142] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.177253] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.178313] devtmpfs: mounted [ 2.188736] Freeing unused kernel memory: 2048K [ 2.188990] Run /sbin/init as init process [ 2.294409] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [ 2.432562] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07 [ 2.432583] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.432601] usb 1-1.4: Product: USB Receiver [ 2.432617] usb 1-1.4: Manufacturer: Logitech [ 2.702536] systemd[1]: System time before build time, advancing clock. [ 2.827000] NET: Registered protocol family 10 [ 2.839385] Segment Routing with IPv6 [ 2.882451] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.883703] systemd[1]: Detected architecture arm. [ 2.895639] systemd[1]: Set hostname to . [ 2.906034] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 3.949936] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.949964] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.417519] random: systemd: uninitialized urandom read (16 bytes read) [ 4.428473] random: systemd: uninitialized urandom read (16 bytes read) [ 4.436616] systemd[1]: Listening on Syslog Socket. [ 4.437268] random: systemd: uninitialized urandom read (16 bytes read) [ 4.448528] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.449709] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.478080] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.030308] i2c /dev entries driver [ 7.281630] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 7.778386] systemd-journald[123]: Received request to flush runtime journal from PID 1 [ 9.837803] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 9.840606] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 9.840631] [vc_sm_connected_init]: start [ 9.904354] [vc_sm_connected_init]: installed successfully [ 9.966041] media: Linux media interface: v0.10 [ 10.243968] videodev: Linux video capture interface: v2.00 [ 10.358989] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 10.465023] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 10.653717] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 10.864372] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 10.864391] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 10.917711] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 10.917730] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 11.062707] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 11.062726] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 11.198377] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 11.681058] bcm2835_audio soc:audio: card created with 8 channels [ 13.355523] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.716329] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.374698] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 14.404572] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 14.405327] usbcore: registered new interface driver brcmfmac [ 14.748869] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 14.777747] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 14.917604] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input2 [ 15.072065] input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input0 [ 15.073815] input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input1 [ 15.075546] input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input2 [ 15.075916] input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3 [ 15.076309] hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:01:00.0-1.4:1 [ 17.022667] random: crng init done [ 17.022685] random: 7 urandom warning(s) missed due to ratelimiting [ 19.178971] input: Logitech K400 Plus as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input7 [ 19.185218] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:01:00.0-1.4:1 [ 22.248387] uart-pl011 fe201000.serial: no DMA platform data [ 23.891685] 8021q: 802.1Q VLAN Support v1.8 [ 25.425026] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.425048] brcmfmac: power management disabled [ 26.505290] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay) [ 26.505855] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.524684] bcmgenet fd580000.genet eth0: Link is Down [ 28.648627] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 29.527772] Bluetooth: Core ver 2.22 [ 29.527830] NET: Registered protocol family 31 [ 29.527836] Bluetooth: HCI device and connection manager initialized [ 29.527858] Bluetooth: HCI socket layer initialized [ 29.527875] Bluetooth: L2CAP socket layer initialized [ 29.527945] Bluetooth: SCO socket layer initialized [ 29.604414] bcmgenet fd580000.genet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 29.604447] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.667397] Bluetooth: HCI UART driver ver 2.3 [ 29.667406] Bluetooth: HCI UART protocol H4 registered [ 29.667497] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 29.667715] Bluetooth: HCI UART protocol Broadcom registered [ 30.427460] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.427468] Bluetooth: BNEP filters: protocol multicast [ 30.427490] Bluetooth: BNEP socket layer initialized [ 30.532540] Bluetooth: RFCOMM TTY layer initialized [ 30.532564] Bluetooth: RFCOMM socket layer initialized [ 30.532591] Bluetooth: RFCOMM ver 1.11 [ 33.741466] fuse init (API version 7.27) [ 43.559926] logitech-hidpp-device 0003:046D:404D.0004: HID++ 4.1 device connected. ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sat 21 Sep 13:00:18 EST 2019 UTC Date: Sat 21 Sep 18:00:18 UTC 2019 this program: /home/pi/linuxcnc-rp10/scripts/linuxcnc_info uptime: 13:00:18 up 58 min, 2 users, load average: 0.46, 0.38, 0.56 lsb_release -sa: Raspbian Raspbian GNU/Linux 10 (buster) 10 buster which linuxcnc: /home/pi/linuxcnc-rp10/scripts/linuxcnc pwd: /home/pi/linuxcnc/configs/hm2-stepper USER: pi LOGNAME: pi HOME: /home/pi EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: LXDE-pi display size: 1440x900 pixels (381x238 millimeters) PATH: /home/pi/linuxcnc-rp10/bin:/home/pi/linuxcnc/configs/hm2-stepper/bin:/home/pi/linuxcnc-rp10/scripts:/home/pi/linuxcnc-rp10/bin:/home/pi/linuxcnc-rp10/bin:/home/pi/linuxcnc-rp10/scripts:/home/pi/linuxcnc-rp10/tcl:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games uname items: nodename -n: raspberrypi kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Fri Jul 19 01:15:04 BST 2019 machine -m: armv7l processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:16:92:03 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=4af42e7a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash lapic noxsave acpi_osi= isolcpus=1,2,3 idle=poll acpi_irq_nobalance noirqbalance vmalloc=32MB clocksource=acpi_pm net.ifnames=0 model name: ARMv7 Processor rev 3 (v7l) cores: cpu MHz: parport: serial: Versions: gcc: gcc (Raspbian 8.3.0-6+rpi1) 8.3.0 python: Python 2.7.16 git: git version 2.20.1 git commit: ae6e7e00a tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0~pre0 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /home/pi/linuxcnc-rp10/scripts/realtime RTS: uspace HALLIB_DIR: /home/pi/linuxcnc-rp10/lib/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===============-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.8.0~pre1 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) ii linuxcnc-uspace 1:2.8.0~pre1 armhf motion controller for CNC machines and robots