Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.0-36-ge08d61243 Machine configuration directory is '/home/cnc/linuxcnc/configs/Prueba' Machine configuration file is 'Prueba.ini' INIFILE=/home/cnc/linuxcnc/configs/Prueba/Prueba.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYYZ KINEMATICS=trivkins coordinates=XYYZ kinstype=BOTH Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./Prueba.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 74 cycles, min=0.000057, max=0.010308, avg=0.008095, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:04:00.0 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin TxData0 (Output) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin RxData0 (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:04:00.0 hm2_5i25.0: dropping AnyIO board at 0000:04:00.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime note: MAXV max: 25.000 units/sec 1500.000 units/min note: LJOG max: 25.000 units/sec 1500.000 units/min note: LJOG default: 6.000 units/sec 360.000 units/min Traceback (most recent call last): File "/usr/bin/axis", line 3537, in duplicate_coord_letters) UnicodeEncodeError: 'ascii' codec can't encode character u'\xe1' in position 21: ordinal not in range(128) 1988 2016 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7efc8c16b000 Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: mar 15 sep 2020 08:44:42 CEST UTC Date: mar 15 sep 2020 06:44:42 UTC this program: /usr/bin/linuxcnc_info uptime: 08:44:42 up 3 min, 1 user, load average: 1,41, 1,38, 0,61 lsb_release -sa: Linuxmint Linux Mint 20 20 ulyana which linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/Prueba USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: es_ES TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: mate display size: 1280x1024 pixels (338x270 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/Prueba/bin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games uname items: nodename -n: MintMate kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.9.228-1 (2020-07-05) machine -m: x86_64 processor -p: x86_64 platform -i: x86_64 oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.9.0-13-rt-amd64 root=UUID=49f73e69-8368-4958-b072-b512525c4cf4 ro quiet splash model name: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz cores: 2 cpu MHz: 1467.000 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial Versions: gcc: gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0 python: Python 2.7.18rc1 git: git version 2.25.1 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.0-36-ge08d61243 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Deseado=desconocido(U)/Instalar/eliminaR/Purgar/retener(H) | Estado=No/Inst/ficheros-Conf/desempaqUetado/medio-conF/medio-inst(H)/espera-disparo(W)/pendienTe-disparo |/ Err?=(ninguno)/requiere-Reinst (Estado,Err: mayúsc.=malo) ||/ Nombre Versión Arquitectura Descripción +++-===============-=====================-============-===================================================================== un linuxcnc (no hay ninguna descripción disponible) un linuxcnc-doc (no hay ninguna descripción disponible) ii linuxcnc-doc-en 1:2.8.0.36.ge08d61243 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no hay ninguna descripción disponible) ii linuxcnc-uspace 1:2.8.0.36.ge08d61243 amd64 motion controller for CNC machines and robots