[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ef71000 (usable) [ 0.000000] BIOS-e820: 000000007ef71000 - 000000007efb2000 (reserved) [ 0.000000] BIOS-e820: 000000007efb2000 - 000000007efbd000 (ACPI data) [ 0.000000] BIOS-e820: 000000007efbd000 - 000000007f072000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f072000 - 000000007f2fb000 (reserved) [ 0.000000] BIOS-e820: 000000007f2fb000 - 000000007f52b000 (usable) [ 0.000000] BIOS-e820: 000000007f52b000 - 000000007f6e4000 (reserved) [ 0.000000] BIOS-e820: 000000007f6e4000 - 000000007f6f0000 (usable) [ 0.000000] BIOS-e820: 000000007f6f0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.7 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7f6f0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 write-through [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ef71000 (usable) [ 0.000000] modified: 000000007ef71000 - 000000007efb2000 (reserved) [ 0.000000] modified: 000000007efb2000 - 000000007efbd000 (ACPI data) [ 0.000000] modified: 000000007efbd000 - 000000007f072000 (ACPI NVS) [ 0.000000] modified: 000000007f072000 - 000000007f2fb000 (reserved) [ 0.000000] modified: 000000007f2fb000 - 000000007f52b000 (usable) [ 0.000000] modified: 000000007f52b000 - 000000007f6e4000 (reserved) [ 0.000000] modified: 000000007f6e4000 - 000000007f6f0000 (usable) [ 0.000000] modified: 000000007f6f0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37369000 - 37fef195 [ 0.000000] Allocated new RAMDISK: 008b5000 - 0153b195 [ 0.000000] Move RAMDISK from 0000000037369000 - 0000000037fef194 to 008b5000 - 0153b194 [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 7efb4078 0006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 7efbc258 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 7efb4170 080E6 (v02 ALASKA A M I 00000016 INTL 20051117) [ 0.000000] ACPI: FACS 7f06bf80 00040 [ 0.000000] ACPI: APIC 7efbc350 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 7efbc3c8 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 7efbc410 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 7efbc450 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 7efbc488 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7efbcae0 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7efbcd40 0020F (v01 PmRef ApTst 00003000 INTL 20051117) [ 0.000000] ACPI: IFEU 7efbcf50 00042 (v01 ALASKA A M I 01072009 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b419e] BRK ==> [00008b1000 - 00008b419e] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008b5000 - 000153b195] NEW RAMDISK ==> [00008b5000 - 000153b195] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00fd6d0] fd6d0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f6f0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ef71 [ 0.000000] 0: 0x0007f2fb -> 0x0007f52b [ 0.000000] 0: 0x0007f6e4 -> 0x0007f6f0 [ 0.000000] On node 0 totalpages: 520508 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c153d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 290993 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c2800000 s74936 r0 d23368 u1048576 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516430 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=14838aac-fa6e-4a48-963d-9bb1b921b78c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10439040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6f0) [ 0.000000] Memory: 2032632k/2087872k available (4539k kernel code, 48464k reserved, 1928k data, 620k init, 1173180k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration failed [ 0.012000] TSC: Unable to calibrate against PIT [ 0.012000] TSC: using PMTIMER reference calibration [ 0.012000] Detected 1861.997 MHz processor. [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.99 BogoMIPS (lpj=7447988) [ 0.000039] Security Framework initialized [ 0.000078] AppArmor: AppArmor initialized [ 0.000092] Mount-cache hash table entries: 512 [ 0.000284] Initializing cgroup subsys ns [ 0.000291] Initializing cgroup subsys cpuacct [ 0.000300] Initializing cgroup subsys memory [ 0.000311] Initializing cgroup subsys devices [ 0.000316] Initializing cgroup subsys freezer [ 0.000321] Initializing cgroup subsys net_cls [ 0.000349] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.000355] CPU: L2 cache: 512K [ 0.000359] CPU: Physical Processor ID: 0 [ 0.000363] CPU: Processor Core ID: 0 [ 0.000368] mce: CPU supports 5 MCE banks [ 0.000379] CPU0: Thermal monitoring enabled (TM1) [ 0.000391] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.000405] ... version: 3 [ 0.000408] ... bit width: 40 [ 0.000412] ... generic registers: 2 [ 0.000416] ... value mask: 000000ffffffffff [ 0.000420] ... max period: 000000007fffffff [ 0.000424] ... fixed-purpose events: 3 [ 0.000428] ... event mask: 0000000700000003 [ 0.000436] Checking 'hlt' instruction... OK. [ 0.013779] ACPI: Core revision 20090903 [ 0.033188] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.033198] ftrace: allocating 21003 entries in 42 pages [ 0.040591] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040946] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.080569] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.080573] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.080577] ..... (found apic 0 pin 0) ... [ 0.120215] ....... works. [ 0.120219] CPU0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz stepping 01 [ 0.224866] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.234889] Initializing CPU#1 [ 0.312414] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.312420] CPU: L2 cache: 512K [ 0.312424] CPU: Physical Processor ID: 0 [ 0.312428] CPU: Processor Core ID: 0 [ 0.312442] CPU1: Thermal monitoring enabled (TM1) [ 0.312495] CPU1: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz stepping 01 [ 0.312518] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.332685] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.342621] Initializing CPU#2 [ 0.420233] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.420238] CPU: L2 cache: 512K [ 0.420242] CPU: Physical Processor ID: 0 [ 0.420245] CPU: Processor Core ID: 1 [ 0.420260] CPU2: Thermal monitoring enabled (TM1) [ 0.420295] CPU2: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz stepping 01 [ 0.420315] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.440442] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.450380] Initializing CPU#3 [ 0.528054] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.528058] CPU: L2 cache: 512K [ 0.528062] CPU: Physical Processor ID: 0 [ 0.528065] CPU: Processor Core ID: 1 [ 0.528077] CPU3: Thermal monitoring enabled (TM1) [ 0.528152] CPU3: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz stepping 01 [ 0.528173] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.548167] Brought up 4 CPUs [ 0.548173] Total of 4 processors activated (14896.80 BogoMIPS). [ 0.548502] CPU0 attaching sched-domain: [ 0.548510] domain 0: span 0-1 level SIBLING [ 0.548515] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.548527] domain 1: span 0-1 level MC [ 0.548532] groups: 0-1 (cpu_power = 1178) [ 0.548541] domain 2: span 0-3 level CPU [ 0.548546] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.548562] CPU1 attaching sched-domain: [ 0.548567] domain 0: span 0-1 level SIBLING [ 0.548571] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.548582] domain 1: span 0-1 level MC [ 0.548587] groups: 0-1 (cpu_power = 1178) [ 0.548595] domain 2: span 0-3 level CPU [ 0.548600] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.548612] CPU2 attaching sched-domain: [ 0.548616] domain 0: span 2-3 level SIBLING [ 0.548621] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 0.548632] domain 1: span 2-3 level MC [ 0.548636] groups: 2-3 (cpu_power = 1178) [ 0.548645] domain 2: span 0-3 level CPU [ 0.548649] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.548661] CPU3 attaching sched-domain: [ 0.548666] domain 0: span 2-3 level SIBLING [ 0.548670] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 0.548681] domain 1: span 2-3 level MC [ 0.548686] groups: 2-3 (cpu_power = 1178) [ 0.548694] domain 2: span 0-3 level CPU [ 0.548699] groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.549385] devtmpfs: initialized [ 0.550052] regulator: core version 0.5 [ 0.550146] NET: Registered protocol family 16 [ 0.550370] Trying to unpack rootfs image as initramfs... [ 0.550427] EISA bus registered [ 0.550443] ACPI: bus type pci registered [ 0.550561] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.550568] PCI: MCFG area at e0000000 reserved in E820 [ 0.550572] PCI: Using MMCONFIG for extended config space [ 0.550576] PCI: Using configuration type 1 for base access [ 0.552409] bio: create slab at 0 [ 0.554587] ACPI: EC: Look up EC in DSDT [ 0.560838] ACPI: Executed 1 blocks of module-level executable AML code [ 0.565540] ACPI: BIOS _OSI(Linux) query ignored [ 0.569968] ACPI: Interpreter enabled [ 0.569974] ACPI: (supports S0 S5) [ 0.570001] ACPI: Using IOAPIC for interrupt routing [ 0.588544] ACPI: Power Resource [FN00] (off) [ 0.589014] ACPI: No dock devices found. [ 0.590438] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.590577] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfc00000-0xdfcfffff] [ 0.590586] pci 0000:00:02.0: reg 14 io port: [0xf0f0-0xf0f7] [ 0.590727] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdff00000-0xdff03fff] [ 0.590811] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.590819] pci 0000:00:1b.0: PME# disabled [ 0.590945] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.590953] pci 0000:00:1c.0: PME# disabled [ 0.591084] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.591092] pci 0000:00:1c.3: PME# disabled [ 0.591181] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f] [ 0.591266] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f] [ 0.591354] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f] [ 0.591439] pci 0000:00:1d.3: reg 20 io port: [0xf020-0xf03f] [ 0.591536] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff05000-0xdff053ff] [ 0.591618] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.591626] pci 0000:00:1d.7: PME# disabled [ 0.591893] pci 0000:00:1f.2: reg 10 io port: [0xf0e0-0xf0e7] [ 0.591906] pci 0000:00:1f.2: reg 14 io port: [0xf0d0-0xf0d3] [ 0.591919] pci 0000:00:1f.2: reg 18 io port: [0xf0c0-0xf0c7] [ 0.591932] pci 0000:00:1f.2: reg 1c io port: [0xf0b0-0xf0b3] [ 0.591963] pci 0000:00:1f.2: reg 20 io port: [0xf0a0-0xf0af] [ 0.591976] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdff04000-0xdff043ff] [ 0.592017] pci 0000:00:1f.2: PME# supported from D3hot [ 0.592025] pci 0000:00:1f.2: PME# disabled [ 0.592100] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 0.592206] pci 0000:01:00.0: reg 10 io port: [0xe000-0xe0ff] [ 0.592236] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xdfe04000-0xdfe04fff] [ 0.592257] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xdfe00000-0xdfe03fff] [ 0.592322] pci 0000:01:00.0: supports D1 D2 [ 0.592326] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.592335] pci 0000:01:00.0: PME# disabled [ 0.592435] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff] [ 0.592443] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 0.592597] pci 0000:03:00.0: reg 10 io port: [0xd030-0xd037] [ 0.592609] pci 0000:03:00.0: reg 14 io port: [0xd020-0xd027] [ 0.592622] pci 0000:03:00.0: reg 18 32bit mmio: [0xdfd03000-0xdfd03fff] [ 0.592642] pci 0000:03:00.0: reg 20 32bit mmio: [0xdfd02000-0xdfd02fff] [ 0.592688] pci 0000:03:00.0: PME# supported from D0 D3cold [ 0.592696] pci 0000:03:00.0: PME# disabled [ 0.592752] pci 0000:03:00.2: reg 10 io port: [0xd010-0xd017] [ 0.592764] pci 0000:03:00.2: reg 14 io port: [0xd000-0xd007] [ 0.592777] pci 0000:03:00.2: reg 18 32bit mmio: [0xdfd01000-0xdfd01fff] [ 0.592796] pci 0000:03:00.2: reg 20 32bit mmio: [0xdfd00000-0xdfd00fff] [ 0.592842] pci 0000:03:00.2: PME# supported from D0 D3cold [ 0.592850] pci 0000:03:00.2: PME# disabled [ 0.592931] pci 0000:00:1e.0: transparent bridge [ 0.592939] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.592947] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff] [ 0.592984] pci_bus 0000:00: on NUMA node 0 [ 0.592998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.593217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.593431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.593598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.609562] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.609796] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.610024] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.610246] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.610469] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.610696] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.610925] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.611150] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.611374] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.611393] vgaarb: loaded [ 0.611632] SCSI subsystem initialized [ 0.611932] libata version 3.00 loaded. [ 0.612103] usbcore: registered new interface driver usbfs [ 0.612130] usbcore: registered new interface driver hub [ 0.612208] usbcore: registered new device driver usb [ 0.612498] ACPI: WMI: Mapper loaded [ 0.612503] PCI: Using ACPI for IRQ routing [ 0.612773] NetLabel: Initializing [ 0.612778] NetLabel: domain hash size = 128 [ 0.612781] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.612803] NetLabel: unlabeled traffic allowed by default [ 0.612888] Switching to clocksource tsc [ 0.618429] AppArmor: AppArmor Filesystem Enabled [ 0.618468] pnp: PnP ACPI init [ 0.618508] ACPI: bus type pnp registered [ 0.630053] pnp: PnP ACPI: found 14 devices [ 0.630063] ACPI: ACPI bus type pnp unregistered [ 0.630071] PnPBIOS: Disabled by ACPI PNP [ 0.630108] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.630131] system 00:05: ioport range 0x680-0x69f has been reserved [ 0.630142] system 00:05: ioport range 0x1000-0x100f has been reserved [ 0.630152] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.630162] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.630171] system 00:05: ioport range 0x400-0x47f has been reserved [ 0.630179] system 00:05: ioport range 0x500-0x57f has been reserved [ 0.630188] system 00:05: ioport range 0x600-0x61f has been reserved [ 0.630206] system 00:06: ioport range 0x6a0-0x6af has been reserved [ 0.630214] system 00:06: ioport range 0x6b0-0x6ef has been reserved [ 0.630231] system 00:08: ioport range 0xa00-0xa1f has been reserved [ 0.630239] system 00:08: ioport range 0xa30-0xa3f has been reserved [ 0.630258] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved [ 0.630275] system 00:0d: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.630286] system 00:0d: iomem range 0x0-0x3fff could not be reserved [ 0.630295] system 00:0d: iomem range 0x0-0xfff could not be reserved [ 0.630304] system 00:0d: iomem range 0x0-0xfff could not be reserved [ 0.630313] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.665370] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.665382] pci 0000:00:1c.0: IO window: 0xe000-0xefff [ 0.665394] pci 0000:00:1c.0: MEM window: 0xdfe00000-0xdfefffff [ 0.665406] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff [ 0.665421] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02 [ 0.665430] pci 0000:00:1c.3: IO window: 0x2000-0x2fff [ 0.665442] pci 0000:00:1c.3: MEM window: 0x80200000-0x803fffff [ 0.665453] pci 0000:00:1c.3: PREFETCH window: 0x00000080400000-0x000000805fffff [ 0.665469] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.665477] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.665489] pci 0000:00:1e.0: MEM window: 0xdfd00000-0xdfdfffff [ 0.665499] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.665533] alloc irq_desc for 16 on node -1 [ 0.665539] alloc kstat_irqs on node -1 [ 0.665558] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.665569] pci 0000:00:1c.0: setting latency timer to 64 [ 0.665589] alloc irq_desc for 19 on node -1 [ 0.665594] alloc kstat_irqs on node -1 [ 0.665606] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.665617] pci 0000:00:1c.3: setting latency timer to 64 [ 0.665634] pci 0000:00:1e.0: setting latency timer to 64 [ 0.665645] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.665655] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.665663] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.665671] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff] [ 0.665679] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x801fffff] [ 0.665687] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.665694] pci_bus 0000:02: resource 1 mem: [0x80200000-0x803fffff] [ 0.665702] pci_bus 0000:02: resource 2 pref mem [0x80400000-0x805fffff] [ 0.665710] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.665717] pci_bus 0000:03: resource 1 mem: [0xdfd00000-0xdfdfffff] [ 0.665725] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.665732] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.665819] NET: Registered protocol family 2 [ 0.666062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.666851] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.667850] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.668405] TCP: Hash tables configured (established 131072 bind 65536) [ 0.668415] TCP reno registered [ 0.668648] NET: Registered protocol family 1 [ 0.668691] pci 0000:00:02.0: Boot video device [ 0.688862] Scanning for low memory corruption every 60 seconds [ 0.689104] audit: initializing netlink socket (disabled) [ 0.689127] type=2000 audit(1559931382.510:1): initialized [ 0.704785] highmem bounce pool size: 64 pages [ 0.704796] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.708026] VFS: Disk quotas dquot_6.5.2 [ 0.708150] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.709368] fuse init (API version 7.13) [ 0.709552] msgmni has been set to 1680 [ 0.710134] alg: No test for stdrng (krng) [ 0.710265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.710272] io scheduler noop registered [ 0.710276] io scheduler anticipatory registered [ 0.710280] io scheduler deadline registered [ 0.710366] io scheduler cfq registered (default) [ 0.710618] alloc irq_desc for 24 on node -1 [ 0.710623] alloc kstat_irqs on node -1 [ 0.710641] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.710658] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.710893] alloc irq_desc for 25 on node -1 [ 0.710898] alloc kstat_irqs on node -1 [ 0.710913] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X [ 0.710929] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.711102] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.711621] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 [ 0.711700] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.711741] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0 [ 0.711824] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.711842] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.712012] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.712025] ACPI: Power Button [PWRB] [ 0.712111] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.712117] ACPI: Sleep Button [SLPB] [ 0.712200] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.712206] ACPI: Power Button [PWRF] [ 0.712370] isapnp: Scanning for PnP cards... [ 0.716154] hpet_acpi_add: no address or irqs in _CRS [ 0.716301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.716467] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.716654] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.717280] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.717533] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.720345] brd: module loaded [ 0.721638] loop: module loaded [ 0.721866] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.722074] ata_piix 0000:00:1f.2: version 2.13 [ 0.722105] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.722119] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.875509] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.875698] scsi0 : ata_piix [ 0.875920] scsi1 : ata_piix [ 0.876023] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 [ 0.876030] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 [ 0.876969] Fixed MDIO Bus: probed [ 0.877070] PPP generic driver version 2.4.2 [ 0.877177] tun: Universal TUN/TAP device driver, 1.6 [ 0.877183] tun: (C) 1999-2004 Max Krasnyansky [ 0.877390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.877431] alloc irq_desc for 23 on node -1 [ 0.877437] alloc kstat_irqs on node -1 [ 0.877451] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.877481] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.877489] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.877582] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.877625] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.877646] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.881547] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.881584] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff05000 [ 0.895458] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.895692] usb usb1: configuration #1 chosen from 1 choice [ 0.895768] hub 1-0:1.0: USB hub found [ 0.895789] hub 1-0:1.0: 8 ports detected [ 0.895934] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.895970] uhci_hcd: USB Universal Host Controller Interface driver [ 0.896037] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.896052] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.896060] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.896147] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.896191] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 0.896421] usb usb2: configuration #1 chosen from 1 choice [ 0.896490] hub 2-0:1.0: USB hub found [ 0.896507] hub 2-0:1.0: 2 ports detected [ 0.896603] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.896617] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.896625] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.896706] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.896748] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 0.896962] usb usb3: configuration #1 chosen from 1 choice [ 0.897029] hub 3-0:1.0: USB hub found [ 0.897046] hub 3-0:1.0: 2 ports detected [ 0.897140] alloc irq_desc for 18 on node -1 [ 0.897146] alloc kstat_irqs on node -1 [ 0.897161] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.897174] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.897182] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.897267] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.897324] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 0.897543] usb usb4: configuration #1 chosen from 1 choice [ 0.897611] hub 4-0:1.0: USB hub found [ 0.897628] hub 4-0:1.0: 2 ports detected [ 0.897736] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.897749] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.897757] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.897847] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.897903] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 [ 0.898129] usb usb5: configuration #1 chosen from 1 choice [ 0.898197] hub 5-0:1.0: USB hub found [ 0.898216] hub 5-0:1.0: 2 ports detected [ 0.898451] PNP: No PS/2 controller found. Probing ports directly. [ 0.898961] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.898980] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.899198] mice: PS/2 mouse device common for all mice [ 0.899547] rtc_cmos 00:07: RTC can wake from S4 [ 0.899647] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.899688] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.899979] device-mapper: uevent: version 1.0.3 [ 0.900258] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.900583] device-mapper: multipath: version 1.1.0 loaded [ 0.900593] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.900969] EISA: Probing bus 0 at eisa.0 [ 0.900983] Cannot allocate resource for EISA slot 1 [ 0.900989] Cannot allocate resource for EISA slot 2 [ 0.901027] EISA: Detected 0 cards. [ 0.901033] cpuidle: using governor ladder [ 0.901039] cpuidle: using governor menu [ 0.902169] TCP cubic registered [ 0.902656] NET: Registered protocol family 10 [ 0.903819] lo: Disabled Privacy Extensions [ 0.904631] NET: Registered protocol family 17 [ 0.904711] Using IPI No-Shortcut mode [ 0.904958] registered taskstats version 1 [ 0.905645] rtc_cmos 00:07: setting system clock to 2019-06-07 18:16:23 UTC (1559931383) [ 0.905656] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.905662] EDD information not available. [ 1.056122] ata2.00: ATA-8: ST250DM000-1BD141, KC48, max UDMA/133 [ 1.056131] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.065850] isapnp: No Plug & Play device found [ 1.071986] ata2.00: configured for UDMA/133 [ 1.072192] scsi 1:0:0:0: Direct-Access ATA ST250DM000-1BD14 KC48 PQ: 0 ANSI: 5 [ 1.072484] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.072492] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.072507] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.072668] sd 1:0:0:0: [sda] Write Protect is off [ 1.072674] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.072742] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.073089] sda: sda1 sda2 < [ 1.085651] Freeing initrd memory: 12824k freed [ 1.110606] sda5 > [ 1.111197] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.111226] Freeing unused kernel memory: 620k freed [ 1.111669] Write protecting the kernel text: 4540k [ 1.111717] Write protecting the kernel read-only data: 1668k [ 1.147756] udev: starting version 151 [ 1.226279] vga16fb: initializing [ 1.226290] vga16fb: mapped to 0xc00a0000 [ 1.226445] fb0: VGA16 VGA frame buffer device [ 1.292622] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.292665] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.292742] r8169 0000:01:00.0: setting latency timer to 64 [ 1.292756] r8169 0000:01:00.0: unknown MAC, using family default [ 1.292822] alloc irq_desc for 26 on node -1 [ 1.292829] alloc kstat_irqs on node -1 [ 1.292859] r8169 0000:01:00.0: irq 26 for MSI/MSI-X [ 1.294458] eth0: RTL8168b/8111b at 0xf809e000, 74:27:ea:d1:66:ac, XID 0c200000 IRQ 26 [ 1.443829] Console: switching to colour frame buffer device 80x30 [ 1.584703] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.750045] usb 2-1: configuration #1 chosen from 1 choice [ 1.776105] usbcore: registered new interface driver hiddev [ 1.791351] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 1.791556] generic-usb 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0 [ 1.791605] usbcore: registered new interface driver usbhid [ 1.791611] usbhid: v2.6:USB HID core driver [ 1.801739] xor: automatically using best checksumming function: pIII_sse [ 1.819781] pIII_sse : 5743.000 MB/sec [ 1.819787] xor: using function: pIII_sse (5743.000 MB/sec) [ 1.825712] device-mapper: dm-raid45: initialized v0.2594b [ 1.995021] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 2.055761] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.211175] usb 2-2: configuration #1 chosen from 1 choice [ 2.227639] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 [ 2.227839] generic-usb 0003:1A2C:0C21.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1d.0-2/input0 [ 2.250609] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input6 [ 2.250814] generic-usb 0003:1A2C:0C21.0003: input,hidraw2: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:1d.0-2/input1 [ 2.487155] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.673934] usb 3-1: configuration #1 chosen from 1 choice [ 7.955678] udev: starting version 151 [ 8.025136] lp: driver loaded but no devices found [ 8.033219] Adding 5996536k swap on /dev/sda5. Priority:-1 extents:1 across:5996536k [ 8.272013] type=1505 audit(1559931390.876:2): operation="profile_load" pid=561 name="/sbin/dhclient3" [ 8.272754] type=1505 audit(1559931390.876:3): operation="profile_load" pid=561 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 8.273418] type=1505 audit(1559931390.880:4): operation="profile_load" pid=561 name="/usr/lib/connman/scripts/dhclient-script" [ 8.341551] parport_pc 00:0b: reported by Plug and Play ACPI [ 8.341627] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 8.352547] Registered led device: xpad0 [ 8.352704] input: Generic X-Box pad as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7 [ 8.352970] usbcore: registered new interface driver xpad [ 8.352980] xpad: X-Box pad driver [ 8.403491] ppdev: user-space parallel port driver [ 8.443159] lp0: using parport0 (interrupt-driven). [ 8.624524] alloc irq_desc for 22 on node -1 [ 8.624533] alloc kstat_irqs on node -1 [ 8.624555] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.624714] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 35.827644] type=1505 audit(1559931418.479:5): operation="profile_load" pid=849 name="/usr/share/gdm/guest-session/Xsession" [ 35.834032] type=1505 audit(1559931418.487:6): operation="profile_replace" pid=850 name="/sbin/dhclient3" [ 35.834779] type=1505 audit(1559931418.487:7): operation="profile_replace" pid=850 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 35.835217] type=1505 audit(1559931418.487:8): operation="profile_replace" pid=850 name="/usr/lib/connman/scripts/dhclient-script" [ 35.835722] type=1505 audit(1559931418.487:9): operation="profile_load" pid=853 name="/usr/lib/cups/backend/cups-pdf" [ 35.836698] type=1505 audit(1559931418.487:10): operation="profile_load" pid=853 name="/usr/sbin/cupsd" [ 35.840816] type=1505 audit(1559931418.491:11): operation="profile_load" pid=854 name="/usr/sbin/tcpdump" [ 35.861492] type=1505 audit(1559931418.515:12): operation="profile_load" pid=851 name="/usr/bin/evince" [ 35.870372] type=1505 audit(1559931418.523:13): operation="profile_load" pid=851 name="/usr/bin/evince-previewer" [ 35.876347] type=1505 audit(1559931418.527:14): operation="profile_load" pid=851 name="/usr/bin/evince-thumbnailer" [ 35.897577] r8169: eth0: link down [ 35.900136] ADDRCONF(NETDEV_UP): eth0: link is not ready