Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.4-1-gb7824717b Machine configuration directory is '/home/bobwolf/linuxcnc/configs/fresa_cnc_2' Machine configuration file is 'fresa_cnc_2.ini' INIFILE=/home/bobwolf/linuxcnc/configs/fresa_cnc_2/fresa_cnc_2.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./fresa_cnc_2.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis hm2: loading Mesa HostMot2 driver version 0.15 hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3 hm2/hm2_7i43.0: Low Level init 0.15 hm2/hm2_7i43.0: 48 I/O Pins used: hm2/hm2_7i43.0: IO Pin 000 (P4-01): IOPort hm2/hm2_7i43.0: IO Pin 001 (P4-03): IOPort hm2/hm2_7i43.0: IO Pin 002 (P4-05): IOPort hm2/hm2_7i43.0: IO Pin 003 (P4-07): IOPort hm2/hm2_7i43.0: IO Pin 004 (P4-09): IOPort hm2/hm2_7i43.0: IO Pin 005 (P4-11): IOPort hm2/hm2_7i43.0: IO Pin 006 (P4-13): IOPort hm2/hm2_7i43.0: IO Pin 007 (P4-15): IOPort hm2/hm2_7i43.0: IO Pin 008 (P4-17): IOPort hm2/hm2_7i43.0: IO Pin 009 (P4-19): IOPort hm2/hm2_7i43.0: IO Pin 010 (P4-21): IOPort hm2/hm2_7i43.0: IO Pin 011 (P4-23): IOPort hm2/hm2_7i43.0: IO Pin 012 (P4-25): IOPort hm2/hm2_7i43.0: IO Pin 013 (P4-27): IOPort hm2/hm2_7i43.0: IO Pin 014 (P4-29): IOPort hm2/hm2_7i43.0: IO Pin 015 (P4-31): IOPort hm2/hm2_7i43.0: IO Pin 016 (P4-33): IOPort hm2/hm2_7i43.0: IO Pin 017 (P4-35): IOPort hm2/hm2_7i43.0: IO Pin 018 (P4-37): IOPort hm2/hm2_7i43.0: IO Pin 019 (P4-39): IOPort hm2/hm2_7i43.0: IO Pin 020 (P4-41): IOPort hm2/hm2_7i43.0: IO Pin 021 (P4-43): IOPort hm2/hm2_7i43.0: IO Pin 022 (P4-45): IOPort hm2/hm2_7i43.0: IO Pin 023 (P4-47): IOPort hm2/hm2_7i43.0: IO Pin 024 (P3-01): StepGen #0, pin Step (Output) hm2/hm2_7i43.0: IO Pin 025 (P3-03): StepGen #0, pin Direction (Output) hm2/hm2_7i43.0: IO Pin 026 (P3-05): IOPort hm2/hm2_7i43.0: IO Pin 027 (P3-07): IOPort hm2/hm2_7i43.0: IO Pin 028 (P3-09): IOPort hm2/hm2_7i43.0: IO Pin 029 (P3-11): IOPort hm2/hm2_7i43.0: IO Pin 030 (P3-13): StepGen #1, pin Step (Output) hm2/hm2_7i43.0: IO Pin 031 (P3-15): StepGen #1, pin Direction (Output) hm2/hm2_7i43.0: IO Pin 032 (P3-17): IOPort hm2/hm2_7i43.0: IO Pin 033 (P3-19): IOPort hm2/hm2_7i43.0: IO Pin 034 (P3-21): IOPort hm2/hm2_7i43.0: IO Pin 035 (P3-23): IOPort hm2/hm2_7i43.0: IO Pin 036 (P3-25): StepGen #2, pin Step (Output) hm2/hm2_7i43.0: IO Pin 037 (P3-27): StepGen #2, pin Direction (Output) hm2/hm2_7i43.0: IO Pin 038 (P3-29): IOPort hm2/hm2_7i43.0: IO Pin 039 (P3-31): IOPort hm2/hm2_7i43.0: IO Pin 040 (P3-33): IOPort hm2/hm2_7i43.0: IO Pin 041 (P3-35): IOPort hm2/hm2_7i43.0: IO Pin 042 (P3-37): StepGen #3, pin Step (Output) hm2/hm2_7i43.0: IO Pin 043 (P3-39): StepGen #3, pin Direction (Output) hm2/hm2_7i43.0: IO Pin 044 (P3-41): IOPort hm2/hm2_7i43.0: IO Pin 045 (P3-43): IOPort hm2/hm2_7i43.0: IO Pin 046 (P3-45): IOPort hm2/hm2_7i43.0: IO Pin 047 (P3-47): IOPort hm2/hm2_7i43.0: registered hm2_7i43.0: board at (ioaddr=0xE030, ioaddr_hi=0xE020, epp_wide OFF) found USRMOT: ERROR: command timeout emcMotionInit: emcTrajInit failed USRMOT: ERROR: command timeout emcMotionInit: emcTrajInit failed USRMOT: ERROR: command timeout emcMotionInit: emcTrajInit failed waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> Shutting down and cleaning up LinuxCNC... Running HAL shutdown script USRMOT: ERROR: command timeout Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime rtapi_app: caught signal 11 - dumping core note: MAXV max: 41.667 units/sec 2500.000 units/min note: LJOG max: 41.667 units/sec 2500.000 units/min note: LJOG default: 33.333 units/sec 2000.000 units/min Waiting for component 'inihal' to become ready.................................A configuration error is preventing LinuxCNC from starting. More information may be available when running from a terminal. ..9615 9661 ..........HAL: ERROR: exit called before init :0: waitpid failed milltask inihal :0: milltask exited without becoming ready Stopping realtime threads Unloading hal components Waited 3 seconds for master. giving up. Note: Using POSIX realtime rc_gen: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime debounce: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime mult2: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime encoder: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime and2: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime edge: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime flipflop: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime not: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime timedelay: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime or2: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime select8: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime updown: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime conv_s32_float: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime conv_float_s32: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime sample_hold: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime comp: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime pid: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime hm2_7i43: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime hostmot2: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime motmod: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 Note: Using POSIX realtime trivkins: not loaded :0: exit value: 255 :0: rmmod failed, returned -1 :0: unloadrt failed Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Wed 03 Jan 2024 08:50:01 PM CET UTC Date: Wed 03 Jan 2024 07:50:01 PM UTC this program: /usr/bin/linuxcnc_info uptime: 20:50:01 up 10:26, 1 user, load average: 0.61, 0.33, 0.33 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster which linuxcnc: /usr/bin/linuxcnc pwd: /home/bobwolf/linuxcnc/configs/fresa_cnc_2 USER: bobwolf LOGNAME: bobwolf HOME: /home/bobwolf EDITOR: VISUAL: LANGUAGE: en_US:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1280x1024 pixels (338x270 millimeters) PATH: /usr/bin:/home/bobwolf/linuxcnc/configs/fresa_cnc_2/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: fresacnc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.289-2 (2023-08-08) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-25-rt-amd64 root=UUID=f5afd7dc-f1a6-41ed-b488-72426d98e83e ro quiet model name: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz cores: 4 cpu MHz: 1611.726 parport: 0000-0000 : parport1 0000-0000 : parport1 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 2.7.16 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.4-1-gb7824717b LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-====================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.8.4.1.gb7824717b all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.8.4.1.gb7824717b all controlador de movimiento para máquinas CNC y robots (Español). ii linuxcnc-doc-fr 1:2.8.4.1.gb7824717b all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.8.4.1.gb7824717b amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.4.1.gb7824717b amd64 PC based motion controller for real-time Linux